AMIGA revision 1.68
1# $NetBSD: AMIGA,v 1.68 2004/06/28 21:09:22 bouyer Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.23 2004/06/28 21:07:47 bouyer Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.68 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options BB060STUPIDROM # You need this, if you have a non-DraCo 41 # MC68060 with an OS ROM up to (at least) 42 # V40 (OS3.1) and want to boot with the 43 # bootblock. 44 # You do not need this if you have a DraCo, 45 # have no 68060 or NEVER use the bootblock 46options P5PPC68KBOARD # Phase5 PPC/68K board support 47# 48# processors this kernel should support 49# 50options M68060 # support for 060 51options M060SP # MC68060 software support (Required for 060) 52options M68040 # support for 040 53options FPSP # MC68040 floating point support 54options M68030 # support for 030 55options M68020 # support for 020/851 56options FPU_EMULATE # FPU emulation 57 58# 59# Networking options 60# 61options INET # IP networking support (Required) 62options INET6 # IPV6 63#options IPSEC # IP security 64#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65#options IPSEC_DEBUG # debug for IP security 66#options GATEWAY # Packet forwarding 67#options DIRECTED_BROADCAST # Broadcast across subnets 68 69#options MROUTING # Multicast routing 70options NS # XNS 71#options NSIP # XNS tunneling over IP 72options ISO,TPIP # OSI 73#options EON # OSI tunneling over IP 74options CCITT,LLC,HDLC # X.25 75options NETATALK # AppleTalk networking protocols 76#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 78options PPP_BSDCOMP # BSD-Compress compression support for PPP 79options PPP_DEFLATE # Deflate compression support for PPP 80options PPP_FILTER # Active filter support for PPP (requires bpf) 81options PFIL_HOOKS # pfil(9) packet filter hooks 82options IPFILTER_LOG # ipmon(8) log support 83#options IPFILTER_DEFAULT_BLOCK # block all packets by default 84 85#options ALTQ # Manipulate network interfaces' output queues 86#options ALTQ_BLUE # Stochastic Fair Blue 87#options ALTQ_CBQ # Class-Based Queueing 88#options ALTQ_CDNR # Diffserv Traffic Conditioner 89#options ALTQ_FIFOQ # First-In First-Out Queue 90#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 91#options ALTQ_HFSC # Hierarchical Fair Service Curve 92#options ALTQ_LOCALQ # Local queueing discipline 93#options ALTQ_PRIQ # Priority Queueing 94#options ALTQ_RED # Random Early Detection 95#options ALTQ_RIO # RED with IN/OUT 96#options ALTQ_WFQ # Weighted Fair Queueing 97 98# Filesystems 99file-system FFS # Berkeley fast file system 100file-system EXT2FS # second extended file system (linux) 101#file-system LFS # log-structured filesystem (experimental) 102 103file-system MFS # Memory based filesystem 104 105file-system NFS # Network File System client side code 106file-system ADOSFS # AmigaDOS file system 107file-system CD9660 # ISO 9660 + Rock Ridge filesystem 108file-system MSDOSFS # MS-DOS filesystem 109 110file-system KERNFS # kernel data-structure filesystem 111 112file-system FDESC # user file descriptor filesystem 113file-system NULLFS # loopback filesystem 114file-system OVERLAY # overlay filesystem 115#file-system PORTAL # Portal filesystem 116file-system PROCFS # /proc filesystem 117file-system UMAPFS # NULLFS + uid and gid remapping 118file-system UNION # union filesystem 119 120# Filesystem options 121 122#options FFS_EI # FFS Endian Independant support 123 124options QUOTA # User and group quotas in FFS 125options SOFTDEP # FFS soft updates support. 126options NFSSERVER # Network File System server side code 127 128#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 129 # immutable) behave as system flags. 130 131# 132# Compatibility options for various existing systems 133# 134 135#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 136options COMPAT_43 # compatibility with 4.3BSD interfaces 137options COMPAT_09 # compatibility with NetBSD 0.9 138options COMPAT_10 # compatibility with NetBSD 1.0 139options COMPAT_12 # compatibility with NetBSD 1.2 140options COMPAT_13 # compatibility with NetBSD 1.3 141options COMPAT_14 # compatibility with NetBSD 1.4 142options COMPAT_15 # compatibility with NetBSD 1.5 143options COMPAT_16 # compatibility with NetBSD 1.6 144options COMPAT_SUNOS # Support to run Sun (m68k) executables 145options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 146options COMPAT_NOMID # allow nonvalid machine id executables 147#options COMPAT_LINUX # Support to run Linux/m68k executables 148 149options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 150options COMPAT_AOUT_M68K # actually make some system calls work. 151 152# 153# Support for System V IPC facilities. 154# 155options SYSVSHM # System V-like shared memory 156options SYSVMSG # System V-like messages 157options SYSVSEM # System V-like semaphores 158#options SEMMNI=10 # number of semaphore identifiers 159#options SEMMNS=60 # number of semaphores in system 160#options SEMUME=10 # max number of undo entries per process 161#options SEMMNU=30 # number of undo structures in system 162options P1003_1B_SEMAPHORE # p1003.1b semaphore support 163 164# 165# Support for various kernel options 166# 167 168options KTRACE # system call tracing support 169options SYSTRACE # system call vetting via systrace(1) 170options LKM # Loadable kernel modules 171#options INSECURE # disable kernel security levels 172options SCSIVERBOSE # human readable SCSI error messages 173options USERCONF # userconf(4) support 174options NTP # NTP phase/frequency locked loop 175#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 176 177# Enable experimental buffer queue strategy for better responsiveness under 178# high disk I/O load. Use it with caution - it's not proven to be stable yet. 179#options NEW_BUFQ_STRATEGY 180 181# 182# Misc. debugging options 183# 184options DDB # Kernel debugger 185#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 186options DIAGNOSTIC # Extra kernel sanity checks 187#options DEBUG # Enable misc. kernel debugging code 188#options SYSCALL_DEBUG # debug all syscalls. 189#options SCSIDEBUG # Add SCSI debugging statements 190#options PANICBUTTON # Forced crash via keypress (?) 191 192# 193# Amiga specific options 194# 195#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 196 # first bank of RAM. (default: unlimited) 197#options NKPTADD=4 # set this for 4 additional KPT pages 198#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 199 # per 16 MB (1<<24 bytes) of RAM 200 # uncomment and decrease this, or uncomment and 201 # increase NKPTADD if you get "out of PT pages" 202 # panics. 203 204# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 205# before the 10 secondinterval ends, or that KBDRESET does work at all. 206#options KBDRESET # sync on Ctrl-Amiga-Amiga 207 208# These options improve performance with the built-in serial port 209# on slower Amigas. Try the larger buffers first then lev6_defer. 210#options SERIBUF_SIZE=4096 211#options SEROBUF_SIZE=32 212#options LEV6_DEFER # defers l6 to l4 (below serial l5) 213 214#options DEVRELOAD # implement /dev/reload 215# # currently only works for a.out kernels 216 217options RETINACONSOLE # enable code to allow retina to be console 218options ULOWELLCONSOLE # enable code to allow a2410 to be console 219options CL5426CONSOLE # Cirrus console 220options CV64CONSOLE # CyberVision console 221options TSENGCONSOLE # Tseng console 222options CV3DCONSOLE # CyberVision 64/3D console 223 224options GRF_ECS # Enhanced Chip Set 225options GRF_NTSC # NTSC 226options GRF_PAL # PAL 227options GRF_A2024 # Support for the A2024 228options GRF_AGA # AGA Chip Set 229options GRF_AGA_VGA # AGA VGAONLY timing 230options GRF_SUPER72 # AGA Super-72 231#options KFONT_8X11 # 8x11 font 232 233# select a font for the console according to the character set and keymap 234# you want to use 235options KFONT_CONS_ISO8859_1 236#options KFONT_CONS_ISO8859_2 237 238# This is how you would tell the kernel the A2410 oscillator frequencies: 239# The used frequencies are the defaults, and do not need option setting 240#options ULOWELL_OSC1=36000000 241#options ULOWELL_OSC2=66667000 242 243# This is how you specify the blitting speed, higher values may speed up blits 244# a littel bit. If you raise this value too much some trash may appear. 245# the commented version is the default. 246#options RH_MEMCLK=61000000 247# this option enables the 64 bit sprite which does not work 248# for quite a few people. E.g. The cursor sprite will turn to a block 249# when moved to the top of the screen in X. 250#options RH_64BIT_SPRITE 251# enables fast scroll code appears to now work on 040 systems. 252#options RETINA_SPEED_HACK 253# enables the Hardwarecursor which does not work on some systems. 254#options RH_HARDWARECURSOR 255 256# wscons aware interface to amiga custom chips. 257# If you enable it enable also wskbd. 258# 259 260#amidisplaycc0 at mainbus0 # wscons interface to custom chips 261#wsdisplay0 at amidisplaycc0 console ? 262#options WSEMUL_VT100 263#options FONT_VT220L8x10 264#options FONT_VT220ISO8x16 265 266grfcc0 at mainbus0 # custom chips 267grfrt0 at zbus0 # retina II 268grfrh0 at zbus0 # retina III 269grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 270grful0 at zbus0 # A2410 271grfcv0 at zbus0 # CyberVision 64 272grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 273grfcv3d0 at zbus0 # CyberVision 64/3D 274 275grf0 at grfcc0 276grf1 at grfrt0 277grf2 at grfrh0 278grf3 at grfcl? 279grf4 at grful0 280grf5 at grfcv0 281grf6 at grfet? 282grf7 at grfcv3d0 283ite0 at grf0 # terminal emulators for grfs 284ite1 at grf1 # terminal emulators for grfs 285ite2 at grf2 # terminal emulators for grfs 286ite3 at grf3 # terminal emulators for grfs 287ite4 at grf4 # terminal emulators for grfs 288ite5 at grf5 # terminal emulators for grfs 289ite6 at grf6 # terminal emulators for grfs 290ite7 at grf7 # terminal emulators for grfs 291 292msc0 at zbus0 # A2232 MSC multiport serial. 293mfc0 at zbus0 # MultiFaceCard I/O board 294mfcs0 at mfc0 unit 0 # MFC serial 295mfcs1 at mfc0 unit 1 # MFC serial 296#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 297#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 298#mfcs2 at mfc1 unit 0 299#mfcs3 at mfc1 unit 1 300#mfcp1 at mfc1 unit 0 301 302hyper* at zbus? # zbus HyperCom3/3+/4/4+ 303#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 304com* at hyper? port ? # Hypercom3/4 serial ports 305lpt* at hyper? port ? # Hypercom3+/4+ parallel port 306 307#options IOBZCLOCK=22118400 # default, uncomment the next line 308#options IOBZCLOCK=24000000 # if needed. 309 310iobl* at zbus? # zbus IOBlix 311com* at iobl? port ? # IOBlix serial ports 312lpt* at iobl? port ? # IOBlix parallel ports 313 314 315# 316# Keyboard device. Optionally can attach a wskbd. 317# wskbd works together with a wsdisplay so enable them both if you will. 318# Don't enable wskbd if you use ite. 319# 320# XXX in std.amiga: kbd0 at mainbus0 321 322#wskbd0 at kbd0 console ? 323 324 325# 326# Amiga Mainboard devices (sans graphics and keyboard) 327# 328 329ser0 at mainbus0 # Amiga onboard serial 330par0 at mainbus0 # Amiga onboard parallel 331ms* at mainbus0 # Amiga mice 332fdc0 at mainbus0 # Amiga FDC 333fd* at fdc0 unit ? # floppy disks on the later 334a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 335a2kbbc0 at mainbus0 # A2000 battery backed clock 336aucc* at mainbus0 # Amiga CC audio 337audio* at aucc? 338 339 340#wsmouse* at ms? 341 342 343# 344# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 345# 346 347# Alas, Melody-Z2 dont configure in the DraCo bus. 348melody* at zbus0 # Melody MPEG audio decoder 349audio* at melody? 350 351repulse* at zbus0 # ALiENDESiGN Repulse 352audio* at repulse? 353 354toccata* at zbus0 # MacroSystem GmbH Toccata 355audio* at toccata? 356 357# Ethernet cards: 358le* at zbus0 # A2065, Ameristar, Ariadne 359ne* at zbus0 # AriadneII, X-surf 360ed* at zbus0 # Hydra, ASDG LanRover 361es* at zbus0 # CEI A4066 EthernetPLUS 362qn* at zbus0 # Quicknet 363 364# Arcnet 365bah* at zbus0 # C=/Ameristar A2060 / 560 366 367# Greater Valley Product Bus 368gvpbus* at zbus0 369 370# scsi stuff, all possible 371gtsc0 at gvpbus? # GVP series II scsi 372scsibus* at gtsc0 373ahsc0 at mainbus0 # A3000 scsi 374scsibus* at ahsc0 375atzsc0 at zbus0 # A2091 scsi 376scsibus* at atzsc0 377wstsc0 at zbus0 # Wordsync II scsi 378scsibus* at wstsc0 379ivsc0 at zbus0 # IVS scsi 380scsibus* at ivsc0 381mlhsc0 at zbus0 # Hacker scsi 382scsibus* at mlhsc0 383otgsc0 at zbus0 # 12 gauge scsi 384scsibus* at otgsc0 385zssc0 at zbus0 # Zeus scsi 386scsibus* at zssc0 387mgnsc0 at zbus0 # Magnum scsi 388scsibus* at mgnsc0 389wesc0 at zbus0 # Warp Engine scsi 390scsibus* at wesc0 391afsc0 at zbus0 # A4091 scsi 392scsibus* at afsc0 393aftsc0 at mainbus0 # A4000T scsi 394scsibus* at aftsc0 395flsc0 at zbus0 # FastlaneZ3 scsi 396scsibus* at flsc0 397bzsc0 at zbus0 # Blizzard 1230 I,II scsi 398scsibus* at bzsc0 399bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 400scsibus* at bzivsc0 401bztzsc0 at zbus0 # Blizzard 2060 scsi 402scsibus* at bztzsc0 403cbsc0 at zbus0 # CyberSCSI I 404scsibus* at cbsc0 405cbiisc0 at zbus0 # CyberSCSI II 406scsibus* at cbiisc0 407cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 408scsibus* at cbiiisc0 409empsc0 at zbus0 # Emplant scsi 410scsibus* at empsc0 411#idesc0 at mainbus0 # A4000 & A1200 IDE 412#scsibus* at idesc0 413 414# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 415# <<< are uncommented >>> 416wdc0 at mainbus0 # A4000 & A1200 IDE bus 417atabus* at wdc? channel ? # ATA bus 418wd* at atabus? drive ? # + drives 419atapibus* at atabus? # ATAPI bus 420cd* at atapibus? drive ? # ATAPI CD-ROM drives 421sd* at atapibus? drive ? # ATAPI disk drives 422 423pccard0 at mainbus0 424pcmcia* at pccard0 425com* at pcmcia? function ? # Modems and serial cards 426pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 427aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 428wdc* at pcmcia? function ? 429awi* at pcmcia? function ? # BayStack 650 (802.11FH) 430ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 431mbe* at pcmcia? function ? # MB8696x based Ethernet 432ne* at pcmcia? function ? # NE2000-compatible Ethernet 433sm* at pcmcia? function ? # Megahertz Ethernet 434mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 435com* at mhzc? 436sm* at mhzc? 437 438 439 440 441# each hard drive from low target to high 442# will configure to the next available sd unit number 443sd* at scsibus? target ? lun ? # scsi disks 444st* at scsibus? target ? lun ? # scsi tapes 445cd* at scsibus? target ? lun ? # scsi cds 446ch* at scsibus? target ? lun ? # scsi autochangers 447ss* at scsibus? target ? lun ? # scsi scanner 448uk* at scsibus? target ? lun ? # scsi unknown 449 450pseudo-device loop # loopback network interface 451pseudo-device sl 1 # SLIP network interfaces 452pseudo-device ppp 1 # PPP network interfaces 453pseudo-device pppoe # PPP over Ethernet (RFC 2516) 454pseudo-device tun 1 # network tunnel line discipline 455#pseudo-device gre 2 # generic L3 over IP tunnel 456pseudo-device bpfilter 16 # Berkeley packet filter 457pseudo-device ipfilter # IP Filter package 458pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 459#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 460#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 461pseudo-device vlan # IEEE 802.1q encapsulation 462pseudo-device bridge # simple inter-network bridging 463#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 464#pseudo-device pf # PF packet filter 465#pseudo-device pflog # PF log if 466 467pseudo-device view 4 # views (needed for grfcc) 468pseudo-device pty # pseudo-terminals 469pseudo-device clockctl # user control of clock subsystem 470 471#pseudo-device wsfont # wsfont(4) dynamic font loading support 472 473pseudo-device vnd 4 # vnode pseudo-disks 474pseudo-device ccd 4 # concatenated disk devices 475#pseudo-device cgd 4 # cryptographic disk devices 476pseudo-device raid 8 # RAIDframe disk driver 477options RAID_AUTOCONFIG # auto-configuration of RAID components 478# Options to enable various other RAIDframe RAID types. 479# options RF_INCLUDE_EVENODD=1 480# options RF_INCLUDE_RAID5_RS=1 481# options RF_INCLUDE_PARITYLOGGING=1 482# options RF_INCLUDE_CHAINDECLUSTER=1 483# options RF_INCLUDE_INTERDECLUSTER=1 484# options RF_INCLUDE_PARITY_DECLUSTERING=1 485# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 486 487pseudo-device rnd # /dev/random and in-kernel generator 488#options RND_COM # use "com" randomness as well (BROKEN) 489 490pseudo-device ksyms # /dev/ksyms (kernel symbols) 491 492config netbsd root on ? type ? 493