DRACO revision 1.49
1 1.49 jdolecek # $NetBSD: DRACO,v 1.49 2000/09/24 15:59:27 jdolecek Exp $ 2 1.28 is # 3 1.27 is # This file was automatically created. Changes will be 4 1.27 is # lost when running make in this directory. 5 1.1 is # 6 1.27 is # Created from: 7 1.47 sommerfe #$ NetBSD: GENERIC,v 1.146 2000/07/05 04:07:24 sommerfeld Exp $ 8 1.1 is 9 1.21 is include "arch/amiga/conf/std.amiga" 10 1.43 mhitch 11 1.49 jdolecek #ident "GENERIC-$Revision: 1.49 $" 12 1.1 is 13 1.1 is maxusers 8 14 1.19 lukem options RTC_OFFSET=0 15 1.1 is 16 1.27 is #mainboards to support (in addition to Amiga) 17 1.27 is 18 1.19 lukem options DRACO 19 1.4 veego 20 1.27 is #processors this kernel should support 21 1.27 is 22 1.27 is options M68060 # support for 060 23 1.27 is options M060SP # MC68060 software support (Required for 060) 24 1.1 is 25 1.47 sommerfe #Networking options 26 1.47 sommerfe 27 1.19 lukem options INET # IP networking support (Required) 28 1.42 is options INET6 # IPV6 29 1.42 is #options IPSEC # IP security 30 1.42 is #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 31 1.42 is #options IPSEC_DEBUG # debug for IP security 32 1.19 lukem #options GATEWAY # Packet forwarding 33 1.19 lukem #options DIRECTED_BROADCAST # Broadcast across subnets 34 1.45 is 35 1.27 is #options MROUTING # Multicast routing 36 1.27 is options NS # XNS 37 1.27 is #options NSIP # XNS tunneling over IP 38 1.27 is options ISO,TPIP # OSI 39 1.47 sommerfe #options EON # OSI tunneling over IP 40 1.27 is options CCITT,LLC,HDLC # X.25 41 1.27 is options NETATALK # AppleTalk networking protocols 42 1.45 is 43 1.27 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 44 1.27 is options PPP_DEFLATE # Deflate compression support for PPP 45 1.27 is options PPP_FILTER # Active filter support for PPP (requires bpf) 46 1.27 is options PFIL_HOOKS # pfil(9) packet filter hooks 47 1.27 is options IPFILTER_LOG # ipmon(8) log support 48 1.1 is 49 1.9 thorpej file-system FFS # Berkeley fast file system 50 1.34 tron file-system EXT2FS # second extended file system (linux) 51 1.27 is #file-system LFS # log-structured filesystem (experimental) 52 1.45 is 53 1.9 thorpej file-system MFS # Memory based filesystem 54 1.45 is 55 1.9 thorpej file-system NFS # Network File System client side code 56 1.9 thorpej file-system ADOSFS # AmigaDOS file system 57 1.27 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 58 1.27 is file-system MSDOSFS # MS-DOS filesystem 59 1.45 is 60 1.45 is file-system KERNFS # kernel data-structure filesystem 61 1.45 is 62 1.27 is file-system FDESC # user file descriptor filesystem 63 1.27 is file-system NULLFS # loopback filesystem 64 1.42 is file-system OVERLAY # overlay filesystem 65 1.9 thorpej #file-system PORTAL # Portal filesystem 66 1.27 is file-system PROCFS # /proc filesystem 67 1.27 is file-system UMAPFS # NULLFS + uid and gid remapping 68 1.27 is file-system UNION # union filesystem 69 1.27 is 70 1.27 is #Filesystem options 71 1.45 is 72 1.45 is #options FFS_EI # FFS Endian Independant support 73 1.45 is 74 1.27 is options QUOTA # User and group quotas in FFS 75 1.47 sommerfe options SOFTDEP # FFS soft updates support. 76 1.34 tron options NFSSERVER # Network File System server side code 77 1.45 is 78 1.34 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 79 1.34 tron # immutable) behave as system flags. 80 1.27 is 81 1.27 is #Compatability options for various existing systems 82 1.27 is 83 1.27 is options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 84 1.27 is options COMPAT_43 # compatibility with 4.3BSD interfaces 85 1.27 is options COMPAT_09 # compatibility with NetBSD 0.9 86 1.27 is options COMPAT_10 # compatibility with NetBSD 1.0 87 1.27 is options COMPAT_12 # compatibility with NetBSD 1.2 88 1.27 is options COMPAT_13 # compatibility with NetBSD 1.3 89 1.40 augustss options COMPAT_14 # compatibility with NetBSD 1.4 90 1.30 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 91 1.34 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 92 1.27 is options COMPAT_NOMID # allow nonvalid machine id executables 93 1.30 is #options COMPAT_LINUX # Support to run Linux/m68k executables 94 1.37 is options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 95 1.1 is 96 1.27 is #Support for System V IPC facilities. 97 1.1 is 98 1.19 lukem options SYSVSHM # System V-like shared memory 99 1.19 lukem options SYSVMSG # System V-like messages 100 1.19 lukem options SYSVSEM # System V-like semaphores 101 1.1 is 102 1.27 is #Support for various kernel options 103 1.27 is 104 1.27 is options KTRACE # system call tracing support 105 1.19 lukem options LKM # Loadable kernel modules 106 1.27 is options UCONSOLE # anyone can redirect a virtual console 107 1.45 is 108 1.27 is #options INSECURE # allow, among other insecure stuff, LKM 109 1.32 is # loading in multi-user mode. 110 1.27 is options SCSIVERBOSE # Verbose SCSI errors 111 1.27 is 112 1.27 is options NTP # NTP phase/frequency locked loop 113 1.27 is 114 1.27 is #Misc. debugging options 115 1.1 is 116 1.19 lukem options DDB # Kernel debugger 117 1.19 lukem #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 118 1.27 is options DIAGNOSTIC # Extra kernel sanity checks 119 1.27 is #options DEBUG # Enable misc. kernel debugging code 120 1.19 lukem #options SYSCALL_DEBUG # debug all syscalls. 121 1.19 lukem #options SCSIDEBUG # Add SCSI debugging statements 122 1.19 lukem #options PANICBUTTON # Forced crash via keypress (???) 123 1.1 is 124 1.27 is #Amiga specific options 125 1.27 is 126 1.30 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 127 1.32 is # first bank of RAM. (default: unlimited) 128 1.27 is #options NKPTADD=4 # set this for 4 additional KPT pages 129 1.27 is #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 130 1.32 is # per 16 MB (1<<24 bytes) of RAM 131 1.32 is # define and decrease this, or define and 132 1.32 is # increase NKPTADD if you get "out of PT pages" 133 1.32 is # panics. 134 1.32 is 135 1.27 is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 136 1.27 is #before the 10 secondinterval ends, or that KBDRESET does work at all. 137 1.27 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 138 1.27 is 139 1.27 is #These options improve performance with the built-in serial port 140 1.27 is #on slower Amigas. Try the larger buffers first then lev6_defer. 141 1.27 is #options SERIBUF_SIZE=4096 142 1.27 is #options SEROBUF_SIZE=32 143 1.27 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 144 1.1 is 145 1.19 lukem options RETINACONSOLE # enable code to allow retina to be console 146 1.1 is 147 1.27 is #options KFONT_8X11 # 8x11 font 148 1.1 is 149 1.27 is #This is how you would tell the kernel the A2410 oscillator frequencies: 150 1.32 is #The used frequencies are the defaults, and do not need option setting 151 1.27 is #options ULOWELL_OSC1=36000000 152 1.27 is #options ULOWELL_OSC2=66667000 153 1.27 is 154 1.27 is #This is how you specify the blitting speed, higher values may speed up blits 155 1.27 is #a littel bit. If you raise this value too much some trash may appear. 156 1.27 is #the commented version is the default. 157 1.27 is #options RH_MEMCLK=61000000 158 1.30 is #this option enables the 64 bit sprite which does not work 159 1.27 is #for quite a few people. E.g. The cursor sprite will turn to a block 160 1.27 is #when moved to the top of the screen in X. 161 1.19 lukem #options RH_64BIT_SPRITE 162 1.27 is #enables fast scroll code appears to now work on 040 systems. 163 1.19 lukem #options RETINA_SPEED_HACK 164 1.27 is #enables the Hardwarecursor which does not work on some systems. 165 1.27 is #options RH_HARDWARECURSOR 166 1.27 is 167 1.27 is grfrh0 at zbus0 # retina III 168 1.1 is 169 1.1 is grf2 at grfrh0 170 1.27 is 171 1.30 is ite2 at grf2 # terminal emulators for grfs 172 1.1 is 173 1.27 is msc0 at zbus0 # A2232 MSC multiport serial. 174 1.27 is mfc0 at zbus0 # MultiFaceCard I/O board 175 1.27 is mfcs0 at mfc0 unit 0 # MFC serial 176 1.27 is mfcs1 at mfc0 unit 1 # MFC serial 177 1.1 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 178 1.1 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 179 1.1 is #mfcs2 at mfc1 unit 0 180 1.1 is #mfcs3 at mfc1 unit 1 181 1.1 is #mfcp1 at mfc1 unit 0 182 1.12 is 183 1.35 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 184 1.27 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 185 1.27 is com* at hyper? port ? # Hypercom3/4 serial ports 186 1.35 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 187 1.27 is 188 1.45 is #not enabled yet... needs more testing and clock frequency autodetection 189 1.45 is #iobl* at zbus? # zbus IOBlix 190 1.45 is #com* at iobl? port ? # IOBlix serial ports 191 1.45 is #lpt* at iobl? port ? # IOBlix parallel ports 192 1.45 is 193 1.27 is #DraCo Mainboard devices (sans keyboard) 194 1.27 is 195 1.14 is drbbc0 at mainbus0 # DraCo battery backed clock 196 1.15 is drsupio0 at mainbus0 # DraCo superio chip 197 1.15 is com* at drsupio? port ? # DraCo serial 198 1.17 is lpt0 at drsupio? port ? # DraCo parallel 199 1.1 is 200 1.27 is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 201 1.18 is 202 1.27 is #Ethernet cards: 203 1.27 is le* at zbus0 # A2065, Ameristar, Ariadne 204 1.27 is ne* at zbus0 # AriadneII 205 1.36 is ed* at zbus0 # Hydra, ASDG LanRover 206 1.36 is es* at zbus0 # CEI A4066 EthernetPLUS 207 1.36 is qn* at zbus0 # Quicknet 208 1.1 is 209 1.27 is bah* at zbus0 # C=/Ameristar A2060 / 560 210 1.27 is 211 1.27 is drsc0 at mainbus0 # DraCo scsi 212 1.1 is scsibus* at drsc0 213 1.1 is 214 1.27 is #each hard drive from low target to high 215 1.27 is #will configure to the next available sd unit number 216 1.1 is sd* at scsibus? target ? lun ? # scsi disks 217 1.1 is st* at scsibus? target ? lun ? # scsi tapes 218 1.30 is cd* at scsibus? target ? lun ? # scsi cds 219 1.47 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 220 1.47 sommerfe 221 1.4 veego ss* at scsibus? target ? lun ? # scsi scanner 222 1.7 veego uk* at scsibus? target ? lun ? # scsi unknown 223 1.1 is 224 1.27 is pseudo-device loop # loopback network interface 225 1.27 is pseudo-device sl 1 # SLIP network interfaces 226 1.27 is pseudo-device ppp 1 # PPP network interfaces 227 1.27 is pseudo-device tun 1 # network tunnel line discipline 228 1.27 is #pseudo-device gre 2 # generic L3 over IP tunnel 229 1.33 tron #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 230 1.27 is pseudo-device bpfilter 16 # Berkeley packet filter 231 1.27 is pseudo-device ipfilter # IP Filter package 232 1.42 is pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 233 1.42 is #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 234 1.47 sommerfe #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 235 1.27 is 236 1.38 is pseudo-device view 4 # views (needed for grfcc) 237 1.49 jdolecek pseudo-device pty # pseudo-terminals 238 1.27 is 239 1.27 is pseudo-device vnd 4 # vnode pseudo-disks 240 1.27 is pseudo-device ccd 4 # concatenated disk devices 241 1.27 is #pseudo-device raid 4 # RAIDframe disk driver 242 1.45 is #options RAID_AUTOCONFIG # auto-configuration of RAID components 243 1.27 is 244 1.27 is #rnd is EXPERIMENTAL at this point. 245 1.32 is #pseudo-device rnd # /dev/random and in-kernel generator 246 1.27 is #options RND_COM # use "com" randomness as well (BROKEN) 247 1.1 is 248 1.9 thorpej config netbsd root on ? type ? 249
Indexes created Tue Sep 30 11:09:46 GMT 2025