AMIGA revision 1.76       1 # $NetBSD: AMIGA,v 1.76 2005/02/20 17:57:39 jdolecek Exp $
      2 #
      3 # This file was automatically created.
      4 # Changes will be lost when make is run in this directory.
      5 #
      6 # Created from: # NetBSD: GENERIC.in,v 1.33 2005/02/20 17:57:02 jdolecek Exp $
      7 #
      8 # GENERIC machine description file
      9 #
     10 # This machine description file is used to generate the default NetBSD
     11 # kernel.  The generic kernel does not include all options, subsystems
     12 # and device drivers, but should be useful for most applications.
     13 #
     14 # The machine description file can be customised for your specific
     15 # machine to reduce the kernel size and improve its performance.
     16 #
     17 # For further information on compiling NetBSD kernels, see the config(8)
     18 # man page.
     19 #
     20 # For further information on hardware support for this architecture, see
     21 # the intro(4) man page.  For further information about kernel options
     22 # for this architecture, see the options(4) man page.  For an explanation
     23 # of each device driver in this file see the section 4 man page for the
     24 # device.
     25 
     26 
     27 include "arch/amiga/conf/std.amiga"
     28 
     29 options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     30 
     31 #ident 		"GENERIC-$Revision: 1.76 $"
     32 
     33 
     34 maxusers	8
     35 options 	RTC_OFFSET=0
     36 
     37 #
     38 # mainboards to support (in addition to Amiga)
     39 #
     40 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     41 				# MC68060 with an OS ROM up to (at least)
     42 				# V40 (OS3.1) and want to boot with the
     43 				# bootblock.
     44 				# You do not need this if you have a DraCo,
     45 				# have no 68060 or NEVER use the bootblock
     46 options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
     47 #
     48 # processors this kernel should support
     49 #
     50 options 	M68060		# support for 060
     51 options 	M060SP		# MC68060 software support (Required for 060)
     52 options 	M68040		# support for 040
     53 options 	FPSP		# MC68040 floating point support
     54 options 	M68030		# support for 030
     55 options 	M68020		# support for 020/851
     56 options 	FPU_EMULATE	# FPU emulation
     57 
     58 #
     59 # Networking options
     60 #
     61 options 	INET		# IP networking support (Required)
     62 options 	INET6		# IPV6
     63 #options 	IPSEC		# IP security
     64 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     65 #options 	IPSEC_DEBUG	# debug for IP security
     66 #options 	GATEWAY		# Packet forwarding
     67 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     68 
     69 #options 	MROUTING	# Multicast routing
     70 #options 	PIM		# Protocol Independent Multicast
     71 options 	NS		# XNS
     72 #options 	NSIP		# XNS tunneling over IP
     73 options 	ISO,TPIP	# OSI
     74 #options 	EON		# OSI tunneling over IP
     75 options 	CCITT,LLC,HDLC	# X.25
     76 options 	NETATALK	# AppleTalk networking protocols
     77 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
     78 
     79 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     80 options 	PPP_DEFLATE	# Deflate compression support for PPP
     81 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     82 options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     83 options 	IPFILTER_LOG	# ipmon(8) log support
     84 #options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
     85 
     86 #options 	ALTQ		# Manipulate network interfaces' output queues
     87 #options 	ALTQ_BLUE	# Stochastic Fair Blue
     88 #options 	ALTQ_CBQ	# Class-Based Queueing
     89 #options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
     90 #options 	ALTQ_FIFOQ	# First-In First-Out Queue
     91 #options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
     92 #options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
     93 #options 	ALTQ_LOCALQ	# Local queueing discipline
     94 #options 	ALTQ_PRIQ	# Priority Queueing
     95 #options 	ALTQ_RED	# Random Early Detection
     96 #options 	ALTQ_RIO	# RED with IN/OUT
     97 #options 	ALTQ_WFQ	# Weighted Fair Queueing
     98 
     99 # Filesystems
    100 file-system 	FFS		# Berkeley fast file system
    101 file-system 	EXT2FS		# second extended file system (linux)
    102 #file-system 	LFS		# log-structured filesystem (experimental)
    103 
    104 file-system 	MFS		# Memory based filesystem
    105 
    106 file-system 	NFS		# Network File System client side code
    107 file-system 	ADOSFS		# AmigaDOS file system
    108 file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
    109 file-system 	MSDOSFS		# MS-DOS filesystem
    110 
    111 file-system 	KERNFS		# kernel data-structure filesystem
    112 
    113 file-system 	FDESC		# user file descriptor filesystem
    114 file-system 	NULLFS		# loopback filesystem
    115 file-system 	OVERLAY		# overlay filesystem
    116 #file-system 	PORTAL		# Portal filesystem
    117 file-system 	PROCFS		# /proc filesystem
    118 file-system 	UMAPFS		# NULLFS + uid and gid remapping
    119 file-system 	UNION		# union filesystem
    120 file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)
    121 
    122 # Filesystem options
    123 
    124 #options 	FFS_EI		# FFS Endian Independant support
    125 
    126 options 	QUOTA		# User and group quotas in FFS
    127 options 	SOFTDEP		# FFS soft updates support.
    128 #options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
    129 options 	NFSSERVER	# Network File System server side code
    130 #options 	FFS_NO_SNAPSHOT	# ffs snapshots
    131 
    132 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    133 				# immutable) behave as system flags.
    134 
    135 #
    136 # Compatibility options for various existing systems
    137 #
    138 
    139 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
    140 options 	COMPAT_43	# compatibility with 4.3BSD interfaces
    141 options 	COMPAT_09	# compatibility with NetBSD 0.9
    142 options 	COMPAT_10	# compatibility with NetBSD 1.0
    143 options 	COMPAT_12	# compatibility with NetBSD 1.2
    144 options 	COMPAT_13	# compatibility with NetBSD 1.3
    145 options 	COMPAT_14	# compatibility with NetBSD 1.4
    146 options 	COMPAT_15	# compatibility with NetBSD 1.5
    147 options 	COMPAT_16	# compatibility with NetBSD 1.6
    148 options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
    149 options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
    150 options 	COMPAT_NOMID	# allow nonvalid machine id executables
    151 #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
    152 
    153 options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
    154 options 	COMPAT_AOUT_M68K # actually make some system calls work.
    155 options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
    156 
    157 #
    158 # Support for System V IPC facilities.
    159 #
    160 options 	SYSVSHM		# System V-like shared memory
    161 options 	SYSVMSG		# System V-like messages
    162 options 	SYSVSEM		# System V-like semaphores
    163 #options 	SEMMNI=10	# number of semaphore identifiers
    164 #options 	SEMMNS=60	# number of semaphores in system
    165 #options 	SEMUME=10	# max number of undo entries per process
    166 #options 	SEMMNU=30	# number of undo structures in system
    167 options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
    168 
    169 #
    170 # Support for various kernel options
    171 #
    172 
    173 options 	KTRACE		# system call tracing support
    174 options 	SYSTRACE	# system call vetting via systrace(1)
    175 options 	LKM		# Loadable kernel modules
    176 #options 	INSECURE	# disable kernel security levels
    177 options 	SCSIVERBOSE	# human readable SCSI error messages
    178 options 	USERCONF	# userconf(4) support
    179 options 	NTP		# NTP phase/frequency locked loop
    180 #options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
    181 
    182 # Enable experimental buffer queue strategy for better responsiveness under 
    183 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
    184 #options 	NEW_BUFQ_STRATEGY
    185 
    186 #
    187 # Misc. debugging options
    188 #
    189 options 	DDB		# Kernel debugger
    190 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    191 options 	DIAGNOSTIC	# Extra kernel sanity checks
    192 #options 	DEBUG		# Enable misc. kernel debugging code
    193 #options 	SYSCALL_DEBUG	# debug all syscalls.
    194 #options 	SCSIDEBUG	# Add SCSI debugging statements
    195 #options 	PANICBUTTON	# Forced crash via keypress (?)
    196 
    197 #
    198 # Amiga specific options
    199 #
    200 #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    201 				# first bank of RAM. (default: unlimited)
    202 #options 	NKPTADD=4	# set this for 4 additional KPT pages
    203 #options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    204 				# per 16 MB (1<<24 bytes) of RAM
    205 				# uncomment and decrease this, or uncomment and
    206 				# increase NKPTADD if you get "out of PT pages"
    207 				# panics.
    208 
    209 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    210 # before the 10 secondinterval ends, or that KBDRESET does work at all.
    211 #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    212 
    213 # These options improve performance with the built-in serial port
    214 # on slower Amigas.  Try the larger buffers first then lev6_defer.
    215 #options 	SERIBUF_SIZE=4096
    216 #options 	SEROBUF_SIZE=32
    217 #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    218 
    219 #options	DEVRELOAD	# implement /dev/reload
    220 #				# currently only works for a.out kernels
    221 
    222 options 	RETINACONSOLE	# enable code to allow retina to be console
    223 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    224 options 	CL5426CONSOLE	# Cirrus console
    225 options 	CV64CONSOLE	# CyberVision console
    226 options 	TSENGCONSOLE	# Tseng console
    227 options 	CV3DCONSOLE	# CyberVision 64/3D console
    228 
    229 options 	GRF_ECS		# Enhanced Chip Set
    230 options 	GRF_NTSC	# NTSC
    231 options 	GRF_PAL		# PAL
    232 options 	GRF_A2024	# Support for the A2024
    233 options 	GRF_AGA		# AGA Chip Set
    234 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    235 options 	GRF_SUPER72	# AGA Super-72
    236 #options 	KFONT_8X11	# 8x11 font
    237 
    238 # select a font for the console according to the character set and keymap
    239 # you want to use
    240 options        KFONT_CONS_ISO8859_1
    241 #options         KFONT_CONS_ISO8859_2
    242 
    243 # This is how you would tell the kernel the A2410 oscillator frequencies:
    244 # The used frequencies are the defaults, and do not need option setting
    245 #options 	ULOWELL_OSC1=36000000
    246 #options 	ULOWELL_OSC2=66667000
    247 
    248 # This is how you specify the blitting speed, higher values may speed up blits
    249 # a littel bit.  If you raise this value too much some trash may appear.
    250 # the commented version is the default.
    251 #options 	RH_MEMCLK=61000000
    252 # this option enables the 64 bit sprite which does not work
    253 # for quite a few people.  E.g. The cursor sprite will turn to a block
    254 # when moved to the top of the screen in X.
    255 #options 	RH_64BIT_SPRITE
    256 # enables fast scroll code appears to now work on 040 systems.
    257 #options 	RETINA_SPEED_HACK
    258 # enables the Hardwarecursor which does not work on some systems.
    259 #options 	RH_HARDWARECURSOR
    260 
    261 # wscons aware interface to amiga custom chips.
    262 # If you enable it enable also wskbd.
    263 #
    264 
    265 #amidisplaycc0	at mainbus0		# wscons interface to custom chips
    266 #wsdisplay0	at amidisplaycc0 console ?
    267 #options 	WSEMUL_VT100
    268 #options 	FONT_VT220L8x10
    269 #options	FONT_VT220ISO8x16
    270 
    271 grfcc0		at mainbus0		# custom chips
    272 grfrt0		at zbus0		# retina II
    273 grfrh0		at zbus0		# retina III
    274 grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
    275 grful0		at zbus0		# A2410
    276 grfcv0		at zbus0		# CyberVision 64
    277 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    278 grfcv3d0	at zbus0		# CyberVision 64/3D
    279 
    280 grf0		at grfcc0
    281 grf1		at grfrt0
    282 grf2		at grfrh0
    283 grf3		at grfcl?
    284 grf4		at grful0
    285 grf5		at grfcv0
    286 grf6		at grfet?
    287 grf7		at grfcv3d0
    288 ite0		at grf0			# terminal emulators for grfs
    289 ite1		at grf1			# terminal emulators for grfs
    290 ite2		at grf2			# terminal emulators for grfs
    291 ite3		at grf3			# terminal emulators for grfs
    292 ite4		at grf4			# terminal emulators for grfs
    293 ite5		at grf5			# terminal emulators for grfs
    294 ite6		at grf6			# terminal emulators for grfs
    295 ite7		at grf7			# terminal emulators for grfs
    296 
    297 msc0		at zbus0		# A2232 MSC multiport serial.
    298 mfc0		at zbus0		# MultiFaceCard I/O board
    299 mfcs0		at mfc0 unit 0		# MFC serial
    300 mfcs1		at mfc0 unit 1		# MFC serial
    301 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    302 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    303 #mfcs2		at mfc1 unit 0
    304 #mfcs3		at mfc1 unit 1
    305 #mfcp1		at mfc1 unit 0
    306 
    307 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    308 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    309 com*		at hyper? port ?	# Hypercom3/4 serial ports
    310 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    311 
    312 #options 	IOBZCLOCK=22118400 	# default, uncomment the next line
    313 #options 	IOBZCLOCK=24000000	# if needed.
    314 
    315 iobl*		at zbus?		# zbus IOBlix
    316 com*		at iobl? port ?		# IOBlix serial ports
    317 lpt*		at iobl? port ?		# IOBlix parallel ports
    318 
    319 
    320 #
    321 # Keyboard device. Optionally can attach a wskbd.
    322 # wskbd works together with a wsdisplay so enable them both if you will.
    323 # Don't enable wskbd if you use ite.
    324 #
    325 # XXX in std.amiga: kbd0 at mainbus0
    326 
    327 #wskbd0		at kbd0 console ?
    328 
    329 
    330 #
    331 # Amiga Mainboard devices (sans graphics and keyboard)
    332 #
    333 
    334 ser0		at mainbus0		# Amiga onboard serial
    335 par0		at mainbus0		# Amiga onboard parallel
    336 ms*		at mainbus0		# Amiga mice
    337 fdc0		at mainbus0		# Amiga FDC
    338 fd*		at fdc0 unit ?		# floppy disks on the later
    339 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    340 a2kbbc0 	at mainbus0		# A2000 battery backed clock
    341 aucc*		at mainbus0		# Amiga CC audio
    342 audio*		at aucc?
    343 
    344 
    345 #wsmouse*	at ms?
    346 
    347 
    348 #
    349 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    350 #
    351 
    352 # Alas, Melody-Z2 dont configure in the DraCo bus.
    353 melody* 	at zbus0		# Melody MPEG audio decoder
    354 audio*		at melody?
    355 
    356 repulse*	at zbus0		# ALiENDESiGN Repulse
    357 audio*		at repulse?
    358 
    359 toccata*	at zbus0		# MacroSystem GmbH Toccata
    360 audio*		at toccata?
    361 
    362 # Ethernet cards:
    363 le*		at zbus0		# A2065, Ameristar, Ariadne
    364 ne*		at zbus0		# AriadneII, X-surf
    365 ed*		at zbus0		# Hydra, ASDG LanRover
    366 es*		at zbus0		# CEI A4066 EthernetPLUS
    367 qn*		at zbus0		# Quicknet
    368 
    369 # Arcnet
    370 bah*		at zbus0		# C=/Ameristar A2060 / 560
    371 
    372 # Greater Valley Product Bus
    373 gvpbus* 	at zbus0
    374 
    375 # scsi stuff, all possible
    376 gtsc0		at gvpbus?		# GVP series II scsi
    377 scsibus*	at gtsc0
    378 ahsc0		at mainbus0		# A3000 scsi
    379 scsibus*	at ahsc0
    380 atzsc0		at zbus0		# A2091 scsi
    381 scsibus*	at atzsc0
    382 wstsc0		at zbus0		# Wordsync II scsi
    383 scsibus*	at wstsc0
    384 ivsc0		at zbus0		# IVS scsi
    385 scsibus*	at ivsc0
    386 mlhsc0		at zbus0		# Hacker scsi
    387 scsibus*	at mlhsc0
    388 otgsc0		at zbus0		# 12 gauge scsi
    389 scsibus*	at otgsc0
    390 zssc0		at zbus0		# Zeus scsi
    391 scsibus*	at zssc0
    392 mgnsc0		at zbus0		# Magnum scsi
    393 scsibus*	at mgnsc0
    394 wesc0		at zbus0		# Warp Engine scsi
    395 scsibus*	at wesc0
    396 afsc0		at zbus0		# A4091 scsi
    397 scsibus*	at afsc0
    398 aftsc0		at mainbus0		# A4000T scsi
    399 scsibus*	at aftsc0
    400 flsc0		at zbus0		# FastlaneZ3 scsi
    401 scsibus*	at flsc0
    402 bzsc0		at zbus0		# Blizzard 1230 I,II scsi
    403 scsibus*	at bzsc0
    404 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
    405 scsibus*	at bzivsc0
    406 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    407 scsibus*	at bztzsc0
    408 cbsc0		at zbus0		# CyberSCSI I
    409 scsibus*	at cbsc0
    410 cbiisc0 	at zbus0		# CyberSCSI II
    411 scsibus*	at cbiisc0
    412 cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    413 scsibus*	at cbiiisc0
    414 empsc0		at zbus0		# Emplant scsi
    415 scsibus*	at empsc0
    416 
    417 wdc0		at mainbus0		# A4000 & A1200 IDE bus
    418 atabus* 	at wdc? channel ?	# ATA bus
    419 wd*		at atabus? drive ?	#  + drives
    420 atapibus*	at atabus?		# ATAPI bus
    421 cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    422 sd*		at atapibus? drive ?	# ATAPI disk drives
    423 
    424 pccard0		at mainbus0
    425 pcmcia*		at pccard0
    426 com*		at pcmcia? function ?		# Modems and serial cards
    427 pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
    428 aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
    429 wdc*		at pcmcia? function ?
    430 awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
    431 ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    432 mbe*		at pcmcia? function ?		# MB8696x based Ethernet
    433 ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
    434 sm*		at pcmcia? function ?		# Megahertz Ethernet
    435 mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
    436 com*		at mhzc?
    437 sm*		at mhzc?
    438 
    439 
    440 
    441 
    442 # each hard drive from low target to high
    443 # will configure to the next available sd unit number
    444 sd*	at scsibus? target ? lun ?	# scsi disks
    445 st*	at scsibus? target ? lun ?	# scsi tapes
    446 cd*	at scsibus? target ? lun ?	# scsi cds
    447 ch*	at scsibus? target ? lun ?	# scsi autochangers
    448 ss*	at scsibus? target ? lun ?	# scsi scanner
    449 uk*	at scsibus? target ? lun ?	# scsi unknown
    450 
    451 pseudo-device	loop			# loopback network interface
    452 pseudo-device	sl		1	# SLIP network interfaces
    453 pseudo-device	ppp		1	# PPP network interfaces
    454 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    455 pseudo-device	tun		1	# network tunnel line discipline
    456 pseudo-device	tap			# virtual Ethernet
    457 #pseudo-device	gre		2	# generic L3 over IP tunnel
    458 pseudo-device	bpfilter	16	# Berkeley packet filter
    459 pseudo-device	ipfilter		# IP Filter package
    460 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    461 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    462 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    463 pseudo-device	vlan			# IEEE 802.1q encapsulation
    464 pseudo-device	bridge			# simple inter-network bridging
    465 #options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
    466 #pseudo-device	pf			# PF packet filter
    467 #pseudo-device	pflog			# PF log if
    468 #pseudo-device	fss		4	# file system snapshot device
    469 
    470 pseudo-device	view		4	# views (needed for grfcc)
    471 pseudo-device	pty			# pseudo-terminals
    472 pseudo-device	clockctl		# user control of clock subsystem
    473 
    474 #pseudo-device	wsfont			# wsfont(4) dynamic font loading support
    475 
    476 pseudo-device	vnd		4	# vnode pseudo-disks
    477 pseudo-device	ccd		4	# concatenated disk devices
    478 #pseudo-device	cgd		4	# cryptographic disk devices
    479 pseudo-device	raid		8	# RAIDframe disk driver
    480 options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    481 # Options to enable various other RAIDframe RAID types.
    482 # options 	RF_INCLUDE_EVENODD=1
    483 # options 	RF_INCLUDE_RAID5_RS=1
    484 # options 	RF_INCLUDE_PARITYLOGGING=1
    485 # options 	RF_INCLUDE_CHAINDECLUSTER=1
    486 # options 	RF_INCLUDE_INTERDECLUSTER=1
    487 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    488 # options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    489 
    490 pseudo-device	rnd			# /dev/random and in-kernel generator
    491 #options 	RND_COM			# use "com" randomness as well (BROKEN)
    492 
    493 pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
    494 pseudo-device	nsmb			# experimental - SMB requester
    495 
    496 config	netbsd root on ? type ?
    497