AMIGA revision 1.74
1# $NetBSD: AMIGA,v 1.74 2005/02/11 08:25:53 dsl Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.30 2005/01/31 16:54:33 hannken Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.74 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options BB060STUPIDROM # You need this, if you have a non-DraCo 41 # MC68060 with an OS ROM up to (at least) 42 # V40 (OS3.1) and want to boot with the 43 # bootblock. 44 # You do not need this if you have a DraCo, 45 # have no 68060 or NEVER use the bootblock 46options P5PPC68KBOARD # Phase5 PPC/68K board support 47# 48# processors this kernel should support 49# 50options M68060 # support for 060 51options M060SP # MC68060 software support (Required for 060) 52options M68040 # support for 040 53options FPSP # MC68040 floating point support 54options M68030 # support for 030 55options M68020 # support for 020/851 56options FPU_EMULATE # FPU emulation 57 58# 59# Networking options 60# 61options INET # IP networking support (Required) 62options INET6 # IPV6 63#options IPSEC # IP security 64#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65#options IPSEC_DEBUG # debug for IP security 66#options GATEWAY # Packet forwarding 67#options DIRECTED_BROADCAST # Broadcast across subnets 68 69#options MROUTING # Multicast routing 70#options PIM # Protocol Independent Multicast 71options NS # XNS 72#options NSIP # XNS tunneling over IP 73options ISO,TPIP # OSI 74#options EON # OSI tunneling over IP 75options CCITT,LLC,HDLC # X.25 76options NETATALK # AppleTalk networking protocols 77#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 79options PPP_BSDCOMP # BSD-Compress compression support for PPP 80options PPP_DEFLATE # Deflate compression support for PPP 81options PPP_FILTER # Active filter support for PPP (requires bpf) 82options PFIL_HOOKS # pfil(9) packet filter hooks 83options IPFILTER_LOG # ipmon(8) log support 84#options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86#options ALTQ # Manipulate network interfaces' output queues 87#options ALTQ_BLUE # Stochastic Fair Blue 88#options ALTQ_CBQ # Class-Based Queueing 89#options ALTQ_CDNR # Diffserv Traffic Conditioner 90#options ALTQ_FIFOQ # First-In First-Out Queue 91#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 92#options ALTQ_HFSC # Hierarchical Fair Service Curve 93#options ALTQ_LOCALQ # Local queueing discipline 94#options ALTQ_PRIQ # Priority Queueing 95#options ALTQ_RED # Random Early Detection 96#options ALTQ_RIO # RED with IN/OUT 97#options ALTQ_WFQ # Weighted Fair Queueing 98 99# Filesystems 100file-system FFS # Berkeley fast file system 101file-system EXT2FS # second extended file system (linux) 102#file-system LFS # log-structured filesystem (experimental) 103 104file-system MFS # Memory based filesystem 105 106file-system NFS # Network File System client side code 107file-system ADOSFS # AmigaDOS file system 108file-system CD9660 # ISO 9660 + Rock Ridge filesystem 109file-system MSDOSFS # MS-DOS filesystem 110 111file-system KERNFS # kernel data-structure filesystem 112 113file-system FDESC # user file descriptor filesystem 114file-system NULLFS # loopback filesystem 115file-system OVERLAY # overlay filesystem 116#file-system PORTAL # Portal filesystem 117file-system PROCFS # /proc filesystem 118file-system UMAPFS # NULLFS + uid and gid remapping 119file-system UNION # union filesystem 120 121# Filesystem options 122 123#options FFS_EI # FFS Endian Independant support 124 125options QUOTA # User and group quotas in FFS 126options SOFTDEP # FFS soft updates support. 127#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 128options NFSSERVER # Network File System server side code 129 130#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 131 # immutable) behave as system flags. 132options FFS_SNAPSHOT # ffs snapshots 133 134# 135# Compatibility options for various existing systems 136# 137 138#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 139options COMPAT_43 # compatibility with 4.3BSD interfaces 140options COMPAT_09 # compatibility with NetBSD 0.9 141options COMPAT_10 # compatibility with NetBSD 1.0 142options COMPAT_12 # compatibility with NetBSD 1.2 143options COMPAT_13 # compatibility with NetBSD 1.3 144options COMPAT_14 # compatibility with NetBSD 1.4 145options COMPAT_15 # compatibility with NetBSD 1.5 146options COMPAT_16 # compatibility with NetBSD 1.6 147options COMPAT_SUNOS # Support to run Sun (m68k) executables 148options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 149options COMPAT_NOMID # allow nonvalid machine id executables 150#options COMPAT_LINUX # Support to run Linux/m68k executables 151 152options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 153options COMPAT_AOUT_M68K # actually make some system calls work. 154options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 155 156# 157# Support for System V IPC facilities. 158# 159options SYSVSHM # System V-like shared memory 160options SYSVMSG # System V-like messages 161options SYSVSEM # System V-like semaphores 162#options SEMMNI=10 # number of semaphore identifiers 163#options SEMMNS=60 # number of semaphores in system 164#options SEMUME=10 # max number of undo entries per process 165#options SEMMNU=30 # number of undo structures in system 166options P1003_1B_SEMAPHORE # p1003.1b semaphore support 167 168# 169# Support for various kernel options 170# 171 172options KTRACE # system call tracing support 173options SYSTRACE # system call vetting via systrace(1) 174options LKM # Loadable kernel modules 175#options INSECURE # disable kernel security levels 176options SCSIVERBOSE # human readable SCSI error messages 177options USERCONF # userconf(4) support 178options NTP # NTP phase/frequency locked loop 179#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 180 181# Enable experimental buffer queue strategy for better responsiveness under 182# high disk I/O load. Use it with caution - it's not proven to be stable yet. 183#options NEW_BUFQ_STRATEGY 184 185# 186# Misc. debugging options 187# 188options DDB # Kernel debugger 189#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 190options DIAGNOSTIC # Extra kernel sanity checks 191#options DEBUG # Enable misc. kernel debugging code 192#options SYSCALL_DEBUG # debug all syscalls. 193#options SCSIDEBUG # Add SCSI debugging statements 194#options PANICBUTTON # Forced crash via keypress (?) 195 196# 197# Amiga specific options 198# 199#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 200 # first bank of RAM. (default: unlimited) 201#options NKPTADD=4 # set this for 4 additional KPT pages 202#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 203 # per 16 MB (1<<24 bytes) of RAM 204 # uncomment and decrease this, or uncomment and 205 # increase NKPTADD if you get "out of PT pages" 206 # panics. 207 208# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 209# before the 10 secondinterval ends, or that KBDRESET does work at all. 210#options KBDRESET # sync on Ctrl-Amiga-Amiga 211 212# These options improve performance with the built-in serial port 213# on slower Amigas. Try the larger buffers first then lev6_defer. 214#options SERIBUF_SIZE=4096 215#options SEROBUF_SIZE=32 216#options LEV6_DEFER # defers l6 to l4 (below serial l5) 217 218#options DEVRELOAD # implement /dev/reload 219# # currently only works for a.out kernels 220 221options RETINACONSOLE # enable code to allow retina to be console 222options ULOWELLCONSOLE # enable code to allow a2410 to be console 223options CL5426CONSOLE # Cirrus console 224options CV64CONSOLE # CyberVision console 225options TSENGCONSOLE # Tseng console 226options CV3DCONSOLE # CyberVision 64/3D console 227 228options GRF_ECS # Enhanced Chip Set 229options GRF_NTSC # NTSC 230options GRF_PAL # PAL 231options GRF_A2024 # Support for the A2024 232options GRF_AGA # AGA Chip Set 233options GRF_AGA_VGA # AGA VGAONLY timing 234options GRF_SUPER72 # AGA Super-72 235#options KFONT_8X11 # 8x11 font 236 237# select a font for the console according to the character set and keymap 238# you want to use 239options KFONT_CONS_ISO8859_1 240#options KFONT_CONS_ISO8859_2 241 242# This is how you would tell the kernel the A2410 oscillator frequencies: 243# The used frequencies are the defaults, and do not need option setting 244#options ULOWELL_OSC1=36000000 245#options ULOWELL_OSC2=66667000 246 247# This is how you specify the blitting speed, higher values may speed up blits 248# a littel bit. If you raise this value too much some trash may appear. 249# the commented version is the default. 250#options RH_MEMCLK=61000000 251# this option enables the 64 bit sprite which does not work 252# for quite a few people. E.g. The cursor sprite will turn to a block 253# when moved to the top of the screen in X. 254#options RH_64BIT_SPRITE 255# enables fast scroll code appears to now work on 040 systems. 256#options RETINA_SPEED_HACK 257# enables the Hardwarecursor which does not work on some systems. 258#options RH_HARDWARECURSOR 259 260# wscons aware interface to amiga custom chips. 261# If you enable it enable also wskbd. 262# 263 264#amidisplaycc0 at mainbus0 # wscons interface to custom chips 265#wsdisplay0 at amidisplaycc0 console ? 266#options WSEMUL_VT100 267#options FONT_VT220L8x10 268#options FONT_VT220ISO8x16 269 270grfcc0 at mainbus0 # custom chips 271grfrt0 at zbus0 # retina II 272grfrh0 at zbus0 # retina III 273grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 274grful0 at zbus0 # A2410 275grfcv0 at zbus0 # CyberVision 64 276grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 277grfcv3d0 at zbus0 # CyberVision 64/3D 278 279grf0 at grfcc0 280grf1 at grfrt0 281grf2 at grfrh0 282grf3 at grfcl? 283grf4 at grful0 284grf5 at grfcv0 285grf6 at grfet? 286grf7 at grfcv3d0 287ite0 at grf0 # terminal emulators for grfs 288ite1 at grf1 # terminal emulators for grfs 289ite2 at grf2 # terminal emulators for grfs 290ite3 at grf3 # terminal emulators for grfs 291ite4 at grf4 # terminal emulators for grfs 292ite5 at grf5 # terminal emulators for grfs 293ite6 at grf6 # terminal emulators for grfs 294ite7 at grf7 # terminal emulators for grfs 295 296msc0 at zbus0 # A2232 MSC multiport serial. 297mfc0 at zbus0 # MultiFaceCard I/O board 298mfcs0 at mfc0 unit 0 # MFC serial 299mfcs1 at mfc0 unit 1 # MFC serial 300#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 301#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 302#mfcs2 at mfc1 unit 0 303#mfcs3 at mfc1 unit 1 304#mfcp1 at mfc1 unit 0 305 306hyper* at zbus? # zbus HyperCom3/3+/4/4+ 307#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 308com* at hyper? port ? # Hypercom3/4 serial ports 309lpt* at hyper? port ? # Hypercom3+/4+ parallel port 310 311#options IOBZCLOCK=22118400 # default, uncomment the next line 312#options IOBZCLOCK=24000000 # if needed. 313 314iobl* at zbus? # zbus IOBlix 315com* at iobl? port ? # IOBlix serial ports 316lpt* at iobl? port ? # IOBlix parallel ports 317 318 319# 320# Keyboard device. Optionally can attach a wskbd. 321# wskbd works together with a wsdisplay so enable them both if you will. 322# Don't enable wskbd if you use ite. 323# 324# XXX in std.amiga: kbd0 at mainbus0 325 326#wskbd0 at kbd0 console ? 327 328 329# 330# Amiga Mainboard devices (sans graphics and keyboard) 331# 332 333ser0 at mainbus0 # Amiga onboard serial 334par0 at mainbus0 # Amiga onboard parallel 335ms* at mainbus0 # Amiga mice 336fdc0 at mainbus0 # Amiga FDC 337fd* at fdc0 unit ? # floppy disks on the later 338a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 339a2kbbc0 at mainbus0 # A2000 battery backed clock 340aucc* at mainbus0 # Amiga CC audio 341audio* at aucc? 342 343 344#wsmouse* at ms? 345 346 347# 348# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 349# 350 351# Alas, Melody-Z2 dont configure in the DraCo bus. 352melody* at zbus0 # Melody MPEG audio decoder 353audio* at melody? 354 355repulse* at zbus0 # ALiENDESiGN Repulse 356audio* at repulse? 357 358toccata* at zbus0 # MacroSystem GmbH Toccata 359audio* at toccata? 360 361# Ethernet cards: 362le* at zbus0 # A2065, Ameristar, Ariadne 363ne* at zbus0 # AriadneII, X-surf 364ed* at zbus0 # Hydra, ASDG LanRover 365es* at zbus0 # CEI A4066 EthernetPLUS 366qn* at zbus0 # Quicknet 367 368# Arcnet 369bah* at zbus0 # C=/Ameristar A2060 / 560 370 371# Greater Valley Product Bus 372gvpbus* at zbus0 373 374# scsi stuff, all possible 375gtsc0 at gvpbus? # GVP series II scsi 376scsibus* at gtsc0 377ahsc0 at mainbus0 # A3000 scsi 378scsibus* at ahsc0 379atzsc0 at zbus0 # A2091 scsi 380scsibus* at atzsc0 381wstsc0 at zbus0 # Wordsync II scsi 382scsibus* at wstsc0 383ivsc0 at zbus0 # IVS scsi 384scsibus* at ivsc0 385mlhsc0 at zbus0 # Hacker scsi 386scsibus* at mlhsc0 387otgsc0 at zbus0 # 12 gauge scsi 388scsibus* at otgsc0 389zssc0 at zbus0 # Zeus scsi 390scsibus* at zssc0 391mgnsc0 at zbus0 # Magnum scsi 392scsibus* at mgnsc0 393wesc0 at zbus0 # Warp Engine scsi 394scsibus* at wesc0 395afsc0 at zbus0 # A4091 scsi 396scsibus* at afsc0 397aftsc0 at mainbus0 # A4000T scsi 398scsibus* at aftsc0 399flsc0 at zbus0 # FastlaneZ3 scsi 400scsibus* at flsc0 401bzsc0 at zbus0 # Blizzard 1230 I,II scsi 402scsibus* at bzsc0 403bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 404scsibus* at bzivsc0 405bztzsc0 at zbus0 # Blizzard 2060 scsi 406scsibus* at bztzsc0 407cbsc0 at zbus0 # CyberSCSI I 408scsibus* at cbsc0 409cbiisc0 at zbus0 # CyberSCSI II 410scsibus* at cbiisc0 411cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 412scsibus* at cbiiisc0 413empsc0 at zbus0 # Emplant scsi 414scsibus* at empsc0 415 416wdc0 at mainbus0 # A4000 & A1200 IDE bus 417atabus* at wdc? channel ? # ATA bus 418wd* at atabus? drive ? # + drives 419atapibus* at atabus? # ATAPI bus 420cd* at atapibus? drive ? # ATAPI CD-ROM drives 421sd* at atapibus? drive ? # ATAPI disk drives 422 423pccard0 at mainbus0 424pcmcia* at pccard0 425com* at pcmcia? function ? # Modems and serial cards 426pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 427aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 428wdc* at pcmcia? function ? 429awi* at pcmcia? function ? # BayStack 650 (802.11FH) 430ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 431mbe* at pcmcia? function ? # MB8696x based Ethernet 432ne* at pcmcia? function ? # NE2000-compatible Ethernet 433sm* at pcmcia? function ? # Megahertz Ethernet 434mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 435com* at mhzc? 436sm* at mhzc? 437 438 439 440 441# each hard drive from low target to high 442# will configure to the next available sd unit number 443sd* at scsibus? target ? lun ? # scsi disks 444st* at scsibus? target ? lun ? # scsi tapes 445cd* at scsibus? target ? lun ? # scsi cds 446ch* at scsibus? target ? lun ? # scsi autochangers 447ss* at scsibus? target ? lun ? # scsi scanner 448uk* at scsibus? target ? lun ? # scsi unknown 449 450pseudo-device loop # loopback network interface 451pseudo-device sl 1 # SLIP network interfaces 452pseudo-device ppp 1 # PPP network interfaces 453pseudo-device pppoe # PPP over Ethernet (RFC 2516) 454pseudo-device tun 1 # network tunnel line discipline 455pseudo-device tap # virtual Ethernet 456#pseudo-device gre 2 # generic L3 over IP tunnel 457pseudo-device bpfilter 16 # Berkeley packet filter 458pseudo-device ipfilter # IP Filter package 459pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 460#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 461#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 462pseudo-device vlan # IEEE 802.1q encapsulation 463pseudo-device bridge # simple inter-network bridging 464#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 465#pseudo-device pf # PF packet filter 466#pseudo-device pflog # PF log if 467#pseudo-device fss 4 # file system snapshot device 468 469pseudo-device view 4 # views (needed for grfcc) 470pseudo-device pty # pseudo-terminals 471pseudo-device clockctl # user control of clock subsystem 472 473#pseudo-device wsfont # wsfont(4) dynamic font loading support 474 475pseudo-device vnd 4 # vnode pseudo-disks 476pseudo-device ccd 4 # concatenated disk devices 477#pseudo-device cgd 4 # cryptographic disk devices 478pseudo-device raid 8 # RAIDframe disk driver 479options RAID_AUTOCONFIG # auto-configuration of RAID components 480# Options to enable various other RAIDframe RAID types. 481# options RF_INCLUDE_EVENODD=1 482# options RF_INCLUDE_RAID5_RS=1 483# options RF_INCLUDE_PARITYLOGGING=1 484# options RF_INCLUDE_CHAINDECLUSTER=1 485# options RF_INCLUDE_INTERDECLUSTER=1 486# options RF_INCLUDE_PARITY_DECLUSTERING=1 487# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 488 489pseudo-device rnd # /dev/random and in-kernel generator 490#options RND_COM # use "com" randomness as well (BROKEN) 491 492pseudo-device ksyms # /dev/ksyms (kernel symbols) 493 494config netbsd root on ? type ? 495