AMIGA revision 1.61.2.2
1 # $NetBSD: AMIGA,v 1.61.2.2 2004/09/18 14:31:33 skrll Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.23 2004/06/28 21:07:47 bouyer Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.61.2.2 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options BB060STUPIDROM # You need this, if you have a non-DraCo 41 # MC68060 with an OS ROM up to (at least) 42 # V40 (OS3.1) and want to boot with the 43 # bootblock. 44 # You do not need this if you have a DraCo, 45 # have no 68060 or NEVER use the bootblock 46 options P5PPC68KBOARD # Phase5 PPC/68K board support 47 # 48 # processors this kernel should support 49 # 50 options M68060 # support for 060 51 options M060SP # MC68060 software support (Required for 060) 52 options M68040 # support for 040 53 options FPSP # MC68040 floating point support 54 options M68030 # support for 030 55 options M68020 # support for 020/851 56 options FPU_EMULATE # FPU emulation 57 58 # 59 # Networking options 60 # 61 options INET # IP networking support (Required) 62 options INET6 # IPV6 63 #options IPSEC # IP security 64 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65 #options IPSEC_DEBUG # debug for IP security 66 #options GATEWAY # Packet forwarding 67 #options DIRECTED_BROADCAST # Broadcast across subnets 68 69 #options MROUTING # Multicast routing 70 #options PIM # Protocol Independent Multicast 71 options NS # XNS 72 #options NSIP # XNS tunneling over IP 73 options ISO,TPIP # OSI 74 #options EON # OSI tunneling over IP 75 options CCITT,LLC,HDLC # X.25 76 options NETATALK # AppleTalk networking protocols 77 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 79 options PPP_BSDCOMP # BSD-Compress compression support for PPP 80 options PPP_DEFLATE # Deflate compression support for PPP 81 options PPP_FILTER # Active filter support for PPP (requires bpf) 82 options PFIL_HOOKS # pfil(9) packet filter hooks 83 options IPFILTER_LOG # ipmon(8) log support 84 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86 #options ALTQ # Manipulate network interfaces' output queues 87 #options ALTQ_BLUE # Stochastic Fair Blue 88 #options ALTQ_CBQ # Class-Based Queueing 89 #options ALTQ_CDNR # Diffserv Traffic Conditioner 90 #options ALTQ_FIFOQ # First-In First-Out Queue 91 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 92 #options ALTQ_HFSC # Hierarchical Fair Service Curve 93 #options ALTQ_LOCALQ # Local queueing discipline 94 #options ALTQ_PRIQ # Priority Queueing 95 #options ALTQ_RED # Random Early Detection 96 #options ALTQ_RIO # RED with IN/OUT 97 #options ALTQ_WFQ # Weighted Fair Queueing 98 99 # Filesystems 100 file-system FFS # Berkeley fast file system 101 file-system EXT2FS # second extended file system (linux) 102 #file-system LFS # log-structured filesystem (experimental) 103 104 file-system MFS # Memory based filesystem 105 106 file-system NFS # Network File System client side code 107 file-system ADOSFS # AmigaDOS file system 108 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 109 file-system MSDOSFS # MS-DOS filesystem 110 111 file-system KERNFS # kernel data-structure filesystem 112 113 file-system FDESC # user file descriptor filesystem 114 file-system NULLFS # loopback filesystem 115 file-system OVERLAY # overlay filesystem 116 #file-system PORTAL # Portal filesystem 117 file-system PROCFS # /proc filesystem 118 file-system UMAPFS # NULLFS + uid and gid remapping 119 file-system UNION # union filesystem 120 121 # Filesystem options 122 123 #options FFS_EI # FFS Endian Independant support 124 125 options QUOTA # User and group quotas in FFS 126 options SOFTDEP # FFS soft updates support. 127 options NFSSERVER # Network File System server side code 128 129 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 130 # immutable) behave as system flags. 131 132 # 133 # Compatibility options for various existing systems 134 # 135 136 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 137 options COMPAT_43 # compatibility with 4.3BSD interfaces 138 options COMPAT_09 # compatibility with NetBSD 0.9 139 options COMPAT_10 # compatibility with NetBSD 1.0 140 options COMPAT_12 # compatibility with NetBSD 1.2 141 options COMPAT_13 # compatibility with NetBSD 1.3 142 options COMPAT_14 # compatibility with NetBSD 1.4 143 options COMPAT_15 # compatibility with NetBSD 1.5 144 options COMPAT_16 # compatibility with NetBSD 1.6 145 options COMPAT_SUNOS # Support to run Sun (m68k) executables 146 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 147 options COMPAT_NOMID # allow nonvalid machine id executables 148 #options COMPAT_LINUX # Support to run Linux/m68k executables 149 150 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 151 options COMPAT_AOUT_M68K # actually make some system calls work. 152 153 # 154 # Support for System V IPC facilities. 155 # 156 options SYSVSHM # System V-like shared memory 157 options SYSVMSG # System V-like messages 158 options SYSVSEM # System V-like semaphores 159 #options SEMMNI=10 # number of semaphore identifiers 160 #options SEMMNS=60 # number of semaphores in system 161 #options SEMUME=10 # max number of undo entries per process 162 #options SEMMNU=30 # number of undo structures in system 163 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 164 165 # 166 # Support for various kernel options 167 # 168 169 options KTRACE # system call tracing support 170 options SYSTRACE # system call vetting via systrace(1) 171 options LKM # Loadable kernel modules 172 #options INSECURE # disable kernel security levels 173 options SCSIVERBOSE # human readable SCSI error messages 174 options USERCONF # userconf(4) support 175 options NTP # NTP phase/frequency locked loop 176 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 177 178 # Enable experimental buffer queue strategy for better responsiveness under 179 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 180 #options NEW_BUFQ_STRATEGY 181 182 # 183 # Misc. debugging options 184 # 185 options DDB # Kernel debugger 186 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 187 options DIAGNOSTIC # Extra kernel sanity checks 188 #options DEBUG # Enable misc. kernel debugging code 189 #options SYSCALL_DEBUG # debug all syscalls. 190 #options SCSIDEBUG # Add SCSI debugging statements 191 #options PANICBUTTON # Forced crash via keypress (?) 192 193 # 194 # Amiga specific options 195 # 196 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 197 # first bank of RAM. (default: unlimited) 198 #options NKPTADD=4 # set this for 4 additional KPT pages 199 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 200 # per 16 MB (1<<24 bytes) of RAM 201 # uncomment and decrease this, or uncomment and 202 # increase NKPTADD if you get "out of PT pages" 203 # panics. 204 205 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 206 # before the 10 secondinterval ends, or that KBDRESET does work at all. 207 #options KBDRESET # sync on Ctrl-Amiga-Amiga 208 209 # These options improve performance with the built-in serial port 210 # on slower Amigas. Try the larger buffers first then lev6_defer. 211 #options SERIBUF_SIZE=4096 212 #options SEROBUF_SIZE=32 213 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 214 215 #options DEVRELOAD # implement /dev/reload 216 # # currently only works for a.out kernels 217 218 options RETINACONSOLE # enable code to allow retina to be console 219 options ULOWELLCONSOLE # enable code to allow a2410 to be console 220 options CL5426CONSOLE # Cirrus console 221 options CV64CONSOLE # CyberVision console 222 options TSENGCONSOLE # Tseng console 223 options CV3DCONSOLE # CyberVision 64/3D console 224 225 options GRF_ECS # Enhanced Chip Set 226 options GRF_NTSC # NTSC 227 options GRF_PAL # PAL 228 options GRF_A2024 # Support for the A2024 229 options GRF_AGA # AGA Chip Set 230 options GRF_AGA_VGA # AGA VGAONLY timing 231 options GRF_SUPER72 # AGA Super-72 232 #options KFONT_8X11 # 8x11 font 233 234 # select a font for the console according to the character set and keymap 235 # you want to use 236 options KFONT_CONS_ISO8859_1 237 #options KFONT_CONS_ISO8859_2 238 239 # This is how you would tell the kernel the A2410 oscillator frequencies: 240 # The used frequencies are the defaults, and do not need option setting 241 #options ULOWELL_OSC1=36000000 242 #options ULOWELL_OSC2=66667000 243 244 # This is how you specify the blitting speed, higher values may speed up blits 245 # a littel bit. If you raise this value too much some trash may appear. 246 # the commented version is the default. 247 #options RH_MEMCLK=61000000 248 # this option enables the 64 bit sprite which does not work 249 # for quite a few people. E.g. The cursor sprite will turn to a block 250 # when moved to the top of the screen in X. 251 #options RH_64BIT_SPRITE 252 # enables fast scroll code appears to now work on 040 systems. 253 #options RETINA_SPEED_HACK 254 # enables the Hardwarecursor which does not work on some systems. 255 #options RH_HARDWARECURSOR 256 257 # wscons aware interface to amiga custom chips. 258 # If you enable it enable also wskbd. 259 # 260 261 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 262 #wsdisplay0 at amidisplaycc0 console ? 263 #options WSEMUL_VT100 264 #options FONT_VT220L8x10 265 #options FONT_VT220ISO8x16 266 267 grfcc0 at mainbus0 # custom chips 268 grfrt0 at zbus0 # retina II 269 grfrh0 at zbus0 # retina III 270 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 271 grful0 at zbus0 # A2410 272 grfcv0 at zbus0 # CyberVision 64 273 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 274 grfcv3d0 at zbus0 # CyberVision 64/3D 275 276 grf0 at grfcc0 277 grf1 at grfrt0 278 grf2 at grfrh0 279 grf3 at grfcl? 280 grf4 at grful0 281 grf5 at grfcv0 282 grf6 at grfet? 283 grf7 at grfcv3d0 284 ite0 at grf0 # terminal emulators for grfs 285 ite1 at grf1 # terminal emulators for grfs 286 ite2 at grf2 # terminal emulators for grfs 287 ite3 at grf3 # terminal emulators for grfs 288 ite4 at grf4 # terminal emulators for grfs 289 ite5 at grf5 # terminal emulators for grfs 290 ite6 at grf6 # terminal emulators for grfs 291 ite7 at grf7 # terminal emulators for grfs 292 293 msc0 at zbus0 # A2232 MSC multiport serial. 294 mfc0 at zbus0 # MultiFaceCard I/O board 295 mfcs0 at mfc0 unit 0 # MFC serial 296 mfcs1 at mfc0 unit 1 # MFC serial 297 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 298 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 299 #mfcs2 at mfc1 unit 0 300 #mfcs3 at mfc1 unit 1 301 #mfcp1 at mfc1 unit 0 302 303 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 304 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 305 com* at hyper? port ? # Hypercom3/4 serial ports 306 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 307 308 #options IOBZCLOCK=22118400 # default, uncomment the next line 309 #options IOBZCLOCK=24000000 # if needed. 310 311 iobl* at zbus? # zbus IOBlix 312 com* at iobl? port ? # IOBlix serial ports 313 lpt* at iobl? port ? # IOBlix parallel ports 314 315 316 # 317 # Keyboard device. Optionally can attach a wskbd. 318 # wskbd works together with a wsdisplay so enable them both if you will. 319 # Don't enable wskbd if you use ite. 320 # 321 # XXX in std.amiga: kbd0 at mainbus0 322 323 #wskbd0 at kbd0 console ? 324 325 326 # 327 # Amiga Mainboard devices (sans graphics and keyboard) 328 # 329 330 ser0 at mainbus0 # Amiga onboard serial 331 par0 at mainbus0 # Amiga onboard parallel 332 ms* at mainbus0 # Amiga mice 333 fdc0 at mainbus0 # Amiga FDC 334 fd* at fdc0 unit ? # floppy disks on the later 335 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 336 a2kbbc0 at mainbus0 # A2000 battery backed clock 337 aucc* at mainbus0 # Amiga CC audio 338 audio* at aucc? 339 340 341 #wsmouse* at ms? 342 343 344 # 345 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 346 # 347 348 # Alas, Melody-Z2 dont configure in the DraCo bus. 349 melody* at zbus0 # Melody MPEG audio decoder 350 audio* at melody? 351 352 repulse* at zbus0 # ALiENDESiGN Repulse 353 audio* at repulse? 354 355 toccata* at zbus0 # MacroSystem GmbH Toccata 356 audio* at toccata? 357 358 # Ethernet cards: 359 le* at zbus0 # A2065, Ameristar, Ariadne 360 ne* at zbus0 # AriadneII, X-surf 361 ed* at zbus0 # Hydra, ASDG LanRover 362 es* at zbus0 # CEI A4066 EthernetPLUS 363 qn* at zbus0 # Quicknet 364 365 # Arcnet 366 bah* at zbus0 # C=/Ameristar A2060 / 560 367 368 # Greater Valley Product Bus 369 gvpbus* at zbus0 370 371 # scsi stuff, all possible 372 gtsc0 at gvpbus? # GVP series II scsi 373 scsibus* at gtsc0 374 ahsc0 at mainbus0 # A3000 scsi 375 scsibus* at ahsc0 376 atzsc0 at zbus0 # A2091 scsi 377 scsibus* at atzsc0 378 wstsc0 at zbus0 # Wordsync II scsi 379 scsibus* at wstsc0 380 ivsc0 at zbus0 # IVS scsi 381 scsibus* at ivsc0 382 mlhsc0 at zbus0 # Hacker scsi 383 scsibus* at mlhsc0 384 otgsc0 at zbus0 # 12 gauge scsi 385 scsibus* at otgsc0 386 zssc0 at zbus0 # Zeus scsi 387 scsibus* at zssc0 388 mgnsc0 at zbus0 # Magnum scsi 389 scsibus* at mgnsc0 390 wesc0 at zbus0 # Warp Engine scsi 391 scsibus* at wesc0 392 afsc0 at zbus0 # A4091 scsi 393 scsibus* at afsc0 394 aftsc0 at mainbus0 # A4000T scsi 395 scsibus* at aftsc0 396 flsc0 at zbus0 # FastlaneZ3 scsi 397 scsibus* at flsc0 398 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 399 scsibus* at bzsc0 400 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 401 scsibus* at bzivsc0 402 bztzsc0 at zbus0 # Blizzard 2060 scsi 403 scsibus* at bztzsc0 404 cbsc0 at zbus0 # CyberSCSI I 405 scsibus* at cbsc0 406 cbiisc0 at zbus0 # CyberSCSI II 407 scsibus* at cbiisc0 408 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 409 scsibus* at cbiiisc0 410 empsc0 at zbus0 # Emplant scsi 411 scsibus* at empsc0 412 #idesc0 at mainbus0 # A4000 & A1200 IDE 413 #scsibus* at idesc0 414 415 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 416 # <<< are uncommented >>> 417 wdc0 at mainbus0 # A4000 & A1200 IDE bus 418 atabus* at wdc? channel ? # ATA bus 419 wd* at atabus? drive ? # + drives 420 atapibus* at atabus? # ATAPI bus 421 cd* at atapibus? drive ? # ATAPI CD-ROM drives 422 sd* at atapibus? drive ? # ATAPI disk drives 423 424 pccard0 at mainbus0 425 pcmcia* at pccard0 426 com* at pcmcia? function ? # Modems and serial cards 427 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 428 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 429 wdc* at pcmcia? function ? 430 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 431 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 432 mbe* at pcmcia? function ? # MB8696x based Ethernet 433 ne* at pcmcia? function ? # NE2000-compatible Ethernet 434 sm* at pcmcia? function ? # Megahertz Ethernet 435 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 436 com* at mhzc? 437 sm* at mhzc? 438 439 440 441 442 # each hard drive from low target to high 443 # will configure to the next available sd unit number 444 sd* at scsibus? target ? lun ? # scsi disks 445 st* at scsibus? target ? lun ? # scsi tapes 446 cd* at scsibus? target ? lun ? # scsi cds 447 ch* at scsibus? target ? lun ? # scsi autochangers 448 ss* at scsibus? target ? lun ? # scsi scanner 449 uk* at scsibus? target ? lun ? # scsi unknown 450 451 pseudo-device loop # loopback network interface 452 pseudo-device sl 1 # SLIP network interfaces 453 pseudo-device ppp 1 # PPP network interfaces 454 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 455 pseudo-device tun 1 # network tunnel line discipline 456 #pseudo-device gre 2 # generic L3 over IP tunnel 457 pseudo-device bpfilter 16 # Berkeley packet filter 458 pseudo-device ipfilter # IP Filter package 459 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 460 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 461 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 462 pseudo-device vlan # IEEE 802.1q encapsulation 463 pseudo-device bridge # simple inter-network bridging 464 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 465 #pseudo-device pf # PF packet filter 466 #pseudo-device pflog # PF log if 467 468 pseudo-device view 4 # views (needed for grfcc) 469 pseudo-device pty # pseudo-terminals 470 pseudo-device clockctl # user control of clock subsystem 471 472 #pseudo-device wsfont # wsfont(4) dynamic font loading support 473 474 pseudo-device vnd 4 # vnode pseudo-disks 475 pseudo-device ccd 4 # concatenated disk devices 476 #pseudo-device cgd 4 # cryptographic disk devices 477 pseudo-device raid 8 # RAIDframe disk driver 478 options RAID_AUTOCONFIG # auto-configuration of RAID components 479 # Options to enable various other RAIDframe RAID types. 480 # options RF_INCLUDE_EVENODD=1 481 # options RF_INCLUDE_RAID5_RS=1 482 # options RF_INCLUDE_PARITYLOGGING=1 483 # options RF_INCLUDE_CHAINDECLUSTER=1 484 # options RF_INCLUDE_INTERDECLUSTER=1 485 # options RF_INCLUDE_PARITY_DECLUSTERING=1 486 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 487 488 pseudo-device rnd # /dev/random and in-kernel generator 489 #options RND_COM # use "com" randomness as well (BROKEN) 490 491 pseudo-device ksyms # /dev/ksyms (kernel symbols) 492 493 config netbsd root on ? type ? 494
Indexes created Wed Oct 29 20:09:47 GMT 2025