AMIGA revision 1.93
1 # $NetBSD: AMIGA,v 1.93 2006/02/03 00:41:26 reinoud Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.49 2006/02/03 00:40:16 reinoud Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.93 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options BB060STUPIDROM # You need this, if you have a non-DraCo 41 # MC68060 with an OS ROM up to (at least) 42 # V40 (OS3.1) and want to boot with the 43 # bootblock. 44 # You do not need this if you have a DraCo, 45 # have no 68060 or NEVER use the bootblock 46 options P5PPC68KBOARD # Phase5 PPC/68K board support 47 # 48 # processors this kernel should support 49 # 50 options M68060 # support for 060 51 options M060SP # MC68060 software support (Required for 060) 52 options M68040 # support for 040 53 options FPSP # MC68040 floating point support 54 options M68030 # support for 030 55 options M68020 # support for 020/851 56 options FPU_EMULATE # FPU emulation 57 58 # 59 # Networking options 60 # 61 options INET # IP networking support (Required) 62 options INET6 # IPV6 63 #options IPSEC # IP security 64 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 66 #options IPSEC_DEBUG # debug for IP security 67 #options GATEWAY # Packet forwarding 68 #options DIRECTED_BROADCAST # Broadcast across subnets 69 70 #options MROUTING # Multicast routing 71 #options PIM # Protocol Independent Multicast 72 options NS # XNS 73 #options NSIP # XNS tunneling over IP 74 options ISO,TPIP # OSI 75 #options EON # OSI tunneling over IP 76 options CCITT,LLC,HDLC # X.25 77 options NETATALK # AppleTalk networking protocols 78 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 79 80 options PPP_BSDCOMP # BSD-Compress compression support for PPP 81 options PPP_DEFLATE # Deflate compression support for PPP 82 options PPP_FILTER # Active filter support for PPP (requires bpf) 83 options PFIL_HOOKS # pfil(9) packet filter hooks 84 options IPFILTER_LOG # ipmon(8) log support 85 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 86 87 #options ALTQ # Manipulate network interfaces' output queues 88 #options ALTQ_BLUE # Stochastic Fair Blue 89 #options ALTQ_CBQ # Class-Based Queueing 90 #options ALTQ_CDNR # Diffserv Traffic Conditioner 91 #options ALTQ_FIFOQ # First-In First-Out Queue 92 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 93 #options ALTQ_HFSC # Hierarchical Fair Service Curve 94 #options ALTQ_LOCALQ # Local queueing discipline 95 #options ALTQ_PRIQ # Priority Queueing 96 #options ALTQ_RED # Random Early Detection 97 #options ALTQ_RIO # RED with IN/OUT 98 #options ALTQ_WFQ # Weighted Fair Queueing 99 100 # Filesystems 101 file-system FFS # Berkeley fast file system 102 file-system EXT2FS # second extended file system (linux) 103 #file-system LFS # log-structured filesystem (experimental) 104 105 file-system MFS # Memory based filesystem 106 107 file-system NFS # Network File System client side code 108 file-system ADOSFS # AmigaDOS file system 109 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 110 file-system MSDOSFS # MS-DOS filesystem 111 112 file-system KERNFS # kernel data-structure filesystem 113 114 file-system FDESC # user file descriptor filesystem 115 file-system NULLFS # loopback filesystem 116 file-system OVERLAY # overlay filesystem 117 #file-system PORTAL # Portal filesystem 118 file-system PROCFS # /proc filesystem 119 file-system UMAPFS # NULLFS + uid and gid remapping 120 file-system UNION # union filesystem 121 file-system SMBFS # experimental - CIFS; also needs nsmb (below) 122 file-system PTYFS # /dev/pts/N support 123 #file-system TMPFS # experimental - Efficient memory file-system 124 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 125 126 # Filesystem options 127 128 #options FFS_EI # FFS Endian Independant support 129 130 options QUOTA # User and group quotas in FFS 131 options SOFTDEP # FFS soft updates support. 132 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 133 options NFSSERVER # Network File System server side code 134 #options FFS_NO_SNAPSHOT # No FFS snapshot support 135 136 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 137 # immutable) behave as system flags. 138 139 # 140 # Compatibility options for various existing systems 141 # 142 143 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 144 options COMPAT_43 # compatibility with 4.3BSD interfaces 145 options COMPAT_09 # compatibility with NetBSD 0.9 146 options COMPAT_10 # compatibility with NetBSD 1.0 147 options COMPAT_12 # compatibility with NetBSD 1.2 148 options COMPAT_13 # compatibility with NetBSD 1.3 149 options COMPAT_14 # compatibility with NetBSD 1.4 150 options COMPAT_15 # compatibility with NetBSD 1.5 151 options COMPAT_16 # compatibility with NetBSD 1.6 152 options COMPAT_20 # compatibility with NetBSD 2.0 153 options COMPAT_30 # NetBSD 3.0 compatibility. 154 options COMPAT_SUNOS # Support to run Sun (m68k) executables 155 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 156 options COMPAT_NOMID # allow nonvalid machine id executables 157 #options COMPAT_LINUX # Support to run Linux/m68k executables 158 159 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 160 options COMPAT_AOUT_M68K # actually make some system calls work. 161 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 162 163 # 164 # Support for System V IPC facilities. 165 # 166 options SYSVSHM # System V-like shared memory 167 options SYSVMSG # System V-like messages 168 options SYSVSEM # System V-like semaphores 169 #options SEMMNI=10 # number of semaphore identifiers 170 #options SEMMNS=60 # number of semaphores in system 171 #options SEMUME=10 # max number of undo entries per process 172 #options SEMMNU=30 # number of undo structures in system 173 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 174 175 # 176 # Support for various kernel options 177 # 178 179 options KTRACE # system call tracing support 180 options SYSTRACE # system call vetting via systrace(1) 181 options LKM # Loadable kernel modules 182 #options INSECURE # disable kernel security levels 183 options SCSIVERBOSE # human readable SCSI error messages 184 options USERCONF # userconf(4) support 185 options NTP # NTP phase/frequency locked loop 186 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 187 188 # Enable experimental buffer queue strategy for better responsiveness under 189 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 190 #options BUFQ_READPRIO 191 #options BUFQ_PRIOCSCAN 192 193 # 194 # Misc. debugging options 195 # 196 options DDB # Kernel debugger 197 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 198 #options DIAGNOSTIC # Extra kernel sanity checks 199 #options DEBUG # Enable misc. kernel debugging code 200 #options SYSCALL_DEBUG # debug all syscalls. 201 #options SCSIDEBUG # Add SCSI debugging statements 202 #options PANICBUTTON # Forced crash via keypress (?) 203 204 # 205 # Amiga specific options 206 # 207 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 208 # first bank of RAM. (default: unlimited) 209 #options NKPTADD=4 # set this for 4 additional KPT pages 210 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 211 # per 16 MB (1<<24 bytes) of RAM 212 # uncomment and decrease this, or uncomment and 213 # increase NKPTADD if you get "out of PT pages" 214 # panics. 215 216 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 217 # before the 10 secondinterval ends, or that KBDRESET does work at all. 218 #options KBDRESET # sync on Ctrl-Amiga-Amiga 219 220 # These options improve performance with the built-in serial port 221 # on slower Amigas. Try the larger buffers first then lev6_defer. 222 #options SERIBUF_SIZE=4096 223 #options SEROBUF_SIZE=32 224 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 225 226 #options DEVRELOAD # implement /dev/reload 227 # # currently only works for a.out kernels 228 229 options RETINACONSOLE # enable code to allow retina to be console 230 options ULOWELLCONSOLE # enable code to allow a2410 to be console 231 options CL5426CONSOLE # Cirrus console 232 options CV64CONSOLE # CyberVision console 233 options TSENGCONSOLE # Tseng console 234 options CV3DCONSOLE # CyberVision 64/3D console 235 236 options GRF_ECS # Enhanced Chip Set 237 options GRF_NTSC # NTSC 238 options GRF_PAL # PAL 239 options GRF_A2024 # Support for the A2024 240 options GRF_AGA # AGA Chip Set 241 options GRF_AGA_VGA # AGA VGAONLY timing 242 options GRF_SUPER72 # AGA Super-72 243 #options KFONT_8X11 # 8x11 font 244 245 # select a font for the console according to the character set and keymap 246 # you want to use 247 options KFONT_CONS_ISO8859_1 248 #options KFONT_CONS_ISO8859_2 249 250 # This is how you would tell the kernel the A2410 oscillator frequencies: 251 # The used frequencies are the defaults, and do not need option setting 252 #options ULOWELL_OSC1=36000000 253 #options ULOWELL_OSC2=66667000 254 255 # This is how you specify the blitting speed, higher values may speed up blits 256 # a littel bit. If you raise this value too much some trash may appear. 257 # the commented version is the default. 258 #options RH_MEMCLK=61000000 259 # this option enables the 64 bit sprite which does not work 260 # for quite a few people. E.g. The cursor sprite will turn to a block 261 # when moved to the top of the screen in X. 262 #options RH_64BIT_SPRITE 263 # enables fast scroll code appears to now work on 040 systems. 264 #options RETINA_SPEED_HACK 265 # enables the Hardwarecursor which does not work on some systems. 266 #options RH_HARDWARECURSOR 267 268 # wscons aware interface to amiga custom chips. 269 # If you enable it enable also wskbd. 270 # 271 272 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 273 #wsdisplay0 at amidisplaycc0 console ? 274 #options WSEMUL_VT100 275 #options FONT_VT220L8x10 276 #options FONT_VT220ISO8x16 277 278 grfcc0 at mainbus0 # custom chips 279 grfrt0 at zbus0 # retina II 280 grfrh0 at zbus0 # retina III 281 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 282 grful0 at zbus0 # A2410 283 grfcv0 at zbus0 # CyberVision 64 284 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 285 grfcv3d0 at zbus0 # CyberVision 64/3D 286 287 grf0 at grfcc0 288 grf1 at grfrt0 289 grf2 at grfrh0 290 grf3 at grfcl? 291 grf4 at grful0 292 grf5 at grfcv0 293 grf6 at grfet? 294 grf7 at grfcv3d0 295 ite0 at grf0 # terminal emulators for grfs 296 ite1 at grf1 # terminal emulators for grfs 297 ite2 at grf2 # terminal emulators for grfs 298 ite3 at grf3 # terminal emulators for grfs 299 ite4 at grf4 # terminal emulators for grfs 300 ite5 at grf5 # terminal emulators for grfs 301 ite6 at grf6 # terminal emulators for grfs 302 ite7 at grf7 # terminal emulators for grfs 303 304 msc0 at zbus0 # A2232 MSC multiport serial. 305 mfc0 at zbus0 # MultiFaceCard I/O board 306 mfcs0 at mfc0 unit 0 # MFC serial 307 mfcs1 at mfc0 unit 1 # MFC serial 308 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 309 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 310 #mfcs2 at mfc1 unit 0 311 #mfcs3 at mfc1 unit 1 312 #mfcp1 at mfc1 unit 0 313 314 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 315 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 316 com* at hyper? port ? # Hypercom3/4 serial ports 317 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 318 319 #options IOBZCLOCK=22118400 # default, uncomment the next line 320 #options IOBZCLOCK=24000000 # if needed. 321 322 iobl* at zbus? # zbus IOBlix 323 com* at iobl? port ? # IOBlix serial ports 324 lpt* at iobl? port ? # IOBlix parallel ports 325 326 327 # 328 # Keyboard device. Optionally can attach a wskbd. 329 # wskbd works together with a wsdisplay so enable them both if you will. 330 # Don't enable wskbd if you use ite. 331 # 332 # XXX in std.amiga: kbd0 at mainbus0 333 334 #wskbd0 at kbd0 console ? 335 336 337 # 338 # Amiga Mainboard devices (sans graphics and keyboard) 339 # 340 341 ser0 at mainbus0 # Amiga onboard serial 342 par0 at mainbus0 # Amiga onboard parallel 343 ms* at mainbus0 # Amiga mice 344 fdc0 at mainbus0 # Amiga FDC 345 fd* at fdc0 unit ? # floppy disks on the later 346 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 347 a2kbbc0 at mainbus0 # A2000 battery backed clock 348 aucc* at mainbus0 # Amiga CC audio 349 audio* at aucc? 350 351 352 #wsmouse* at ms? 353 354 355 # 356 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 357 # 358 359 # Alas, Melody-Z2 dont configure in the DraCo bus. 360 melody* at zbus0 # Melody MPEG audio decoder 361 audio* at melody? 362 363 repulse* at zbus0 # ALiENDESiGN Repulse 364 audio* at repulse? 365 366 toccata* at zbus0 # MacroSystem GmbH Toccata 367 audio* at toccata? 368 369 # Ethernet cards: 370 le* at zbus0 # A2065, Ameristar, Ariadne 371 ne* at zbus0 # AriadneII, X-surf 372 ed* at zbus0 # Hydra, ASDG LanRover 373 es* at zbus0 # CEI A4066 EthernetPLUS 374 qn* at zbus0 # Quicknet 375 376 # Arcnet 377 bah* at zbus0 # C=/Ameristar A2060 / 560 378 379 # Greater Valley Product Bus 380 gvpbus* at zbus0 381 382 # scsi stuff, all possible 383 gtsc0 at gvpbus? # GVP series II scsi 384 scsibus* at gtsc0 385 ahsc0 at mainbus0 # A3000 scsi 386 scsibus* at ahsc0 387 atzsc0 at zbus0 # A2091 scsi 388 scsibus* at atzsc0 389 wstsc0 at zbus0 # Wordsync II scsi 390 scsibus* at wstsc0 391 ivsc0 at zbus0 # IVS scsi 392 scsibus* at ivsc0 393 mlhsc0 at zbus0 # Hacker scsi 394 scsibus* at mlhsc0 395 otgsc0 at zbus0 # 12 gauge scsi 396 scsibus* at otgsc0 397 zssc0 at zbus0 # Zeus scsi 398 scsibus* at zssc0 399 mgnsc0 at zbus0 # Magnum scsi 400 scsibus* at mgnsc0 401 wesc0 at zbus0 # Warp Engine scsi 402 scsibus* at wesc0 403 afsc0 at zbus0 # A4091 scsi 404 scsibus* at afsc0 405 aftsc0 at mainbus0 # A4000T scsi 406 scsibus* at aftsc0 407 flsc0 at zbus0 # FastlaneZ3 scsi 408 scsibus* at flsc0 409 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 410 scsibus* at bzsc0 411 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 412 scsibus* at bzivsc0 413 bztzsc0 at zbus0 # Blizzard 2060 scsi 414 scsibus* at bztzsc0 415 cbsc0 at zbus0 # CyberSCSI I 416 scsibus* at cbsc0 417 cbiisc0 at zbus0 # CyberSCSI II 418 scsibus* at cbiisc0 419 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 420 scsibus* at cbiiisc0 421 empsc0 at zbus0 # Emplant scsi 422 scsibus* at empsc0 423 424 wdc0 at mainbus0 # A4000 & A1200 IDE bus 425 atabus* at wdc? channel ? # ATA bus 426 wd* at atabus? drive ? # + drives 427 atapibus* at atabus? # ATAPI bus 428 cd* at atapibus? drive ? # ATAPI CD-ROM drives 429 sd* at atapibus? drive ? # ATAPI disk drives 430 431 pccard0 at mainbus0 432 pcmcia* at pccard0 433 com* at pcmcia? function ? # Modems and serial cards 434 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 435 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 436 wdc* at pcmcia? function ? 437 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 438 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 439 mbe* at pcmcia? function ? # MB8696x based Ethernet 440 ne* at pcmcia? function ? # NE2000-compatible Ethernet 441 sm* at pcmcia? function ? # Megahertz Ethernet 442 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 443 com* at mhzc? 444 sm* at mhzc? 445 446 447 448 449 # each hard drive from low target to high 450 # will configure to the next available sd unit number 451 sd* at scsibus? target ? lun ? # scsi disks 452 st* at scsibus? target ? lun ? # scsi tapes 453 cd* at scsibus? target ? lun ? # scsi cds 454 ch* at scsibus? target ? lun ? # scsi autochangers 455 ss* at scsibus? target ? lun ? # scsi scanner 456 uk* at scsibus? target ? lun ? # scsi unknown 457 458 pseudo-device loop # loopback network interface 459 pseudo-device sl 1 # SLIP network interfaces 460 pseudo-device ppp 1 # PPP network interfaces 461 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 462 pseudo-device tun 1 # network tunnel line discipline 463 pseudo-device tap # virtual Ethernet 464 #pseudo-device gre 2 # generic L3 over IP tunnel 465 pseudo-device bpfilter 16 # Berkeley packet filter 466 pseudo-device ipfilter # IP Filter package 467 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 468 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 469 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 470 pseudo-device vlan # IEEE 802.1q encapsulation 471 pseudo-device bridge # simple inter-network bridging 472 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 473 #pseudo-device pf # PF packet filter 474 #pseudo-device pflog # PF log if 475 #pseudo-device fss 4 # file system snapshot device 476 477 pseudo-device view 4 # views (needed for grfcc) 478 pseudo-device pty # pseudo-terminals 479 pseudo-device clockctl # user control of clock subsystem 480 481 #pseudo-device wsfont # wsfont(4) dynamic font loading support 482 #pseudo-device wsmux # mouse & keyboard multiplexor 483 484 pseudo-device vnd 4 # vnode pseudo-disks 485 #options VND_COMPRESSION # compressed vnd(4) 486 pseudo-device ccd 4 # concatenated disk devices 487 #pseudo-device cgd 4 # cryptographic disk devices 488 pseudo-device raid 8 # RAIDframe disk driver 489 options RAID_AUTOCONFIG # auto-configuration of RAID components 490 # Options to enable various other RAIDframe RAID types. 491 # options RF_INCLUDE_EVENODD=1 492 # options RF_INCLUDE_RAID5_RS=1 493 # options RF_INCLUDE_PARITYLOGGING=1 494 # options RF_INCLUDE_CHAINDECLUSTER=1 495 # options RF_INCLUDE_INTERDECLUSTER=1 496 # options RF_INCLUDE_PARITY_DECLUSTERING=1 497 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 498 499 pseudo-device rnd # /dev/random and in-kernel generator 500 #options RND_COM # use "com" randomness as well (BROKEN) 501 502 pseudo-device ksyms # /dev/ksyms (kernel symbols) 503 pseudo-device nsmb # experimental - SMB requester 504 505 # Veriexec 506 #options VERIFIED_EXEC 507 # 508 # a pseudo device needed for veriexec 509 #pseudo-device veriexec 1 510 # 511 # Uncomment the fingerprint methods below that are desired. Note that 512 # removing fingerprint methods will have almost no impact on the kernel 513 # code size. 514 # 515 #options VERIFIED_EXEC_FP_RMD160 516 #options VERIFIED_EXEC_FP_SHA256 517 #options VERIFIED_EXEC_FP_SHA384 518 #options VERIFIED_EXEC_FP_SHA512 519 #options VERIFIED_EXEC_FP_SHA1 520 #options VERIFIED_EXEC_FP_MD5 521 522 config netbsd root on ? type ? 523
Indexes created Wed Oct 29 09:09:48 GMT 2025