DRACO revision 1.139
1 # $NetBSD: DRACO,v 1.139 2011/07/01 15:46:30 rkujawa Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.80 2011/07/01 13:30:18 rkujawa Exp $ 7 # 8 ## 9 # GENERIC machine description file 10 # 11 # This machine description file is used to generate the default NetBSD 12 # kernel. The generic kernel does not include all options, subsystems 13 # and device drivers, but should be useful for most applications. 14 # 15 # The machine description file can be customised for your specific 16 # machine to reduce the kernel size and improve its performance. 17 # 18 # For further information on compiling NetBSD kernels, see the config(8) 19 # man page. 20 # 21 # For further information on hardware support for this architecture, see 22 # the intro(4) man page. For further information about kernel options 23 # for this architecture, see the options(4) man page. For an explanation 24 # of each device driver in this file see the section 4 man page for the 25 # device. 26 27 28 include "arch/amiga/conf/std.amiga" 29 30 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 31 32 #ident "GENERIC-$Revision: 1.139 $" 33 34 35 maxusers 8 36 options RTC_OFFSET=0 37 38 # 39 # mainboards to support (in addition to Amiga) 40 # 41 options DRACO 42 # 43 # processors this kernel should support 44 # 45 options M68060 # support for 060 46 options M060SP # MC68060 software support (Required for 060) 47 48 # 49 # Networking options 50 # 51 options INET # IP networking support (Required) 52 options INET6 # IPV6 53 #options IPSEC # IP security 54 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 55 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 56 #options IPSEC_DEBUG # debug for IP security 57 #options GATEWAY # Packet forwarding 58 #options DIRECTED_BROADCAST # Broadcast across subnets 59 60 #options MROUTING # Multicast routing 61 #options PIM # Protocol Independent Multicast 62 #options ISO,TPIP # OSI 63 #options EON # OSI tunneling over IP 64 options NETATALK # AppleTalk networking protocols 65 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 66 67 options PPP_BSDCOMP # BSD-Compress compression support for PPP 68 options PPP_DEFLATE # Deflate compression support for PPP 69 options PPP_FILTER # Active filter support for PPP (requires bpf) 70 options PFIL_HOOKS # pfil(9) packet filter hooks 71 options IPFILTER_LOG # ipmon(8) log support 72 options IPFILTER_LOOKUP # ippool(8) support 73 options IPFILTER_COMPAT # Compat for IP-Filter 74 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 75 76 #options ALTQ # Manipulate network interfaces' output queues 77 #options ALTQ_BLUE # Stochastic Fair Blue 78 #options ALTQ_CBQ # Class-Based Queueing 79 #options ALTQ_CDNR # Diffserv Traffic Conditioner 80 #options ALTQ_FIFOQ # First-In First-Out Queue 81 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 82 #options ALTQ_HFSC # Hierarchical Fair Service Curve 83 #options ALTQ_LOCALQ # Local queueing discipline 84 #options ALTQ_PRIQ # Priority Queueing 85 #options ALTQ_RED # Random Early Detection 86 #options ALTQ_RIO # RED with IN/OUT 87 #options ALTQ_WFQ # Weighted Fair Queueing 88 89 # Filesystems 90 file-system FFS # Berkeley fast file system 91 file-system EXT2FS # second extended file system (linux) 92 #file-system LFS # log-structured filesystem (experimental) 93 94 file-system MFS # Memory based filesystem 95 96 file-system NFS # Network File System client side code 97 file-system ADOSFS # AmigaDOS file system 98 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 99 file-system MSDOSFS # MS-DOS filesystem 100 101 file-system KERNFS # kernel data-structure filesystem 102 103 file-system FDESC # user file descriptor filesystem 104 file-system NULLFS # loopback filesystem 105 file-system OVERLAY # overlay filesystem 106 file-system PROCFS # /proc filesystem 107 file-system UMAPFS # NULLFS + uid and gid remapping 108 file-system UNION # union filesystem 109 file-system SMBFS # experimental - CIFS; also needs nsmb (below) 110 file-system PTYFS # /dev/pts/N support 111 file-system TMPFS # Efficient memory file-system 112 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 113 114 # Filesystem options 115 116 #options FFS_EI # FFS Endian Independent support 117 options WAPBL # File system journaling support - Experimental 118 119 options QUOTA # legacy UFS quotas 120 options QUOTA2 # new, in-filesystem UFS quotas 121 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 122 options NFSSERVER # Network File System server side code 123 #options FFS_NO_SNAPSHOT # No FFS snapshot support 124 125 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 126 # immutable) behave as system flags. 127 128 # 129 # Compatibility options for various existing systems 130 # 131 132 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 133 options COMPAT_43 # compatibility with 4.3BSD interfaces 134 options COMPAT_09 # compatibility with NetBSD 0.9 135 options COMPAT_10 # compatibility with NetBSD 1.0 136 options COMPAT_12 # compatibility with NetBSD 1.2 137 options COMPAT_13 # compatibility with NetBSD 1.3 138 options COMPAT_14 # compatibility with NetBSD 1.4 139 options COMPAT_15 # compatibility with NetBSD 1.5 140 options COMPAT_16 # compatibility with NetBSD 1.6 141 options COMPAT_20 # compatibility with NetBSD 2.0 142 options COMPAT_30 # NetBSD 3.0 compatibility. 143 options COMPAT_40 # NetBSD 4.0 compatibility. 144 options COMPAT_50 # NetBSD 5.0 compatibility. 145 options COMPAT_SUNOS # Support to run Sun (m68k) executables 146 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 147 options COMPAT_NOMID # allow nonvalid machine id executables 148 #options COMPAT_LINUX # Support to run Linux/m68k executables 149 150 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 151 options COMPAT_AOUT_M68K # actually make some system calls work. 152 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 153 154 # 155 # Support for System V IPC facilities. 156 # 157 options SYSVSHM # System V-like shared memory 158 options SYSVMSG # System V-like messages 159 options SYSVSEM # System V-like semaphores 160 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 161 162 # 163 # Support for various kernel options 164 # 165 166 options KTRACE # system call tracing support 167 #options INSECURE # disable kernel security levels 168 options SCSIVERBOSE # human readable SCSI error messages 169 options USERCONF # userconf(4) support 170 options NTP # NTP phase/frequency locked loop 171 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 172 173 # Enable experimental buffer queue strategy for better responsiveness under 174 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 175 #options BUFQ_READPRIO 176 #options BUFQ_PRIOCSCAN 177 178 # 179 # Misc. debugging options 180 # 181 options DDB # Kernel debugger 182 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 183 #options DIAGNOSTIC # Extra kernel sanity checks 184 #options DEBUG # Enable misc. kernel debugging code 185 #options SYSCALL_DEBUG # debug all syscalls. 186 #options SCSIDEBUG # Add SCSI debugging statements 187 #options PANICBUTTON # Forced crash via keypress (?) 188 189 # 190 # Amiga specific options 191 # 192 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 193 # first bank of RAM. (default: unlimited) 194 #options NKPTADD=4 # set this for 4 additional KPT pages 195 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 196 # per 16 MB (1<<24 bytes) of RAM 197 # uncomment and decrease this, or uncomment and 198 # increase NKPTADD if you get "out of PT pages" 199 # panics. 200 201 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 202 # before the 10 secondinterval ends, or that KBDRESET does work at all. 203 #options KBDRESET # sync on Ctrl-Amiga-Amiga 204 205 # These options improve performance with the built-in serial port 206 # on slower Amigas. Try the larger buffers first then lev6_defer. 207 #options SERIBUF_SIZE=4096 208 #options SEROBUF_SIZE=32 209 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 210 211 212 options RETINACONSOLE # enable code to allow retina to be console 213 #options KFONT_8X11 # 8x11 font 214 215 # select a font for the console according to the character set and keymap 216 # you want to use 217 options KFONT_CONS_ISO8859_1 218 #options KFONT_CONS_ISO8859_2 219 220 # This is how you would tell the kernel the A2410 oscillator frequencies: 221 # The used frequencies are the defaults, and do not need option setting 222 #options ULOWELL_OSC1=36000000 223 #options ULOWELL_OSC2=66667000 224 225 # This is how you specify the blitting speed, higher values may speed up blits 226 # a littel bit. If you raise this value too much some trash may appear. 227 # the commented version is the default. 228 #options RH_MEMCLK=61000000 229 # this option enables the 64 bit sprite which does not work 230 # for quite a few people. E.g. The cursor sprite will turn to a block 231 # when moved to the top of the screen in X. 232 #options RH_64BIT_SPRITE 233 # enables fast scroll code appears to now work on 040 systems. 234 #options RETINA_SPEED_HACK 235 # enables the Hardwarecursor which does not work on some systems. 236 #options RH_HARDWARECURSOR 237 238 239 grfrh0 at zbus0 # retina III 240 241 grf2 at grfrh0 242 ite2 at grf2 # terminal emulators for grfs 243 244 msc0 at zbus0 # A2232 MSC multiport serial. 245 mfc0 at zbus0 # MultiFaceCard I/O board 246 mfcs0 at mfc0 unit 0 # MFC serial 247 mfcs1 at mfc0 unit 1 # MFC serial 248 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 249 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 250 #mfcs2 at mfc1 unit 0 251 #mfcs3 at mfc1 unit 1 252 #mfcp1 at mfc1 unit 0 253 254 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 255 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 256 com* at hyper? port ? # Hypercom3/4 serial ports 257 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 258 259 #options IOBZCLOCK=22118400 # default, uncomment the next line 260 #options IOBZCLOCK=24000000 # if needed. 261 262 iobl* at zbus? # zbus IOBlix 263 com* at iobl? port ? # IOBlix serial ports 264 lpt* at iobl? port ? # IOBlix parallel ports 265 266 267 # 268 # Keyboard device. Optionally can attach a wskbd. 269 # wskbd works together with a wsdisplay so enable them both if you will. 270 # Don't enable wskbd if you use ite. 271 # 272 # XXX in std.amiga: kbd0 at mainbus0 273 274 #wskbd0 at kbd0 console ? 275 276 277 278 279 #wsmouse* at ms? 280 281 # 282 # DraCo Mainboard devices (sans keyboard) 283 # 284 285 drbbc0 at mainbus0 # DraCo battery backed clock 286 drsupio0 at mainbus0 # DraCo superio chip 287 com* at drsupio? port ? # DraCo serial 288 lpt0 at drsupio? port ? # DraCo parallel 289 290 # 291 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 292 # 293 294 295 repulse* at zbus0 # ALiENDESiGN Repulse 296 audio* at repulse? 297 298 toccata* at zbus0 # MacroSystem GmbH Toccata 299 audio* at toccata? 300 301 # Ethernet cards: 302 le* at zbus0 # A2065, Ameristar, Ariadne 303 ne* at zbus0 # AriadneII, X-surf 304 ed* at zbus0 # Hydra, ASDG LanRover 305 es* at zbus0 # CEI A4066 EthernetPLUS 306 qn* at zbus0 # Quicknet 307 308 # Arcnet 309 bah* at zbus0 # C=/Ameristar A2060 / 560 310 311 312 drsc0 at mainbus0 # DraCo scsi 313 scsibus* at drsc0 314 315 316 # each hard drive from low target to high 317 # will configure to the next available sd unit number 318 sd* at scsibus? target ? lun ? # scsi disks 319 st* at scsibus? target ? lun ? # scsi tapes 320 cd* at scsibus? target ? lun ? # scsi cds 321 ch* at scsibus? target ? lun ? # scsi autochangers 322 ss* at scsibus? target ? lun ? # scsi scanner 323 uk* at scsibus? target ? lun ? # scsi unknown 324 # 325 # accept filters 326 pseudo-device accf_data # "dataready" accept filter 327 pseudo-device accf_http # "httpready" accept filter 328 329 pseudo-device loop # loopback network interface 330 pseudo-device sl # SLIP network interfaces 331 pseudo-device ppp # PPP network interfaces 332 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 333 pseudo-device tun # network tunnel line discipline 334 pseudo-device tap # virtual Ethernet 335 #pseudo-device gre # generic L3 over IP tunnel 336 pseudo-device bpfilter # Berkeley packet filter 337 #pseudo-device carp # Common Address Redundancy Protocol 338 pseudo-device ipfilter # IP Filter package 339 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 340 #pseudo-device faith # IPv[46] tcp relay translation i/f 341 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 342 pseudo-device vlan # IEEE 802.1q encapsulation 343 pseudo-device bridge # simple inter-network bridging 344 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 345 pseudo-device agr # IEEE 802.3ad link aggregation 346 #pseudo-device pf # PF packet filter 347 #pseudo-device pflog # PF log if 348 pseudo-device fss # file system snapshot device 349 350 pseudo-device view 4 # views (needed for grfcc) 351 pseudo-device pty # pseudo-terminals 352 pseudo-device clockctl # user control of clock subsystem 353 354 #pseudo-device wsfont # wsfont(4) dynamic font loading support 355 #pseudo-device wsmux # mouse & keyboard multiplexor 356 357 pseudo-device vnd # vnode pseudo-disks 358 #options VND_COMPRESSION # compressed vnd(4) 359 pseudo-device ccd 4 # concatenated disk devices 360 #pseudo-device cgd 4 # cryptographic disk devices 361 pseudo-device raid 8 # RAIDframe disk driver 362 options RAID_AUTOCONFIG # auto-configuration of RAID components 363 # Options to enable various other RAIDframe RAID types. 364 # options RF_INCLUDE_EVENODD=1 365 # options RF_INCLUDE_RAID5_RS=1 366 # options RF_INCLUDE_PARITYLOGGING=1 367 # options RF_INCLUDE_CHAINDECLUSTER=1 368 # options RF_INCLUDE_INTERDECLUSTER=1 369 # options RF_INCLUDE_PARITY_DECLUSTERING=1 370 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 371 372 pseudo-device rnd # /dev/random and in-kernel generator 373 #options RND_COM # use "com" randomness as well (BROKEN) 374 375 pseudo-device ksyms # /dev/ksyms (kernel symbols) 376 pseudo-device nsmb # experimental - SMB requester 377 378 # Veriexec 379 # 380 # a pseudo device needed for veriexec 381 #pseudo-device veriexec 1 382 # 383 # Uncomment the fingerprint methods below that are desired. Note that 384 # removing fingerprint methods will have almost no impact on the kernel 385 # code size. 386 # 387 #options VERIFIED_EXEC_FP_RMD160 388 #options VERIFIED_EXEC_FP_SHA256 389 #options VERIFIED_EXEC_FP_SHA384 390 #options VERIFIED_EXEC_FP_SHA512 391 #options VERIFIED_EXEC_FP_SHA1 392 #options VERIFIED_EXEC_FP_MD5 393 394 config netbsd root on ? type ? 395
Indexes created Tue Sep 30 11:09:46 GMT 2025