Home | History | Annotate | Line # | Download | only in conf
DRACO revision 1.37
      1  1.28       is # $NetBSD: DRACO,v 1.37 1999/06/18 05:57:31 is Exp $
      2  1.28       is #
      3  1.27       is # This file was automatically created. Changes will be
      4  1.27       is # lost when running make in this directory.
      5   1.1       is #
      6  1.27       is # Created from: 
      7  1.37       is #$ NetBSD: GENERIC,v 1.125 1999/06/18 05:56:45 is Exp $
      8   1.1       is 
      9  1.21       is include "arch/amiga/conf/std.amiga"
     10   1.1       is 
     11   1.1       is maxusers	8
     12  1.19    lukem options 	RTC_OFFSET=0
     13   1.1       is 
     14  1.27       is #mainboards to support (in addition to Amiga)
     15  1.27       is 
     16  1.19    lukem options 	DRACO
     17   1.4    veego 
     18  1.27       is #processors this kernel should support
     19  1.27       is 
     20  1.27       is options 	M68060		# support for 060
     21  1.27       is options 	M060SP		# MC68060 software support (Required for 060)
     22   1.4    veego 
     23  1.27       is #Networking options
     24   1.1       is 
     25  1.19    lukem options 	INET		# IP networking support (Required)
     26  1.19    lukem #options 	GATEWAY		# Packet forwarding
     27  1.19    lukem #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     28  1.27       is #options 	MROUTING	# Multicast routing
     29  1.27       is options 	NS		# XNS
     30  1.27       is #options 	NSIP		# XNS tunneling over IP
     31  1.27       is options 	ISO,TPIP	# OSI
     32  1.27       is options 	EON		# OSI tunneling over IP
     33  1.27       is options 	CCITT,LLC,HDLC	# X.25
     34  1.27       is options 	NETATALK	# AppleTalk networking protocols
     35  1.27       is options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     36  1.27       is options 	PPP_DEFLATE	# Deflate compression support for PPP
     37  1.27       is options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     38  1.27       is options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     39  1.27       is options 	IPFILTER_LOG	# ipmon(8) log support
     40   1.1       is 
     41   1.9  thorpej file-system 	FFS		# Berkeley fast file system
     42  1.34     tron file-system 	EXT2FS		# second extended file system (linux)
     43  1.27       is #file-system 	LFS		# log-structured filesystem (experimental)
     44   1.9  thorpej file-system 	MFS		# Memory based filesystem
     45   1.9  thorpej file-system 	NFS		# Network File System client side code
     46   1.9  thorpej file-system 	ADOSFS		# AmigaDOS file system
     47  1.27       is file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
     48  1.27       is file-system 	MSDOSFS		# MS-DOS filesystem
     49  1.27       is file-system 	FDESC		# user file descriptor filesystem
     50  1.27       is file-system 	KERNFS		# kernel data-structure filesystem
     51  1.27       is file-system 	NULLFS		# loopback filesystem
     52   1.9  thorpej #file-system 	PORTAL		# Portal filesystem
     53  1.27       is file-system 	PROCFS		# /proc filesystem
     54  1.27       is file-system 	UMAPFS		# NULLFS + uid and gid remapping
     55  1.27       is file-system 	UNION		# union filesystem
     56  1.27       is 
     57  1.27       is #Filesystem options
     58  1.27       is options 	QUOTA		# User and group quotas in FFS
     59  1.27       is #options 	FFS_EI		# FFS Endian Independant support
     60  1.34     tron options 	NFSSERVER	# Network File System server side code
     61  1.34     tron #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
     62  1.34     tron 				# immutable) behave as system flags.
     63  1.27       is 
     64  1.27       is #Compatability options for various existing systems
     65  1.27       is 
     66  1.27       is options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
     67  1.27       is options 	COMPAT_43	# compatibility with 4.3BSD interfaces
     68  1.27       is options 	COMPAT_09	# compatibility with NetBSD 0.9
     69  1.27       is options 	COMPAT_10	# compatibility with NetBSD 1.0
     70  1.27       is options 	COMPAT_12	# compatibility with NetBSD 1.2
     71  1.27       is options 	COMPAT_13	# compatibility with NetBSD 1.3
     72  1.30       is options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
     73  1.34     tron options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
     74  1.27       is options 	COMPAT_NOMID	# allow nonvalid machine id executables
     75  1.30       is #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
     76  1.37       is options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
     77   1.1       is 
     78  1.27       is #Support for System V IPC facilities.
     79   1.1       is 
     80  1.19    lukem options 	SYSVSHM		# System V-like shared memory
     81  1.19    lukem options 	SYSVMSG		# System V-like messages
     82  1.19    lukem options 	SYSVSEM		# System V-like semaphores
     83   1.1       is 
     84  1.27       is #Support for various kernel options
     85  1.27       is 
     86  1.27       is options 	KTRACE		# system call tracing support
     87  1.19    lukem options 	LKM		# Loadable kernel modules
     88  1.27       is options 	NKMEMCLUSTERS=256	# Size of kernel malloc area
     89  1.27       is options 	UCONSOLE	# anyone can redirect a virtual console
     90  1.27       is #options 	INSECURE	# allow, among other insecure stuff, LKM 
     91  1.32       is 				# loading in multi-user mode.
     92  1.27       is options 	SCSIVERBOSE	# Verbose SCSI errors
     93  1.27       is 
     94  1.27       is options 	NTP		# NTP phase/frequency locked loop
     95  1.27       is 
     96  1.27       is #Misc. debugging options
     97   1.1       is 
     98  1.19    lukem options 	DDB		# Kernel debugger
     99  1.19    lukem #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    100  1.27       is options 	DIAGNOSTIC	# Extra kernel sanity checks
    101  1.27       is #options 	DEBUG		# Enable misc. kernel debugging code
    102  1.19    lukem #options 	SYSCALL_DEBUG	# debug all syscalls.
    103  1.19    lukem #options 	SCSIDEBUG	# Add SCSI debugging statements
    104  1.19    lukem #options 	PANICBUTTON	# Forced crash via keypress (???)
    105   1.1       is 
    106  1.27       is #Amiga specific options
    107  1.27       is 
    108  1.30       is #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    109  1.32       is 				# first bank of RAM. (default: unlimited)
    110  1.27       is #options	NKPTADD=4	# set this for 4 additional KPT pages
    111  1.27       is #options	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    112  1.32       is 				# per 16 MB (1<<24 bytes) of RAM
    113  1.32       is                                 # define and decrease this, or define and
    114  1.32       is                                 # increase NKPTADD if you get "out of PT pages"
    115  1.32       is                                 # panics.
    116  1.32       is 
    117  1.27       is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    118  1.27       is #before the 10 secondinterval ends, or that KBDRESET does work at all.
    119  1.27       is #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    120  1.27       is 
    121  1.27       is #These options improve performance with the built-in serial port
    122  1.27       is #on slower Amigas.  Try the larger buffers first then lev6_defer.
    123  1.27       is #options 	SERIBUF_SIZE=4096
    124  1.27       is #options 	SEROBUF_SIZE=32
    125  1.27       is #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    126   1.1       is 
    127  1.19    lukem options 	RETINACONSOLE	# enable code to allow retina to be console
    128   1.1       is 
    129  1.27       is #options 	KFONT_8X11	# 8x11 font
    130   1.1       is 
    131  1.27       is #This is how you would tell the kernel the A2410 oscillator frequencies:
    132  1.32       is #The used frequencies are the defaults, and do not need option setting
    133  1.27       is #options 	ULOWELL_OSC1=36000000
    134  1.27       is #options 	ULOWELL_OSC2=66667000
    135  1.27       is 
    136  1.27       is #This is how you specify the blitting speed, higher values may speed up blits
    137  1.27       is #a littel bit.  If you raise this value too much some trash may appear.
    138  1.27       is #the commented version is the default.
    139  1.27       is #options 	RH_MEMCLK=61000000
    140  1.30       is #this option enables the 64 bit sprite which does not work
    141  1.27       is #for quite a few people.  E.g. The cursor sprite will turn to a block
    142  1.27       is #when moved to the top of the screen in X.
    143  1.19    lukem #options 	RH_64BIT_SPRITE
    144  1.27       is #enables fast scroll code appears to now work on 040 systems.
    145  1.19    lukem #options 	RETINA_SPEED_HACK
    146  1.27       is #enables the Hardwarecursor which does not work on some systems.
    147  1.27       is #options 	RH_HARDWARECURSOR
    148  1.27       is 
    149  1.27       is grfrh0		at zbus0		# retina III
    150   1.1       is 
    151   1.1       is grf2		at grfrh0
    152  1.27       is 
    153  1.30       is ite2		at grf2			# terminal emulators for grfs
    154   1.1       is 
    155  1.27       is msc0		at zbus0		# A2232 MSC multiport serial.
    156  1.27       is mfc0		at zbus0		# MultiFaceCard I/O board
    157  1.27       is mfcs0		at mfc0 unit 0		# MFC serial
    158  1.27       is mfcs1		at mfc0 unit 1		# MFC serial
    159   1.1       is #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    160   1.1       is #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    161   1.1       is #mfcs2		at mfc1 unit 0
    162   1.1       is #mfcs3		at mfc1 unit 1
    163   1.1       is #mfcp1		at mfc1 unit 0
    164  1.12       is 
    165  1.35       is hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    166  1.27       is #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    167  1.27       is com*		at hyper? port ?	# Hypercom3/4 serial ports
    168  1.35       is lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    169  1.27       is 
    170  1.27       is #DraCo Mainboard devices (sans keyboard)
    171  1.27       is 
    172  1.14       is drbbc0		at mainbus0		# DraCo battery backed clock
    173  1.15       is drsupio0	at mainbus0		# DraCo superio chip
    174  1.15       is com*		at drsupio? port ?	# DraCo serial
    175  1.17       is lpt0		at drsupio? port ?	# DraCo parallel
    176   1.1       is 
    177  1.27       is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    178  1.18       is 
    179  1.27       is #Ethernet cards:
    180  1.27       is le*		at zbus0		# A2065, Ameristar, Ariadne
    181  1.27       is ne*		at zbus0		# AriadneII
    182  1.36       is ed*		at zbus0		# Hydra, ASDG LanRover
    183  1.36       is es*		at zbus0		# CEI A4066 EthernetPLUS
    184  1.36       is qn*		at zbus0		# Quicknet
    185   1.1       is 
    186  1.27       is bah*		at zbus0		# C=/Ameristar A2060 / 560
    187   1.1       is 
    188  1.27       is #Greater Valley Product Bus
    189  1.27       is gvpbus* 	at zbus0
    190  1.27       is 
    191  1.27       is drsc0		at mainbus0		# DraCo scsi
    192   1.1       is scsibus*	at drsc0
    193   1.1       is 
    194  1.27       is #each hard drive from low target to high
    195  1.27       is #will configure to the next available sd unit number
    196   1.1       is sd*	at scsibus? target ? lun ?	# scsi disks
    197   1.1       is st*	at scsibus? target ? lun ?	# scsi tapes
    198  1.30       is cd*	at scsibus? target ? lun ?	# scsi cds
    199   1.4    veego ss*	at scsibus? target ? lun ?	# scsi scanner
    200   1.7    veego ch*	at scsibus? target ? lun ?	# scsi autochangers
    201   1.7    veego uk*	at scsibus? target ? lun ?	# scsi unknown
    202   1.1       is 
    203  1.27       is pseudo-device	loop			# loopback network interface
    204  1.27       is pseudo-device	sl		1	# SLIP network interfaces
    205  1.27       is pseudo-device	ppp		1	# PPP network interfaces
    206  1.27       is pseudo-device	tun		1	# network tunnel line discipline
    207  1.27       is #pseudo-device	gre		2	# generic L3 over IP tunnel
    208  1.33     tron #pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    209  1.27       is pseudo-device	bpfilter	16	# Berkeley packet filter
    210  1.27       is pseudo-device	ipfilter		# IP Filter package
    211  1.27       is 
    212  1.27       is pseudo-device	view		10	# views
    213  1.27       is pseudo-device	pty		16	# pseudo ptys
    214  1.27       is 
    215  1.27       is pseudo-device	vnd		4	# vnode pseudo-disks
    216  1.27       is pseudo-device	ccd		4	# concatenated disk devices
    217  1.27       is #pseudo-device	raid		4	# RAIDframe disk driver
    218  1.27       is 
    219  1.27       is #rnd is EXPERIMENTAL at this point.
    220  1.32       is #pseudo-device  rnd                     # /dev/random and in-kernel generator
    221  1.27       is #options        RND_COM                 # use "com" randomness as well (BROKEN)
    222   1.1       is 
    223   1.9  thorpej config	netbsd root on ? type ?
    224