AMIGA revision 1.61.2.3
1 1.61.2.3 skrll # $NetBSD: AMIGA,v 1.61.2.3 2004/09/21 13:12:17 skrll Exp $ 2 1.9 is # 3 1.53 lukem # This file was automatically created. 4 1.53 lukem # Changes will be lost when make is run in this directory. 5 1.9 is # 6 1.61.2.1 skrll # Created from: # NetBSD: GENERIC.in,v 1.23 2004/06/28 21:07:47 bouyer Exp $ 7 1.53 lukem # 8 1.53 lukem # GENERIC machine description file 9 1.53 lukem # 10 1.53 lukem # This machine description file is used to generate the default NetBSD 11 1.53 lukem # kernel. The generic kernel does not include all options, subsystems 12 1.53 lukem # and device drivers, but should be useful for most applications. 13 1.53 lukem # 14 1.53 lukem # The machine description file can be customised for your specific 15 1.53 lukem # machine to reduce the kernel size and improve its performance. 16 1.53 lukem # 17 1.53 lukem # For further information on compiling NetBSD kernels, see the config(8) 18 1.53 lukem # man page. 19 1.53 lukem # 20 1.53 lukem # For further information on hardware support for this architecture, see 21 1.53 lukem # the intro(4) man page. For further information about kernel options 22 1.53 lukem # for this architecture, see the options(4) man page. For an explanation 23 1.53 lukem # of each device driver in this file see the section 4 man page for the 24 1.53 lukem # device. 25 1.40 jandberg 26 1.40 jandberg 27 1.9 is include "arch/amiga/conf/std.amiga" 28 1.9 is 29 1.50 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 1.50 atatat 31 1.61.2.3 skrll #ident "GENERIC-$Revision: 1.61.2.3 $" 32 1.53 lukem 33 1.25 mhitch 34 1.9 is maxusers 8 35 1.9 is options RTC_OFFSET=0 36 1.9 is 37 1.53 lukem # 38 1.53 lukem # mainboards to support (in addition to Amiga) 39 1.53 lukem # 40 1.9 is options BB060STUPIDROM # You need this, if you have a non-DraCo 41 1.39 lukem # MC68060 with an OS ROM up to (at least) 42 1.12 is # V40 (OS3.1) and want to boot with the 43 1.12 is # bootblock. 44 1.12 is # You do not need this if you have a DraCo, 45 1.12 is # have no 68060 or NEVER use the bootblock 46 1.39 lukem options P5PPC68KBOARD # Phase5 PPC/68K board support 47 1.53 lukem # 48 1.53 lukem # processors this kernel should support 49 1.53 lukem # 50 1.9 is options M68060 # support for 060 51 1.9 is options M060SP # MC68060 software support (Required for 060) 52 1.9 is options M68040 # support for 040 53 1.9 is options FPSP # MC68040 floating point support 54 1.9 is options M68030 # support for 030 55 1.9 is options M68020 # support for 020/851 56 1.9 is options FPU_EMULATE # FPU emulation 57 1.9 is 58 1.53 lukem # 59 1.53 lukem # Networking options 60 1.53 lukem # 61 1.9 is options INET # IP networking support (Required) 62 1.23 is options INET6 # IPV6 63 1.23 is #options IPSEC # IP security 64 1.23 is #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65 1.23 is #options IPSEC_DEBUG # debug for IP security 66 1.9 is #options GATEWAY # Packet forwarding 67 1.9 is #options DIRECTED_BROADCAST # Broadcast across subnets 68 1.27 is 69 1.9 is #options MROUTING # Multicast routing 70 1.61.2.2 skrll #options PIM # Protocol Independent Multicast 71 1.9 is options NS # XNS 72 1.9 is #options NSIP # XNS tunneling over IP 73 1.9 is options ISO,TPIP # OSI 74 1.29 sommerfe #options EON # OSI tunneling over IP 75 1.9 is options CCITT,LLC,HDLC # X.25 76 1.9 is options NETATALK # AppleTalk networking protocols 77 1.37 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 1.27 is 79 1.9 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 80 1.9 is options PPP_DEFLATE # Deflate compression support for PPP 81 1.9 is options PPP_FILTER # Active filter support for PPP (requires bpf) 82 1.9 is options PFIL_HOOKS # pfil(9) packet filter hooks 83 1.9 is options IPFILTER_LOG # ipmon(8) log support 84 1.56 provos #options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 1.9 is 86 1.61.2.1 skrll #options ALTQ # Manipulate network interfaces' output queues 87 1.61.2.1 skrll #options ALTQ_BLUE # Stochastic Fair Blue 88 1.61.2.1 skrll #options ALTQ_CBQ # Class-Based Queueing 89 1.61.2.1 skrll #options ALTQ_CDNR # Diffserv Traffic Conditioner 90 1.61.2.1 skrll #options ALTQ_FIFOQ # First-In First-Out Queue 91 1.61.2.1 skrll #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 92 1.61.2.1 skrll #options ALTQ_HFSC # Hierarchical Fair Service Curve 93 1.61.2.1 skrll #options ALTQ_LOCALQ # Local queueing discipline 94 1.61.2.1 skrll #options ALTQ_PRIQ # Priority Queueing 95 1.61.2.1 skrll #options ALTQ_RED # Random Early Detection 96 1.61.2.1 skrll #options ALTQ_RIO # RED with IN/OUT 97 1.61.2.1 skrll #options ALTQ_WFQ # Weighted Fair Queueing 98 1.61.2.1 skrll 99 1.53 lukem # Filesystems 100 1.9 is file-system FFS # Berkeley fast file system 101 1.15 tron file-system EXT2FS # second extended file system (linux) 102 1.9 is #file-system LFS # log-structured filesystem (experimental) 103 1.27 is 104 1.9 is file-system MFS # Memory based filesystem 105 1.27 is 106 1.9 is file-system NFS # Network File System client side code 107 1.9 is file-system ADOSFS # AmigaDOS file system 108 1.9 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 109 1.9 is file-system MSDOSFS # MS-DOS filesystem 110 1.27 is 111 1.27 is file-system KERNFS # kernel data-structure filesystem 112 1.27 is 113 1.9 is file-system FDESC # user file descriptor filesystem 114 1.9 is file-system NULLFS # loopback filesystem 115 1.23 is file-system OVERLAY # overlay filesystem 116 1.9 is #file-system PORTAL # Portal filesystem 117 1.9 is file-system PROCFS # /proc filesystem 118 1.9 is file-system UMAPFS # NULLFS + uid and gid remapping 119 1.9 is file-system UNION # union filesystem 120 1.9 is 121 1.53 lukem # Filesystem options 122 1.27 is 123 1.27 is #options FFS_EI # FFS Endian Independant support 124 1.27 is 125 1.9 is options QUOTA # User and group quotas in FFS 126 1.39 lukem options SOFTDEP # FFS soft updates support. 127 1.15 tron options NFSSERVER # Network File System server side code 128 1.27 is 129 1.15 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 130 1.15 tron # immutable) behave as system flags. 131 1.9 is 132 1.53 lukem # 133 1.53 lukem # Compatibility options for various existing systems 134 1.53 lukem # 135 1.9 is 136 1.37 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 137 1.9 is options COMPAT_43 # compatibility with 4.3BSD interfaces 138 1.9 is options COMPAT_09 # compatibility with NetBSD 0.9 139 1.9 is options COMPAT_10 # compatibility with NetBSD 1.0 140 1.9 is options COMPAT_12 # compatibility with NetBSD 1.2 141 1.9 is options COMPAT_13 # compatibility with NetBSD 1.3 142 1.21 augustss options COMPAT_14 # compatibility with NetBSD 1.4 143 1.61.2.1 skrll options COMPAT_15 # compatibility with NetBSD 1.5 144 1.61.2.1 skrll options COMPAT_16 # compatibility with NetBSD 1.6 145 1.10 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 146 1.15 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 147 1.9 is options COMPAT_NOMID # allow nonvalid machine id executables 148 1.10 is #options COMPAT_LINUX # Support to run Linux/m68k executables 149 1.45 is 150 1.45 is options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 151 1.46 is options COMPAT_AOUT_M68K # actually make some system calls work. 152 1.9 is 153 1.53 lukem # 154 1.53 lukem # Support for System V IPC facilities. 155 1.53 lukem # 156 1.9 is options SYSVSHM # System V-like shared memory 157 1.9 is options SYSVMSG # System V-like messages 158 1.9 is options SYSVSEM # System V-like semaphores 159 1.39 lukem #options SEMMNI=10 # number of semaphore identifiers 160 1.39 lukem #options SEMMNS=60 # number of semaphores in system 161 1.39 lukem #options SEMUME=10 # max number of undo entries per process 162 1.39 lukem #options SEMMNU=30 # number of undo structures in system 163 1.61.2.1 skrll options P1003_1B_SEMAPHORE # p1003.1b semaphore support 164 1.9 is 165 1.53 lukem # 166 1.53 lukem # Support for various kernel options 167 1.53 lukem # 168 1.9 is 169 1.9 is options KTRACE # system call tracing support 170 1.56 provos options SYSTRACE # system call vetting via systrace(1) 171 1.9 is options LKM # Loadable kernel modules 172 1.42 jdolecek #options INSECURE # disable kernel security levels 173 1.42 jdolecek options SCSIVERBOSE # human readable SCSI error messages 174 1.55 lukem options USERCONF # userconf(4) support 175 1.9 is options NTP # NTP phase/frequency locked loop 176 1.53 lukem #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 177 1.58 wiz 178 1.58 wiz # Enable experimental buffer queue strategy for better responsiveness under 179 1.58 wiz # high disk I/O load. Use it with caution - it's not proven to be stable yet. 180 1.58 wiz #options NEW_BUFQ_STRATEGY 181 1.9 is 182 1.53 lukem # 183 1.53 lukem # Misc. debugging options 184 1.53 lukem # 185 1.9 is options DDB # Kernel debugger 186 1.9 is #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 187 1.9 is options DIAGNOSTIC # Extra kernel sanity checks 188 1.9 is #options DEBUG # Enable misc. kernel debugging code 189 1.9 is #options SYSCALL_DEBUG # debug all syscalls. 190 1.9 is #options SCSIDEBUG # Add SCSI debugging statements 191 1.51 thorpej #options PANICBUTTON # Forced crash via keypress (?) 192 1.9 is 193 1.53 lukem # 194 1.53 lukem # Amiga specific options 195 1.53 lukem # 196 1.10 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 197 1.12 is # first bank of RAM. (default: unlimited) 198 1.39 lukem #options NKPTADD=4 # set this for 4 additional KPT pages 199 1.39 lukem #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 200 1.12 is # per 16 MB (1<<24 bytes) of RAM 201 1.42 jdolecek # uncomment and decrease this, or uncomment and 202 1.39 lukem # increase NKPTADD if you get "out of PT pages" 203 1.39 lukem # panics. 204 1.12 is 205 1.53 lukem # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 206 1.53 lukem # before the 10 secondinterval ends, or that KBDRESET does work at all. 207 1.9 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 208 1.9 is 209 1.53 lukem # These options improve performance with the built-in serial port 210 1.53 lukem # on slower Amigas. Try the larger buffers first then lev6_defer. 211 1.9 is #options SERIBUF_SIZE=4096 212 1.9 is #options SEROBUF_SIZE=32 213 1.9 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 214 1.61 is 215 1.61 is #options DEVRELOAD # implement /dev/reload 216 1.61 is # # currently only works for a.out kernels 217 1.9 is 218 1.9 is options RETINACONSOLE # enable code to allow retina to be console 219 1.9 is options ULOWELLCONSOLE # enable code to allow a2410 to be console 220 1.9 is options CL5426CONSOLE # Cirrus console 221 1.9 is options CV64CONSOLE # CyberVision console 222 1.9 is options TSENGCONSOLE # Tseng console 223 1.9 is options CV3DCONSOLE # CyberVision 64/3D console 224 1.9 is 225 1.9 is options GRF_ECS # Enhanced Chip Set 226 1.9 is options GRF_NTSC # NTSC 227 1.9 is options GRF_PAL # PAL 228 1.9 is options GRF_A2024 # Support for the A2024 229 1.9 is options GRF_AGA # AGA Chip Set 230 1.12 is options GRF_AGA_VGA # AGA VGAONLY timing 231 1.9 is options GRF_SUPER72 # AGA Super-72 232 1.9 is #options KFONT_8X11 # 8x11 font 233 1.9 is 234 1.53 lukem # select a font for the console according to the character set and keymap 235 1.53 lukem # you want to use 236 1.49 heinz options KFONT_CONS_ISO8859_1 237 1.49 heinz #options KFONT_CONS_ISO8859_2 238 1.49 heinz 239 1.53 lukem # This is how you would tell the kernel the A2410 oscillator frequencies: 240 1.53 lukem # The used frequencies are the defaults, and do not need option setting 241 1.9 is #options ULOWELL_OSC1=36000000 242 1.9 is #options ULOWELL_OSC2=66667000 243 1.9 is 244 1.53 lukem # This is how you specify the blitting speed, higher values may speed up blits 245 1.53 lukem # a littel bit. If you raise this value too much some trash may appear. 246 1.53 lukem # the commented version is the default. 247 1.9 is #options RH_MEMCLK=61000000 248 1.53 lukem # this option enables the 64 bit sprite which does not work 249 1.53 lukem # for quite a few people. E.g. The cursor sprite will turn to a block 250 1.53 lukem # when moved to the top of the screen in X. 251 1.9 is #options RH_64BIT_SPRITE 252 1.53 lukem # enables fast scroll code appears to now work on 040 systems. 253 1.9 is #options RETINA_SPEED_HACK 254 1.53 lukem # enables the Hardwarecursor which does not work on some systems. 255 1.9 is #options RH_HARDWARECURSOR 256 1.9 is 257 1.53 lukem # wscons aware interface to amiga custom chips. 258 1.53 lukem # If you enable it enable also wskbd. 259 1.53 lukem # 260 1.35 is 261 1.35 is #amidisplaycc0 at mainbus0 # wscons interface to custom chips 262 1.35 is #wsdisplay0 at amidisplaycc0 console ? 263 1.53 lukem #options WSEMUL_VT100 264 1.53 lukem #options FONT_VT220L8x10 265 1.61.2.1 skrll #options FONT_VT220ISO8x16 266 1.35 is 267 1.9 is grfcc0 at mainbus0 # custom chips 268 1.9 is grfrt0 at zbus0 # retina II 269 1.9 is grfrh0 at zbus0 # retina III 270 1.49 heinz grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 271 1.9 is grful0 at zbus0 # A2410 272 1.9 is grfcv0 at zbus0 # CyberVision 64 273 1.9 is grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 274 1.9 is grfcv3d0 at zbus0 # CyberVision 64/3D 275 1.9 is 276 1.9 is grf0 at grfcc0 277 1.9 is grf1 at grfrt0 278 1.9 is grf2 at grfrh0 279 1.9 is grf3 at grfcl? 280 1.9 is grf4 at grful0 281 1.9 is grf5 at grfcv0 282 1.9 is grf6 at grfet? 283 1.9 is grf7 at grfcv3d0 284 1.10 is ite0 at grf0 # terminal emulators for grfs 285 1.10 is ite1 at grf1 # terminal emulators for grfs 286 1.10 is ite2 at grf2 # terminal emulators for grfs 287 1.10 is ite3 at grf3 # terminal emulators for grfs 288 1.10 is ite4 at grf4 # terminal emulators for grfs 289 1.10 is ite5 at grf5 # terminal emulators for grfs 290 1.10 is ite6 at grf6 # terminal emulators for grfs 291 1.10 is ite7 at grf7 # terminal emulators for grfs 292 1.9 is 293 1.9 is msc0 at zbus0 # A2232 MSC multiport serial. 294 1.9 is mfc0 at zbus0 # MultiFaceCard I/O board 295 1.9 is mfcs0 at mfc0 unit 0 # MFC serial 296 1.9 is mfcs1 at mfc0 unit 1 # MFC serial 297 1.9 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 298 1.9 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 299 1.9 is #mfcs2 at mfc1 unit 0 300 1.9 is #mfcs3 at mfc1 unit 1 301 1.9 is #mfcp1 at mfc1 unit 0 302 1.9 is 303 1.16 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 304 1.9 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 305 1.9 is com* at hyper? port ? # Hypercom3/4 serial ports 306 1.16 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 307 1.9 is 308 1.39 lukem #options IOBZCLOCK=22118400 # default, uncomment the next line 309 1.39 lukem #options IOBZCLOCK=24000000 # if needed. 310 1.35 is 311 1.35 is iobl* at zbus? # zbus IOBlix 312 1.35 is com* at iobl? port ? # IOBlix serial ports 313 1.35 is lpt* at iobl? port ? # IOBlix parallel ports 314 1.35 is 315 1.53 lukem 316 1.53 lukem # 317 1.53 lukem # Keyboard device. Optionally can attach a wskbd. 318 1.53 lukem # wskbd works together with a wsdisplay so enable them both if you will. 319 1.53 lukem # Don't enable wskbd if you use ite. 320 1.50 atatat # 321 1.53 lukem # XXX in std.amiga: kbd0 at mainbus0 322 1.53 lukem 323 1.35 is #wskbd0 at kbd0 console ? 324 1.27 is 325 1.53 lukem 326 1.53 lukem # 327 1.53 lukem # Amiga Mainboard devices (sans graphics and keyboard) 328 1.53 lukem # 329 1.9 is 330 1.9 is ser0 at mainbus0 # Amiga onboard serial 331 1.9 is par0 at mainbus0 # Amiga onboard parallel 332 1.9 is ms* at mainbus0 # Amiga mice 333 1.9 is fdc0 at mainbus0 # Amiga FDC 334 1.9 is fd* at fdc0 unit ? # floppy disks on the later 335 1.9 is a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 336 1.9 is a2kbbc0 at mainbus0 # A2000 battery backed clock 337 1.9 is aucc* at mainbus0 # Amiga CC audio 338 1.9 is audio* at aucc? 339 1.9 is 340 1.9 is 341 1.61.2.1 skrll #wsmouse* at ms? 342 1.61.2.1 skrll 343 1.61.2.1 skrll 344 1.53 lukem # 345 1.53 lukem # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 346 1.53 lukem # 347 1.53 lukem 348 1.53 lukem # Alas, Melody-Z2 dont configure in the DraCo bus. 349 1.9 is melody* at zbus0 # Melody MPEG audio decoder 350 1.9 is audio* at melody? 351 1.38 is 352 1.38 is repulse* at zbus0 # ALiENDESiGN Repulse 353 1.38 is audio* at repulse? 354 1.43 is 355 1.43 is toccata* at zbus0 # MacroSystem GmbH Toccata 356 1.43 is audio* at toccata? 357 1.9 is 358 1.53 lukem # Ethernet cards: 359 1.9 is le* at zbus0 # A2065, Ameristar, Ariadne 360 1.33 is ne* at zbus0 # AriadneII, X-surf 361 1.17 is ed* at zbus0 # Hydra, ASDG LanRover 362 1.17 is es* at zbus0 # CEI A4066 EthernetPLUS 363 1.17 is qn* at zbus0 # Quicknet 364 1.9 is 365 1.53 lukem # Arcnet 366 1.9 is bah* at zbus0 # C=/Ameristar A2060 / 560 367 1.9 is 368 1.53 lukem # Greater Valley Product Bus 369 1.9 is gvpbus* at zbus0 370 1.9 is 371 1.53 lukem # scsi stuff, all possible 372 1.9 is gtsc0 at gvpbus? # GVP series II scsi 373 1.9 is scsibus* at gtsc0 374 1.9 is ahsc0 at mainbus0 # A3000 scsi 375 1.9 is scsibus* at ahsc0 376 1.9 is atzsc0 at zbus0 # A2091 scsi 377 1.9 is scsibus* at atzsc0 378 1.9 is wstsc0 at zbus0 # Wordsync II scsi 379 1.9 is scsibus* at wstsc0 380 1.9 is ivsc0 at zbus0 # IVS scsi 381 1.9 is scsibus* at ivsc0 382 1.9 is mlhsc0 at zbus0 # Hacker scsi 383 1.9 is scsibus* at mlhsc0 384 1.9 is otgsc0 at zbus0 # 12 gauge scsi 385 1.9 is scsibus* at otgsc0 386 1.9 is zssc0 at zbus0 # Zeus scsi 387 1.9 is scsibus* at zssc0 388 1.9 is mgnsc0 at zbus0 # Magnum scsi 389 1.9 is scsibus* at mgnsc0 390 1.9 is wesc0 at zbus0 # Warp Engine scsi 391 1.9 is scsibus* at wesc0 392 1.9 is afsc0 at zbus0 # A4091 scsi 393 1.9 is scsibus* at afsc0 394 1.9 is aftsc0 at mainbus0 # A4000T scsi 395 1.9 is scsibus* at aftsc0 396 1.9 is flsc0 at zbus0 # FastlaneZ3 scsi 397 1.9 is scsibus* at flsc0 398 1.39 lukem bzsc0 at zbus0 # Blizzard 1230 I,II scsi 399 1.9 is scsibus* at bzsc0 400 1.39 lukem bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 401 1.9 is scsibus* at bzivsc0 402 1.9 is bztzsc0 at zbus0 # Blizzard 2060 scsi 403 1.9 is scsibus* at bztzsc0 404 1.9 is cbsc0 at zbus0 # CyberSCSI I 405 1.9 is scsibus* at cbsc0 406 1.9 is cbiisc0 at zbus0 # CyberSCSI II 407 1.9 is scsibus* at cbiisc0 408 1.10 is cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 409 1.10 is scsibus* at cbiiisc0 410 1.9 is empsc0 at zbus0 # Emplant scsi 411 1.9 is scsibus* at empsc0 412 1.34 is #idesc0 at mainbus0 # A4000 & A1200 IDE 413 1.34 is #scsibus* at idesc0 414 1.25 mhitch 415 1.53 lukem # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 416 1.53 lukem # <<< are uncommented >>> 417 1.34 is wdc0 at mainbus0 # A4000 & A1200 IDE bus 418 1.61.2.1 skrll atabus* at wdc? channel ? # ATA bus 419 1.61.2.1 skrll wd* at atabus? drive ? # + drives 420 1.61.2.1 skrll atapibus* at atabus? # ATAPI bus 421 1.34 is cd* at atapibus? drive ? # ATAPI CD-ROM drives 422 1.34 is sd* at atapibus? drive ? # ATAPI disk drives 423 1.34 is 424 1.34 is pccard0 at mainbus0 425 1.34 is pcmcia* at pccard0 426 1.34 is com* at pcmcia? function ? # Modems and serial cards 427 1.34 is pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 428 1.34 is aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 429 1.34 is wdc* at pcmcia? function ? 430 1.34 is awi* at pcmcia? function ? # BayStack 650 (802.11FH) 431 1.34 is ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 432 1.34 is mbe* at pcmcia? function ? # MB8696x based Ethernet 433 1.34 is ne* at pcmcia? function ? # NE2000-compatible Ethernet 434 1.34 is sm* at pcmcia? function ? # Megahertz Ethernet 435 1.39 lukem mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 436 1.34 is com* at mhzc? 437 1.34 is sm* at mhzc? 438 1.9 is 439 1.53 lukem 440 1.53 lukem 441 1.53 lukem 442 1.53 lukem # each hard drive from low target to high 443 1.53 lukem # will configure to the next available sd unit number 444 1.9 is sd* at scsibus? target ? lun ? # scsi disks 445 1.9 is st* at scsibus? target ? lun ? # scsi tapes 446 1.10 is cd* at scsibus? target ? lun ? # scsi cds 447 1.29 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 448 1.9 is ss* at scsibus? target ? lun ? # scsi scanner 449 1.9 is uk* at scsibus? target ? lun ? # scsi unknown 450 1.9 is 451 1.9 is pseudo-device loop # loopback network interface 452 1.9 is pseudo-device sl 1 # SLIP network interfaces 453 1.9 is pseudo-device ppp 1 # PPP network interfaces 454 1.40 jandberg pseudo-device pppoe # PPP over Ethernet (RFC 2516) 455 1.9 is pseudo-device tun 1 # network tunnel line discipline 456 1.9 is #pseudo-device gre 2 # generic L3 over IP tunnel 457 1.9 is pseudo-device bpfilter 16 # Berkeley packet filter 458 1.9 is pseudo-device ipfilter # IP Filter package 459 1.23 is pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 460 1.23 is #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 461 1.29 sommerfe #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 462 1.33 is pseudo-device vlan # IEEE 802.1q encapsulation 463 1.40 jandberg pseudo-device bridge # simple inter-network bridging 464 1.59 perseant #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 465 1.61.2.1 skrll #pseudo-device pf # PF packet filter 466 1.61.2.1 skrll #pseudo-device pflog # PF log if 467 1.9 is 468 1.19 is pseudo-device view 4 # views (needed for grfcc) 469 1.31 jdolecek pseudo-device pty # pseudo-terminals 470 1.52 lukem pseudo-device clockctl # user control of clock subsystem 471 1.9 is 472 1.61.2.1 skrll #pseudo-device wsfont # wsfont(4) dynamic font loading support 473 1.61.2.1 skrll 474 1.9 is pseudo-device vnd 4 # vnode pseudo-disks 475 1.9 is pseudo-device ccd 4 # concatenated disk devices 476 1.57 elric #pseudo-device cgd 4 # cryptographic disk devices 477 1.42 jdolecek pseudo-device raid 8 # RAIDframe disk driver 478 1.42 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 479 1.53 lukem # Options to enable various other RAIDframe RAID types. 480 1.53 lukem # options RF_INCLUDE_EVENODD=1 481 1.53 lukem # options RF_INCLUDE_RAID5_RS=1 482 1.53 lukem # options RF_INCLUDE_PARITYLOGGING=1 483 1.53 lukem # options RF_INCLUDE_CHAINDECLUSTER=1 484 1.53 lukem # options RF_INCLUDE_INTERDECLUSTER=1 485 1.53 lukem # options RF_INCLUDE_PARITY_DECLUSTERING=1 486 1.53 lukem # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 487 1.9 is 488 1.39 lukem pseudo-device rnd # /dev/random and in-kernel generator 489 1.39 lukem #options RND_COM # use "com" randomness as well (BROKEN) 490 1.9 is 491 1.61.2.1 skrll pseudo-device ksyms # /dev/ksyms (kernel symbols) 492 1.61.2.1 skrll 493 1.9 is config netbsd root on ? type ? 494
Indexes created Fri Oct 31 11:10:07 GMT 2025