DRACO revision 1.77.2.10
1 1.77.2.10 skrll # $NetBSD: DRACO,v 1.77.2.10 2005/11/10 13:51:36 skrll Exp $ 2 1.28 is # 3 1.69 lukem # This file was automatically created. 4 1.69 lukem # Changes will be lost when make is run in this directory. 5 1.1 is # 6 1.77.2.10 skrll # Created from: # NetBSD: GENERIC.in,v 1.45 2005/11/03 16:48:29 chs Exp $ 7 1.69 lukem # 8 1.69 lukem # GENERIC machine description file 9 1.69 lukem # 10 1.69 lukem # This machine description file is used to generate the default NetBSD 11 1.69 lukem # kernel. The generic kernel does not include all options, subsystems 12 1.69 lukem # and device drivers, but should be useful for most applications. 13 1.69 lukem # 14 1.69 lukem # The machine description file can be customised for your specific 15 1.69 lukem # machine to reduce the kernel size and improve its performance. 16 1.69 lukem # 17 1.69 lukem # For further information on compiling NetBSD kernels, see the config(8) 18 1.69 lukem # man page. 19 1.69 lukem # 20 1.69 lukem # For further information on hardware support for this architecture, see 21 1.69 lukem # the intro(4) man page. For further information about kernel options 22 1.69 lukem # for this architecture, see the options(4) man page. For an explanation 23 1.69 lukem # of each device driver in this file see the section 4 man page for the 24 1.69 lukem # device. 25 1.57 jandberg 26 1.57 jandberg 27 1.21 is include "arch/amiga/conf/std.amiga" 28 1.43 mhitch 29 1.66 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 1.66 atatat 31 1.77.2.10 skrll #ident "GENERIC-$Revision: 1.77.2.10 $" 32 1.69 lukem 33 1.1 is 34 1.1 is maxusers 8 35 1.19 lukem options RTC_OFFSET=0 36 1.1 is 37 1.69 lukem # 38 1.69 lukem # mainboards to support (in addition to Amiga) 39 1.69 lukem # 40 1.19 lukem options DRACO 41 1.69 lukem # 42 1.69 lukem # processors this kernel should support 43 1.69 lukem # 44 1.27 is options M68060 # support for 060 45 1.27 is options M060SP # MC68060 software support (Required for 060) 46 1.1 is 47 1.69 lukem # 48 1.69 lukem # Networking options 49 1.69 lukem # 50 1.19 lukem options INET # IP networking support (Required) 51 1.42 is options INET6 # IPV6 52 1.42 is #options IPSEC # IP security 53 1.42 is #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 54 1.77.2.10 skrll #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 55 1.42 is #options IPSEC_DEBUG # debug for IP security 56 1.19 lukem #options GATEWAY # Packet forwarding 57 1.19 lukem #options DIRECTED_BROADCAST # Broadcast across subnets 58 1.45 is 59 1.27 is #options MROUTING # Multicast routing 60 1.77.2.2 skrll #options PIM # Protocol Independent Multicast 61 1.27 is options NS # XNS 62 1.27 is #options NSIP # XNS tunneling over IP 63 1.27 is options ISO,TPIP # OSI 64 1.47 sommerfe #options EON # OSI tunneling over IP 65 1.27 is options CCITT,LLC,HDLC # X.25 66 1.27 is options NETATALK # AppleTalk networking protocols 67 1.54 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 68 1.45 is 69 1.27 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 70 1.27 is options PPP_DEFLATE # Deflate compression support for PPP 71 1.27 is options PPP_FILTER # Active filter support for PPP (requires bpf) 72 1.27 is options PFIL_HOOKS # pfil(9) packet filter hooks 73 1.27 is options IPFILTER_LOG # ipmon(8) log support 74 1.72 provos #options IPFILTER_DEFAULT_BLOCK # block all packets by default 75 1.1 is 76 1.77.2.1 skrll #options ALTQ # Manipulate network interfaces' output queues 77 1.77.2.1 skrll #options ALTQ_BLUE # Stochastic Fair Blue 78 1.77.2.1 skrll #options ALTQ_CBQ # Class-Based Queueing 79 1.77.2.1 skrll #options ALTQ_CDNR # Diffserv Traffic Conditioner 80 1.77.2.1 skrll #options ALTQ_FIFOQ # First-In First-Out Queue 81 1.77.2.1 skrll #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 82 1.77.2.1 skrll #options ALTQ_HFSC # Hierarchical Fair Service Curve 83 1.77.2.1 skrll #options ALTQ_LOCALQ # Local queueing discipline 84 1.77.2.1 skrll #options ALTQ_PRIQ # Priority Queueing 85 1.77.2.1 skrll #options ALTQ_RED # Random Early Detection 86 1.77.2.1 skrll #options ALTQ_RIO # RED with IN/OUT 87 1.77.2.1 skrll #options ALTQ_WFQ # Weighted Fair Queueing 88 1.77.2.1 skrll 89 1.69 lukem # Filesystems 90 1.9 thorpej file-system FFS # Berkeley fast file system 91 1.34 tron file-system EXT2FS # second extended file system (linux) 92 1.27 is #file-system LFS # log-structured filesystem (experimental) 93 1.45 is 94 1.9 thorpej file-system MFS # Memory based filesystem 95 1.45 is 96 1.9 thorpej file-system NFS # Network File System client side code 97 1.9 thorpej file-system ADOSFS # AmigaDOS file system 98 1.27 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 99 1.27 is file-system MSDOSFS # MS-DOS filesystem 100 1.45 is 101 1.45 is file-system KERNFS # kernel data-structure filesystem 102 1.45 is 103 1.27 is file-system FDESC # user file descriptor filesystem 104 1.27 is file-system NULLFS # loopback filesystem 105 1.42 is file-system OVERLAY # overlay filesystem 106 1.9 thorpej #file-system PORTAL # Portal filesystem 107 1.27 is file-system PROCFS # /proc filesystem 108 1.27 is file-system UMAPFS # NULLFS + uid and gid remapping 109 1.27 is file-system UNION # union filesystem 110 1.77.2.9 skrll file-system SMBFS # experimental - CIFS; also needs nsmb (below) 111 1.77.2.10 skrll file-system PTYFS # /dev/pts/N support 112 1.77.2.10 skrll #file-system TMPFS # experimental - Efficient memory file-system 113 1.27 is 114 1.69 lukem # Filesystem options 115 1.45 is 116 1.45 is #options FFS_EI # FFS Endian Independant support 117 1.45 is 118 1.27 is options QUOTA # User and group quotas in FFS 119 1.56 lukem options SOFTDEP # FFS soft updates support. 120 1.77.2.7 skrll #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 121 1.34 tron options NFSSERVER # Network File System server side code 122 1.77.2.9 skrll #options FFS_NO_SNAPSHOT # ffs snapshots 123 1.45 is 124 1.34 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 125 1.34 tron # immutable) behave as system flags. 126 1.27 is 127 1.69 lukem # 128 1.69 lukem # Compatibility options for various existing systems 129 1.69 lukem # 130 1.27 is 131 1.54 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 132 1.27 is options COMPAT_43 # compatibility with 4.3BSD interfaces 133 1.27 is options COMPAT_09 # compatibility with NetBSD 0.9 134 1.27 is options COMPAT_10 # compatibility with NetBSD 1.0 135 1.27 is options COMPAT_12 # compatibility with NetBSD 1.2 136 1.27 is options COMPAT_13 # compatibility with NetBSD 1.3 137 1.40 augustss options COMPAT_14 # compatibility with NetBSD 1.4 138 1.77.2.1 skrll options COMPAT_15 # compatibility with NetBSD 1.5 139 1.77.2.1 skrll options COMPAT_16 # compatibility with NetBSD 1.6 140 1.77.2.9 skrll options COMPAT_20 # compatibility with NetBSD 2.0 141 1.77.2.10 skrll options COMPAT_30 # NetBSD 3.0 compatibility. 142 1.30 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 143 1.34 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 144 1.27 is options COMPAT_NOMID # allow nonvalid machine id executables 145 1.30 is #options COMPAT_LINUX # Support to run Linux/m68k executables 146 1.61 is 147 1.61 is options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 148 1.62 is options COMPAT_AOUT_M68K # actually make some system calls work. 149 1.77.2.4 skrll options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 150 1.1 is 151 1.69 lukem # 152 1.69 lukem # Support for System V IPC facilities. 153 1.69 lukem # 154 1.19 lukem options SYSVSHM # System V-like shared memory 155 1.19 lukem options SYSVMSG # System V-like messages 156 1.19 lukem options SYSVSEM # System V-like semaphores 157 1.56 lukem #options SEMMNI=10 # number of semaphore identifiers 158 1.56 lukem #options SEMMNS=60 # number of semaphores in system 159 1.56 lukem #options SEMUME=10 # max number of undo entries per process 160 1.56 lukem #options SEMMNU=30 # number of undo structures in system 161 1.77.2.1 skrll options P1003_1B_SEMAPHORE # p1003.1b semaphore support 162 1.1 is 163 1.69 lukem # 164 1.69 lukem # Support for various kernel options 165 1.69 lukem # 166 1.27 is 167 1.27 is options KTRACE # system call tracing support 168 1.72 provos options SYSTRACE # system call vetting via systrace(1) 169 1.19 lukem options LKM # Loadable kernel modules 170 1.58 jdolecek #options INSECURE # disable kernel security levels 171 1.58 jdolecek options SCSIVERBOSE # human readable SCSI error messages 172 1.71 lukem options USERCONF # userconf(4) support 173 1.27 is options NTP # NTP phase/frequency locked loop 174 1.69 lukem #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 175 1.74 wiz 176 1.74 wiz # Enable experimental buffer queue strategy for better responsiveness under 177 1.74 wiz # high disk I/O load. Use it with caution - it's not proven to be stable yet. 178 1.77.2.10 skrll #options BUFQ_READPRIO 179 1.77.2.10 skrll #options BUFQ_PRIOCSCAN 180 1.1 is 181 1.69 lukem # 182 1.69 lukem # Misc. debugging options 183 1.69 lukem # 184 1.19 lukem options DDB # Kernel debugger 185 1.19 lukem #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 186 1.77.2.10 skrll #options DIAGNOSTIC # Extra kernel sanity checks 187 1.27 is #options DEBUG # Enable misc. kernel debugging code 188 1.19 lukem #options SYSCALL_DEBUG # debug all syscalls. 189 1.19 lukem #options SCSIDEBUG # Add SCSI debugging statements 190 1.67 thorpej #options PANICBUTTON # Forced crash via keypress (?) 191 1.1 is 192 1.69 lukem # 193 1.69 lukem # Amiga specific options 194 1.69 lukem # 195 1.30 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 196 1.32 is # first bank of RAM. (default: unlimited) 197 1.56 lukem #options NKPTADD=4 # set this for 4 additional KPT pages 198 1.56 lukem #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 199 1.32 is # per 16 MB (1<<24 bytes) of RAM 200 1.58 jdolecek # uncomment and decrease this, or uncomment and 201 1.56 lukem # increase NKPTADD if you get "out of PT pages" 202 1.56 lukem # panics. 203 1.32 is 204 1.69 lukem # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 205 1.69 lukem # before the 10 secondinterval ends, or that KBDRESET does work at all. 206 1.27 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 207 1.27 is 208 1.69 lukem # These options improve performance with the built-in serial port 209 1.69 lukem # on slower Amigas. Try the larger buffers first then lev6_defer. 210 1.27 is #options SERIBUF_SIZE=4096 211 1.27 is #options SEROBUF_SIZE=32 212 1.27 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 213 1.77 is 214 1.1 is 215 1.19 lukem options RETINACONSOLE # enable code to allow retina to be console 216 1.27 is #options KFONT_8X11 # 8x11 font 217 1.65 heinz 218 1.69 lukem # select a font for the console according to the character set and keymap 219 1.69 lukem # you want to use 220 1.65 heinz options KFONT_CONS_ISO8859_1 221 1.65 heinz #options KFONT_CONS_ISO8859_2 222 1.1 is 223 1.69 lukem # This is how you would tell the kernel the A2410 oscillator frequencies: 224 1.69 lukem # The used frequencies are the defaults, and do not need option setting 225 1.27 is #options ULOWELL_OSC1=36000000 226 1.27 is #options ULOWELL_OSC2=66667000 227 1.27 is 228 1.69 lukem # This is how you specify the blitting speed, higher values may speed up blits 229 1.69 lukem # a littel bit. If you raise this value too much some trash may appear. 230 1.69 lukem # the commented version is the default. 231 1.27 is #options RH_MEMCLK=61000000 232 1.69 lukem # this option enables the 64 bit sprite which does not work 233 1.69 lukem # for quite a few people. E.g. The cursor sprite will turn to a block 234 1.69 lukem # when moved to the top of the screen in X. 235 1.19 lukem #options RH_64BIT_SPRITE 236 1.69 lukem # enables fast scroll code appears to now work on 040 systems. 237 1.19 lukem #options RETINA_SPEED_HACK 238 1.69 lukem # enables the Hardwarecursor which does not work on some systems. 239 1.27 is #options RH_HARDWARECURSOR 240 1.27 is 241 1.69 lukem 242 1.27 is grfrh0 at zbus0 # retina III 243 1.1 is 244 1.1 is grf2 at grfrh0 245 1.30 is ite2 at grf2 # terminal emulators for grfs 246 1.1 is 247 1.27 is msc0 at zbus0 # A2232 MSC multiport serial. 248 1.27 is mfc0 at zbus0 # MultiFaceCard I/O board 249 1.27 is mfcs0 at mfc0 unit 0 # MFC serial 250 1.27 is mfcs1 at mfc0 unit 1 # MFC serial 251 1.1 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 252 1.1 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 253 1.1 is #mfcs2 at mfc1 unit 0 254 1.1 is #mfcs3 at mfc1 unit 1 255 1.1 is #mfcp1 at mfc1 unit 0 256 1.12 is 257 1.35 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 258 1.27 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 259 1.27 is com* at hyper? port ? # Hypercom3/4 serial ports 260 1.35 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 261 1.27 is 262 1.56 lukem #options IOBZCLOCK=22118400 # default, uncomment the next line 263 1.56 lukem #options IOBZCLOCK=24000000 # if needed. 264 1.52 is 265 1.52 is iobl* at zbus? # zbus IOBlix 266 1.52 is com* at iobl? port ? # IOBlix serial ports 267 1.52 is lpt* at iobl? port ? # IOBlix parallel ports 268 1.52 is 269 1.69 lukem 270 1.66 atatat # 271 1.69 lukem # Keyboard device. Optionally can attach a wskbd. 272 1.69 lukem # wskbd works together with a wsdisplay so enable them both if you will. 273 1.69 lukem # Don't enable wskbd if you use ite. 274 1.69 lukem # 275 1.69 lukem # XXX in std.amiga: kbd0 at mainbus0 276 1.69 lukem 277 1.52 is #wskbd0 at kbd0 console ? 278 1.45 is 279 1.69 lukem 280 1.69 lukem 281 1.77.2.1 skrll 282 1.77.2.1 skrll #wsmouse* at ms? 283 1.77.2.1 skrll 284 1.69 lukem # 285 1.69 lukem # DraCo Mainboard devices (sans keyboard) 286 1.69 lukem # 287 1.27 is 288 1.14 is drbbc0 at mainbus0 # DraCo battery backed clock 289 1.15 is drsupio0 at mainbus0 # DraCo superio chip 290 1.15 is com* at drsupio? port ? # DraCo serial 291 1.17 is lpt0 at drsupio? port ? # DraCo parallel 292 1.1 is 293 1.69 lukem # 294 1.69 lukem # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 295 1.69 lukem # 296 1.69 lukem 297 1.55 is 298 1.55 is repulse* at zbus0 # ALiENDESiGN Repulse 299 1.55 is audio* at repulse? 300 1.59 is 301 1.59 is toccata* at zbus0 # MacroSystem GmbH Toccata 302 1.59 is audio* at toccata? 303 1.18 is 304 1.69 lukem # Ethernet cards: 305 1.27 is le* at zbus0 # A2065, Ameristar, Ariadne 306 1.51 is ne* at zbus0 # AriadneII, X-surf 307 1.36 is ed* at zbus0 # Hydra, ASDG LanRover 308 1.36 is es* at zbus0 # CEI A4066 EthernetPLUS 309 1.36 is qn* at zbus0 # Quicknet 310 1.1 is 311 1.69 lukem # Arcnet 312 1.27 is bah* at zbus0 # C=/Ameristar A2060 / 560 313 1.27 is 314 1.69 lukem 315 1.27 is drsc0 at mainbus0 # DraCo scsi 316 1.1 is scsibus* at drsc0 317 1.1 is 318 1.69 lukem 319 1.69 lukem # each hard drive from low target to high 320 1.69 lukem # will configure to the next available sd unit number 321 1.1 is sd* at scsibus? target ? lun ? # scsi disks 322 1.1 is st* at scsibus? target ? lun ? # scsi tapes 323 1.30 is cd* at scsibus? target ? lun ? # scsi cds 324 1.47 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 325 1.4 veego ss* at scsibus? target ? lun ? # scsi scanner 326 1.7 veego uk* at scsibus? target ? lun ? # scsi unknown 327 1.1 is 328 1.27 is pseudo-device loop # loopback network interface 329 1.27 is pseudo-device sl 1 # SLIP network interfaces 330 1.27 is pseudo-device ppp 1 # PPP network interfaces 331 1.57 jandberg pseudo-device pppoe # PPP over Ethernet (RFC 2516) 332 1.27 is pseudo-device tun 1 # network tunnel line discipline 333 1.77.2.6 skrll pseudo-device tap # virtual Ethernet 334 1.27 is #pseudo-device gre 2 # generic L3 over IP tunnel 335 1.27 is pseudo-device bpfilter 16 # Berkeley packet filter 336 1.27 is pseudo-device ipfilter # IP Filter package 337 1.42 is pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 338 1.42 is #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 339 1.47 sommerfe #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 340 1.51 is pseudo-device vlan # IEEE 802.1q encapsulation 341 1.57 jandberg pseudo-device bridge # simple inter-network bridging 342 1.75 perseant #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 343 1.77.2.1 skrll #pseudo-device pf # PF packet filter 344 1.77.2.1 skrll #pseudo-device pflog # PF log if 345 1.77.2.7 skrll #pseudo-device fss 4 # file system snapshot device 346 1.27 is 347 1.38 is pseudo-device view 4 # views (needed for grfcc) 348 1.49 jdolecek pseudo-device pty # pseudo-terminals 349 1.68 lukem pseudo-device clockctl # user control of clock subsystem 350 1.27 is 351 1.77.2.1 skrll #pseudo-device wsfont # wsfont(4) dynamic font loading support 352 1.77.2.10 skrll #pseudo-device wsmux # mouse & keyboard multiplexor 353 1.77.2.1 skrll 354 1.27 is pseudo-device vnd 4 # vnode pseudo-disks 355 1.77.2.10 skrll #options VND_COMPRESSION # compressed vnd(4) 356 1.27 is pseudo-device ccd 4 # concatenated disk devices 357 1.73 elric #pseudo-device cgd 4 # cryptographic disk devices 358 1.58 jdolecek pseudo-device raid 8 # RAIDframe disk driver 359 1.58 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 360 1.69 lukem # Options to enable various other RAIDframe RAID types. 361 1.69 lukem # options RF_INCLUDE_EVENODD=1 362 1.69 lukem # options RF_INCLUDE_RAID5_RS=1 363 1.69 lukem # options RF_INCLUDE_PARITYLOGGING=1 364 1.69 lukem # options RF_INCLUDE_CHAINDECLUSTER=1 365 1.69 lukem # options RF_INCLUDE_INTERDECLUSTER=1 366 1.69 lukem # options RF_INCLUDE_PARITY_DECLUSTERING=1 367 1.69 lukem # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 368 1.27 is 369 1.56 lukem pseudo-device rnd # /dev/random and in-kernel generator 370 1.56 lukem #options RND_COM # use "com" randomness as well (BROKEN) 371 1.1 is 372 1.77.2.1 skrll pseudo-device ksyms # /dev/ksyms (kernel symbols) 373 1.77.2.9 skrll pseudo-device nsmb # experimental - SMB requester 374 1.77.2.1 skrll 375 1.9 thorpej config netbsd root on ? type ? 376
Indexes created Wed Oct 22 13:09:56 GMT 2025