AMIGA revision 1.66.2.3.4.1
1 # $NetBSD: AMIGA,v 1.66.2.3.4.1 2007/08/11 14:40:55 bouyer Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.18.2.3.4.1 2007/08/11 14:40:04 bouyer Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.66.2.3.4.1 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options BB060STUPIDROM # You need this, if you have a non-DraCo 41 # MC68060 with an OS ROM up to (at least) 42 # V40 (OS3.1) and want to boot with the 43 # bootblock. 44 # You do not need this if you have a DraCo, 45 # have no 68060 or NEVER use the bootblock 46 options P5PPC68KBOARD # Phase5 PPC/68K board support 47 # 48 # processors this kernel should support 49 # 50 options M68060 # support for 060 51 options M060SP # MC68060 software support (Required for 060) 52 options M68040 # support for 040 53 options FPSP # MC68040 floating point support 54 options M68030 # support for 030 55 options M68020 # support for 020/851 56 options FPU_EMULATE # FPU emulation 57 58 # 59 # Networking options 60 # 61 options INET # IP networking support (Required) 62 options INET6 # IPV6 63 #options IPSEC # IP security 64 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65 #options IPSEC_DEBUG # debug for IP security 66 #options GATEWAY # Packet forwarding 67 #options DIRECTED_BROADCAST # Broadcast across subnets 68 69 #options MROUTING # Multicast routing 70 options NS # XNS 71 #options NSIP # XNS tunneling over IP 72 #options ISO,TPIP # OSI 73 #options EON # OSI tunneling over IP 74 options CCITT,LLC,HDLC # X.25 75 options NETATALK # AppleTalk networking protocols 76 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 78 options PPP_BSDCOMP # BSD-Compress compression support for PPP 79 options PPP_DEFLATE # Deflate compression support for PPP 80 options PPP_FILTER # Active filter support for PPP (requires bpf) 81 options PFIL_HOOKS # pfil(9) packet filter hooks 82 options IPFILTER_LOG # ipmon(8) log support 83 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 84 85 #options ALTQ # Manipulate network interfaces' output queues 86 #options ALTQ_BLUE # Stochastic Fair Blue 87 #options ALTQ_CBQ # Class-Based Queueing 88 #options ALTQ_CDNR # Diffserv Traffic Conditioner 89 #options ALTQ_FIFOQ # First-In First-Out Queue 90 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 91 #options ALTQ_HFSC # Hierarchical Fair Service Curve 92 #options ALTQ_LOCALQ # Local queueing discipline 93 #options ALTQ_PRIQ # Priority Queueing 94 #options ALTQ_RED # Random Early Detection 95 #options ALTQ_RIO # RED with IN/OUT 96 #options ALTQ_WFQ # Weighted Fair Queueing 97 98 # Filesystems 99 file-system FFS # Berkeley fast file system 100 file-system EXT2FS # second extended file system (linux) 101 #file-system LFS # log-structured filesystem (experimental) 102 103 file-system MFS # Memory based filesystem 104 105 file-system NFS # Network File System client side code 106 file-system ADOSFS # AmigaDOS file system 107 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 108 file-system MSDOSFS # MS-DOS filesystem 109 110 file-system KERNFS # kernel data-structure filesystem 111 112 file-system FDESC # user file descriptor filesystem 113 file-system NULLFS # loopback filesystem 114 file-system OVERLAY # overlay filesystem 115 #file-system PORTAL # Portal filesystem 116 file-system PROCFS # /proc filesystem 117 file-system UMAPFS # NULLFS + uid and gid remapping 118 file-system UNION # union filesystem 119 120 # Filesystem options 121 122 #options FFS_EI # FFS Endian Independant support 123 124 options QUOTA # User and group quotas in FFS 125 options SOFTDEP # FFS soft updates support. 126 options NFSSERVER # Network File System server side code 127 128 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 129 # immutable) behave as system flags. 130 131 # 132 # Compatibility options for various existing systems 133 # 134 135 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 136 options COMPAT_43 # compatibility with 4.3BSD interfaces 137 options COMPAT_09 # compatibility with NetBSD 0.9 138 options COMPAT_10 # compatibility with NetBSD 1.0 139 options COMPAT_12 # compatibility with NetBSD 1.2 140 options COMPAT_13 # compatibility with NetBSD 1.3 141 options COMPAT_14 # compatibility with NetBSD 1.4 142 options COMPAT_15 # compatibility with NetBSD 1.5 143 options COMPAT_16 # compatibility with NetBSD 1.6 144 options COMPAT_SUNOS # Support to run Sun (m68k) executables 145 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 146 options COMPAT_NOMID # allow nonvalid machine id executables 147 #options COMPAT_LINUX # Support to run Linux/m68k executables 148 149 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 150 options COMPAT_AOUT_M68K # actually make some system calls work. 151 152 # 153 # Support for System V IPC facilities. 154 # 155 options SYSVSHM # System V-like shared memory 156 options SYSVMSG # System V-like messages 157 options SYSVSEM # System V-like semaphores 158 #options SEMMNI=10 # number of semaphore identifiers 159 #options SEMMNS=60 # number of semaphores in system 160 #options SEMUME=10 # max number of undo entries per process 161 #options SEMMNU=30 # number of undo structures in system 162 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 163 164 # 165 # Support for various kernel options 166 # 167 168 options KTRACE # system call tracing support 169 options SYSTRACE # system call vetting via systrace(1) 170 options LKM # Loadable kernel modules 171 #options INSECURE # disable kernel security levels 172 options SCSIVERBOSE # human readable SCSI error messages 173 options USERCONF # userconf(4) support 174 options NTP # NTP phase/frequency locked loop 175 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 176 177 # Enable experimental buffer queue strategy for better responsiveness under 178 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 179 #options NEW_BUFQ_STRATEGY 180 181 # 182 # Misc. debugging options 183 # 184 options DDB # Kernel debugger 185 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 186 options DIAGNOSTIC # Extra kernel sanity checks 187 #options DEBUG # Enable misc. kernel debugging code 188 #options SYSCALL_DEBUG # debug all syscalls. 189 #options SCSIDEBUG # Add SCSI debugging statements 190 #options PANICBUTTON # Forced crash via keypress (?) 191 192 # 193 # Amiga specific options 194 # 195 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 196 # first bank of RAM. (default: unlimited) 197 #options NKPTADD=4 # set this for 4 additional KPT pages 198 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 199 # per 16 MB (1<<24 bytes) of RAM 200 # uncomment and decrease this, or uncomment and 201 # increase NKPTADD if you get "out of PT pages" 202 # panics. 203 204 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 205 # before the 10 secondinterval ends, or that KBDRESET does work at all. 206 #options KBDRESET # sync on Ctrl-Amiga-Amiga 207 208 # These options improve performance with the built-in serial port 209 # on slower Amigas. Try the larger buffers first then lev6_defer. 210 #options SERIBUF_SIZE=4096 211 #options SEROBUF_SIZE=32 212 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 213 214 #options DEVRELOAD # implement /dev/reload 215 # # currently only works for a.out kernels 216 217 options RETINACONSOLE # enable code to allow retina to be console 218 options ULOWELLCONSOLE # enable code to allow a2410 to be console 219 options CL5426CONSOLE # Cirrus console 220 options CV64CONSOLE # CyberVision console 221 options TSENGCONSOLE # Tseng console 222 options CV3DCONSOLE # CyberVision 64/3D console 223 224 options GRF_ECS # Enhanced Chip Set 225 options GRF_NTSC # NTSC 226 options GRF_PAL # PAL 227 options GRF_A2024 # Support for the A2024 228 options GRF_AGA # AGA Chip Set 229 options GRF_AGA_VGA # AGA VGAONLY timing 230 options GRF_SUPER72 # AGA Super-72 231 #options KFONT_8X11 # 8x11 font 232 233 # select a font for the console according to the character set and keymap 234 # you want to use 235 options KFONT_CONS_ISO8859_1 236 #options KFONT_CONS_ISO8859_2 237 238 # This is how you would tell the kernel the A2410 oscillator frequencies: 239 # The used frequencies are the defaults, and do not need option setting 240 #options ULOWELL_OSC1=36000000 241 #options ULOWELL_OSC2=66667000 242 243 # This is how you specify the blitting speed, higher values may speed up blits 244 # a littel bit. If you raise this value too much some trash may appear. 245 # the commented version is the default. 246 #options RH_MEMCLK=61000000 247 # this option enables the 64 bit sprite which does not work 248 # for quite a few people. E.g. The cursor sprite will turn to a block 249 # when moved to the top of the screen in X. 250 #options RH_64BIT_SPRITE 251 # enables fast scroll code appears to now work on 040 systems. 252 #options RETINA_SPEED_HACK 253 # enables the Hardwarecursor which does not work on some systems. 254 #options RH_HARDWARECURSOR 255 256 # wscons aware interface to amiga custom chips. 257 # If you enable it enable also wskbd. 258 # 259 260 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 261 #wsdisplay0 at amidisplaycc0 console ? 262 #options WSEMUL_VT100 263 #options FONT_VT220L8x10 264 #options FONT_VT220ISO8x16 265 266 grfcc0 at mainbus0 # custom chips 267 grfrt0 at zbus0 # retina II 268 grfrh0 at zbus0 # retina III 269 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 270 grful0 at zbus0 # A2410 271 grfcv0 at zbus0 # CyberVision 64 272 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 273 grfcv3d0 at zbus0 # CyberVision 64/3D 274 275 grf0 at grfcc0 276 grf1 at grfrt0 277 grf2 at grfrh0 278 grf3 at grfcl? 279 grf4 at grful0 280 grf5 at grfcv0 281 grf6 at grfet? 282 grf7 at grfcv3d0 283 ite0 at grf0 # terminal emulators for grfs 284 ite1 at grf1 # terminal emulators for grfs 285 ite2 at grf2 # terminal emulators for grfs 286 ite3 at grf3 # terminal emulators for grfs 287 ite4 at grf4 # terminal emulators for grfs 288 ite5 at grf5 # terminal emulators for grfs 289 ite6 at grf6 # terminal emulators for grfs 290 ite7 at grf7 # terminal emulators for grfs 291 292 msc0 at zbus0 # A2232 MSC multiport serial. 293 mfc0 at zbus0 # MultiFaceCard I/O board 294 mfcs0 at mfc0 unit 0 # MFC serial 295 mfcs1 at mfc0 unit 1 # MFC serial 296 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 297 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 298 #mfcs2 at mfc1 unit 0 299 #mfcs3 at mfc1 unit 1 300 #mfcp1 at mfc1 unit 0 301 302 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 303 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 304 com* at hyper? port ? # Hypercom3/4 serial ports 305 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 306 307 #options IOBZCLOCK=22118400 # default, uncomment the next line 308 #options IOBZCLOCK=24000000 # if needed. 309 310 iobl* at zbus? # zbus IOBlix 311 com* at iobl? port ? # IOBlix serial ports 312 lpt* at iobl? port ? # IOBlix parallel ports 313 314 315 # 316 # Keyboard device. Optionally can attach a wskbd. 317 # wskbd works together with a wsdisplay so enable them both if you will. 318 # Don't enable wskbd if you use ite. 319 # 320 # XXX in std.amiga: kbd0 at mainbus0 321 322 #wskbd0 at kbd0 console ? 323 324 325 # 326 # Amiga Mainboard devices (sans graphics and keyboard) 327 # 328 329 ser0 at mainbus0 # Amiga onboard serial 330 par0 at mainbus0 # Amiga onboard parallel 331 ms* at mainbus0 # Amiga mice 332 fdc0 at mainbus0 # Amiga FDC 333 fd* at fdc0 unit ? # floppy disks on the later 334 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 335 a2kbbc0 at mainbus0 # A2000 battery backed clock 336 aucc* at mainbus0 # Amiga CC audio 337 audio* at aucc? 338 339 340 #wsmouse* at ms? 341 342 343 # 344 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 345 # 346 347 # Alas, Melody-Z2 dont configure in the DraCo bus. 348 melody* at zbus0 # Melody MPEG audio decoder 349 audio* at melody? 350 351 repulse* at zbus0 # ALiENDESiGN Repulse 352 audio* at repulse? 353 354 toccata* at zbus0 # MacroSystem GmbH Toccata 355 audio* at toccata? 356 357 # Ethernet cards: 358 le* at zbus0 # A2065, Ameristar, Ariadne 359 ne* at zbus0 # AriadneII, X-surf 360 ed* at zbus0 # Hydra, ASDG LanRover 361 es* at zbus0 # CEI A4066 EthernetPLUS 362 qn* at zbus0 # Quicknet 363 364 # Arcnet 365 bah* at zbus0 # C=/Ameristar A2060 / 560 366 367 # Greater Valley Product Bus 368 gvpbus* at zbus0 369 370 # scsi stuff, all possible 371 gtsc0 at gvpbus? # GVP series II scsi 372 scsibus* at gtsc0 373 ahsc0 at mainbus0 # A3000 scsi 374 scsibus* at ahsc0 375 atzsc0 at zbus0 # A2091 scsi 376 scsibus* at atzsc0 377 wstsc0 at zbus0 # Wordsync II scsi 378 scsibus* at wstsc0 379 ivsc0 at zbus0 # IVS scsi 380 scsibus* at ivsc0 381 mlhsc0 at zbus0 # Hacker scsi 382 scsibus* at mlhsc0 383 otgsc0 at zbus0 # 12 gauge scsi 384 scsibus* at otgsc0 385 zssc0 at zbus0 # Zeus scsi 386 scsibus* at zssc0 387 mgnsc0 at zbus0 # Magnum scsi 388 scsibus* at mgnsc0 389 wesc0 at zbus0 # Warp Engine scsi 390 scsibus* at wesc0 391 afsc0 at zbus0 # A4091 scsi 392 scsibus* at afsc0 393 aftsc0 at mainbus0 # A4000T scsi 394 scsibus* at aftsc0 395 flsc0 at zbus0 # FastlaneZ3 scsi 396 scsibus* at flsc0 397 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 398 scsibus* at bzsc0 399 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 400 scsibus* at bzivsc0 401 bztzsc0 at zbus0 # Blizzard 2060 scsi 402 scsibus* at bztzsc0 403 cbsc0 at zbus0 # CyberSCSI I 404 scsibus* at cbsc0 405 cbiisc0 at zbus0 # CyberSCSI II 406 scsibus* at cbiisc0 407 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 408 scsibus* at cbiiisc0 409 empsc0 at zbus0 # Emplant scsi 410 scsibus* at empsc0 411 #idesc0 at mainbus0 # A4000 & A1200 IDE 412 #scsibus* at idesc0 413 414 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 415 # <<< are uncommented >>> 416 wdc0 at mainbus0 # A4000 & A1200 IDE bus 417 atabus* at wdc? channel ? # ATA bus 418 wd* at atabus? drive ? # + drives 419 atapibus* at atabus? # ATAPI bus 420 cd* at atapibus? drive ? # ATAPI CD-ROM drives 421 sd* at atapibus? drive ? # ATAPI disk drives 422 423 pccard0 at mainbus0 424 pcmcia* at pccard0 425 com* at pcmcia? function ? # Modems and serial cards 426 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 427 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 428 wdc* at pcmcia? function ? 429 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 430 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 431 mbe* at pcmcia? function ? # MB8696x based Ethernet 432 ne* at pcmcia? function ? # NE2000-compatible Ethernet 433 sm* at pcmcia? function ? # Megahertz Ethernet 434 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 435 com* at mhzc? 436 sm* at mhzc? 437 438 439 440 441 # each hard drive from low target to high 442 # will configure to the next available sd unit number 443 sd* at scsibus? target ? lun ? # scsi disks 444 st* at scsibus? target ? lun ? # scsi tapes 445 cd* at scsibus? target ? lun ? # scsi cds 446 ch* at scsibus? target ? lun ? # scsi autochangers 447 ss* at scsibus? target ? lun ? # scsi scanner 448 uk* at scsibus? target ? lun ? # scsi unknown 449 450 pseudo-device loop # loopback network interface 451 pseudo-device sl 1 # SLIP network interfaces 452 pseudo-device ppp 1 # PPP network interfaces 453 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 454 pseudo-device tun 1 # network tunnel line discipline 455 #pseudo-device gre 2 # generic L3 over IP tunnel 456 pseudo-device bpfilter 16 # Berkeley packet filter 457 pseudo-device ipfilter # IP Filter package 458 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 459 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 460 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 461 pseudo-device vlan # IEEE 802.1q encapsulation 462 pseudo-device bridge # simple inter-network bridging 463 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 464 465 pseudo-device view 4 # views (needed for grfcc) 466 pseudo-device pty # pseudo-terminals 467 pseudo-device clockctl # user control of clock subsystem 468 469 #pseudo-device wsfont # wsfont(4) dynamic font loading support 470 471 pseudo-device vnd 4 # vnode pseudo-disks 472 pseudo-device ccd 4 # concatenated disk devices 473 #pseudo-device cgd 4 # cryptographic disk devices 474 pseudo-device raid 8 # RAIDframe disk driver 475 options RAID_AUTOCONFIG # auto-configuration of RAID components 476 # Options to enable various other RAIDframe RAID types. 477 # options RF_INCLUDE_EVENODD=1 478 # options RF_INCLUDE_RAID5_RS=1 479 # options RF_INCLUDE_PARITYLOGGING=1 480 # options RF_INCLUDE_CHAINDECLUSTER=1 481 # options RF_INCLUDE_INTERDECLUSTER=1 482 # options RF_INCLUDE_PARITY_DECLUSTERING=1 483 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 484 485 pseudo-device rnd # /dev/random and in-kernel generator 486 #options RND_COM # use "com" randomness as well (BROKEN) 487 488 pseudo-device ksyms # /dev/ksyms (kernel symbols) 489 490 config netbsd root on ? type ? 491
Indexes created Thu Oct 30 03:10:01 GMT 2025