DRACO revision 1.30
1 1.28 is # $NetBSD: DRACO,v 1.30 1999/03/09 12:22:13 is Exp $ 2 1.28 is # 3 1.27 is # This file was automatically created. Changes will be 4 1.27 is # lost when running make in this directory. 5 1.1 is # 6 1.27 is # Created from: 7 1.30 is #$ NetBSD: GENERIC,v 1.118 1999/03/09 12:20:41 is Exp $ 8 1.1 is 9 1.21 is include "arch/amiga/conf/std.amiga" 10 1.1 is 11 1.1 is maxusers 8 12 1.19 lukem options RTC_OFFSET=0 13 1.1 is 14 1.27 is #mainboards to support (in addition to Amiga) 15 1.27 is 16 1.19 lukem options DRACO 17 1.4 veego 18 1.27 is #processors this kernel should support 19 1.27 is 20 1.27 is options M68060 # support for 060 21 1.27 is options M060SP # MC68060 software support (Required for 060) 22 1.4 veego 23 1.27 is #Networking options 24 1.1 is 25 1.19 lukem options INET # IP networking support (Required) 26 1.19 lukem #options GATEWAY # Packet forwarding 27 1.19 lukem #options DIRECTED_BROADCAST # Broadcast across subnets 28 1.27 is #options MROUTING # Multicast routing 29 1.27 is options NS # XNS 30 1.27 is #options NSIP # XNS tunneling over IP 31 1.27 is options ISO,TPIP # OSI 32 1.27 is options EON # OSI tunneling over IP 33 1.27 is options CCITT,LLC,HDLC # X.25 34 1.27 is options NETATALK # AppleTalk networking protocols 35 1.27 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 36 1.27 is options PPP_DEFLATE # Deflate compression support for PPP 37 1.27 is options PPP_FILTER # Active filter support for PPP (requires bpf) 38 1.27 is options PFIL_HOOKS # pfil(9) packet filter hooks 39 1.27 is options IPFILTER_LOG # ipmon(8) log support 40 1.1 is 41 1.9 thorpej file-system FFS # Berkeley fast file system 42 1.27 is #file-system LFS # log-structured filesystem (experimental) 43 1.9 thorpej file-system MFS # Memory based filesystem 44 1.9 thorpej file-system NFS # Network File System client side code 45 1.9 thorpej file-system ADOSFS # AmigaDOS file system 46 1.27 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 47 1.27 is file-system MSDOSFS # MS-DOS filesystem 48 1.27 is file-system FDESC # user file descriptor filesystem 49 1.27 is file-system KERNFS # kernel data-structure filesystem 50 1.27 is file-system NULLFS # loopback filesystem 51 1.9 thorpej #file-system PORTAL # Portal filesystem 52 1.27 is file-system PROCFS # /proc filesystem 53 1.27 is file-system UMAPFS # NULLFS + uid and gid remapping 54 1.27 is file-system UNION # union filesystem 55 1.27 is 56 1.27 is #Filesystem options 57 1.27 is options NFSSERVER # Network File System server side code 58 1.27 is options QUOTA # User and group quotas in FFS 59 1.27 is #options FFS_EI # FFS Endian Independant support 60 1.27 is 61 1.27 is #Compatability options for various existing systems 62 1.27 is 63 1.27 is options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 64 1.27 is options COMPAT_43 # compatibility with 4.3BSD interfaces 65 1.27 is options COMPAT_09 # compatibility with NetBSD 0.9 66 1.27 is options COMPAT_10 # compatibility with NetBSD 1.0 67 1.27 is options COMPAT_12 # compatibility with NetBSD 1.2 68 1.27 is options COMPAT_13 # compatibility with NetBSD 1.3 69 1.30 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 70 1.27 is options COMPAT_NOMID # allow nonvalid machine id executables 71 1.30 is #options COMPAT_LINUX # Support to run Linux/m68k executables 72 1.27 is #options EXEC_ELF32 # 32-bit ELF executables (Linux) 73 1.1 is 74 1.27 is #Support for System V IPC facilities. 75 1.1 is 76 1.19 lukem options SYSVSHM # System V-like shared memory 77 1.19 lukem options SYSVMSG # System V-like messages 78 1.19 lukem options SYSVSEM # System V-like semaphores 79 1.1 is 80 1.27 is #Support for various kernel options 81 1.27 is 82 1.27 is options KTRACE # system call tracing support 83 1.19 lukem options LKM # Loadable kernel modules 84 1.27 is options NKMEMCLUSTERS=256 # Size of kernel malloc area 85 1.27 is options UCONSOLE # anyone can redirect a virtual console 86 1.27 is #options INSECURE # allow, among other insecure stuff, LKM 87 1.30 is #loading in multi-user mode. 88 1.27 is options SCSIVERBOSE # Verbose SCSI errors 89 1.27 is 90 1.27 is options NTP # NTP phase/frequency locked loop 91 1.27 is 92 1.27 is #Misc. debugging options 93 1.1 is 94 1.19 lukem options DDB # Kernel debugger 95 1.19 lukem #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 96 1.27 is options DIAGNOSTIC # Extra kernel sanity checks 97 1.27 is #options DEBUG # Enable misc. kernel debugging code 98 1.19 lukem #options SYSCALL_DEBUG # debug all syscalls. 99 1.19 lukem #options SCSIDEBUG # Add SCSI debugging statements 100 1.19 lukem #options PANICBUTTON # Forced crash via keypress (???) 101 1.1 is 102 1.27 is #Amiga specific options 103 1.27 is 104 1.30 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 105 1.30 is #first bank of RAM. (default: unlimited) 106 1.27 is #options NKPTADD=4 # set this for 4 additional KPT pages 107 1.27 is #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 108 1.30 is #per 16 MB (1<<24 bytes) of RAM 109 1.30 is 110 1.30 is #increase NKPTADD if you get "out of PT pages" 111 1.30 is #panics. 112 1.27 is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 113 1.27 is #before the 10 secondinterval ends, or that KBDRESET does work at all. 114 1.27 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 115 1.27 is 116 1.27 is #These options improve performance with the built-in serial port 117 1.27 is #on slower Amigas. Try the larger buffers first then lev6_defer. 118 1.27 is #options SERIBUF_SIZE=4096 119 1.27 is #options SEROBUF_SIZE=32 120 1.27 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 121 1.1 is 122 1.19 lukem options RETINACONSOLE # enable code to allow retina to be console 123 1.1 is 124 1.27 is #options KFONT_8X11 # 8x11 font 125 1.1 is 126 1.27 is #This is how you would tell the kernel the A2410 oscillator frequencies: 127 1.30 is #The used frequencies are the defaults, decrease this, or define and do not need option setting 128 1.27 is #options ULOWELL_OSC1=36000000 129 1.27 is #options ULOWELL_OSC2=66667000 130 1.27 is 131 1.27 is #This is how you specify the blitting speed, higher values may speed up blits 132 1.27 is #a littel bit. If you raise this value too much some trash may appear. 133 1.27 is #the commented version is the default. 134 1.27 is #options RH_MEMCLK=61000000 135 1.30 is #this option enables the 64 bit sprite which does not work 136 1.27 is #for quite a few people. E.g. The cursor sprite will turn to a block 137 1.27 is #when moved to the top of the screen in X. 138 1.19 lukem #options RH_64BIT_SPRITE 139 1.27 is #enables fast scroll code appears to now work on 040 systems. 140 1.19 lukem #options RETINA_SPEED_HACK 141 1.27 is #enables the Hardwarecursor which does not work on some systems. 142 1.27 is #options RH_HARDWARECURSOR 143 1.27 is 144 1.27 is grfrh0 at zbus0 # retina III 145 1.1 is 146 1.1 is grf2 at grfrh0 147 1.27 is 148 1.30 is ite2 at grf2 # terminal emulators for grfs 149 1.1 is 150 1.27 is msc0 at zbus0 # A2232 MSC multiport serial. 151 1.27 is mfc0 at zbus0 # MultiFaceCard I/O board 152 1.27 is mfcs0 at mfc0 unit 0 # MFC serial 153 1.27 is mfcs1 at mfc0 unit 1 # MFC serial 154 1.1 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 155 1.1 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 156 1.1 is #mfcs2 at mfc1 unit 0 157 1.1 is #mfcs3 at mfc1 unit 1 158 1.1 is #mfcp1 at mfc1 unit 0 159 1.12 is 160 1.27 is hyper* at zbus? # zbus HyperCom3 + HyperCom4 161 1.27 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 162 1.27 is com* at hyper? port ? # Hypercom3/4 serial ports 163 1.27 is #lpt* at hyper? port ? # not yet: Hypercom3 parallel port 164 1.27 is 165 1.27 is #DraCo Mainboard devices (sans keyboard) 166 1.27 is 167 1.14 is drbbc0 at mainbus0 # DraCo battery backed clock 168 1.15 is drsupio0 at mainbus0 # DraCo superio chip 169 1.15 is com* at drsupio? port ? # DraCo serial 170 1.17 is lpt0 at drsupio? port ? # DraCo parallel 171 1.1 is 172 1.27 is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 173 1.18 is 174 1.27 is #Ethernet cards: 175 1.27 is le* at zbus0 # A2065, Ameristar, Ariadne 176 1.27 is ne* at zbus0 # AriadneII 177 1.27 is ed0 at zbus0 # Hydra, ASDG LanRover 178 1.27 is es0 at zbus0 # CEI A4066 EthernetPLUS 179 1.27 is qn0 at zbus0 # Quicknet 180 1.1 is 181 1.27 is bah* at zbus0 # C=/Ameristar A2060 / 560 182 1.1 is 183 1.27 is #Greater Valley Product Bus 184 1.27 is gvpbus* at zbus0 185 1.27 is 186 1.27 is drsc0 at mainbus0 # DraCo scsi 187 1.1 is scsibus* at drsc0 188 1.1 is 189 1.27 is #each hard drive from low target to high 190 1.27 is #will configure to the next available sd unit number 191 1.1 is sd* at scsibus? target ? lun ? # scsi disks 192 1.1 is st* at scsibus? target ? lun ? # scsi tapes 193 1.30 is cd* at scsibus? target ? lun ? # scsi cds 194 1.4 veego ss* at scsibus? target ? lun ? # scsi scanner 195 1.7 veego ch* at scsibus? target ? lun ? # scsi autochangers 196 1.7 veego uk* at scsibus? target ? lun ? # scsi unknown 197 1.1 is 198 1.27 is pseudo-device loop # loopback network interface 199 1.27 is pseudo-device sl 1 # SLIP network interfaces 200 1.27 is pseudo-device ppp 1 # PPP network interfaces 201 1.27 is pseudo-device tun 1 # network tunnel line discipline 202 1.27 is #pseudo-device gre 2 # generic L3 over IP tunnel 203 1.27 is pseudo-device bpfilter 16 # Berkeley packet filter 204 1.27 is pseudo-device ipfilter # IP Filter package 205 1.27 is 206 1.27 is pseudo-device view 10 # views 207 1.27 is pseudo-device pty 16 # pseudo ptys 208 1.27 is 209 1.27 is pseudo-device vnd 4 # vnode pseudo-disks 210 1.27 is pseudo-device ccd 4 # concatenated disk devices 211 1.27 is #pseudo-device raid 4 # RAIDframe disk driver 212 1.27 is 213 1.27 is #rnd is EXPERIMENTAL at this point. 214 1.30 is #pseudo-device rnd # /dev/random decrease this, or define and in-kernel generator 215 1.27 is #options RND_COM # use "com" randomness as well (BROKEN) 216 1.1 is 217 1.9 thorpej config netbsd root on ? type ? 218 1.27 is 219
Indexes created Wed Oct 01 19:09:53 GMT 2025