Home | History | Annotate | Line # | Download | only in conf
DRACO revision 1.40.2.1
      1  1.40.2.1  wrstuden # $NetBSD: DRACO,v 1.40.2.1 1999/12/27 18:31:33 wrstuden Exp $
      2      1.28        is #
      3      1.27        is # This file was automatically created. Changes will be
      4      1.27        is # lost when running make in this directory.
      5       1.1        is #
      6      1.27        is # Created from: 
      7  1.40.2.1  wrstuden #$ NetBSD: GENERIC,v 1.129 1999/10/15 21:50:34 is Exp $
      8       1.1        is 
      9      1.21        is include "arch/amiga/conf/std.amiga"
     10       1.1        is 
     11       1.1        is maxusers	8
     12      1.19     lukem options 	RTC_OFFSET=0
     13       1.1        is 
     14      1.27        is #mainboards to support (in addition to Amiga)
     15      1.27        is 
     16      1.19     lukem options 	DRACO
     17       1.4     veego 
     18      1.27        is #processors this kernel should support
     19      1.27        is 
     20      1.27        is options 	M68060		# support for 060
     21      1.27        is options 	M060SP		# MC68060 software support (Required for 060)
     22       1.4     veego 
     23      1.27        is #Networking options
     24       1.1        is 
     25      1.19     lukem options 	INET		# IP networking support (Required)
     26      1.19     lukem #options 	GATEWAY		# Packet forwarding
     27      1.19     lukem #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     28      1.27        is #options 	MROUTING	# Multicast routing
     29      1.27        is options 	NS		# XNS
     30      1.27        is #options 	NSIP		# XNS tunneling over IP
     31      1.27        is options 	ISO,TPIP	# OSI
     32      1.27        is options 	EON		# OSI tunneling over IP
     33      1.27        is options 	CCITT,LLC,HDLC	# X.25
     34      1.27        is options 	NETATALK	# AppleTalk networking protocols
     35      1.27        is options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     36      1.27        is options 	PPP_DEFLATE	# Deflate compression support for PPP
     37      1.27        is options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     38      1.27        is options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     39      1.27        is options 	IPFILTER_LOG	# ipmon(8) log support
     40       1.1        is 
     41       1.9   thorpej file-system 	FFS		# Berkeley fast file system
     42      1.34      tron file-system 	EXT2FS		# second extended file system (linux)
     43      1.27        is #file-system 	LFS		# log-structured filesystem (experimental)
     44       1.9   thorpej file-system 	MFS		# Memory based filesystem
     45       1.9   thorpej file-system 	NFS		# Network File System client side code
     46       1.9   thorpej file-system 	ADOSFS		# AmigaDOS file system
     47      1.27        is file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
     48      1.27        is file-system 	MSDOSFS		# MS-DOS filesystem
     49      1.27        is file-system 	FDESC		# user file descriptor filesystem
     50      1.27        is file-system 	KERNFS		# kernel data-structure filesystem
     51      1.27        is file-system 	NULLFS		# loopback filesystem
     52       1.9   thorpej #file-system 	PORTAL		# Portal filesystem
     53      1.27        is file-system 	PROCFS		# /proc filesystem
     54      1.27        is file-system 	UMAPFS		# NULLFS + uid and gid remapping
     55      1.27        is file-system 	UNION		# union filesystem
     56      1.27        is 
     57      1.27        is #Filesystem options
     58      1.27        is options 	QUOTA		# User and group quotas in FFS
     59      1.27        is #options 	FFS_EI		# FFS Endian Independant support
     60      1.34      tron options 	NFSSERVER	# Network File System server side code
     61      1.34      tron #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
     62      1.34      tron 				# immutable) behave as system flags.
     63      1.27        is 
     64      1.27        is #Compatability options for various existing systems
     65      1.27        is 
     66      1.27        is options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
     67      1.27        is options 	COMPAT_43	# compatibility with 4.3BSD interfaces
     68      1.27        is options 	COMPAT_09	# compatibility with NetBSD 0.9
     69      1.27        is options 	COMPAT_10	# compatibility with NetBSD 1.0
     70      1.27        is options 	COMPAT_12	# compatibility with NetBSD 1.2
     71      1.27        is options 	COMPAT_13	# compatibility with NetBSD 1.3
     72      1.40  augustss options 	COMPAT_14	# compatibility with NetBSD 1.4
     73      1.30        is options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
     74      1.34      tron options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
     75      1.27        is options 	COMPAT_NOMID	# allow nonvalid machine id executables
     76      1.30        is #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
     77      1.37        is options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
     78       1.1        is 
     79      1.27        is #Support for System V IPC facilities.
     80       1.1        is 
     81      1.19     lukem options 	SYSVSHM		# System V-like shared memory
     82      1.19     lukem options 	SYSVMSG		# System V-like messages
     83      1.19     lukem options 	SYSVSEM		# System V-like semaphores
     84       1.1        is 
     85      1.27        is #Support for various kernel options
     86      1.27        is 
     87      1.27        is options 	KTRACE		# system call tracing support
     88      1.19     lukem options 	LKM		# Loadable kernel modules
     89      1.27        is options 	NKMEMCLUSTERS=256	# Size of kernel malloc area
     90      1.27        is options 	UCONSOLE	# anyone can redirect a virtual console
     91      1.27        is #options 	INSECURE	# allow, among other insecure stuff, LKM 
     92      1.32        is 				# loading in multi-user mode.
     93      1.27        is options 	SCSIVERBOSE	# Verbose SCSI errors
     94      1.27        is 
     95      1.27        is options 	NTP		# NTP phase/frequency locked loop
     96      1.27        is 
     97      1.27        is #Misc. debugging options
     98       1.1        is 
     99      1.19     lukem options 	DDB		# Kernel debugger
    100      1.19     lukem #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    101      1.27        is options 	DIAGNOSTIC	# Extra kernel sanity checks
    102      1.27        is #options 	DEBUG		# Enable misc. kernel debugging code
    103      1.19     lukem #options 	SYSCALL_DEBUG	# debug all syscalls.
    104      1.19     lukem #options 	SCSIDEBUG	# Add SCSI debugging statements
    105      1.19     lukem #options 	PANICBUTTON	# Forced crash via keypress (???)
    106       1.1        is 
    107      1.27        is #Amiga specific options
    108      1.27        is 
    109      1.30        is #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    110      1.32        is 				# first bank of RAM. (default: unlimited)
    111      1.27        is #options	NKPTADD=4	# set this for 4 additional KPT pages
    112      1.27        is #options	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    113      1.32        is 				# per 16 MB (1<<24 bytes) of RAM
    114      1.32        is                                 # define and decrease this, or define and
    115      1.32        is                                 # increase NKPTADD if you get "out of PT pages"
    116      1.32        is                                 # panics.
    117      1.32        is 
    118      1.27        is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    119      1.27        is #before the 10 secondinterval ends, or that KBDRESET does work at all.
    120      1.27        is #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    121      1.27        is 
    122      1.27        is #These options improve performance with the built-in serial port
    123      1.27        is #on slower Amigas.  Try the larger buffers first then lev6_defer.
    124      1.27        is #options 	SERIBUF_SIZE=4096
    125      1.27        is #options 	SEROBUF_SIZE=32
    126      1.27        is #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    127       1.1        is 
    128      1.19     lukem options 	RETINACONSOLE	# enable code to allow retina to be console
    129       1.1        is 
    130      1.27        is #options 	KFONT_8X11	# 8x11 font
    131       1.1        is 
    132      1.27        is #This is how you would tell the kernel the A2410 oscillator frequencies:
    133      1.32        is #The used frequencies are the defaults, and do not need option setting
    134      1.27        is #options 	ULOWELL_OSC1=36000000
    135      1.27        is #options 	ULOWELL_OSC2=66667000
    136      1.27        is 
    137      1.27        is #This is how you specify the blitting speed, higher values may speed up blits
    138      1.27        is #a littel bit.  If you raise this value too much some trash may appear.
    139      1.27        is #the commented version is the default.
    140      1.27        is #options 	RH_MEMCLK=61000000
    141      1.30        is #this option enables the 64 bit sprite which does not work
    142      1.27        is #for quite a few people.  E.g. The cursor sprite will turn to a block
    143      1.27        is #when moved to the top of the screen in X.
    144      1.19     lukem #options 	RH_64BIT_SPRITE
    145      1.27        is #enables fast scroll code appears to now work on 040 systems.
    146      1.19     lukem #options 	RETINA_SPEED_HACK
    147      1.27        is #enables the Hardwarecursor which does not work on some systems.
    148      1.27        is #options 	RH_HARDWARECURSOR
    149      1.27        is 
    150      1.27        is grfrh0		at zbus0		# retina III
    151       1.1        is 
    152       1.1        is grf2		at grfrh0
    153      1.27        is 
    154      1.30        is ite2		at grf2			# terminal emulators for grfs
    155       1.1        is 
    156      1.27        is msc0		at zbus0		# A2232 MSC multiport serial.
    157      1.27        is mfc0		at zbus0		# MultiFaceCard I/O board
    158      1.27        is mfcs0		at mfc0 unit 0		# MFC serial
    159      1.27        is mfcs1		at mfc0 unit 1		# MFC serial
    160       1.1        is #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    161       1.1        is #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    162       1.1        is #mfcs2		at mfc1 unit 0
    163       1.1        is #mfcs3		at mfc1 unit 1
    164       1.1        is #mfcp1		at mfc1 unit 0
    165      1.12        is 
    166      1.35        is hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    167      1.27        is #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    168      1.27        is com*		at hyper? port ?	# Hypercom3/4 serial ports
    169      1.35        is lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    170      1.27        is 
    171      1.27        is #DraCo Mainboard devices (sans keyboard)
    172      1.27        is 
    173      1.14        is drbbc0		at mainbus0		# DraCo battery backed clock
    174      1.15        is drsupio0	at mainbus0		# DraCo superio chip
    175      1.15        is com*		at drsupio? port ?	# DraCo serial
    176      1.17        is lpt0		at drsupio? port ?	# DraCo parallel
    177       1.1        is 
    178      1.27        is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    179      1.18        is 
    180      1.27        is #Ethernet cards:
    181      1.27        is le*		at zbus0		# A2065, Ameristar, Ariadne
    182      1.27        is ne*		at zbus0		# AriadneII
    183      1.36        is ed*		at zbus0		# Hydra, ASDG LanRover
    184      1.36        is es*		at zbus0		# CEI A4066 EthernetPLUS
    185      1.36        is qn*		at zbus0		# Quicknet
    186       1.1        is 
    187      1.27        is bah*		at zbus0		# C=/Ameristar A2060 / 560
    188      1.27        is 
    189      1.27        is drsc0		at mainbus0		# DraCo scsi
    190       1.1        is scsibus*	at drsc0
    191       1.1        is 
    192      1.27        is #each hard drive from low target to high
    193      1.27        is #will configure to the next available sd unit number
    194       1.1        is sd*	at scsibus? target ? lun ?	# scsi disks
    195       1.1        is st*	at scsibus? target ? lun ?	# scsi tapes
    196      1.30        is cd*	at scsibus? target ? lun ?	# scsi cds
    197       1.4     veego ss*	at scsibus? target ? lun ?	# scsi scanner
    198       1.7     veego ch*	at scsibus? target ? lun ?	# scsi autochangers
    199       1.7     veego uk*	at scsibus? target ? lun ?	# scsi unknown
    200       1.1        is 
    201      1.27        is pseudo-device	loop			# loopback network interface
    202      1.27        is pseudo-device	sl		1	# SLIP network interfaces
    203      1.27        is pseudo-device	ppp		1	# PPP network interfaces
    204      1.27        is pseudo-device	tun		1	# network tunnel line discipline
    205      1.27        is #pseudo-device	gre		2	# generic L3 over IP tunnel
    206      1.33      tron #pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    207      1.27        is pseudo-device	bpfilter	16	# Berkeley packet filter
    208      1.27        is pseudo-device	ipfilter		# IP Filter package
    209      1.27        is 
    210      1.38        is pseudo-device	view		4	# views (needed for grfcc)
    211      1.27        is pseudo-device	pty		16	# pseudo ptys
    212      1.27        is 
    213      1.27        is pseudo-device	vnd		4	# vnode pseudo-disks
    214      1.27        is pseudo-device	ccd		4	# concatenated disk devices
    215      1.27        is #pseudo-device	raid		4	# RAIDframe disk driver
    216      1.27        is 
    217      1.27        is #rnd is EXPERIMENTAL at this point.
    218      1.32        is #pseudo-device  rnd                     # /dev/random and in-kernel generator
    219      1.27        is #options        RND_COM                 # use "com" randomness as well (BROKEN)
    220       1.1        is 
    221       1.9   thorpej config	netbsd root on ? type ?
    222