DRACO revision 1.60
1 1.57 jandberg # $NetBSD: DRACO,v 1.60 2002/01/27 13:36:59 is Exp $ 2 1.28 is # 3 1.27 is # This file was automatically created. Changes will be 4 1.27 is # lost when running make in this directory. 5 1.1 is # 6 1.60 is # Created from: #NetBSD: GENERIC,v 1.173 2002/01/27 13:27:51 is Exp $ 7 1.1 is 8 1.57 jandberg #GENERIC machine description file 9 1.57 jandberg 10 1.57 jandberg #This machine description file is used to generate the default NetBSD 11 1.57 jandberg #kernel. The generic kernel does not include all options, subsystems 12 1.57 jandberg #and device drivers, but should be useful for most applications. 13 1.57 jandberg 14 1.57 jandberg #The machine description file can be customised for your specific 15 1.57 jandberg #machine to reduce the kernel size and improve its performance. 16 1.57 jandberg 17 1.57 jandberg #For further information on compiling NetBSD kernels, see the config(8) 18 1.57 jandberg #man page. 19 1.57 jandberg 20 1.57 jandberg #For further information on hardware support for this architecture, see 21 1.57 jandberg #the intro(4) man page. For further information about kernel options 22 1.57 jandberg #for this architecture, see the options(4) man page. For an explanation 23 1.57 jandberg #of each device driver in this file see the section 4 man page for the 24 1.57 jandberg #device. 25 1.21 is include "arch/amiga/conf/std.amiga" 26 1.43 mhitch 27 1.60 is #ident "GENERIC-$Revision: 1.60 $" 28 1.1 is 29 1.1 is maxusers 8 30 1.19 lukem options RTC_OFFSET=0 31 1.1 is 32 1.27 is #mainboards to support (in addition to Amiga) 33 1.27 is 34 1.19 lukem options DRACO 35 1.4 veego 36 1.27 is #processors this kernel should support 37 1.27 is 38 1.27 is options M68060 # support for 060 39 1.27 is options M060SP # MC68060 software support (Required for 060) 40 1.1 is 41 1.47 sommerfe #Networking options 42 1.47 sommerfe 43 1.19 lukem options INET # IP networking support (Required) 44 1.42 is options INET6 # IPV6 45 1.42 is #options IPSEC # IP security 46 1.42 is #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 47 1.42 is #options IPSEC_DEBUG # debug for IP security 48 1.19 lukem #options GATEWAY # Packet forwarding 49 1.19 lukem #options DIRECTED_BROADCAST # Broadcast across subnets 50 1.45 is 51 1.27 is #options MROUTING # Multicast routing 52 1.27 is options NS # XNS 53 1.27 is #options NSIP # XNS tunneling over IP 54 1.27 is options ISO,TPIP # OSI 55 1.47 sommerfe #options EON # OSI tunneling over IP 56 1.27 is options CCITT,LLC,HDLC # X.25 57 1.27 is options NETATALK # AppleTalk networking protocols 58 1.54 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 59 1.45 is 60 1.27 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 61 1.27 is options PPP_DEFLATE # Deflate compression support for PPP 62 1.27 is options PPP_FILTER # Active filter support for PPP (requires bpf) 63 1.27 is options PFIL_HOOKS # pfil(9) packet filter hooks 64 1.27 is options IPFILTER_LOG # ipmon(8) log support 65 1.1 is 66 1.9 thorpej file-system FFS # Berkeley fast file system 67 1.34 tron file-system EXT2FS # second extended file system (linux) 68 1.27 is #file-system LFS # log-structured filesystem (experimental) 69 1.45 is 70 1.9 thorpej file-system MFS # Memory based filesystem 71 1.45 is 72 1.9 thorpej file-system NFS # Network File System client side code 73 1.9 thorpej file-system ADOSFS # AmigaDOS file system 74 1.27 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 75 1.27 is file-system MSDOSFS # MS-DOS filesystem 76 1.45 is 77 1.45 is file-system KERNFS # kernel data-structure filesystem 78 1.45 is 79 1.27 is file-system FDESC # user file descriptor filesystem 80 1.27 is file-system NULLFS # loopback filesystem 81 1.42 is file-system OVERLAY # overlay filesystem 82 1.9 thorpej #file-system PORTAL # Portal filesystem 83 1.27 is file-system PROCFS # /proc filesystem 84 1.27 is file-system UMAPFS # NULLFS + uid and gid remapping 85 1.27 is file-system UNION # union filesystem 86 1.27 is 87 1.27 is #Filesystem options 88 1.45 is 89 1.45 is #options FFS_EI # FFS Endian Independant support 90 1.45 is 91 1.27 is options QUOTA # User and group quotas in FFS 92 1.56 lukem options SOFTDEP # FFS soft updates support. 93 1.34 tron options NFSSERVER # Network File System server side code 94 1.45 is 95 1.34 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 96 1.34 tron # immutable) behave as system flags. 97 1.27 is 98 1.53 wiz #Compatibility options for various existing systems 99 1.27 is 100 1.54 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 101 1.27 is options COMPAT_43 # compatibility with 4.3BSD interfaces 102 1.27 is options COMPAT_09 # compatibility with NetBSD 0.9 103 1.27 is options COMPAT_10 # compatibility with NetBSD 1.0 104 1.27 is options COMPAT_12 # compatibility with NetBSD 1.2 105 1.27 is options COMPAT_13 # compatibility with NetBSD 1.3 106 1.40 augustss options COMPAT_14 # compatibility with NetBSD 1.4 107 1.30 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 108 1.34 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 109 1.27 is options COMPAT_NOMID # allow nonvalid machine id executables 110 1.30 is #options COMPAT_LINUX # Support to run Linux/m68k executables 111 1.37 is options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 112 1.1 is 113 1.27 is #Support for System V IPC facilities. 114 1.1 is 115 1.19 lukem options SYSVSHM # System V-like shared memory 116 1.19 lukem options SYSVMSG # System V-like messages 117 1.19 lukem options SYSVSEM # System V-like semaphores 118 1.56 lukem #options SEMMNI=10 # number of semaphore identifiers 119 1.56 lukem #options SEMMNS=60 # number of semaphores in system 120 1.56 lukem #options SEMUME=10 # max number of undo entries per process 121 1.56 lukem #options SEMMNU=30 # number of undo structures in system 122 1.1 is 123 1.27 is #Support for various kernel options 124 1.27 is 125 1.27 is options KTRACE # system call tracing support 126 1.19 lukem options LKM # Loadable kernel modules 127 1.27 is options UCONSOLE # anyone can redirect a virtual console 128 1.45 is 129 1.58 jdolecek #options INSECURE # disable kernel security levels 130 1.58 jdolecek options SCSIVERBOSE # human readable SCSI error messages 131 1.27 is 132 1.27 is options NTP # NTP phase/frequency locked loop 133 1.60 is #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 134 1.27 is 135 1.27 is #Misc. debugging options 136 1.1 is 137 1.19 lukem options DDB # Kernel debugger 138 1.19 lukem #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 139 1.27 is options DIAGNOSTIC # Extra kernel sanity checks 140 1.27 is #options DEBUG # Enable misc. kernel debugging code 141 1.19 lukem #options SYSCALL_DEBUG # debug all syscalls. 142 1.19 lukem #options SCSIDEBUG # Add SCSI debugging statements 143 1.19 lukem #options PANICBUTTON # Forced crash via keypress (???) 144 1.1 is 145 1.27 is #Amiga specific options 146 1.27 is 147 1.30 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 148 1.32 is # first bank of RAM. (default: unlimited) 149 1.56 lukem #options NKPTADD=4 # set this for 4 additional KPT pages 150 1.56 lukem #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 151 1.32 is # per 16 MB (1<<24 bytes) of RAM 152 1.58 jdolecek # uncomment and decrease this, or uncomment and 153 1.56 lukem # increase NKPTADD if you get "out of PT pages" 154 1.56 lukem # panics. 155 1.32 is 156 1.27 is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 157 1.27 is #before the 10 secondinterval ends, or that KBDRESET does work at all. 158 1.27 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 159 1.27 is 160 1.27 is #These options improve performance with the built-in serial port 161 1.27 is #on slower Amigas. Try the larger buffers first then lev6_defer. 162 1.27 is #options SERIBUF_SIZE=4096 163 1.27 is #options SEROBUF_SIZE=32 164 1.27 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 165 1.1 is 166 1.19 lukem options RETINACONSOLE # enable code to allow retina to be console 167 1.1 is 168 1.27 is #options KFONT_8X11 # 8x11 font 169 1.1 is 170 1.27 is #This is how you would tell the kernel the A2410 oscillator frequencies: 171 1.32 is #The used frequencies are the defaults, and do not need option setting 172 1.27 is #options ULOWELL_OSC1=36000000 173 1.27 is #options ULOWELL_OSC2=66667000 174 1.27 is 175 1.27 is #This is how you specify the blitting speed, higher values may speed up blits 176 1.27 is #a littel bit. If you raise this value too much some trash may appear. 177 1.27 is #the commented version is the default. 178 1.27 is #options RH_MEMCLK=61000000 179 1.30 is #this option enables the 64 bit sprite which does not work 180 1.27 is #for quite a few people. E.g. The cursor sprite will turn to a block 181 1.27 is #when moved to the top of the screen in X. 182 1.19 lukem #options RH_64BIT_SPRITE 183 1.27 is #enables fast scroll code appears to now work on 040 systems. 184 1.19 lukem #options RETINA_SPEED_HACK 185 1.27 is #enables the Hardwarecursor which does not work on some systems. 186 1.27 is #options RH_HARDWARECURSOR 187 1.27 is 188 1.27 is grfrh0 at zbus0 # retina III 189 1.1 is 190 1.1 is grf2 at grfrh0 191 1.27 is 192 1.30 is ite2 at grf2 # terminal emulators for grfs 193 1.1 is 194 1.27 is msc0 at zbus0 # A2232 MSC multiport serial. 195 1.27 is mfc0 at zbus0 # MultiFaceCard I/O board 196 1.27 is mfcs0 at mfc0 unit 0 # MFC serial 197 1.27 is mfcs1 at mfc0 unit 1 # MFC serial 198 1.1 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 199 1.1 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 200 1.1 is #mfcs2 at mfc1 unit 0 201 1.1 is #mfcs3 at mfc1 unit 1 202 1.1 is #mfcp1 at mfc1 unit 0 203 1.12 is 204 1.35 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 205 1.27 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 206 1.27 is com* at hyper? port ? # Hypercom3/4 serial ports 207 1.35 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 208 1.27 is 209 1.56 lukem #options IOBZCLOCK=22118400 # default, uncomment the next line 210 1.56 lukem #options IOBZCLOCK=24000000 # if needed. 211 1.52 is 212 1.52 is iobl* at zbus? # zbus IOBlix 213 1.52 is com* at iobl? port ? # IOBlix serial ports 214 1.52 is lpt* at iobl? port ? # IOBlix parallel ports 215 1.52 is 216 1.52 is #Keyboard device. Optionally can attach a wskbd. 217 1.52 is #wskbd works together with a wsdisplay so enable them both if you will. 218 1.52 is #Don't enable wskbd if you use ite. 219 1.59 is 220 1.52 is #XXX in std.amiga: kbd0 at mainbus0 221 1.52 is #wskbd0 at kbd0 console ? 222 1.45 is 223 1.27 is #DraCo Mainboard devices (sans keyboard) 224 1.27 is 225 1.14 is drbbc0 at mainbus0 # DraCo battery backed clock 226 1.15 is drsupio0 at mainbus0 # DraCo superio chip 227 1.15 is com* at drsupio? port ? # DraCo serial 228 1.17 is lpt0 at drsupio? port ? # DraCo parallel 229 1.1 is 230 1.27 is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 231 1.55 is 232 1.55 is repulse* at zbus0 # ALiENDESiGN Repulse 233 1.55 is audio* at repulse? 234 1.59 is 235 1.59 is toccata* at zbus0 # MacroSystem GmbH Toccata 236 1.59 is audio* at toccata? 237 1.18 is 238 1.27 is #Ethernet cards: 239 1.27 is le* at zbus0 # A2065, Ameristar, Ariadne 240 1.51 is ne* at zbus0 # AriadneII, X-surf 241 1.36 is ed* at zbus0 # Hydra, ASDG LanRover 242 1.36 is es* at zbus0 # CEI A4066 EthernetPLUS 243 1.36 is qn* at zbus0 # Quicknet 244 1.1 is 245 1.27 is bah* at zbus0 # C=/Ameristar A2060 / 560 246 1.27 is 247 1.27 is drsc0 at mainbus0 # DraCo scsi 248 1.1 is scsibus* at drsc0 249 1.1 is 250 1.27 is #each hard drive from low target to high 251 1.27 is #will configure to the next available sd unit number 252 1.1 is sd* at scsibus? target ? lun ? # scsi disks 253 1.1 is st* at scsibus? target ? lun ? # scsi tapes 254 1.30 is cd* at scsibus? target ? lun ? # scsi cds 255 1.47 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 256 1.47 sommerfe 257 1.4 veego ss* at scsibus? target ? lun ? # scsi scanner 258 1.7 veego uk* at scsibus? target ? lun ? # scsi unknown 259 1.1 is 260 1.27 is pseudo-device loop # loopback network interface 261 1.27 is pseudo-device sl 1 # SLIP network interfaces 262 1.27 is pseudo-device ppp 1 # PPP network interfaces 263 1.57 jandberg pseudo-device pppoe # PPP over Ethernet (RFC 2516) 264 1.27 is pseudo-device tun 1 # network tunnel line discipline 265 1.27 is #pseudo-device gre 2 # generic L3 over IP tunnel 266 1.33 tron #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 267 1.27 is pseudo-device bpfilter 16 # Berkeley packet filter 268 1.27 is pseudo-device ipfilter # IP Filter package 269 1.42 is pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 270 1.42 is #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 271 1.47 sommerfe #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 272 1.51 is pseudo-device vlan # IEEE 802.1q encapsulation 273 1.57 jandberg pseudo-device bridge # simple inter-network bridging 274 1.27 is 275 1.38 is pseudo-device view 4 # views (needed for grfcc) 276 1.49 jdolecek pseudo-device pty # pseudo-terminals 277 1.27 is 278 1.27 is pseudo-device vnd 4 # vnode pseudo-disks 279 1.27 is pseudo-device ccd 4 # concatenated disk devices 280 1.58 jdolecek pseudo-device raid 8 # RAIDframe disk driver 281 1.58 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 282 1.58 jdolecek #Options to enable various other RAIDframe RAID types. 283 1.58 jdolecek #options RF_INCLUDE_EVENODD=1 284 1.58 jdolecek #options RF_INCLUDE_RAID5_RS=1 285 1.58 jdolecek #options RF_INCLUDE_PARITYLOGGING=1 286 1.58 jdolecek #options RF_INCLUDE_CHAINDECLUSTER=1 287 1.58 jdolecek #options RF_INCLUDE_INTERDECLUSTER=1 288 1.58 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING=1 289 1.58 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 290 1.27 is 291 1.56 lukem pseudo-device rnd # /dev/random and in-kernel generator 292 1.56 lukem #options RND_COM # use "com" randomness as well (BROKEN) 293 1.1 is 294 1.9 thorpej config netbsd root on ? type ? 295
Indexes created Wed Oct 01 18:09:54 GMT 2025