Home | History | Annotate | Line # | Download | only in conf
DRACO revision 1.32.2.1.2.2
      1  1.32.2.1.2.2  thorpej # $NetBSD: DRACO,v 1.32.2.1.2.2 1999/08/02 19:36:40 thorpej Exp $
      2          1.28       is #
      3          1.27       is # This file was automatically created. Changes will be
      4          1.27       is # lost when running make in this directory.
      5           1.1       is #
      6          1.27       is # Created from: 
      7  1.32.2.1.2.2  thorpej #$ NetBSD: GENERIC,v 1.127 1999/07/28 05:55:19 is Exp $
      8           1.1       is 
      9          1.21       is include "arch/amiga/conf/std.amiga"
     10           1.1       is 
     11           1.1       is maxusers	8
     12          1.19    lukem options 	RTC_OFFSET=0
     13           1.1       is 
     14          1.27       is #mainboards to support (in addition to Amiga)
     15          1.27       is 
     16          1.19    lukem options 	DRACO
     17           1.4    veego 
     18          1.27       is #processors this kernel should support
     19          1.27       is 
     20          1.27       is options 	M68060		# support for 060
     21          1.27       is options 	M060SP		# MC68060 software support (Required for 060)
     22           1.4    veego 
     23          1.27       is #Networking options
     24           1.1       is 
     25          1.19    lukem options 	INET		# IP networking support (Required)
     26          1.19    lukem #options 	GATEWAY		# Packet forwarding
     27          1.19    lukem #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     28          1.27       is #options 	MROUTING	# Multicast routing
     29          1.27       is options 	NS		# XNS
     30          1.27       is #options 	NSIP		# XNS tunneling over IP
     31          1.27       is options 	ISO,TPIP	# OSI
     32          1.27       is options 	EON		# OSI tunneling over IP
     33          1.27       is options 	CCITT,LLC,HDLC	# X.25
     34          1.27       is options 	NETATALK	# AppleTalk networking protocols
     35          1.27       is options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     36          1.27       is options 	PPP_DEFLATE	# Deflate compression support for PPP
     37          1.27       is options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     38          1.27       is options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     39          1.27       is options 	IPFILTER_LOG	# ipmon(8) log support
     40           1.1       is 
     41           1.9  thorpej file-system 	FFS		# Berkeley fast file system
     42  1.32.2.1.2.1  thorpej file-system 	EXT2FS		# second extended file system (linux)
     43          1.27       is #file-system 	LFS		# log-structured filesystem (experimental)
     44           1.9  thorpej file-system 	MFS		# Memory based filesystem
     45           1.9  thorpej file-system 	NFS		# Network File System client side code
     46           1.9  thorpej file-system 	ADOSFS		# AmigaDOS file system
     47          1.27       is file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
     48          1.27       is file-system 	MSDOSFS		# MS-DOS filesystem
     49          1.27       is file-system 	FDESC		# user file descriptor filesystem
     50          1.27       is file-system 	KERNFS		# kernel data-structure filesystem
     51          1.27       is file-system 	NULLFS		# loopback filesystem
     52           1.9  thorpej #file-system 	PORTAL		# Portal filesystem
     53          1.27       is file-system 	PROCFS		# /proc filesystem
     54          1.27       is file-system 	UMAPFS		# NULLFS + uid and gid remapping
     55          1.27       is file-system 	UNION		# union filesystem
     56          1.27       is 
     57          1.27       is #Filesystem options
     58          1.27       is options 	QUOTA		# User and group quotas in FFS
     59          1.27       is #options 	FFS_EI		# FFS Endian Independant support
     60  1.32.2.1.2.1  thorpej options 	NFSSERVER	# Network File System server side code
     61  1.32.2.1.2.1  thorpej #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
     62  1.32.2.1.2.1  thorpej 				# immutable) behave as system flags.
     63          1.27       is 
     64          1.27       is #Compatability options for various existing systems
     65          1.27       is 
     66          1.27       is options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
     67          1.27       is options 	COMPAT_43	# compatibility with 4.3BSD interfaces
     68          1.27       is options 	COMPAT_09	# compatibility with NetBSD 0.9
     69          1.27       is options 	COMPAT_10	# compatibility with NetBSD 1.0
     70          1.27       is options 	COMPAT_12	# compatibility with NetBSD 1.2
     71          1.27       is options 	COMPAT_13	# compatibility with NetBSD 1.3
     72  1.32.2.1.2.2  thorpej options 	COMPAT_14	# compatibility with NetBSD 1.4
     73          1.30       is options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
     74  1.32.2.1.2.1  thorpej options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
     75          1.27       is options 	COMPAT_NOMID	# allow nonvalid machine id executables
     76          1.30       is #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
     77  1.32.2.1.2.1  thorpej options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
     78           1.1       is 
     79          1.27       is #Support for System V IPC facilities.
     80           1.1       is 
     81          1.19    lukem options 	SYSVSHM		# System V-like shared memory
     82          1.19    lukem options 	SYSVMSG		# System V-like messages
     83          1.19    lukem options 	SYSVSEM		# System V-like semaphores
     84           1.1       is 
     85          1.27       is #Support for various kernel options
     86          1.27       is 
     87          1.27       is options 	KTRACE		# system call tracing support
     88          1.19    lukem options 	LKM		# Loadable kernel modules
     89          1.27       is options 	NKMEMCLUSTERS=256	# Size of kernel malloc area
     90          1.27       is options 	UCONSOLE	# anyone can redirect a virtual console
     91          1.27       is #options 	INSECURE	# allow, among other insecure stuff, LKM 
     92          1.32       is 				# loading in multi-user mode.
     93          1.27       is options 	SCSIVERBOSE	# Verbose SCSI errors
     94          1.27       is 
     95          1.27       is options 	NTP		# NTP phase/frequency locked loop
     96          1.27       is 
     97          1.27       is #Misc. debugging options
     98           1.1       is 
     99          1.19    lukem options 	DDB		# Kernel debugger
    100          1.19    lukem #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    101          1.27       is options 	DIAGNOSTIC	# Extra kernel sanity checks
    102          1.27       is #options 	DEBUG		# Enable misc. kernel debugging code
    103          1.19    lukem #options 	SYSCALL_DEBUG	# debug all syscalls.
    104          1.19    lukem #options 	SCSIDEBUG	# Add SCSI debugging statements
    105          1.19    lukem #options 	PANICBUTTON	# Forced crash via keypress (???)
    106           1.1       is 
    107          1.27       is #Amiga specific options
    108          1.27       is 
    109          1.30       is #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    110          1.32       is 				# first bank of RAM. (default: unlimited)
    111          1.27       is #options	NKPTADD=4	# set this for 4 additional KPT pages
    112          1.27       is #options	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    113          1.32       is 				# per 16 MB (1<<24 bytes) of RAM
    114          1.32       is                                 # define and decrease this, or define and
    115          1.32       is                                 # increase NKPTADD if you get "out of PT pages"
    116          1.32       is                                 # panics.
    117          1.32       is 
    118          1.27       is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    119          1.27       is #before the 10 secondinterval ends, or that KBDRESET does work at all.
    120          1.27       is #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    121          1.27       is 
    122          1.27       is #These options improve performance with the built-in serial port
    123          1.27       is #on slower Amigas.  Try the larger buffers first then lev6_defer.
    124          1.27       is #options 	SERIBUF_SIZE=4096
    125          1.27       is #options 	SEROBUF_SIZE=32
    126          1.27       is #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    127           1.1       is 
    128          1.19    lukem options 	RETINACONSOLE	# enable code to allow retina to be console
    129           1.1       is 
    130          1.27       is #options 	KFONT_8X11	# 8x11 font
    131           1.1       is 
    132          1.27       is #This is how you would tell the kernel the A2410 oscillator frequencies:
    133          1.32       is #The used frequencies are the defaults, and do not need option setting
    134          1.27       is #options 	ULOWELL_OSC1=36000000
    135          1.27       is #options 	ULOWELL_OSC2=66667000
    136          1.27       is 
    137          1.27       is #This is how you specify the blitting speed, higher values may speed up blits
    138          1.27       is #a littel bit.  If you raise this value too much some trash may appear.
    139          1.27       is #the commented version is the default.
    140          1.27       is #options 	RH_MEMCLK=61000000
    141          1.30       is #this option enables the 64 bit sprite which does not work
    142          1.27       is #for quite a few people.  E.g. The cursor sprite will turn to a block
    143          1.27       is #when moved to the top of the screen in X.
    144          1.19    lukem #options 	RH_64BIT_SPRITE
    145          1.27       is #enables fast scroll code appears to now work on 040 systems.
    146          1.19    lukem #options 	RETINA_SPEED_HACK
    147          1.27       is #enables the Hardwarecursor which does not work on some systems.
    148          1.27       is #options 	RH_HARDWARECURSOR
    149          1.27       is 
    150          1.27       is grfrh0		at zbus0		# retina III
    151           1.1       is 
    152           1.1       is grf2		at grfrh0
    153          1.27       is 
    154          1.30       is ite2		at grf2			# terminal emulators for grfs
    155           1.1       is 
    156          1.27       is msc0		at zbus0		# A2232 MSC multiport serial.
    157          1.27       is mfc0		at zbus0		# MultiFaceCard I/O board
    158          1.27       is mfcs0		at mfc0 unit 0		# MFC serial
    159          1.27       is mfcs1		at mfc0 unit 1		# MFC serial
    160           1.1       is #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    161           1.1       is #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    162           1.1       is #mfcs2		at mfc1 unit 0
    163           1.1       is #mfcs3		at mfc1 unit 1
    164           1.1       is #mfcp1		at mfc1 unit 0
    165          1.12       is 
    166  1.32.2.1.2.1  thorpej hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    167          1.27       is #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    168          1.27       is com*		at hyper? port ?	# Hypercom3/4 serial ports
    169  1.32.2.1.2.1  thorpej lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    170          1.27       is 
    171          1.27       is #DraCo Mainboard devices (sans keyboard)
    172          1.27       is 
    173          1.14       is drbbc0		at mainbus0		# DraCo battery backed clock
    174          1.15       is drsupio0	at mainbus0		# DraCo superio chip
    175          1.15       is com*		at drsupio? port ?	# DraCo serial
    176          1.17       is lpt0		at drsupio? port ?	# DraCo parallel
    177           1.1       is 
    178          1.27       is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    179          1.18       is 
    180          1.27       is #Ethernet cards:
    181          1.27       is le*		at zbus0		# A2065, Ameristar, Ariadne
    182          1.27       is ne*		at zbus0		# AriadneII
    183  1.32.2.1.2.1  thorpej ed*		at zbus0		# Hydra, ASDG LanRover
    184  1.32.2.1.2.1  thorpej es*		at zbus0		# CEI A4066 EthernetPLUS
    185  1.32.2.1.2.1  thorpej qn*		at zbus0		# Quicknet
    186           1.1       is 
    187          1.27       is bah*		at zbus0		# C=/Ameristar A2060 / 560
    188          1.27       is 
    189          1.27       is drsc0		at mainbus0		# DraCo scsi
    190           1.1       is scsibus*	at drsc0
    191           1.1       is 
    192          1.27       is #each hard drive from low target to high
    193          1.27       is #will configure to the next available sd unit number
    194           1.1       is sd*	at scsibus? target ? lun ?	# scsi disks
    195           1.1       is st*	at scsibus? target ? lun ?	# scsi tapes
    196          1.30       is cd*	at scsibus? target ? lun ?	# scsi cds
    197           1.4    veego ss*	at scsibus? target ? lun ?	# scsi scanner
    198           1.7    veego ch*	at scsibus? target ? lun ?	# scsi autochangers
    199           1.7    veego uk*	at scsibus? target ? lun ?	# scsi unknown
    200           1.1       is 
    201          1.27       is pseudo-device	loop			# loopback network interface
    202          1.27       is pseudo-device	sl		1	# SLIP network interfaces
    203          1.27       is pseudo-device	ppp		1	# PPP network interfaces
    204          1.27       is pseudo-device	tun		1	# network tunnel line discipline
    205          1.27       is #pseudo-device	gre		2	# generic L3 over IP tunnel
    206      1.32.2.1     tron #pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    207          1.27       is pseudo-device	bpfilter	16	# Berkeley packet filter
    208          1.27       is pseudo-device	ipfilter		# IP Filter package
    209          1.27       is 
    210  1.32.2.1.2.1  thorpej pseudo-device	view		4	# views (needed for grfcc)
    211          1.27       is pseudo-device	pty		16	# pseudo ptys
    212          1.27       is 
    213          1.27       is pseudo-device	vnd		4	# vnode pseudo-disks
    214          1.27       is pseudo-device	ccd		4	# concatenated disk devices
    215          1.27       is #pseudo-device	raid		4	# RAIDframe disk driver
    216          1.27       is 
    217          1.27       is #rnd is EXPERIMENTAL at this point.
    218          1.32       is #pseudo-device  rnd                     # /dev/random and in-kernel generator
    219          1.27       is #options        RND_COM                 # use "com" randomness as well (BROKEN)
    220           1.1       is 
    221           1.9  thorpej config	netbsd root on ? type ?
    222