DRACO revision 1.55
1 # $NetBSD: DRACO,v 1.55 2001/08/25 21:19:21 is Exp $ 2 # 3 # This file was automatically created. Changes will be 4 # lost when running make in this directory. 5 # 6 # Created from: #NetBSD: GENERIC,v 1.161 2001/08/25 21:15:46 is Exp $ 7 8 include "arch/amiga/conf/std.amiga" 9 10 #ident "GENERIC-$Revision: 1.55 $" 11 12 maxusers 8 13 options RTC_OFFSET=0 14 15 #mainboards to support (in addition to Amiga) 16 17 options DRACO 18 19 #processors this kernel should support 20 21 options M68060 # support for 060 22 options M060SP # MC68060 software support (Required for 060) 23 24 #Networking options 25 26 options INET # IP networking support (Required) 27 options INET6 # IPV6 28 #options IPSEC # IP security 29 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 30 #options IPSEC_DEBUG # debug for IP security 31 #options GATEWAY # Packet forwarding 32 #options DIRECTED_BROADCAST # Broadcast across subnets 33 34 #options MROUTING # Multicast routing 35 options NS # XNS 36 #options NSIP # XNS tunneling over IP 37 options ISO,TPIP # OSI 38 #options EON # OSI tunneling over IP 39 options CCITT,LLC,HDLC # X.25 40 options NETATALK # AppleTalk networking protocols 41 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 42 43 options PPP_BSDCOMP # BSD-Compress compression support for PPP 44 options PPP_DEFLATE # Deflate compression support for PPP 45 options PPP_FILTER # Active filter support for PPP (requires bpf) 46 options PFIL_HOOKS # pfil(9) packet filter hooks 47 options IPFILTER_LOG # ipmon(8) log support 48 49 file-system FFS # Berkeley fast file system 50 file-system EXT2FS # second extended file system (linux) 51 #file-system LFS # log-structured filesystem (experimental) 52 53 file-system MFS # Memory based filesystem 54 55 file-system NFS # Network File System client side code 56 file-system ADOSFS # AmigaDOS file system 57 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 58 file-system MSDOSFS # MS-DOS filesystem 59 60 file-system KERNFS # kernel data-structure filesystem 61 62 file-system FDESC # user file descriptor filesystem 63 file-system NULLFS # loopback filesystem 64 file-system OVERLAY # overlay filesystem 65 #file-system PORTAL # Portal filesystem 66 file-system PROCFS # /proc filesystem 67 file-system UMAPFS # NULLFS + uid and gid remapping 68 file-system UNION # union filesystem 69 70 #Filesystem options 71 72 #options FFS_EI # FFS Endian Independant support 73 74 options QUOTA # User and group quotas in FFS 75 options SOFTDEP # FFS soft updates support. 76 options NFSSERVER # Network File System server side code 77 78 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 79 # immutable) behave as system flags. 80 81 #Compatibility options for various existing systems 82 83 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 84 options COMPAT_43 # compatibility with 4.3BSD interfaces 85 options COMPAT_09 # compatibility with NetBSD 0.9 86 options COMPAT_10 # compatibility with NetBSD 1.0 87 options COMPAT_12 # compatibility with NetBSD 1.2 88 options COMPAT_13 # compatibility with NetBSD 1.3 89 options COMPAT_14 # compatibility with NetBSD 1.4 90 options COMPAT_SUNOS # Support to run Sun (m68k) executables 91 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 92 options COMPAT_NOMID # allow nonvalid machine id executables 93 #options COMPAT_LINUX # Support to run Linux/m68k executables 94 options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 95 96 #Support for System V IPC facilities. 97 98 options SYSVSHM # System V-like shared memory 99 options SYSVMSG # System V-like messages 100 options SYSVSEM # System V-like semaphores 101 #options SEMMNI=10 # number of semaphore identifiers 102 #options SEMMNS=60 # number of semaphores in system 103 #options SEMUME=10 # max number of undo entries per process 104 #options SEMMNU=30 # number of undo structures in system 105 106 #Support for various kernel options 107 108 options KTRACE # system call tracing support 109 options LKM # Loadable kernel modules 110 options UCONSOLE # anyone can redirect a virtual console 111 112 #options INSECURE # allow, among other insecure stuff, LKM 113 # loading in multi-user mode. 114 options SCSIVERBOSE # Verbose SCSI errors 115 116 options NTP # NTP phase/frequency locked loop 117 118 #Misc. debugging options 119 120 options DDB # Kernel debugger 121 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 122 options DIAGNOSTIC # Extra kernel sanity checks 123 #options DEBUG # Enable misc. kernel debugging code 124 #options SYSCALL_DEBUG # debug all syscalls. 125 #options SCSIDEBUG # Add SCSI debugging statements 126 #options PANICBUTTON # Forced crash via keypress (???) 127 128 #Amiga specific options 129 130 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 131 # first bank of RAM. (default: unlimited) 132 #options NKPTADD=4 # set this for 4 additional KPT pages 133 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 134 # per 16 MB (1<<24 bytes) of RAM 135 # define and decrease this, or define and 136 # increase NKPTADD if you get "out of PT pages" 137 # panics. 138 139 #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 140 #before the 10 secondinterval ends, or that KBDRESET does work at all. 141 #options KBDRESET # sync on Ctrl-Amiga-Amiga 142 143 #These options improve performance with the built-in serial port 144 #on slower Amigas. Try the larger buffers first then lev6_defer. 145 #options SERIBUF_SIZE=4096 146 #options SEROBUF_SIZE=32 147 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 148 149 options RETINACONSOLE # enable code to allow retina to be console 150 151 #options KFONT_8X11 # 8x11 font 152 153 #This is how you would tell the kernel the A2410 oscillator frequencies: 154 #The used frequencies are the defaults, and do not need option setting 155 #options ULOWELL_OSC1=36000000 156 #options ULOWELL_OSC2=66667000 157 158 #This is how you specify the blitting speed, higher values may speed up blits 159 #a littel bit. If you raise this value too much some trash may appear. 160 #the commented version is the default. 161 #options RH_MEMCLK=61000000 162 #this option enables the 64 bit sprite which does not work 163 #for quite a few people. E.g. The cursor sprite will turn to a block 164 #when moved to the top of the screen in X. 165 #options RH_64BIT_SPRITE 166 #enables fast scroll code appears to now work on 040 systems. 167 #options RETINA_SPEED_HACK 168 #enables the Hardwarecursor which does not work on some systems. 169 #options RH_HARDWARECURSOR 170 171 grfrh0 at zbus0 # retina III 172 173 grf2 at grfrh0 174 175 ite2 at grf2 # terminal emulators for grfs 176 177 msc0 at zbus0 # A2232 MSC multiport serial. 178 mfc0 at zbus0 # MultiFaceCard I/O board 179 mfcs0 at mfc0 unit 0 # MFC serial 180 mfcs1 at mfc0 unit 1 # MFC serial 181 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 182 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 183 #mfcs2 at mfc1 unit 0 184 #mfcs3 at mfc1 unit 1 185 #mfcp1 at mfc1 unit 0 186 187 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 188 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 189 com* at hyper? port ? # Hypercom3/4 serial ports 190 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 191 192 #options IOBZCLOCK=22118400 # default, uncomment the next line 193 #options IOBZCLOCK=24000000 # if needed. 194 195 iobl* at zbus? # zbus IOBlix 196 com* at iobl? port ? # IOBlix serial ports 197 lpt* at iobl? port ? # IOBlix parallel ports 198 199 #Keyboard device. Optionally can attach a wskbd. 200 #wskbd works together with a wsdisplay so enable them both if you will. 201 #Don't enable wskbd if you use ite. 202 203 #XXX in std.amiga: kbd0 at mainbus0 204 #wskbd0 at kbd0 console ? 205 206 #DraCo Mainboard devices (sans keyboard) 207 208 drbbc0 at mainbus0 # DraCo battery backed clock 209 drsupio0 at mainbus0 # DraCo superio chip 210 com* at drsupio? port ? # DraCo serial 211 lpt0 at drsupio? port ? # DraCo parallel 212 213 #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 214 215 repulse* at zbus0 # ALiENDESiGN Repulse 216 audio* at repulse? 217 218 #Ethernet cards: 219 le* at zbus0 # A2065, Ameristar, Ariadne 220 ne* at zbus0 # AriadneII, X-surf 221 ed* at zbus0 # Hydra, ASDG LanRover 222 es* at zbus0 # CEI A4066 EthernetPLUS 223 qn* at zbus0 # Quicknet 224 225 bah* at zbus0 # C=/Ameristar A2060 / 560 226 227 drsc0 at mainbus0 # DraCo scsi 228 scsibus* at drsc0 229 230 #each hard drive from low target to high 231 #will configure to the next available sd unit number 232 sd* at scsibus? target ? lun ? # scsi disks 233 st* at scsibus? target ? lun ? # scsi tapes 234 cd* at scsibus? target ? lun ? # scsi cds 235 ch* at scsibus? target ? lun ? # scsi autochangers 236 237 ss* at scsibus? target ? lun ? # scsi scanner 238 uk* at scsibus? target ? lun ? # scsi unknown 239 240 pseudo-device loop # loopback network interface 241 pseudo-device sl 1 # SLIP network interfaces 242 pseudo-device ppp 1 # PPP network interfaces 243 pseudo-device tun 1 # network tunnel line discipline 244 #pseudo-device gre 2 # generic L3 over IP tunnel 245 #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 246 pseudo-device bpfilter 16 # Berkeley packet filter 247 pseudo-device ipfilter # IP Filter package 248 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 249 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 250 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 251 pseudo-device vlan # IEEE 802.1q encapsulation 252 253 pseudo-device view 4 # views (needed for grfcc) 254 pseudo-device pty # pseudo-terminals 255 256 pseudo-device vnd 4 # vnode pseudo-disks 257 pseudo-device ccd 4 # concatenated disk devices 258 #pseudo-device raid 4 # RAIDframe disk driver 259 #options RAID_AUTOCONFIG # auto-configuration of RAID components 260 261 pseudo-device rnd # /dev/random and in-kernel generator 262 #options RND_COM # use "com" randomness as well (BROKEN) 263 264 config netbsd root on ? type ? 265
Indexes created Tue Sep 30 20:09:53 GMT 2025