DRACO revision 1.32
1# $NetBSD: DRACO,v 1.32 1999/04/01 20:24:29 is Exp $ 2# 3# This file was automatically created. Changes will be 4# lost when running make in this directory. 5# 6# Created from: 7#$ NetBSD: GENERIC,v 1.119 1999/03/24 22:24:42 is Exp $ 8 9include "arch/amiga/conf/std.amiga" 10 11maxusers 8 12options RTC_OFFSET=0 13 14#mainboards to support (in addition to Amiga) 15 16options DRACO 17 18#processors this kernel should support 19 20options M68060 # support for 060 21options M060SP # MC68060 software support (Required for 060) 22 23#Networking options 24 25options INET # IP networking support (Required) 26#options GATEWAY # Packet forwarding 27#options DIRECTED_BROADCAST # Broadcast across subnets 28#options MROUTING # Multicast routing 29options NS # XNS 30#options NSIP # XNS tunneling over IP 31options ISO,TPIP # OSI 32options EON # OSI tunneling over IP 33options CCITT,LLC,HDLC # X.25 34options NETATALK # AppleTalk networking protocols 35options PPP_BSDCOMP # BSD-Compress compression support for PPP 36options PPP_DEFLATE # Deflate compression support for PPP 37options PPP_FILTER # Active filter support for PPP (requires bpf) 38options PFIL_HOOKS # pfil(9) packet filter hooks 39options IPFILTER_LOG # ipmon(8) log support 40 41file-system FFS # Berkeley fast file system 42#file-system LFS # log-structured filesystem (experimental) 43file-system MFS # Memory based filesystem 44file-system NFS # Network File System client side code 45file-system ADOSFS # AmigaDOS file system 46file-system CD9660 # ISO 9660 + Rock Ridge filesystem 47file-system MSDOSFS # MS-DOS filesystem 48file-system FDESC # user file descriptor filesystem 49file-system KERNFS # kernel data-structure filesystem 50file-system NULLFS # loopback filesystem 51#file-system PORTAL # Portal filesystem 52file-system PROCFS # /proc filesystem 53file-system UMAPFS # NULLFS + uid and gid remapping 54file-system UNION # union filesystem 55 56#Filesystem options 57options NFSSERVER # Network File System server side code 58options QUOTA # User and group quotas in FFS 59#options FFS_EI # FFS Endian Independant support 60 61#Compatability options for various existing systems 62 63options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 64options COMPAT_43 # compatibility with 4.3BSD interfaces 65options COMPAT_09 # compatibility with NetBSD 0.9 66options COMPAT_10 # compatibility with NetBSD 1.0 67options COMPAT_12 # compatibility with NetBSD 1.2 68options COMPAT_13 # compatibility with NetBSD 1.3 69options COMPAT_SUNOS # Support to run Sun (m68k) executables 70options COMPAT_NOMID # allow nonvalid machine id executables 71#options COMPAT_LINUX # Support to run Linux/m68k executables 72#options EXEC_ELF32 # 32-bit ELF executables (Linux) 73 74#Support for System V IPC facilities. 75 76options SYSVSHM # System V-like shared memory 77options SYSVMSG # System V-like messages 78options SYSVSEM # System V-like semaphores 79 80#Support for various kernel options 81 82options KTRACE # system call tracing support 83options LKM # Loadable kernel modules 84options NKMEMCLUSTERS=256 # Size of kernel malloc area 85options UCONSOLE # anyone can redirect a virtual console 86#options INSECURE # allow, among other insecure stuff, LKM 87 # loading in multi-user mode. 88options SCSIVERBOSE # Verbose SCSI errors 89 90options NTP # NTP phase/frequency locked loop 91 92#Misc. debugging options 93 94options DDB # Kernel debugger 95#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 96options DIAGNOSTIC # Extra kernel sanity checks 97#options DEBUG # Enable misc. kernel debugging code 98#options SYSCALL_DEBUG # debug all syscalls. 99#options SCSIDEBUG # Add SCSI debugging statements 100#options PANICBUTTON # Forced crash via keypress (???) 101 102#Amiga specific options 103 104#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 105 # first bank of RAM. (default: unlimited) 106#options NKPTADD=4 # set this for 4 additional KPT pages 107#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 108 # per 16 MB (1<<24 bytes) of RAM 109 # define and decrease this, or define and 110 # increase NKPTADD if you get "out of PT pages" 111 # panics. 112 113#ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 114#before the 10 secondinterval ends, or that KBDRESET does work at all. 115#options KBDRESET # sync on Ctrl-Amiga-Amiga 116 117#These options improve performance with the built-in serial port 118#on slower Amigas. Try the larger buffers first then lev6_defer. 119#options SERIBUF_SIZE=4096 120#options SEROBUF_SIZE=32 121#options LEV6_DEFER # defers l6 to l4 (below serial l5) 122 123options RETINACONSOLE # enable code to allow retina to be console 124 125#options KFONT_8X11 # 8x11 font 126 127#This is how you would tell the kernel the A2410 oscillator frequencies: 128#The used frequencies are the defaults, and do not need option setting 129#options ULOWELL_OSC1=36000000 130#options ULOWELL_OSC2=66667000 131 132#This is how you specify the blitting speed, higher values may speed up blits 133#a littel bit. If you raise this value too much some trash may appear. 134#the commented version is the default. 135#options RH_MEMCLK=61000000 136#this option enables the 64 bit sprite which does not work 137#for quite a few people. E.g. The cursor sprite will turn to a block 138#when moved to the top of the screen in X. 139#options RH_64BIT_SPRITE 140#enables fast scroll code appears to now work on 040 systems. 141#options RETINA_SPEED_HACK 142#enables the Hardwarecursor which does not work on some systems. 143#options RH_HARDWARECURSOR 144 145grfrh0 at zbus0 # retina III 146 147grf2 at grfrh0 148 149ite2 at grf2 # terminal emulators for grfs 150 151msc0 at zbus0 # A2232 MSC multiport serial. 152mfc0 at zbus0 # MultiFaceCard I/O board 153mfcs0 at mfc0 unit 0 # MFC serial 154mfcs1 at mfc0 unit 1 # MFC serial 155#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 156#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 157#mfcs2 at mfc1 unit 0 158#mfcs3 at mfc1 unit 1 159#mfcp1 at mfc1 unit 0 160 161hyper* at zbus? # zbus HyperCom3 + HyperCom4 162#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 163com* at hyper? port ? # Hypercom3/4 serial ports 164#lpt* at hyper? port ? # not yet: Hypercom3 parallel port 165 166#DraCo Mainboard devices (sans keyboard) 167 168drbbc0 at mainbus0 # DraCo battery backed clock 169drsupio0 at mainbus0 # DraCo superio chip 170com* at drsupio? port ? # DraCo serial 171lpt0 at drsupio? port ? # DraCo parallel 172 173#Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 174 175#Ethernet cards: 176le* at zbus0 # A2065, Ameristar, Ariadne 177ne* at zbus0 # AriadneII 178ed0 at zbus0 # Hydra, ASDG LanRover 179es0 at zbus0 # CEI A4066 EthernetPLUS 180qn0 at zbus0 # Quicknet 181 182bah* at zbus0 # C=/Ameristar A2060 / 560 183 184#Greater Valley Product Bus 185gvpbus* at zbus0 186 187drsc0 at mainbus0 # DraCo scsi 188scsibus* at drsc0 189 190#each hard drive from low target to high 191#will configure to the next available sd unit number 192sd* at scsibus? target ? lun ? # scsi disks 193st* at scsibus? target ? lun ? # scsi tapes 194cd* at scsibus? target ? lun ? # scsi cds 195ss* at scsibus? target ? lun ? # scsi scanner 196ch* at scsibus? target ? lun ? # scsi autochangers 197uk* at scsibus? target ? lun ? # scsi unknown 198 199pseudo-device loop # loopback network interface 200pseudo-device sl 1 # SLIP network interfaces 201pseudo-device ppp 1 # PPP network interfaces 202pseudo-device tun 1 # network tunnel line discipline 203#pseudo-device gre 2 # generic L3 over IP tunnel 204pseudo-device bpfilter 16 # Berkeley packet filter 205pseudo-device ipfilter # IP Filter package 206 207pseudo-device view 10 # views 208pseudo-device pty 16 # pseudo ptys 209 210pseudo-device vnd 4 # vnode pseudo-disks 211pseudo-device ccd 4 # concatenated disk devices 212#pseudo-device raid 4 # RAIDframe disk driver 213 214#rnd is EXPERIMENTAL at this point. 215#pseudo-device rnd # /dev/random and in-kernel generator 216#options RND_COM # use "com" randomness as well (BROKEN) 217 218config netbsd root on ? type ? 219 220