Home | History | Annotate | Line # | Download | only in conf
DRACO revision 1.54.2.1
      1  1.54.2.1   thorpej # $NetBSD: DRACO,v 1.54.2.1 2001/09/13 01:12:59 thorpej Exp $
      2      1.28        is #
      3      1.27        is # This file was automatically created. Changes will be
      4      1.27        is # lost when running make in this directory.
      5       1.1        is #
      6  1.54.2.1   thorpej # Created from: #NetBSD: GENERIC,v 1.161 2001/08/25 21:15:46 is Exp $
      7       1.1        is 
      8      1.21        is include "arch/amiga/conf/std.amiga"
      9      1.43    mhitch 
     10  1.54.2.1   thorpej #ident  		"GENERIC-$Revision: 1.54.2.1 $"
     11       1.1        is 
     12       1.1        is maxusers	8
     13      1.19     lukem options 	RTC_OFFSET=0
     14       1.1        is 
     15      1.27        is #mainboards to support (in addition to Amiga)
     16      1.27        is 
     17      1.19     lukem options 	DRACO
     18       1.4     veego 
     19      1.27        is #processors this kernel should support
     20      1.27        is 
     21      1.27        is options 	M68060		# support for 060
     22      1.27        is options 	M060SP		# MC68060 software support (Required for 060)
     23       1.1        is 
     24      1.47  sommerfe #Networking options
     25      1.47  sommerfe 
     26      1.19     lukem options 	INET		# IP networking support (Required)
     27      1.42        is options 	INET6		# IPV6
     28      1.42        is #options 	IPSEC		# IP security
     29      1.42        is #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     30      1.42        is #options 	IPSEC_DEBUG	# debug for IP security
     31      1.19     lukem #options 	GATEWAY		# Packet forwarding
     32      1.19     lukem #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     33      1.45        is 
     34      1.27        is #options 	MROUTING	# Multicast routing
     35      1.27        is options 	NS		# XNS
     36      1.27        is #options 	NSIP		# XNS tunneling over IP
     37      1.27        is options 	ISO,TPIP	# OSI
     38      1.47  sommerfe #options 	EON		# OSI tunneling over IP
     39      1.27        is options 	CCITT,LLC,HDLC	# X.25
     40      1.27        is options 	NETATALK	# AppleTalk networking protocols
     41      1.54       abs #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
     42      1.45        is 
     43      1.27        is options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     44      1.27        is options 	PPP_DEFLATE	# Deflate compression support for PPP
     45      1.27        is options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     46      1.27        is options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     47      1.27        is options 	IPFILTER_LOG	# ipmon(8) log support
     48       1.1        is 
     49       1.9   thorpej file-system 	FFS		# Berkeley fast file system
     50      1.34      tron file-system 	EXT2FS		# second extended file system (linux)
     51      1.27        is #file-system 	LFS		# log-structured filesystem (experimental)
     52      1.45        is 
     53       1.9   thorpej file-system 	MFS		# Memory based filesystem
     54      1.45        is 
     55       1.9   thorpej file-system 	NFS		# Network File System client side code
     56       1.9   thorpej file-system 	ADOSFS		# AmigaDOS file system
     57      1.27        is file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
     58      1.27        is file-system 	MSDOSFS		# MS-DOS filesystem
     59      1.45        is 
     60      1.45        is file-system 	KERNFS		# kernel data-structure filesystem
     61      1.45        is 
     62      1.27        is file-system 	FDESC		# user file descriptor filesystem
     63      1.27        is file-system 	NULLFS		# loopback filesystem
     64      1.42        is file-system 	OVERLAY		# overlay filesystem
     65       1.9   thorpej #file-system 	PORTAL		# Portal filesystem
     66      1.27        is file-system 	PROCFS		# /proc filesystem
     67      1.27        is file-system 	UMAPFS		# NULLFS + uid and gid remapping
     68      1.27        is file-system 	UNION		# union filesystem
     69      1.27        is 
     70      1.27        is #Filesystem options
     71      1.45        is 
     72      1.45        is #options 	FFS_EI		# FFS Endian Independant support
     73      1.45        is 
     74      1.27        is options 	QUOTA		# User and group quotas in FFS
     75      1.47  sommerfe options 	SOFTDEP         # FFS soft updates support.
     76      1.34      tron options 	NFSSERVER	# Network File System server side code
     77      1.45        is 
     78      1.34      tron #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
     79      1.34      tron 				# immutable) behave as system flags.
     80      1.27        is 
     81      1.53       wiz #Compatibility options for various existing systems
     82      1.27        is 
     83      1.54       abs #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     84      1.27        is options 	COMPAT_43	# compatibility with 4.3BSD interfaces
     85      1.27        is options 	COMPAT_09	# compatibility with NetBSD 0.9
     86      1.27        is options 	COMPAT_10	# compatibility with NetBSD 1.0
     87      1.27        is options 	COMPAT_12	# compatibility with NetBSD 1.2
     88      1.27        is options 	COMPAT_13	# compatibility with NetBSD 1.3
     89      1.40  augustss options 	COMPAT_14	# compatibility with NetBSD 1.4
     90      1.30        is options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
     91      1.34      tron options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
     92      1.27        is options 	COMPAT_NOMID	# allow nonvalid machine id executables
     93      1.30        is #options 	COMPAT_LINUX	# Support to run Linux/m68k executables
     94      1.37        is options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
     95       1.1        is 
     96      1.27        is #Support for System V IPC facilities.
     97       1.1        is 
     98      1.19     lukem options 	SYSVSHM		# System V-like shared memory
     99      1.19     lukem options 	SYSVMSG		# System V-like messages
    100      1.19     lukem options 	SYSVSEM		# System V-like semaphores
    101      1.54       abs #options	SEMMNI=10	# number of semaphore identifiers
    102      1.54       abs #options	SEMMNS=60	# number of semaphores in system
    103      1.54       abs #options	SEMUME=10	# max number of undo entries per process
    104      1.54       abs #options	SEMMNU=30	# number of undo structures in system
    105       1.1        is 
    106      1.27        is #Support for various kernel options
    107      1.27        is 
    108      1.27        is options 	KTRACE		# system call tracing support
    109      1.19     lukem options 	LKM		# Loadable kernel modules
    110      1.27        is options 	UCONSOLE	# anyone can redirect a virtual console
    111      1.45        is 
    112      1.27        is #options 	INSECURE	# allow, among other insecure stuff, LKM 
    113      1.32        is 				# loading in multi-user mode.
    114      1.27        is options 	SCSIVERBOSE	# Verbose SCSI errors
    115      1.27        is 
    116      1.27        is options 	NTP		# NTP phase/frequency locked loop
    117      1.27        is 
    118      1.27        is #Misc. debugging options
    119       1.1        is 
    120      1.19     lukem options 	DDB		# Kernel debugger
    121      1.19     lukem #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    122      1.27        is options 	DIAGNOSTIC	# Extra kernel sanity checks
    123      1.27        is #options 	DEBUG		# Enable misc. kernel debugging code
    124      1.19     lukem #options 	SYSCALL_DEBUG	# debug all syscalls.
    125      1.19     lukem #options 	SCSIDEBUG	# Add SCSI debugging statements
    126      1.19     lukem #options 	PANICBUTTON	# Forced crash via keypress (???)
    127       1.1        is 
    128      1.27        is #Amiga specific options
    129      1.27        is 
    130      1.30        is #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    131      1.32        is 				# first bank of RAM. (default: unlimited)
    132      1.27        is #options	NKPTADD=4	# set this for 4 additional KPT pages
    133      1.27        is #options	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    134      1.32        is 				# per 16 MB (1<<24 bytes) of RAM
    135      1.32        is                                 # define and decrease this, or define and
    136      1.32        is                                 # increase NKPTADD if you get "out of PT pages"
    137      1.32        is                                 # panics.
    138      1.32        is 
    139      1.27        is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    140      1.27        is #before the 10 secondinterval ends, or that KBDRESET does work at all.
    141      1.27        is #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    142      1.27        is 
    143      1.27        is #These options improve performance with the built-in serial port
    144      1.27        is #on slower Amigas.  Try the larger buffers first then lev6_defer.
    145      1.27        is #options 	SERIBUF_SIZE=4096
    146      1.27        is #options 	SEROBUF_SIZE=32
    147      1.27        is #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    148       1.1        is 
    149      1.19     lukem options 	RETINACONSOLE	# enable code to allow retina to be console
    150       1.1        is 
    151      1.27        is #options 	KFONT_8X11	# 8x11 font
    152       1.1        is 
    153      1.27        is #This is how you would tell the kernel the A2410 oscillator frequencies:
    154      1.32        is #The used frequencies are the defaults, and do not need option setting
    155      1.27        is #options 	ULOWELL_OSC1=36000000
    156      1.27        is #options 	ULOWELL_OSC2=66667000
    157      1.27        is 
    158      1.27        is #This is how you specify the blitting speed, higher values may speed up blits
    159      1.27        is #a littel bit.  If you raise this value too much some trash may appear.
    160      1.27        is #the commented version is the default.
    161      1.27        is #options 	RH_MEMCLK=61000000
    162      1.30        is #this option enables the 64 bit sprite which does not work
    163      1.27        is #for quite a few people.  E.g. The cursor sprite will turn to a block
    164      1.27        is #when moved to the top of the screen in X.
    165      1.19     lukem #options 	RH_64BIT_SPRITE
    166      1.27        is #enables fast scroll code appears to now work on 040 systems.
    167      1.19     lukem #options 	RETINA_SPEED_HACK
    168      1.27        is #enables the Hardwarecursor which does not work on some systems.
    169      1.27        is #options 	RH_HARDWARECURSOR
    170      1.27        is 
    171      1.27        is grfrh0		at zbus0		# retina III
    172       1.1        is 
    173       1.1        is grf2		at grfrh0
    174      1.27        is 
    175      1.30        is ite2		at grf2			# terminal emulators for grfs
    176       1.1        is 
    177      1.27        is msc0		at zbus0		# A2232 MSC multiport serial.
    178      1.27        is mfc0		at zbus0		# MultiFaceCard I/O board
    179      1.27        is mfcs0		at mfc0 unit 0		# MFC serial
    180      1.27        is mfcs1		at mfc0 unit 1		# MFC serial
    181       1.1        is #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    182       1.1        is #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    183       1.1        is #mfcs2		at mfc1 unit 0
    184       1.1        is #mfcs3		at mfc1 unit 1
    185       1.1        is #mfcp1		at mfc1 unit 0
    186      1.12        is 
    187      1.35        is hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    188      1.27        is #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    189      1.27        is com*		at hyper? port ?	# Hypercom3/4 serial ports
    190      1.35        is lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    191      1.27        is 
    192      1.52        is #options IOBZCLOCK=22118400 		# default, uncomment the next line
    193      1.52        is #options IOBZCLOCK=24000000		# if needed.
    194      1.52        is 
    195      1.52        is iobl*		at zbus?		# zbus IOBlix
    196      1.52        is com*		at iobl? port ?		# IOBlix serial ports
    197      1.52        is lpt*		at iobl? port ?		# IOBlix parallel ports
    198      1.52        is 
    199      1.52        is #Keyboard device. Optionally can attach a wskbd.
    200      1.52        is #wskbd works together with a wsdisplay so enable them both if you will.
    201      1.52        is #Don't enable wskbd if you use ite.
    202      1.52        is 
    203      1.52        is #XXX in std.amiga: kbd0 at mainbus0
    204      1.52        is #wskbd0		at kbd0 console ?
    205      1.45        is 
    206      1.27        is #DraCo Mainboard devices (sans keyboard)
    207      1.27        is 
    208      1.14        is drbbc0		at mainbus0		# DraCo battery backed clock
    209      1.15        is drsupio0	at mainbus0		# DraCo superio chip
    210      1.15        is com*		at drsupio? port ?	# DraCo serial
    211      1.17        is lpt0		at drsupio? port ?	# DraCo parallel
    212       1.1        is 
    213      1.27        is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    214  1.54.2.1   thorpej 
    215  1.54.2.1   thorpej repulse*	at zbus0		# ALiENDESiGN Repulse
    216  1.54.2.1   thorpej audio*		at repulse?
    217      1.18        is 
    218      1.27        is #Ethernet cards:
    219      1.27        is le*		at zbus0		# A2065, Ameristar, Ariadne
    220      1.51        is ne*		at zbus0		# AriadneII, X-surf
    221      1.36        is ed*		at zbus0		# Hydra, ASDG LanRover
    222      1.36        is es*		at zbus0		# CEI A4066 EthernetPLUS
    223      1.36        is qn*		at zbus0		# Quicknet
    224       1.1        is 
    225      1.27        is bah*		at zbus0		# C=/Ameristar A2060 / 560
    226      1.27        is 
    227      1.27        is drsc0		at mainbus0		# DraCo scsi
    228       1.1        is scsibus*	at drsc0
    229       1.1        is 
    230      1.27        is #each hard drive from low target to high
    231      1.27        is #will configure to the next available sd unit number
    232       1.1        is sd*	at scsibus? target ? lun ?	# scsi disks
    233       1.1        is st*	at scsibus? target ? lun ?	# scsi tapes
    234      1.30        is cd*	at scsibus? target ? lun ?	# scsi cds
    235      1.47  sommerfe ch*	at scsibus? target ? lun ?	# scsi autochangers
    236      1.47  sommerfe 
    237       1.4     veego ss*	at scsibus? target ? lun ?	# scsi scanner
    238       1.7     veego uk*	at scsibus? target ? lun ?	# scsi unknown
    239       1.1        is 
    240      1.27        is pseudo-device	loop			# loopback network interface
    241      1.27        is pseudo-device	sl		1	# SLIP network interfaces
    242      1.27        is pseudo-device	ppp		1	# PPP network interfaces
    243      1.27        is pseudo-device	tun		1	# network tunnel line discipline
    244      1.27        is #pseudo-device	gre		2	# generic L3 over IP tunnel
    245      1.33      tron #pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
    246      1.27        is pseudo-device	bpfilter	16	# Berkeley packet filter
    247      1.27        is pseudo-device	ipfilter		# IP Filter package
    248      1.42        is pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    249      1.42        is #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    250      1.47  sommerfe #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    251      1.51        is pseudo-device	vlan			# IEEE 802.1q encapsulation
    252      1.27        is 
    253      1.38        is pseudo-device	view		4	# views (needed for grfcc)
    254      1.49  jdolecek pseudo-device	pty			# pseudo-terminals
    255      1.27        is 
    256      1.27        is pseudo-device	vnd		4	# vnode pseudo-disks
    257      1.27        is pseudo-device	ccd		4	# concatenated disk devices
    258      1.27        is #pseudo-device	raid		4	# RAIDframe disk driver
    259      1.45        is #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    260      1.27        is 
    261      1.50        is pseudo-device  rnd                     # /dev/random and in-kernel generator
    262      1.27        is #options        RND_COM                 # use "com" randomness as well (BROKEN)
    263       1.1        is 
    264       1.9   thorpej config	netbsd root on ? type ?
    265