DRACO revision 1.124
1# $NetBSD: DRACO,v 1.124 2007/12/31 15:31:47 ad Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.62 2007/08/20 07:40:29 is Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.124 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options DRACO 41# 42# processors this kernel should support 43# 44options M68060 # support for 060 45options M060SP # MC68060 software support (Required for 060) 46 47# 48# Networking options 49# 50options INET # IP networking support (Required) 51options INET6 # IPV6 52#options IPSEC # IP security 53#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 54#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 55#options IPSEC_DEBUG # debug for IP security 56#options GATEWAY # Packet forwarding 57#options DIRECTED_BROADCAST # Broadcast across subnets 58 59#options MROUTING # Multicast routing 60#options PIM # Protocol Independent Multicast 61#options ISO,TPIP # OSI 62#options EON # OSI tunneling over IP 63options NETATALK # AppleTalk networking protocols 64#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 65 66options PPP_BSDCOMP # BSD-Compress compression support for PPP 67options PPP_DEFLATE # Deflate compression support for PPP 68options PPP_FILTER # Active filter support for PPP (requires bpf) 69options PFIL_HOOKS # pfil(9) packet filter hooks 70options IPFILTER_LOG # ipmon(8) log support 71options IPFILTER_LOOKUP # ippool(8) support 72#options IPFILTER_DEFAULT_BLOCK # block all packets by default 73 74#options ALTQ # Manipulate network interfaces' output queues 75#options ALTQ_BLUE # Stochastic Fair Blue 76#options ALTQ_CBQ # Class-Based Queueing 77#options ALTQ_CDNR # Diffserv Traffic Conditioner 78#options ALTQ_FIFOQ # First-In First-Out Queue 79#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 80#options ALTQ_HFSC # Hierarchical Fair Service Curve 81#options ALTQ_LOCALQ # Local queueing discipline 82#options ALTQ_PRIQ # Priority Queueing 83#options ALTQ_RED # Random Early Detection 84#options ALTQ_RIO # RED with IN/OUT 85#options ALTQ_WFQ # Weighted Fair Queueing 86 87# Filesystems 88file-system FFS # Berkeley fast file system 89file-system EXT2FS # second extended file system (linux) 90#file-system LFS # log-structured filesystem (experimental) 91 92file-system MFS # Memory based filesystem 93 94file-system NFS # Network File System client side code 95file-system ADOSFS # AmigaDOS file system 96file-system CD9660 # ISO 9660 + Rock Ridge filesystem 97file-system MSDOSFS # MS-DOS filesystem 98 99file-system KERNFS # kernel data-structure filesystem 100 101file-system FDESC # user file descriptor filesystem 102file-system NULLFS # loopback filesystem 103file-system OVERLAY # overlay filesystem 104#file-system PORTAL # Portal filesystem 105file-system PROCFS # /proc filesystem 106file-system UMAPFS # NULLFS + uid and gid remapping 107file-system UNION # union filesystem 108file-system SMBFS # experimental - CIFS; also needs nsmb (below) 109file-system PTYFS # /dev/pts/N support 110#file-system TMPFS # Efficient memory file-system 111#file-system UDF # experimental - OSTA UDF CD/DVD file-system 112 113# Filesystem options 114 115#options FFS_EI # FFS Endian Independant support 116 117options QUOTA # User and group quotas in FFS 118options SOFTDEP # FFS soft updates support. 119#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 120options NFSSERVER # Network File System server side code 121#options FFS_NO_SNAPSHOT # No FFS snapshot support 122 123#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 124 # immutable) behave as system flags. 125 126# 127# Compatibility options for various existing systems 128# 129 130#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 131options COMPAT_43 # compatibility with 4.3BSD interfaces 132options COMPAT_09 # compatibility with NetBSD 0.9 133options COMPAT_10 # compatibility with NetBSD 1.0 134options COMPAT_12 # compatibility with NetBSD 1.2 135options COMPAT_13 # compatibility with NetBSD 1.3 136options COMPAT_14 # compatibility with NetBSD 1.4 137options COMPAT_15 # compatibility with NetBSD 1.5 138options COMPAT_16 # compatibility with NetBSD 1.6 139options COMPAT_20 # compatibility with NetBSD 2.0 140options COMPAT_30 # NetBSD 3.0 compatibility. 141options COMPAT_40 # NetBSD 4.0 compatibility. 142options COMPAT_SUNOS # Support to run Sun (m68k) executables 143options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 144options COMPAT_NOMID # allow nonvalid machine id executables 145#options COMPAT_LINUX # Support to run Linux/m68k executables 146 147options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 148options COMPAT_AOUT_M68K # actually make some system calls work. 149options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 150 151# 152# Support for System V IPC facilities. 153# 154options SYSVSHM # System V-like shared memory 155options SYSVMSG # System V-like messages 156options SYSVSEM # System V-like semaphores 157#options SEMMNI=10 # number of semaphore identifiers 158#options SEMMNS=60 # number of semaphores in system 159#options SEMUME=10 # max number of undo entries per process 160#options SEMMNU=30 # number of undo structures in system 161options P1003_1B_SEMAPHORE # p1003.1b semaphore support 162 163# 164# Support for various kernel options 165# 166 167options KTRACE # system call tracing support 168options LKM # Loadable kernel modules 169#options INSECURE # disable kernel security levels 170options SCSIVERBOSE # human readable SCSI error messages 171options USERCONF # userconf(4) support 172options NTP # NTP phase/frequency locked loop 173#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 174 175# Enable experimental buffer queue strategy for better responsiveness under 176# high disk I/O load. Use it with caution - it's not proven to be stable yet. 177#options BUFQ_READPRIO 178#options BUFQ_PRIOCSCAN 179 180# 181# Misc. debugging options 182# 183options DDB # Kernel debugger 184#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 185#options DIAGNOSTIC # Extra kernel sanity checks 186#options DEBUG # Enable misc. kernel debugging code 187#options SYSCALL_DEBUG # debug all syscalls. 188#options SCSIDEBUG # Add SCSI debugging statements 189#options PANICBUTTON # Forced crash via keypress (?) 190 191# 192# Amiga specific options 193# 194#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 195 # first bank of RAM. (default: unlimited) 196#options NKPTADD=4 # set this for 4 additional KPT pages 197#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 198 # per 16 MB (1<<24 bytes) of RAM 199 # uncomment and decrease this, or uncomment and 200 # increase NKPTADD if you get "out of PT pages" 201 # panics. 202 203# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 204# before the 10 secondinterval ends, or that KBDRESET does work at all. 205#options KBDRESET # sync on Ctrl-Amiga-Amiga 206 207# These options improve performance with the built-in serial port 208# on slower Amigas. Try the larger buffers first then lev6_defer. 209#options SERIBUF_SIZE=4096 210#options SEROBUF_SIZE=32 211#options LEV6_DEFER # defers l6 to l4 (below serial l5) 212 213 214options RETINACONSOLE # enable code to allow retina to be console 215#options KFONT_8X11 # 8x11 font 216 217# select a font for the console according to the character set and keymap 218# you want to use 219options KFONT_CONS_ISO8859_1 220#options KFONT_CONS_ISO8859_2 221 222# This is how you would tell the kernel the A2410 oscillator frequencies: 223# The used frequencies are the defaults, and do not need option setting 224#options ULOWELL_OSC1=36000000 225#options ULOWELL_OSC2=66667000 226 227# This is how you specify the blitting speed, higher values may speed up blits 228# a littel bit. If you raise this value too much some trash may appear. 229# the commented version is the default. 230#options RH_MEMCLK=61000000 231# this option enables the 64 bit sprite which does not work 232# for quite a few people. E.g. The cursor sprite will turn to a block 233# when moved to the top of the screen in X. 234#options RH_64BIT_SPRITE 235# enables fast scroll code appears to now work on 040 systems. 236#options RETINA_SPEED_HACK 237# enables the Hardwarecursor which does not work on some systems. 238#options RH_HARDWARECURSOR 239 240 241grfrh0 at zbus0 # retina III 242 243grf2 at grfrh0 244ite2 at grf2 # terminal emulators for grfs 245 246msc0 at zbus0 # A2232 MSC multiport serial. 247mfc0 at zbus0 # MultiFaceCard I/O board 248mfcs0 at mfc0 unit 0 # MFC serial 249mfcs1 at mfc0 unit 1 # MFC serial 250#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 251#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 252#mfcs2 at mfc1 unit 0 253#mfcs3 at mfc1 unit 1 254#mfcp1 at mfc1 unit 0 255 256hyper* at zbus? # zbus HyperCom3/3+/4/4+ 257#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 258com* at hyper? port ? # Hypercom3/4 serial ports 259lpt* at hyper? port ? # Hypercom3+/4+ parallel port 260 261#options IOBZCLOCK=22118400 # default, uncomment the next line 262#options IOBZCLOCK=24000000 # if needed. 263 264iobl* at zbus? # zbus IOBlix 265com* at iobl? port ? # IOBlix serial ports 266lpt* at iobl? port ? # IOBlix parallel ports 267 268 269# 270# Keyboard device. Optionally can attach a wskbd. 271# wskbd works together with a wsdisplay so enable them both if you will. 272# Don't enable wskbd if you use ite. 273# 274# XXX in std.amiga: kbd0 at mainbus0 275 276#wskbd0 at kbd0 console ? 277 278 279 280 281#wsmouse* at ms? 282 283# 284# DraCo Mainboard devices (sans keyboard) 285# 286 287drbbc0 at mainbus0 # DraCo battery backed clock 288drsupio0 at mainbus0 # DraCo superio chip 289com* at drsupio? port ? # DraCo serial 290lpt0 at drsupio? port ? # DraCo parallel 291 292# 293# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 294# 295 296 297repulse* at zbus0 # ALiENDESiGN Repulse 298audio* at repulse? 299 300toccata* at zbus0 # MacroSystem GmbH Toccata 301audio* at toccata? 302 303# Ethernet cards: 304le* at zbus0 # A2065, Ameristar, Ariadne 305ne* at zbus0 # AriadneII, X-surf 306ed* at zbus0 # Hydra, ASDG LanRover 307es* at zbus0 # CEI A4066 EthernetPLUS 308qn* at zbus0 # Quicknet 309 310# Arcnet 311bah* at zbus0 # C=/Ameristar A2060 / 560 312 313 314drsc0 at mainbus0 # DraCo scsi 315scsibus* at drsc0 316 317 318# each hard drive from low target to high 319# will configure to the next available sd unit number 320sd* at scsibus? target ? lun ? # scsi disks 321st* at scsibus? target ? lun ? # scsi tapes 322cd* at scsibus? target ? lun ? # scsi cds 323ch* at scsibus? target ? lun ? # scsi autochangers 324ss* at scsibus? target ? lun ? # scsi scanner 325uk* at scsibus? target ? lun ? # scsi unknown 326 327pseudo-device loop # loopback network interface 328pseudo-device sl # SLIP network interfaces 329pseudo-device ppp # PPP network interfaces 330pseudo-device pppoe # PPP over Ethernet (RFC 2516) 331pseudo-device tun # network tunnel line discipline 332pseudo-device tap # virtual Ethernet 333#pseudo-device gre # generic L3 over IP tunnel 334pseudo-device bpfilter # Berkeley packet filter 335#pseudo-device carp # Common Address Redundancy Protocol 336pseudo-device ipfilter # IP Filter package 337pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 338#pseudo-device faith # IPv[46] tcp relay translation i/f 339pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 340pseudo-device vlan # IEEE 802.1q encapsulation 341pseudo-device bridge # simple inter-network bridging 342#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 343pseudo-device agr # IEEE 802.3ad link aggregation 344#pseudo-device pf # PF packet filter 345#pseudo-device pflog # PF log if 346#pseudo-device fss 4 # file system snapshot device 347 348pseudo-device view 4 # views (needed for grfcc) 349pseudo-device pty # pseudo-terminals 350pseudo-device clockctl # user control of clock subsystem 351 352#pseudo-device wsfont # wsfont(4) dynamic font loading support 353#pseudo-device wsmux # mouse & keyboard multiplexor 354 355pseudo-device vnd # vnode pseudo-disks 356#options VND_COMPRESSION # compressed vnd(4) 357pseudo-device ccd 4 # concatenated disk devices 358#pseudo-device cgd 4 # cryptographic disk devices 359pseudo-device raid 8 # RAIDframe disk driver 360options RAID_AUTOCONFIG # auto-configuration of RAID components 361# Options to enable various other RAIDframe RAID types. 362# options RF_INCLUDE_EVENODD=1 363# options RF_INCLUDE_RAID5_RS=1 364# options RF_INCLUDE_PARITYLOGGING=1 365# options RF_INCLUDE_CHAINDECLUSTER=1 366# options RF_INCLUDE_INTERDECLUSTER=1 367# options RF_INCLUDE_PARITY_DECLUSTERING=1 368# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 369 370pseudo-device rnd # /dev/random and in-kernel generator 371#options RND_COM # use "com" randomness as well (BROKEN) 372 373pseudo-device ksyms # /dev/ksyms (kernel symbols) 374pseudo-device nsmb # experimental - SMB requester 375 376# Veriexec 377# 378# a pseudo device needed for veriexec 379#pseudo-device veriexec 1 380# 381# Uncomment the fingerprint methods below that are desired. Note that 382# removing fingerprint methods will have almost no impact on the kernel 383# code size. 384# 385#options VERIFIED_EXEC_FP_RMD160 386#options VERIFIED_EXEC_FP_SHA256 387#options VERIFIED_EXEC_FP_SHA384 388#options VERIFIED_EXEC_FP_SHA512 389#options VERIFIED_EXEC_FP_SHA1 390#options VERIFIED_EXEC_FP_MD5 391 392config netbsd root on ? type ? 393