DRACO revision 1.41
1 1.41 is # $NetBSD: DRACO,v 1.41 1999/10/15 21:54:43 is Exp $ 2 1.28 is # 3 1.27 is # This file was automatically created. Changes will be 4 1.27 is # lost when running make in this directory. 5 1.1 is # 6 1.27 is # Created from: 7 1.41 is #$ NetBSD: GENERIC,v 1.129 1999/10/15 21:50:34 is Exp $ 8 1.1 is 9 1.21 is include "arch/amiga/conf/std.amiga" 10 1.1 is 11 1.1 is maxusers 8 12 1.19 lukem options RTC_OFFSET=0 13 1.1 is 14 1.27 is #mainboards to support (in addition to Amiga) 15 1.27 is 16 1.19 lukem options DRACO 17 1.4 veego 18 1.27 is #processors this kernel should support 19 1.27 is 20 1.27 is options M68060 # support for 060 21 1.27 is options M060SP # MC68060 software support (Required for 060) 22 1.4 veego 23 1.27 is #Networking options 24 1.1 is 25 1.19 lukem options INET # IP networking support (Required) 26 1.19 lukem #options GATEWAY # Packet forwarding 27 1.19 lukem #options DIRECTED_BROADCAST # Broadcast across subnets 28 1.27 is #options MROUTING # Multicast routing 29 1.27 is options NS # XNS 30 1.27 is #options NSIP # XNS tunneling over IP 31 1.27 is options ISO,TPIP # OSI 32 1.27 is options EON # OSI tunneling over IP 33 1.27 is options CCITT,LLC,HDLC # X.25 34 1.27 is options NETATALK # AppleTalk networking protocols 35 1.27 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 36 1.27 is options PPP_DEFLATE # Deflate compression support for PPP 37 1.27 is options PPP_FILTER # Active filter support for PPP (requires bpf) 38 1.27 is options PFIL_HOOKS # pfil(9) packet filter hooks 39 1.27 is options IPFILTER_LOG # ipmon(8) log support 40 1.1 is 41 1.9 thorpej file-system FFS # Berkeley fast file system 42 1.34 tron file-system EXT2FS # second extended file system (linux) 43 1.27 is #file-system LFS # log-structured filesystem (experimental) 44 1.9 thorpej file-system MFS # Memory based filesystem 45 1.9 thorpej file-system NFS # Network File System client side code 46 1.9 thorpej file-system ADOSFS # AmigaDOS file system 47 1.27 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 48 1.27 is file-system MSDOSFS # MS-DOS filesystem 49 1.27 is file-system FDESC # user file descriptor filesystem 50 1.27 is file-system KERNFS # kernel data-structure filesystem 51 1.27 is file-system NULLFS # loopback filesystem 52 1.9 thorpej #file-system PORTAL # Portal filesystem 53 1.27 is file-system PROCFS # /proc filesystem 54 1.27 is file-system UMAPFS # NULLFS + uid and gid remapping 55 1.27 is file-system UNION # union filesystem 56 1.27 is 57 1.27 is #Filesystem options 58 1.27 is options QUOTA # User and group quotas in FFS 59 1.27 is #options FFS_EI # FFS Endian Independant support 60 1.34 tron options NFSSERVER # Network File System server side code 61 1.34 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 62 1.34 tron # immutable) behave as system flags. 63 1.27 is 64 1.27 is #Compatability options for various existing systems 65 1.27 is 66 1.27 is options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 67 1.27 is options COMPAT_43 # compatibility with 4.3BSD interfaces 68 1.27 is options COMPAT_09 # compatibility with NetBSD 0.9 69 1.27 is options COMPAT_10 # compatibility with NetBSD 1.0 70 1.27 is options COMPAT_12 # compatibility with NetBSD 1.2 71 1.27 is options COMPAT_13 # compatibility with NetBSD 1.3 72 1.40 augustss options COMPAT_14 # compatibility with NetBSD 1.4 73 1.30 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 74 1.34 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 75 1.27 is options COMPAT_NOMID # allow nonvalid machine id executables 76 1.30 is #options COMPAT_LINUX # Support to run Linux/m68k executables 77 1.37 is options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 78 1.1 is 79 1.27 is #Support for System V IPC facilities. 80 1.1 is 81 1.19 lukem options SYSVSHM # System V-like shared memory 82 1.19 lukem options SYSVMSG # System V-like messages 83 1.19 lukem options SYSVSEM # System V-like semaphores 84 1.1 is 85 1.27 is #Support for various kernel options 86 1.27 is 87 1.27 is options KTRACE # system call tracing support 88 1.19 lukem options LKM # Loadable kernel modules 89 1.27 is options NKMEMCLUSTERS=256 # Size of kernel malloc area 90 1.27 is options UCONSOLE # anyone can redirect a virtual console 91 1.27 is #options INSECURE # allow, among other insecure stuff, LKM 92 1.32 is # loading in multi-user mode. 93 1.27 is options SCSIVERBOSE # Verbose SCSI errors 94 1.27 is 95 1.27 is options NTP # NTP phase/frequency locked loop 96 1.27 is 97 1.27 is #Misc. debugging options 98 1.1 is 99 1.19 lukem options DDB # Kernel debugger 100 1.19 lukem #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 101 1.27 is options DIAGNOSTIC # Extra kernel sanity checks 102 1.27 is #options DEBUG # Enable misc. kernel debugging code 103 1.19 lukem #options SYSCALL_DEBUG # debug all syscalls. 104 1.19 lukem #options SCSIDEBUG # Add SCSI debugging statements 105 1.19 lukem #options PANICBUTTON # Forced crash via keypress (???) 106 1.1 is 107 1.27 is #Amiga specific options 108 1.27 is 109 1.30 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 110 1.32 is # first bank of RAM. (default: unlimited) 111 1.27 is #options NKPTADD=4 # set this for 4 additional KPT pages 112 1.27 is #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 113 1.32 is # per 16 MB (1<<24 bytes) of RAM 114 1.32 is # define and decrease this, or define and 115 1.32 is # increase NKPTADD if you get "out of PT pages" 116 1.32 is # panics. 117 1.32 is 118 1.27 is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 119 1.27 is #before the 10 secondinterval ends, or that KBDRESET does work at all. 120 1.27 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 121 1.27 is 122 1.27 is #These options improve performance with the built-in serial port 123 1.27 is #on slower Amigas. Try the larger buffers first then lev6_defer. 124 1.27 is #options SERIBUF_SIZE=4096 125 1.27 is #options SEROBUF_SIZE=32 126 1.27 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 127 1.1 is 128 1.19 lukem options RETINACONSOLE # enable code to allow retina to be console 129 1.1 is 130 1.27 is #options KFONT_8X11 # 8x11 font 131 1.1 is 132 1.27 is #This is how you would tell the kernel the A2410 oscillator frequencies: 133 1.32 is #The used frequencies are the defaults, and do not need option setting 134 1.27 is #options ULOWELL_OSC1=36000000 135 1.27 is #options ULOWELL_OSC2=66667000 136 1.27 is 137 1.27 is #This is how you specify the blitting speed, higher values may speed up blits 138 1.27 is #a littel bit. If you raise this value too much some trash may appear. 139 1.27 is #the commented version is the default. 140 1.27 is #options RH_MEMCLK=61000000 141 1.30 is #this option enables the 64 bit sprite which does not work 142 1.27 is #for quite a few people. E.g. The cursor sprite will turn to a block 143 1.27 is #when moved to the top of the screen in X. 144 1.19 lukem #options RH_64BIT_SPRITE 145 1.27 is #enables fast scroll code appears to now work on 040 systems. 146 1.19 lukem #options RETINA_SPEED_HACK 147 1.27 is #enables the Hardwarecursor which does not work on some systems. 148 1.27 is #options RH_HARDWARECURSOR 149 1.27 is 150 1.27 is grfrh0 at zbus0 # retina III 151 1.1 is 152 1.1 is grf2 at grfrh0 153 1.27 is 154 1.30 is ite2 at grf2 # terminal emulators for grfs 155 1.1 is 156 1.27 is msc0 at zbus0 # A2232 MSC multiport serial. 157 1.27 is mfc0 at zbus0 # MultiFaceCard I/O board 158 1.27 is mfcs0 at mfc0 unit 0 # MFC serial 159 1.27 is mfcs1 at mfc0 unit 1 # MFC serial 160 1.1 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 161 1.1 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 162 1.1 is #mfcs2 at mfc1 unit 0 163 1.1 is #mfcs3 at mfc1 unit 1 164 1.1 is #mfcp1 at mfc1 unit 0 165 1.12 is 166 1.35 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 167 1.27 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 168 1.27 is com* at hyper? port ? # Hypercom3/4 serial ports 169 1.35 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 170 1.27 is 171 1.27 is #DraCo Mainboard devices (sans keyboard) 172 1.27 is 173 1.14 is drbbc0 at mainbus0 # DraCo battery backed clock 174 1.15 is drsupio0 at mainbus0 # DraCo superio chip 175 1.15 is com* at drsupio? port ? # DraCo serial 176 1.17 is lpt0 at drsupio? port ? # DraCo parallel 177 1.1 is 178 1.27 is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 179 1.18 is 180 1.27 is #Ethernet cards: 181 1.27 is le* at zbus0 # A2065, Ameristar, Ariadne 182 1.27 is ne* at zbus0 # AriadneII 183 1.36 is ed* at zbus0 # Hydra, ASDG LanRover 184 1.36 is es* at zbus0 # CEI A4066 EthernetPLUS 185 1.36 is qn* at zbus0 # Quicknet 186 1.1 is 187 1.27 is bah* at zbus0 # C=/Ameristar A2060 / 560 188 1.27 is 189 1.27 is drsc0 at mainbus0 # DraCo scsi 190 1.1 is scsibus* at drsc0 191 1.1 is 192 1.27 is #each hard drive from low target to high 193 1.27 is #will configure to the next available sd unit number 194 1.1 is sd* at scsibus? target ? lun ? # scsi disks 195 1.1 is st* at scsibus? target ? lun ? # scsi tapes 196 1.30 is cd* at scsibus? target ? lun ? # scsi cds 197 1.4 veego ss* at scsibus? target ? lun ? # scsi scanner 198 1.7 veego ch* at scsibus? target ? lun ? # scsi autochangers 199 1.7 veego uk* at scsibus? target ? lun ? # scsi unknown 200 1.1 is 201 1.27 is pseudo-device loop # loopback network interface 202 1.27 is pseudo-device sl 1 # SLIP network interfaces 203 1.27 is pseudo-device ppp 1 # PPP network interfaces 204 1.27 is pseudo-device tun 1 # network tunnel line discipline 205 1.27 is #pseudo-device gre 2 # generic L3 over IP tunnel 206 1.33 tron #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 207 1.27 is pseudo-device bpfilter 16 # Berkeley packet filter 208 1.27 is pseudo-device ipfilter # IP Filter package 209 1.27 is 210 1.38 is pseudo-device view 4 # views (needed for grfcc) 211 1.27 is pseudo-device pty 16 # pseudo ptys 212 1.27 is 213 1.27 is pseudo-device vnd 4 # vnode pseudo-disks 214 1.27 is pseudo-device ccd 4 # concatenated disk devices 215 1.27 is #pseudo-device raid 4 # RAIDframe disk driver 216 1.27 is 217 1.27 is #rnd is EXPERIMENTAL at this point. 218 1.32 is #pseudo-device rnd # /dev/random and in-kernel generator 219 1.27 is #options RND_COM # use "com" randomness as well (BROKEN) 220 1.1 is 221 1.9 thorpej config netbsd root on ? type ? 222
Indexes created Wed Oct 01 12:09:54 GMT 2025