DRACO revision 1.56
1# $NetBSD: DRACO,v 1.56 2001/11/20 12:56:20 lukem Exp $ 2# 3# This file was automatically created. Changes will be 4# lost when running make in this directory. 5# 6# Created from: #NetBSD: GENERIC,v 1.161 2001/08/25 21:15:46 is Exp $ 7 8include "arch/amiga/conf/std.amiga" 9 10#ident "GENERIC-$Revision: 1.56 $" 11 12maxusers 8 13options RTC_OFFSET=0 14 15#mainboards to support (in addition to Amiga) 16 17options DRACO 18 19#processors this kernel should support 20 21options M68060 # support for 060 22options M060SP # MC68060 software support (Required for 060) 23 24#Networking options 25 26options INET # IP networking support (Required) 27options INET6 # IPV6 28#options IPSEC # IP security 29#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 30#options IPSEC_DEBUG # debug for IP security 31#options GATEWAY # Packet forwarding 32#options DIRECTED_BROADCAST # Broadcast across subnets 33 34#options MROUTING # Multicast routing 35options NS # XNS 36#options NSIP # XNS tunneling over IP 37options ISO,TPIP # OSI 38#options EON # OSI tunneling over IP 39options CCITT,LLC,HDLC # X.25 40options NETATALK # AppleTalk networking protocols 41#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 42 43options PPP_BSDCOMP # BSD-Compress compression support for PPP 44options PPP_DEFLATE # Deflate compression support for PPP 45options PPP_FILTER # Active filter support for PPP (requires bpf) 46options PFIL_HOOKS # pfil(9) packet filter hooks 47options IPFILTER_LOG # ipmon(8) log support 48 49file-system FFS # Berkeley fast file system 50file-system EXT2FS # second extended file system (linux) 51#file-system LFS # log-structured filesystem (experimental) 52 53file-system MFS # Memory based filesystem 54 55file-system NFS # Network File System client side code 56file-system ADOSFS # AmigaDOS file system 57file-system CD9660 # ISO 9660 + Rock Ridge filesystem 58file-system MSDOSFS # MS-DOS filesystem 59 60file-system KERNFS # kernel data-structure filesystem 61 62file-system FDESC # user file descriptor filesystem 63file-system NULLFS # loopback filesystem 64file-system OVERLAY # overlay filesystem 65#file-system PORTAL # Portal filesystem 66file-system PROCFS # /proc filesystem 67file-system UMAPFS # NULLFS + uid and gid remapping 68file-system UNION # union filesystem 69 70#Filesystem options 71 72#options FFS_EI # FFS Endian Independant support 73 74options QUOTA # User and group quotas in FFS 75options SOFTDEP # FFS soft updates support. 76options NFSSERVER # Network File System server side code 77 78#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 79 # immutable) behave as system flags. 80 81#Compatibility options for various existing systems 82 83#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 84options COMPAT_43 # compatibility with 4.3BSD interfaces 85options COMPAT_09 # compatibility with NetBSD 0.9 86options COMPAT_10 # compatibility with NetBSD 1.0 87options COMPAT_12 # compatibility with NetBSD 1.2 88options COMPAT_13 # compatibility with NetBSD 1.3 89options COMPAT_14 # compatibility with NetBSD 1.4 90options COMPAT_SUNOS # Support to run Sun (m68k) executables 91options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 92options COMPAT_NOMID # allow nonvalid machine id executables 93#options COMPAT_LINUX # Support to run Linux/m68k executables 94options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 95 96#Support for System V IPC facilities. 97 98options SYSVSHM # System V-like shared memory 99options SYSVMSG # System V-like messages 100options SYSVSEM # System V-like semaphores 101#options SEMMNI=10 # number of semaphore identifiers 102#options SEMMNS=60 # number of semaphores in system 103#options SEMUME=10 # max number of undo entries per process 104#options SEMMNU=30 # number of undo structures in system 105 106#Support for various kernel options 107 108options KTRACE # system call tracing support 109options LKM # Loadable kernel modules 110options UCONSOLE # anyone can redirect a virtual console 111 112#options INSECURE # allow, among other insecure stuff, LKM 113 # loading in multi-user mode. 114options SCSIVERBOSE # Verbose SCSI errors 115 116options NTP # NTP phase/frequency locked loop 117 118#Misc. debugging options 119 120options DDB # Kernel debugger 121#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 122options DIAGNOSTIC # Extra kernel sanity checks 123#options DEBUG # Enable misc. kernel debugging code 124#options SYSCALL_DEBUG # debug all syscalls. 125#options SCSIDEBUG # Add SCSI debugging statements 126#options PANICBUTTON # Forced crash via keypress (???) 127 128#Amiga specific options 129 130#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 131 # first bank of RAM. (default: unlimited) 132#options NKPTADD=4 # set this for 4 additional KPT pages 133#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 134 # per 16 MB (1<<24 bytes) of RAM 135 # define and decrease this, or define and 136 # increase NKPTADD if you get "out of PT pages" 137 # panics. 138 139#ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 140#before the 10 secondinterval ends, or that KBDRESET does work at all. 141#options KBDRESET # sync on Ctrl-Amiga-Amiga 142 143#These options improve performance with the built-in serial port 144#on slower Amigas. Try the larger buffers first then lev6_defer. 145#options SERIBUF_SIZE=4096 146#options SEROBUF_SIZE=32 147#options LEV6_DEFER # defers l6 to l4 (below serial l5) 148 149options RETINACONSOLE # enable code to allow retina to be console 150 151#options KFONT_8X11 # 8x11 font 152 153#This is how you would tell the kernel the A2410 oscillator frequencies: 154#The used frequencies are the defaults, and do not need option setting 155#options ULOWELL_OSC1=36000000 156#options ULOWELL_OSC2=66667000 157 158#This is how you specify the blitting speed, higher values may speed up blits 159#a littel bit. If you raise this value too much some trash may appear. 160#the commented version is the default. 161#options RH_MEMCLK=61000000 162#this option enables the 64 bit sprite which does not work 163#for quite a few people. E.g. The cursor sprite will turn to a block 164#when moved to the top of the screen in X. 165#options RH_64BIT_SPRITE 166#enables fast scroll code appears to now work on 040 systems. 167#options RETINA_SPEED_HACK 168#enables the Hardwarecursor which does not work on some systems. 169#options RH_HARDWARECURSOR 170 171grfrh0 at zbus0 # retina III 172 173grf2 at grfrh0 174 175ite2 at grf2 # terminal emulators for grfs 176 177msc0 at zbus0 # A2232 MSC multiport serial. 178mfc0 at zbus0 # MultiFaceCard I/O board 179mfcs0 at mfc0 unit 0 # MFC serial 180mfcs1 at mfc0 unit 1 # MFC serial 181#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 182#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 183#mfcs2 at mfc1 unit 0 184#mfcs3 at mfc1 unit 1 185#mfcp1 at mfc1 unit 0 186 187hyper* at zbus? # zbus HyperCom3/3+/4/4+ 188#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 189com* at hyper? port ? # Hypercom3/4 serial ports 190lpt* at hyper? port ? # Hypercom3+/4+ parallel port 191 192#options IOBZCLOCK=22118400 # default, uncomment the next line 193#options IOBZCLOCK=24000000 # if needed. 194 195iobl* at zbus? # zbus IOBlix 196com* at iobl? port ? # IOBlix serial ports 197lpt* at iobl? port ? # IOBlix parallel ports 198 199#Keyboard device. Optionally can attach a wskbd. 200#wskbd works together with a wsdisplay so enable them both if you will. 201#Don't enable wskbd if you use ite. 202 203#XXX in std.amiga: kbd0 at mainbus0 204#wskbd0 at kbd0 console ? 205 206#DraCo Mainboard devices (sans keyboard) 207 208drbbc0 at mainbus0 # DraCo battery backed clock 209drsupio0 at mainbus0 # DraCo superio chip 210com* at drsupio? port ? # DraCo serial 211lpt0 at drsupio? port ? # DraCo parallel 212 213#Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 214 215repulse* at zbus0 # ALiENDESiGN Repulse 216audio* at repulse? 217 218#Ethernet cards: 219le* at zbus0 # A2065, Ameristar, Ariadne 220ne* at zbus0 # AriadneII, X-surf 221ed* at zbus0 # Hydra, ASDG LanRover 222es* at zbus0 # CEI A4066 EthernetPLUS 223qn* at zbus0 # Quicknet 224 225bah* at zbus0 # C=/Ameristar A2060 / 560 226 227drsc0 at mainbus0 # DraCo scsi 228scsibus* at drsc0 229 230#each hard drive from low target to high 231#will configure to the next available sd unit number 232sd* at scsibus? target ? lun ? # scsi disks 233st* at scsibus? target ? lun ? # scsi tapes 234cd* at scsibus? target ? lun ? # scsi cds 235ch* at scsibus? target ? lun ? # scsi autochangers 236 237ss* at scsibus? target ? lun ? # scsi scanner 238uk* at scsibus? target ? lun ? # scsi unknown 239 240pseudo-device loop # loopback network interface 241pseudo-device sl 1 # SLIP network interfaces 242pseudo-device ppp 1 # PPP network interfaces 243pseudo-device tun 1 # network tunnel line discipline 244#pseudo-device gre 2 # generic L3 over IP tunnel 245#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 246pseudo-device bpfilter 16 # Berkeley packet filter 247pseudo-device ipfilter # IP Filter package 248pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 249#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 250#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 251pseudo-device vlan # IEEE 802.1q encapsulation 252 253pseudo-device view 4 # views (needed for grfcc) 254pseudo-device pty # pseudo-terminals 255 256pseudo-device vnd 4 # vnode pseudo-disks 257pseudo-device ccd 4 # concatenated disk devices 258#pseudo-device raid 4 # RAIDframe disk driver 259#options RAID_AUTOCONFIG # auto-configuration of RAID components 260 261pseudo-device rnd # /dev/random and in-kernel generator 262#options RND_COM # use "com" randomness as well (BROKEN) 263 264config netbsd root on ? type ? 265