DRACO revision 1.175.8.1
1 1.175.8.1 snj # $NetBSD: DRACO,v 1.175.8.1 2018/02/25 21:15:38 snj Exp $ 2 1.28 is # 3 1.69 lukem # This file was automatically created. 4 1.69 lukem # Changes will be lost when make is run in this directory. 5 1.1 is # 6 1.175 tsutsui # Created from: # NetBSD: GENERIC.in,v 1.125 2014/07/05 09:59:06 tsutsui Exp $ 7 1.69 lukem # 8 1.139 rkujawa ## 9 1.69 lukem # GENERIC machine description file 10 1.69 lukem # 11 1.69 lukem # This machine description file is used to generate the default NetBSD 12 1.69 lukem # kernel. The generic kernel does not include all options, subsystems 13 1.69 lukem # and device drivers, but should be useful for most applications. 14 1.69 lukem # 15 1.69 lukem # The machine description file can be customised for your specific 16 1.69 lukem # machine to reduce the kernel size and improve its performance. 17 1.69 lukem # 18 1.69 lukem # For further information on compiling NetBSD kernels, see the config(8) 19 1.69 lukem # man page. 20 1.69 lukem # 21 1.69 lukem # For further information on hardware support for this architecture, see 22 1.69 lukem # the intro(4) man page. For further information about kernel options 23 1.69 lukem # for this architecture, see the options(4) man page. For an explanation 24 1.69 lukem # of each device driver in this file see the section 4 man page for the 25 1.69 lukem # device. 26 1.57 jandberg 27 1.57 jandberg 28 1.21 is include "arch/amiga/conf/std.amiga" 29 1.43 mhitch 30 1.66 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 31 1.66 atatat 32 1.175.8.1 snj #ident "GENERIC-$Revision: 1.175.8.1 $" 33 1.69 lukem 34 1.175 tsutsui makeoptions COPTS="-O2 -fno-reorder-blocks" # see share/mk/sys.mk 35 1.1 is 36 1.1 is maxusers 8 37 1.19 lukem options RTC_OFFSET=0 38 1.1 is 39 1.69 lukem # 40 1.69 lukem # mainboards to support (in addition to Amiga) 41 1.69 lukem # 42 1.19 lukem options DRACO 43 1.69 lukem # 44 1.69 lukem # processors this kernel should support 45 1.69 lukem # 46 1.27 is options M68060 # support for 060 47 1.27 is options M060SP # MC68060 software support (Required for 060) 48 1.1 is 49 1.69 lukem # 50 1.69 lukem # Networking options 51 1.69 lukem # 52 1.19 lukem options INET # IP networking support (Required) 53 1.42 is options INET6 # IPV6 54 1.42 is #options IPSEC # IP security 55 1.42 is #options IPSEC_DEBUG # debug for IP security 56 1.19 lukem #options GATEWAY # Packet forwarding 57 1.19 lukem #options DIRECTED_BROADCAST # Broadcast across subnets 58 1.45 is 59 1.27 is #options MROUTING # Multicast routing 60 1.85 manu #options PIM # Protocol Independent Multicast 61 1.27 is options NETATALK # AppleTalk networking protocols 62 1.54 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 63 1.45 is 64 1.27 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 65 1.27 is options PPP_DEFLATE # Deflate compression support for PPP 66 1.27 is options PPP_FILTER # Active filter support for PPP (requires bpf) 67 1.27 is options IPFILTER_LOG # ipmon(8) log support 68 1.116 christos options IPFILTER_LOOKUP # ippool(8) support 69 1.135 mrg options IPFILTER_COMPAT # Compat for IP-Filter 70 1.72 provos #options IPFILTER_DEFAULT_BLOCK # block all packets by default 71 1.1 is 72 1.83 abs #options ALTQ # Manipulate network interfaces' output queues 73 1.83 abs #options ALTQ_BLUE # Stochastic Fair Blue 74 1.83 abs #options ALTQ_CBQ # Class-Based Queueing 75 1.83 abs #options ALTQ_CDNR # Diffserv Traffic Conditioner 76 1.83 abs #options ALTQ_FIFOQ # First-In First-Out Queue 77 1.83 abs #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 78 1.83 abs #options ALTQ_HFSC # Hierarchical Fair Service Curve 79 1.83 abs #options ALTQ_LOCALQ # Local queueing discipline 80 1.83 abs #options ALTQ_PRIQ # Priority Queueing 81 1.83 abs #options ALTQ_RED # Random Early Detection 82 1.83 abs #options ALTQ_RIO # RED with IN/OUT 83 1.83 abs #options ALTQ_WFQ # Weighted Fair Queueing 84 1.83 abs 85 1.69 lukem # Filesystems 86 1.9 thorpej file-system FFS # Berkeley fast file system 87 1.34 tron file-system EXT2FS # second extended file system (linux) 88 1.27 is #file-system LFS # log-structured filesystem (experimental) 89 1.45 is 90 1.9 thorpej file-system MFS # Memory based filesystem 91 1.45 is 92 1.9 thorpej file-system NFS # Network File System client side code 93 1.9 thorpej file-system ADOSFS # AmigaDOS file system 94 1.27 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 95 1.27 is file-system MSDOSFS # MS-DOS filesystem 96 1.45 is 97 1.45 is file-system KERNFS # kernel data-structure filesystem 98 1.45 is 99 1.27 is file-system FDESC # user file descriptor filesystem 100 1.27 is file-system NULLFS # loopback filesystem 101 1.42 is file-system OVERLAY # overlay filesystem 102 1.27 is file-system PROCFS # /proc filesystem 103 1.27 is file-system UMAPFS # NULLFS + uid and gid remapping 104 1.27 is file-system UNION # union filesystem 105 1.92 jdolecek file-system SMBFS # experimental - CIFS; also needs nsmb (below) 106 1.103 christos file-system PTYFS # /dev/pts/N support 107 1.134 chs file-system TMPFS # Efficient memory file-system 108 1.109 reinoud #file-system UDF # experimental - OSTA UDF CD/DVD file-system 109 1.27 is 110 1.69 lukem # Filesystem options 111 1.45 is 112 1.138 wiz #options FFS_EI # FFS Endian Independent support 113 1.147 dholland options WAPBL # File system journaling support 114 1.45 is 115 1.137 bouyer options QUOTA # legacy UFS quotas 116 1.137 bouyer options QUOTA2 # new, in-filesystem UFS quotas 117 1.89 hannken #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 118 1.34 tron options NFSSERVER # Network File System server side code 119 1.106 tsutsui #options FFS_NO_SNAPSHOT # No FFS snapshot support 120 1.45 is 121 1.34 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 122 1.34 tron # immutable) behave as system flags. 123 1.27 is 124 1.69 lukem # 125 1.69 lukem # Compatibility options for various existing systems 126 1.69 lukem # 127 1.27 is 128 1.54 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 129 1.27 is options COMPAT_43 # compatibility with 4.3BSD interfaces 130 1.27 is options COMPAT_09 # compatibility with NetBSD 0.9 131 1.27 is options COMPAT_10 # compatibility with NetBSD 1.0 132 1.27 is options COMPAT_12 # compatibility with NetBSD 1.2 133 1.27 is options COMPAT_13 # compatibility with NetBSD 1.3 134 1.40 augustss options COMPAT_14 # compatibility with NetBSD 1.4 135 1.79 cl options COMPAT_15 # compatibility with NetBSD 1.5 136 1.79 cl options COMPAT_16 # compatibility with NetBSD 1.6 137 1.93 simonb options COMPAT_20 # compatibility with NetBSD 2.0 138 1.102 christos options COMPAT_30 # NetBSD 3.0 compatibility. 139 1.120 he options COMPAT_40 # NetBSD 4.0 compatibility. 140 1.130 mhitch options COMPAT_50 # NetBSD 5.0 compatibility. 141 1.159 apb options COMPAT_60 # NetBSD 6.0 compatibility. 142 1.30 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 143 1.175.8.1 snj #options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 144 1.27 is options COMPAT_NOMID # allow nonvalid machine id executables 145 1.30 is #options COMPAT_LINUX # Support to run Linux/m68k executables 146 1.61 is 147 1.61 is options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 148 1.62 is options COMPAT_AOUT_M68K # actually make some system calls work. 149 1.86 christos options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 150 1.1 is 151 1.69 lukem # 152 1.69 lukem # Support for System V IPC facilities. 153 1.69 lukem # 154 1.19 lukem options SYSVSHM # System V-like shared memory 155 1.19 lukem options SYSVMSG # System V-like messages 156 1.19 lukem options SYSVSEM # System V-like semaphores 157 1.1 is 158 1.69 lukem # 159 1.69 lukem # Support for various kernel options 160 1.69 lukem # 161 1.27 is 162 1.27 is options KTRACE # system call tracing support 163 1.58 jdolecek #options INSECURE # disable kernel security levels 164 1.58 jdolecek options SCSIVERBOSE # human readable SCSI error messages 165 1.71 lukem options USERCONF # userconf(4) support 166 1.27 is options NTP # NTP phase/frequency locked loop 167 1.69 lukem #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 168 1.74 wiz 169 1.74 wiz # Enable experimental buffer queue strategy for better responsiveness under 170 1.74 wiz # high disk I/O load. Use it with caution - it's not proven to be stable yet. 171 1.95 tsutsui #options BUFQ_READPRIO 172 1.95 tsutsui #options BUFQ_PRIOCSCAN 173 1.1 is 174 1.69 lukem # 175 1.69 lukem # Misc. debugging options 176 1.69 lukem # 177 1.19 lukem options DDB # Kernel debugger 178 1.19 lukem #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 179 1.105 chs #options DIAGNOSTIC # Extra kernel sanity checks 180 1.27 is #options DEBUG # Enable misc. kernel debugging code 181 1.19 lukem #options SYSCALL_DEBUG # debug all syscalls. 182 1.19 lukem #options SCSIDEBUG # Add SCSI debugging statements 183 1.67 thorpej #options PANICBUTTON # Forced crash via keypress (?) 184 1.1 is 185 1.69 lukem # 186 1.69 lukem # Amiga specific options 187 1.69 lukem # 188 1.30 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 189 1.32 is # first bank of RAM. (default: unlimited) 190 1.32 is 191 1.69 lukem # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 192 1.69 lukem # before the 10 secondinterval ends, or that KBDRESET does work at all. 193 1.27 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 194 1.27 is 195 1.69 lukem # These options improve performance with the built-in serial port 196 1.69 lukem # on slower Amigas. Try the larger buffers first then lev6_defer. 197 1.27 is #options SERIBUF_SIZE=4096 198 1.27 is #options SEROBUF_SIZE=32 199 1.27 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 200 1.77 is 201 1.1 is 202 1.19 lukem options RETINACONSOLE # enable code to allow retina to be console 203 1.27 is #options KFONT_8X11 # 8x11 font 204 1.65 heinz 205 1.69 lukem # select a font for the console according to the character set and keymap 206 1.69 lukem # you want to use 207 1.65 heinz options KFONT_CONS_ISO8859_1 208 1.65 heinz #options KFONT_CONS_ISO8859_2 209 1.1 is 210 1.69 lukem # This is how you would tell the kernel the A2410 oscillator frequencies: 211 1.69 lukem # The used frequencies are the defaults, and do not need option setting 212 1.27 is #options ULOWELL_OSC1=36000000 213 1.27 is #options ULOWELL_OSC2=66667000 214 1.27 is 215 1.69 lukem # This is how you specify the blitting speed, higher values may speed up blits 216 1.69 lukem # a littel bit. If you raise this value too much some trash may appear. 217 1.69 lukem # the commented version is the default. 218 1.27 is #options RH_MEMCLK=61000000 219 1.69 lukem # this option enables the 64 bit sprite which does not work 220 1.69 lukem # for quite a few people. E.g. The cursor sprite will turn to a block 221 1.69 lukem # when moved to the top of the screen in X. 222 1.19 lukem #options RH_64BIT_SPRITE 223 1.69 lukem # enables fast scroll code appears to now work on 040 systems. 224 1.19 lukem #options RETINA_SPEED_HACK 225 1.69 lukem # enables the Hardwarecursor which does not work on some systems. 226 1.27 is #options RH_HARDWARECURSOR 227 1.27 is 228 1.69 lukem 229 1.27 is grfrh0 at zbus0 # retina III 230 1.1 is 231 1.1 is grf2 at grfrh0 232 1.30 is ite2 at grf2 # terminal emulators for grfs 233 1.1 is 234 1.27 is msc0 at zbus0 # A2232 MSC multiport serial. 235 1.27 is mfc0 at zbus0 # MultiFaceCard I/O board 236 1.27 is mfcs0 at mfc0 unit 0 # MFC serial 237 1.27 is mfcs1 at mfc0 unit 1 # MFC serial 238 1.1 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 239 1.1 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 240 1.1 is #mfcs2 at mfc1 unit 0 241 1.1 is #mfcs3 at mfc1 unit 1 242 1.1 is #mfcp1 at mfc1 unit 0 243 1.12 is 244 1.35 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 245 1.27 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 246 1.27 is com* at hyper? port ? # Hypercom3/4 serial ports 247 1.35 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 248 1.27 is 249 1.56 lukem #options IOBZCLOCK=22118400 # default, uncomment the next line 250 1.56 lukem #options IOBZCLOCK=24000000 # if needed. 251 1.52 is 252 1.52 is iobl* at zbus? # zbus IOBlix 253 1.52 is com* at iobl? port ? # IOBlix serial ports 254 1.52 is lpt* at iobl? port ? # IOBlix parallel ports 255 1.52 is 256 1.69 lukem 257 1.66 atatat # 258 1.69 lukem # Keyboard device. Optionally can attach a wskbd. 259 1.69 lukem # wskbd works together with a wsdisplay so enable them both if you will. 260 1.69 lukem # Don't enable wskbd if you use ite. 261 1.69 lukem # 262 1.69 lukem # XXX in std.amiga: kbd0 at mainbus0 263 1.52 is #wskbd0 at kbd0 console ? 264 1.45 is 265 1.69 lukem 266 1.80 jandberg 267 1.80 jandberg #wsmouse* at ms? 268 1.69 lukem 269 1.69 lukem # 270 1.69 lukem # DraCo Mainboard devices (sans keyboard) 271 1.69 lukem # 272 1.27 is 273 1.14 is drbbc0 at mainbus0 # DraCo battery backed clock 274 1.15 is drsupio0 at mainbus0 # DraCo superio chip 275 1.15 is com* at drsupio? port ? # DraCo serial 276 1.17 is lpt0 at drsupio? port ? # DraCo parallel 277 1.1 is 278 1.69 lukem # 279 1.69 lukem # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 280 1.69 lukem # 281 1.69 lukem 282 1.55 is 283 1.55 is repulse* at zbus0 # ALiENDESiGN Repulse 284 1.55 is audio* at repulse? 285 1.59 is 286 1.59 is toccata* at zbus0 # MacroSystem GmbH Toccata 287 1.59 is audio* at toccata? 288 1.18 is 289 1.69 lukem # Ethernet cards: 290 1.27 is le* at zbus0 # A2065, Ameristar, Ariadne 291 1.157 rkujawa ne* at zbus0 # AriadneII 292 1.36 is ed* at zbus0 # Hydra, ASDG LanRover 293 1.36 is es* at zbus0 # CEI A4066 EthernetPLUS 294 1.36 is qn* at zbus0 # Quicknet 295 1.1 is 296 1.157 rkujawa 297 1.69 lukem # Arcnet 298 1.27 is bah* at zbus0 # C=/Ameristar A2060 / 560 299 1.27 is 300 1.69 lukem 301 1.27 is drsc0 at mainbus0 # DraCo scsi 302 1.1 is scsibus* at drsc0 303 1.1 is 304 1.69 lukem 305 1.69 lukem # each hard drive from low target to high 306 1.69 lukem # will configure to the next available sd unit number 307 1.1 is sd* at scsibus? target ? lun ? # scsi disks 308 1.1 is st* at scsibus? target ? lun ? # scsi tapes 309 1.30 is cd* at scsibus? target ? lun ? # scsi cds 310 1.47 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 311 1.4 veego ss* at scsibus? target ? lun ? # scsi scanner 312 1.7 veego uk* at scsibus? target ? lun ? # scsi unknown 313 1.126 tsutsui # 314 1.126 tsutsui # accept filters 315 1.126 tsutsui pseudo-device accf_data # "dataready" accept filter 316 1.126 tsutsui pseudo-device accf_http # "httpready" accept filter 317 1.126 tsutsui 318 1.27 is pseudo-device loop # loopback network interface 319 1.111 cube pseudo-device sl # SLIP network interfaces 320 1.111 cube pseudo-device ppp # PPP network interfaces 321 1.57 jandberg pseudo-device pppoe # PPP over Ethernet (RFC 2516) 322 1.111 cube pseudo-device tun # network tunnel line discipline 323 1.88 cube pseudo-device tap # virtual Ethernet 324 1.111 cube #pseudo-device gre # generic L3 over IP tunnel 325 1.110 rpaulo pseudo-device bpfilter # Berkeley packet filter 326 1.113 tsutsui #pseudo-device carp # Common Address Redundancy Protocol 327 1.27 is pseudo-device ipfilter # IP Filter package 328 1.111 cube pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 329 1.111 cube #pseudo-device faith # IPv[46] tcp relay translation i/f 330 1.112 pavel pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 331 1.51 is pseudo-device vlan # IEEE 802.1q encapsulation 332 1.57 jandberg pseudo-device bridge # simple inter-network bridging 333 1.75 perseant #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 334 1.119 martin pseudo-device agr # IEEE 802.3ad link aggregation 335 1.83 abs #pseudo-device pf # PF packet filter 336 1.83 abs #pseudo-device pflog # PF log if 337 1.132 pooka pseudo-device fss # file system snapshot device 338 1.148 mlelstv pseudo-device putter # for puffs and pud 339 1.27 is 340 1.38 is pseudo-device view 4 # views (needed for grfcc) 341 1.49 jdolecek pseudo-device pty # pseudo-terminals 342 1.68 lukem pseudo-device clockctl # user control of clock subsystem 343 1.27 is 344 1.82 jandberg #pseudo-device wsfont # wsfont(4) dynamic font loading support 345 1.94 jandberg #pseudo-device wsmux # mouse & keyboard multiplexor 346 1.82 jandberg 347 1.111 cube pseudo-device vnd # vnode pseudo-disks 348 1.99 hubertf #options VND_COMPRESSION # compressed vnd(4) 349 1.168 christos pseudo-device ccd # concatenated disk devices 350 1.168 christos #pseudo-device cgd # cryptographic disk devices 351 1.169 christos pseudo-device raid # RAIDframe disk driver 352 1.58 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 353 1.69 lukem # Options to enable various other RAIDframe RAID types. 354 1.69 lukem # options RF_INCLUDE_EVENODD=1 355 1.69 lukem # options RF_INCLUDE_RAID5_RS=1 356 1.69 lukem # options RF_INCLUDE_PARITYLOGGING=1 357 1.69 lukem # options RF_INCLUDE_CHAINDECLUSTER=1 358 1.69 lukem # options RF_INCLUDE_INTERDECLUSTER=1 359 1.69 lukem # options RF_INCLUDE_PARITY_DECLUSTERING=1 360 1.69 lukem # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 361 1.27 is 362 1.56 lukem #options RND_COM # use "com" randomness as well (BROKEN) 363 1.78 is 364 1.78 is pseudo-device ksyms # /dev/ksyms (kernel symbols) 365 1.92 jdolecek pseudo-device nsmb # experimental - SMB requester 366 1.1 is 367 1.108 tsutsui # Veriexec 368 1.108 tsutsui # 369 1.108 tsutsui # a pseudo device needed for veriexec 370 1.169 christos #pseudo-device veriexec 371 1.108 tsutsui # 372 1.108 tsutsui # Uncomment the fingerprint methods below that are desired. Note that 373 1.108 tsutsui # removing fingerprint methods will have almost no impact on the kernel 374 1.108 tsutsui # code size. 375 1.108 tsutsui # 376 1.108 tsutsui #options VERIFIED_EXEC_FP_RMD160 377 1.108 tsutsui #options VERIFIED_EXEC_FP_SHA256 378 1.108 tsutsui #options VERIFIED_EXEC_FP_SHA384 379 1.108 tsutsui #options VERIFIED_EXEC_FP_SHA512 380 1.108 tsutsui #options VERIFIED_EXEC_FP_SHA1 381 1.108 tsutsui #options VERIFIED_EXEC_FP_MD5 382 1.108 tsutsui 383 1.9 thorpej config netbsd root on ? type ? 384
Indexes created Wed Oct 22 13:09:56 GMT 2025