AMIGA revision 1.66.2.1
1 1.66.2.1 jdc # $NetBSD: AMIGA,v 1.66.2.1 2004/06/30 21:30:09 jdc Exp $ 2 1.9 is # 3 1.53 lukem # This file was automatically created. 4 1.53 lukem # Changes will be lost when make is run in this directory. 5 1.9 is # 6 1.66.2.1 jdc # Created from: # NetBSD: GENERIC.in,v 1.22 2004/06/26 07:32:05 abs Exp $ 7 1.53 lukem # 8 1.53 lukem # GENERIC machine description file 9 1.53 lukem # 10 1.53 lukem # This machine description file is used to generate the default NetBSD 11 1.53 lukem # kernel. The generic kernel does not include all options, subsystems 12 1.53 lukem # and device drivers, but should be useful for most applications. 13 1.53 lukem # 14 1.53 lukem # The machine description file can be customised for your specific 15 1.53 lukem # machine to reduce the kernel size and improve its performance. 16 1.53 lukem # 17 1.53 lukem # For further information on compiling NetBSD kernels, see the config(8) 18 1.53 lukem # man page. 19 1.53 lukem # 20 1.53 lukem # For further information on hardware support for this architecture, see 21 1.53 lukem # the intro(4) man page. For further information about kernel options 22 1.53 lukem # for this architecture, see the options(4) man page. For an explanation 23 1.53 lukem # of each device driver in this file see the section 4 man page for the 24 1.53 lukem # device. 25 1.40 jandberg 26 1.40 jandberg 27 1.9 is include "arch/amiga/conf/std.amiga" 28 1.9 is 29 1.50 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 1.50 atatat 31 1.66.2.1 jdc #ident "GENERIC-$Revision: 1.66.2.1 $" 32 1.53 lukem 33 1.25 mhitch 34 1.9 is maxusers 8 35 1.9 is options RTC_OFFSET=0 36 1.9 is 37 1.53 lukem # 38 1.53 lukem # mainboards to support (in addition to Amiga) 39 1.53 lukem # 40 1.9 is options BB060STUPIDROM # You need this, if you have a non-DraCo 41 1.39 lukem # MC68060 with an OS ROM up to (at least) 42 1.12 is # V40 (OS3.1) and want to boot with the 43 1.12 is # bootblock. 44 1.12 is # You do not need this if you have a DraCo, 45 1.12 is # have no 68060 or NEVER use the bootblock 46 1.39 lukem options P5PPC68KBOARD # Phase5 PPC/68K board support 47 1.53 lukem # 48 1.53 lukem # processors this kernel should support 49 1.53 lukem # 50 1.9 is options M68060 # support for 060 51 1.9 is options M060SP # MC68060 software support (Required for 060) 52 1.9 is options M68040 # support for 040 53 1.9 is options FPSP # MC68040 floating point support 54 1.9 is options M68030 # support for 030 55 1.9 is options M68020 # support for 020/851 56 1.9 is options FPU_EMULATE # FPU emulation 57 1.9 is 58 1.53 lukem # 59 1.53 lukem # Networking options 60 1.53 lukem # 61 1.9 is options INET # IP networking support (Required) 62 1.23 is options INET6 # IPV6 63 1.23 is #options IPSEC # IP security 64 1.23 is #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65 1.23 is #options IPSEC_DEBUG # debug for IP security 66 1.9 is #options GATEWAY # Packet forwarding 67 1.9 is #options DIRECTED_BROADCAST # Broadcast across subnets 68 1.27 is 69 1.9 is #options MROUTING # Multicast routing 70 1.9 is options NS # XNS 71 1.9 is #options NSIP # XNS tunneling over IP 72 1.9 is options ISO,TPIP # OSI 73 1.29 sommerfe #options EON # OSI tunneling over IP 74 1.9 is options CCITT,LLC,HDLC # X.25 75 1.9 is options NETATALK # AppleTalk networking protocols 76 1.37 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 1.27 is 78 1.9 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 79 1.9 is options PPP_DEFLATE # Deflate compression support for PPP 80 1.9 is options PPP_FILTER # Active filter support for PPP (requires bpf) 81 1.9 is options PFIL_HOOKS # pfil(9) packet filter hooks 82 1.9 is options IPFILTER_LOG # ipmon(8) log support 83 1.56 provos #options IPFILTER_DEFAULT_BLOCK # block all packets by default 84 1.9 is 85 1.66.2.1 jdc #options ALTQ # Manipulate network interfaces' output queues 86 1.66.2.1 jdc #options ALTQ_BLUE # Stochastic Fair Blue 87 1.66.2.1 jdc #options ALTQ_CBQ # Class-Based Queueing 88 1.66.2.1 jdc #options ALTQ_CDNR # Diffserv Traffic Conditioner 89 1.66.2.1 jdc #options ALTQ_FIFOQ # First-In First-Out Queue 90 1.66.2.1 jdc #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 91 1.66.2.1 jdc #options ALTQ_HFSC # Hierarchical Fair Service Curve 92 1.66.2.1 jdc #options ALTQ_LOCALQ # Local queueing discipline 93 1.66.2.1 jdc #options ALTQ_PRIQ # Priority Queueing 94 1.66.2.1 jdc #options ALTQ_RED # Random Early Detection 95 1.66.2.1 jdc #options ALTQ_RIO # RED with IN/OUT 96 1.66.2.1 jdc #options ALTQ_WFQ # Weighted Fair Queueing 97 1.66.2.1 jdc 98 1.53 lukem # Filesystems 99 1.9 is file-system FFS # Berkeley fast file system 100 1.15 tron file-system EXT2FS # second extended file system (linux) 101 1.9 is #file-system LFS # log-structured filesystem (experimental) 102 1.27 is 103 1.9 is file-system MFS # Memory based filesystem 104 1.27 is 105 1.9 is file-system NFS # Network File System client side code 106 1.9 is file-system ADOSFS # AmigaDOS file system 107 1.9 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 108 1.9 is file-system MSDOSFS # MS-DOS filesystem 109 1.27 is 110 1.27 is file-system KERNFS # kernel data-structure filesystem 111 1.27 is 112 1.9 is file-system FDESC # user file descriptor filesystem 113 1.9 is file-system NULLFS # loopback filesystem 114 1.23 is file-system OVERLAY # overlay filesystem 115 1.9 is #file-system PORTAL # Portal filesystem 116 1.9 is file-system PROCFS # /proc filesystem 117 1.9 is file-system UMAPFS # NULLFS + uid and gid remapping 118 1.9 is file-system UNION # union filesystem 119 1.9 is 120 1.53 lukem # Filesystem options 121 1.27 is 122 1.27 is #options FFS_EI # FFS Endian Independant support 123 1.27 is 124 1.9 is options QUOTA # User and group quotas in FFS 125 1.39 lukem options SOFTDEP # FFS soft updates support. 126 1.15 tron options NFSSERVER # Network File System server side code 127 1.27 is 128 1.15 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 129 1.15 tron # immutable) behave as system flags. 130 1.9 is 131 1.53 lukem # 132 1.53 lukem # Compatibility options for various existing systems 133 1.53 lukem # 134 1.9 is 135 1.37 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 136 1.9 is options COMPAT_43 # compatibility with 4.3BSD interfaces 137 1.9 is options COMPAT_09 # compatibility with NetBSD 0.9 138 1.9 is options COMPAT_10 # compatibility with NetBSD 1.0 139 1.9 is options COMPAT_12 # compatibility with NetBSD 1.2 140 1.9 is options COMPAT_13 # compatibility with NetBSD 1.3 141 1.21 augustss options COMPAT_14 # compatibility with NetBSD 1.4 142 1.63 cl options COMPAT_15 # compatibility with NetBSD 1.5 143 1.63 cl options COMPAT_16 # compatibility with NetBSD 1.6 144 1.10 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 145 1.15 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 146 1.9 is options COMPAT_NOMID # allow nonvalid machine id executables 147 1.10 is #options COMPAT_LINUX # Support to run Linux/m68k executables 148 1.45 is 149 1.45 is options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 150 1.46 is options COMPAT_AOUT_M68K # actually make some system calls work. 151 1.9 is 152 1.53 lukem # 153 1.53 lukem # Support for System V IPC facilities. 154 1.53 lukem # 155 1.9 is options SYSVSHM # System V-like shared memory 156 1.9 is options SYSVMSG # System V-like messages 157 1.9 is options SYSVSEM # System V-like semaphores 158 1.39 lukem #options SEMMNI=10 # number of semaphore identifiers 159 1.39 lukem #options SEMMNS=60 # number of semaphores in system 160 1.39 lukem #options SEMUME=10 # max number of undo entries per process 161 1.39 lukem #options SEMMNU=30 # number of undo structures in system 162 1.9 is 163 1.53 lukem # 164 1.53 lukem # Support for various kernel options 165 1.53 lukem # 166 1.9 is 167 1.9 is options KTRACE # system call tracing support 168 1.56 provos options SYSTRACE # system call vetting via systrace(1) 169 1.9 is options LKM # Loadable kernel modules 170 1.42 jdolecek #options INSECURE # disable kernel security levels 171 1.42 jdolecek options SCSIVERBOSE # human readable SCSI error messages 172 1.55 lukem options USERCONF # userconf(4) support 173 1.9 is options NTP # NTP phase/frequency locked loop 174 1.53 lukem #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 175 1.58 wiz 176 1.58 wiz # Enable experimental buffer queue strategy for better responsiveness under 177 1.58 wiz # high disk I/O load. Use it with caution - it's not proven to be stable yet. 178 1.58 wiz #options NEW_BUFQ_STRATEGY 179 1.9 is 180 1.53 lukem # 181 1.53 lukem # Misc. debugging options 182 1.53 lukem # 183 1.9 is options DDB # Kernel debugger 184 1.9 is #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 185 1.9 is options DIAGNOSTIC # Extra kernel sanity checks 186 1.9 is #options DEBUG # Enable misc. kernel debugging code 187 1.9 is #options SYSCALL_DEBUG # debug all syscalls. 188 1.9 is #options SCSIDEBUG # Add SCSI debugging statements 189 1.51 thorpej #options PANICBUTTON # Forced crash via keypress (?) 190 1.9 is 191 1.53 lukem # 192 1.53 lukem # Amiga specific options 193 1.53 lukem # 194 1.10 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 195 1.12 is # first bank of RAM. (default: unlimited) 196 1.39 lukem #options NKPTADD=4 # set this for 4 additional KPT pages 197 1.39 lukem #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 198 1.12 is # per 16 MB (1<<24 bytes) of RAM 199 1.42 jdolecek # uncomment and decrease this, or uncomment and 200 1.39 lukem # increase NKPTADD if you get "out of PT pages" 201 1.39 lukem # panics. 202 1.12 is 203 1.53 lukem # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 204 1.53 lukem # before the 10 secondinterval ends, or that KBDRESET does work at all. 205 1.9 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 206 1.9 is 207 1.53 lukem # These options improve performance with the built-in serial port 208 1.53 lukem # on slower Amigas. Try the larger buffers first then lev6_defer. 209 1.9 is #options SERIBUF_SIZE=4096 210 1.9 is #options SEROBUF_SIZE=32 211 1.9 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 212 1.61 is 213 1.61 is #options DEVRELOAD # implement /dev/reload 214 1.61 is # # currently only works for a.out kernels 215 1.9 is 216 1.9 is options RETINACONSOLE # enable code to allow retina to be console 217 1.9 is options ULOWELLCONSOLE # enable code to allow a2410 to be console 218 1.9 is options CL5426CONSOLE # Cirrus console 219 1.9 is options CV64CONSOLE # CyberVision console 220 1.9 is options TSENGCONSOLE # Tseng console 221 1.9 is options CV3DCONSOLE # CyberVision 64/3D console 222 1.9 is 223 1.9 is options GRF_ECS # Enhanced Chip Set 224 1.9 is options GRF_NTSC # NTSC 225 1.9 is options GRF_PAL # PAL 226 1.9 is options GRF_A2024 # Support for the A2024 227 1.9 is options GRF_AGA # AGA Chip Set 228 1.12 is options GRF_AGA_VGA # AGA VGAONLY timing 229 1.9 is options GRF_SUPER72 # AGA Super-72 230 1.9 is #options KFONT_8X11 # 8x11 font 231 1.9 is 232 1.53 lukem # select a font for the console according to the character set and keymap 233 1.53 lukem # you want to use 234 1.49 heinz options KFONT_CONS_ISO8859_1 235 1.49 heinz #options KFONT_CONS_ISO8859_2 236 1.49 heinz 237 1.53 lukem # This is how you would tell the kernel the A2410 oscillator frequencies: 238 1.53 lukem # The used frequencies are the defaults, and do not need option setting 239 1.9 is #options ULOWELL_OSC1=36000000 240 1.9 is #options ULOWELL_OSC2=66667000 241 1.9 is 242 1.53 lukem # This is how you specify the blitting speed, higher values may speed up blits 243 1.53 lukem # a littel bit. If you raise this value too much some trash may appear. 244 1.53 lukem # the commented version is the default. 245 1.9 is #options RH_MEMCLK=61000000 246 1.53 lukem # this option enables the 64 bit sprite which does not work 247 1.53 lukem # for quite a few people. E.g. The cursor sprite will turn to a block 248 1.53 lukem # when moved to the top of the screen in X. 249 1.9 is #options RH_64BIT_SPRITE 250 1.53 lukem # enables fast scroll code appears to now work on 040 systems. 251 1.9 is #options RETINA_SPEED_HACK 252 1.53 lukem # enables the Hardwarecursor which does not work on some systems. 253 1.9 is #options RH_HARDWARECURSOR 254 1.9 is 255 1.53 lukem # wscons aware interface to amiga custom chips. 256 1.53 lukem # If you enable it enable also wskbd. 257 1.53 lukem # 258 1.35 is 259 1.35 is #amidisplaycc0 at mainbus0 # wscons interface to custom chips 260 1.35 is #wsdisplay0 at amidisplaycc0 console ? 261 1.53 lukem #options WSEMUL_VT100 262 1.53 lukem #options FONT_VT220L8x10 263 1.66 jandberg #options FONT_VT220ISO8x16 264 1.35 is 265 1.9 is grfcc0 at mainbus0 # custom chips 266 1.9 is grfrt0 at zbus0 # retina II 267 1.9 is grfrh0 at zbus0 # retina III 268 1.49 heinz grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 269 1.9 is grful0 at zbus0 # A2410 270 1.9 is grfcv0 at zbus0 # CyberVision 64 271 1.9 is grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 272 1.9 is grfcv3d0 at zbus0 # CyberVision 64/3D 273 1.9 is 274 1.9 is grf0 at grfcc0 275 1.9 is grf1 at grfrt0 276 1.9 is grf2 at grfrh0 277 1.9 is grf3 at grfcl? 278 1.9 is grf4 at grful0 279 1.9 is grf5 at grfcv0 280 1.9 is grf6 at grfet? 281 1.9 is grf7 at grfcv3d0 282 1.10 is ite0 at grf0 # terminal emulators for grfs 283 1.10 is ite1 at grf1 # terminal emulators for grfs 284 1.10 is ite2 at grf2 # terminal emulators for grfs 285 1.10 is ite3 at grf3 # terminal emulators for grfs 286 1.10 is ite4 at grf4 # terminal emulators for grfs 287 1.10 is ite5 at grf5 # terminal emulators for grfs 288 1.10 is ite6 at grf6 # terminal emulators for grfs 289 1.10 is ite7 at grf7 # terminal emulators for grfs 290 1.9 is 291 1.9 is msc0 at zbus0 # A2232 MSC multiport serial. 292 1.9 is mfc0 at zbus0 # MultiFaceCard I/O board 293 1.9 is mfcs0 at mfc0 unit 0 # MFC serial 294 1.9 is mfcs1 at mfc0 unit 1 # MFC serial 295 1.9 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 296 1.9 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 297 1.9 is #mfcs2 at mfc1 unit 0 298 1.9 is #mfcs3 at mfc1 unit 1 299 1.9 is #mfcp1 at mfc1 unit 0 300 1.9 is 301 1.16 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 302 1.9 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 303 1.9 is com* at hyper? port ? # Hypercom3/4 serial ports 304 1.16 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 305 1.9 is 306 1.39 lukem #options IOBZCLOCK=22118400 # default, uncomment the next line 307 1.39 lukem #options IOBZCLOCK=24000000 # if needed. 308 1.35 is 309 1.35 is iobl* at zbus? # zbus IOBlix 310 1.35 is com* at iobl? port ? # IOBlix serial ports 311 1.35 is lpt* at iobl? port ? # IOBlix parallel ports 312 1.35 is 313 1.53 lukem 314 1.53 lukem # 315 1.53 lukem # Keyboard device. Optionally can attach a wskbd. 316 1.53 lukem # wskbd works together with a wsdisplay so enable them both if you will. 317 1.53 lukem # Don't enable wskbd if you use ite. 318 1.50 atatat # 319 1.53 lukem # XXX in std.amiga: kbd0 at mainbus0 320 1.53 lukem 321 1.35 is #wskbd0 at kbd0 console ? 322 1.27 is 323 1.53 lukem 324 1.53 lukem # 325 1.53 lukem # Amiga Mainboard devices (sans graphics and keyboard) 326 1.53 lukem # 327 1.9 is 328 1.9 is ser0 at mainbus0 # Amiga onboard serial 329 1.9 is par0 at mainbus0 # Amiga onboard parallel 330 1.9 is ms* at mainbus0 # Amiga mice 331 1.9 is fdc0 at mainbus0 # Amiga FDC 332 1.9 is fd* at fdc0 unit ? # floppy disks on the later 333 1.9 is a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 334 1.9 is a2kbbc0 at mainbus0 # A2000 battery backed clock 335 1.9 is aucc* at mainbus0 # Amiga CC audio 336 1.9 is audio* at aucc? 337 1.64 jandberg 338 1.64 jandberg 339 1.64 jandberg #wsmouse* at ms? 340 1.9 is 341 1.9 is 342 1.53 lukem # 343 1.53 lukem # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 344 1.53 lukem # 345 1.53 lukem 346 1.53 lukem # Alas, Melody-Z2 dont configure in the DraCo bus. 347 1.9 is melody* at zbus0 # Melody MPEG audio decoder 348 1.9 is audio* at melody? 349 1.38 is 350 1.38 is repulse* at zbus0 # ALiENDESiGN Repulse 351 1.38 is audio* at repulse? 352 1.43 is 353 1.43 is toccata* at zbus0 # MacroSystem GmbH Toccata 354 1.43 is audio* at toccata? 355 1.9 is 356 1.53 lukem # Ethernet cards: 357 1.9 is le* at zbus0 # A2065, Ameristar, Ariadne 358 1.33 is ne* at zbus0 # AriadneII, X-surf 359 1.17 is ed* at zbus0 # Hydra, ASDG LanRover 360 1.17 is es* at zbus0 # CEI A4066 EthernetPLUS 361 1.17 is qn* at zbus0 # Quicknet 362 1.9 is 363 1.53 lukem # Arcnet 364 1.9 is bah* at zbus0 # C=/Ameristar A2060 / 560 365 1.9 is 366 1.53 lukem # Greater Valley Product Bus 367 1.9 is gvpbus* at zbus0 368 1.9 is 369 1.53 lukem # scsi stuff, all possible 370 1.9 is gtsc0 at gvpbus? # GVP series II scsi 371 1.9 is scsibus* at gtsc0 372 1.9 is ahsc0 at mainbus0 # A3000 scsi 373 1.9 is scsibus* at ahsc0 374 1.9 is atzsc0 at zbus0 # A2091 scsi 375 1.9 is scsibus* at atzsc0 376 1.9 is wstsc0 at zbus0 # Wordsync II scsi 377 1.9 is scsibus* at wstsc0 378 1.9 is ivsc0 at zbus0 # IVS scsi 379 1.9 is scsibus* at ivsc0 380 1.9 is mlhsc0 at zbus0 # Hacker scsi 381 1.9 is scsibus* at mlhsc0 382 1.9 is otgsc0 at zbus0 # 12 gauge scsi 383 1.9 is scsibus* at otgsc0 384 1.9 is zssc0 at zbus0 # Zeus scsi 385 1.9 is scsibus* at zssc0 386 1.9 is mgnsc0 at zbus0 # Magnum scsi 387 1.9 is scsibus* at mgnsc0 388 1.9 is wesc0 at zbus0 # Warp Engine scsi 389 1.9 is scsibus* at wesc0 390 1.9 is afsc0 at zbus0 # A4091 scsi 391 1.9 is scsibus* at afsc0 392 1.9 is aftsc0 at mainbus0 # A4000T scsi 393 1.9 is scsibus* at aftsc0 394 1.9 is flsc0 at zbus0 # FastlaneZ3 scsi 395 1.9 is scsibus* at flsc0 396 1.39 lukem bzsc0 at zbus0 # Blizzard 1230 I,II scsi 397 1.9 is scsibus* at bzsc0 398 1.39 lukem bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 399 1.9 is scsibus* at bzivsc0 400 1.9 is bztzsc0 at zbus0 # Blizzard 2060 scsi 401 1.9 is scsibus* at bztzsc0 402 1.9 is cbsc0 at zbus0 # CyberSCSI I 403 1.9 is scsibus* at cbsc0 404 1.9 is cbiisc0 at zbus0 # CyberSCSI II 405 1.9 is scsibus* at cbiisc0 406 1.10 is cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 407 1.10 is scsibus* at cbiiisc0 408 1.9 is empsc0 at zbus0 # Emplant scsi 409 1.9 is scsibus* at empsc0 410 1.34 is #idesc0 at mainbus0 # A4000 & A1200 IDE 411 1.34 is #scsibus* at idesc0 412 1.25 mhitch 413 1.53 lukem # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 414 1.53 lukem # <<< are uncommented >>> 415 1.34 is wdc0 at mainbus0 # A4000 & A1200 IDE bus 416 1.65 bouyer atabus* at wdc? channel ? # ATA bus 417 1.65 bouyer wd* at atabus? drive ? # + drives 418 1.65 bouyer atapibus* at atabus? # ATAPI bus 419 1.34 is cd* at atapibus? drive ? # ATAPI CD-ROM drives 420 1.34 is sd* at atapibus? drive ? # ATAPI disk drives 421 1.34 is 422 1.34 is pccard0 at mainbus0 423 1.34 is pcmcia* at pccard0 424 1.34 is com* at pcmcia? function ? # Modems and serial cards 425 1.34 is pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 426 1.34 is aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 427 1.34 is wdc* at pcmcia? function ? 428 1.34 is awi* at pcmcia? function ? # BayStack 650 (802.11FH) 429 1.34 is ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 430 1.34 is mbe* at pcmcia? function ? # MB8696x based Ethernet 431 1.34 is ne* at pcmcia? function ? # NE2000-compatible Ethernet 432 1.34 is sm* at pcmcia? function ? # Megahertz Ethernet 433 1.39 lukem mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 434 1.34 is com* at mhzc? 435 1.34 is sm* at mhzc? 436 1.9 is 437 1.53 lukem 438 1.53 lukem 439 1.53 lukem 440 1.53 lukem # each hard drive from low target to high 441 1.53 lukem # will configure to the next available sd unit number 442 1.9 is sd* at scsibus? target ? lun ? # scsi disks 443 1.9 is st* at scsibus? target ? lun ? # scsi tapes 444 1.10 is cd* at scsibus? target ? lun ? # scsi cds 445 1.29 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 446 1.9 is ss* at scsibus? target ? lun ? # scsi scanner 447 1.9 is uk* at scsibus? target ? lun ? # scsi unknown 448 1.9 is 449 1.9 is pseudo-device loop # loopback network interface 450 1.9 is pseudo-device sl 1 # SLIP network interfaces 451 1.9 is pseudo-device ppp 1 # PPP network interfaces 452 1.40 jandberg pseudo-device pppoe # PPP over Ethernet (RFC 2516) 453 1.9 is pseudo-device tun 1 # network tunnel line discipline 454 1.9 is #pseudo-device gre 2 # generic L3 over IP tunnel 455 1.9 is pseudo-device bpfilter 16 # Berkeley packet filter 456 1.9 is pseudo-device ipfilter # IP Filter package 457 1.23 is pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 458 1.23 is #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 459 1.29 sommerfe #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 460 1.33 is pseudo-device vlan # IEEE 802.1q encapsulation 461 1.40 jandberg pseudo-device bridge # simple inter-network bridging 462 1.59 perseant #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 463 1.66.2.1 jdc #pseudo-device pf # PF packet filter 464 1.66.2.1 jdc #pseudo-device pflog # PF log if 465 1.9 is 466 1.19 is pseudo-device view 4 # views (needed for grfcc) 467 1.31 jdolecek pseudo-device pty # pseudo-terminals 468 1.52 lukem pseudo-device clockctl # user control of clock subsystem 469 1.9 is 470 1.66 jandberg #pseudo-device wsfont # wsfont(4) dynamic font loading support 471 1.66 jandberg 472 1.9 is pseudo-device vnd 4 # vnode pseudo-disks 473 1.9 is pseudo-device ccd 4 # concatenated disk devices 474 1.57 elric #pseudo-device cgd 4 # cryptographic disk devices 475 1.42 jdolecek pseudo-device raid 8 # RAIDframe disk driver 476 1.42 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 477 1.53 lukem # Options to enable various other RAIDframe RAID types. 478 1.53 lukem # options RF_INCLUDE_EVENODD=1 479 1.53 lukem # options RF_INCLUDE_RAID5_RS=1 480 1.53 lukem # options RF_INCLUDE_PARITYLOGGING=1 481 1.53 lukem # options RF_INCLUDE_CHAINDECLUSTER=1 482 1.53 lukem # options RF_INCLUDE_INTERDECLUSTER=1 483 1.53 lukem # options RF_INCLUDE_PARITY_DECLUSTERING=1 484 1.53 lukem # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 485 1.9 is 486 1.39 lukem pseudo-device rnd # /dev/random and in-kernel generator 487 1.39 lukem #options RND_COM # use "com" randomness as well (BROKEN) 488 1.62 is 489 1.62 is pseudo-device ksyms # /dev/ksyms (kernel symbols) 490 1.9 is 491 1.9 is config netbsd root on ? type ? 492
Indexes created Fri Oct 31 11:10:07 GMT 2025