DRACO revision 1.57
1# $NetBSD: DRACO,v 1.57 2002/01/14 18:56:35 jandberg Exp $
2#
3# This file was automatically created. Changes will be
4# lost when running make in this directory.
5#
6# Created from: #NetBSD: GENERIC,v 1.166 2002/01/13 23:24:22 jandberg Exp $
7
8#GENERIC machine description file
9
10#This machine description file is used to generate the default NetBSD
11#kernel.  The generic kernel does not include all options, subsystems
12#and device drivers, but should be useful for most applications.
13
14#The machine description file can be customised for your specific
15#machine to reduce the kernel size and improve its performance.
16
17#For further information on compiling NetBSD kernels, see the config(8)
18#man page.
19
20#For further information on hardware support for this architecture, see
21#the intro(4) man page.  For further information about kernel options
22#for this architecture, see the options(4) man page.  For an explanation
23#of each device driver in this file see the section 4 man page for the
24#device.
25include "arch/amiga/conf/std.amiga"
26
27#ident  		"GENERIC-$Revision: 1.57 $"
28
29maxusers	8
30options 	RTC_OFFSET=0
31
32#mainboards to support (in addition to Amiga)
33
34options 	DRACO
35
36#processors this kernel should support
37
38options 	M68060		# support for 060
39options 	M060SP		# MC68060 software support (Required for 060)
40
41#Networking options
42
43options 	INET		# IP networking support (Required)
44options 	INET6		# IPV6
45#options 	IPSEC		# IP security
46#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
47#options 	IPSEC_DEBUG	# debug for IP security
48#options 	GATEWAY		# Packet forwarding
49#options 	DIRECTED_BROADCAST	# Broadcast across subnets
50
51#options 	MROUTING	# Multicast routing
52options 	NS		# XNS
53#options 	NSIP		# XNS tunneling over IP
54options 	ISO,TPIP	# OSI
55#options 	EON		# OSI tunneling over IP
56options 	CCITT,LLC,HDLC	# X.25
57options 	NETATALK	# AppleTalk networking protocols
58#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
59
60options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
61options 	PPP_DEFLATE	# Deflate compression support for PPP
62options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
63options 	PFIL_HOOKS	# pfil(9) packet filter hooks
64options 	IPFILTER_LOG	# ipmon(8) log support
65
66file-system 	FFS		# Berkeley fast file system
67file-system 	EXT2FS		# second extended file system (linux)
68#file-system 	LFS		# log-structured filesystem (experimental)
69
70file-system 	MFS		# Memory based filesystem
71
72file-system 	NFS		# Network File System client side code
73file-system 	ADOSFS		# AmigaDOS file system
74file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
75file-system 	MSDOSFS		# MS-DOS filesystem
76
77file-system 	KERNFS		# kernel data-structure filesystem
78
79file-system 	FDESC		# user file descriptor filesystem
80file-system 	NULLFS		# loopback filesystem
81file-system 	OVERLAY		# overlay filesystem
82#file-system 	PORTAL		# Portal filesystem
83file-system 	PROCFS		# /proc filesystem
84file-system 	UMAPFS		# NULLFS + uid and gid remapping
85file-system 	UNION		# union filesystem
86
87#Filesystem options
88
89#options 	FFS_EI		# FFS Endian Independant support
90
91options 	QUOTA		# User and group quotas in FFS
92options 	SOFTDEP		# FFS soft updates support.
93options 	NFSSERVER	# Network File System server side code
94
95#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
96				# immutable) behave as system flags.
97
98#Compatibility options for various existing systems
99
100#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
101options 	COMPAT_43	# compatibility with 4.3BSD interfaces
102options 	COMPAT_09	# compatibility with NetBSD 0.9
103options 	COMPAT_10	# compatibility with NetBSD 1.0
104options 	COMPAT_12	# compatibility with NetBSD 1.2
105options 	COMPAT_13	# compatibility with NetBSD 1.3
106options 	COMPAT_14	# compatibility with NetBSD 1.4
107options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
108options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
109options 	COMPAT_NOMID	# allow nonvalid machine id executables
110#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
111options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
112
113#Support for System V IPC facilities.
114
115options 	SYSVSHM		# System V-like shared memory
116options 	SYSVMSG		# System V-like messages
117options 	SYSVSEM		# System V-like semaphores
118#options 	SEMMNI=10	# number of semaphore identifiers
119#options 	SEMMNS=60	# number of semaphores in system
120#options 	SEMUME=10	# max number of undo entries per process
121#options 	SEMMNU=30	# number of undo structures in system
122
123#Support for various kernel options
124
125options 	KTRACE		# system call tracing support
126options 	LKM		# Loadable kernel modules
127options 	UCONSOLE	# anyone can redirect a virtual console
128
129#options 	INSECURE	# allow, among other insecure stuff, LKM
130				# loading in multi-user mode.
131options 	SCSIVERBOSE	# Verbose SCSI errors
132
133options 	NTP		# NTP phase/frequency locked loop
134
135#Misc. debugging options
136
137options 	DDB		# Kernel debugger
138#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
139options 	DIAGNOSTIC	# Extra kernel sanity checks
140#options 	DEBUG		# Enable misc. kernel debugging code
141#options 	SYSCALL_DEBUG	# debug all syscalls.
142#options 	SCSIDEBUG	# Add SCSI debugging statements
143#options 	PANICBUTTON	# Forced crash via keypress (???)
144
145#Amiga specific options
146
147#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
148				# first bank of RAM. (default: unlimited)
149#options 	NKPTADD=4	# set this for 4 additional KPT pages
150#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
151				# per 16 MB (1<<24 bytes) of RAM
152				# define and decrease this, or define and
153				# increase NKPTADD if you get "out of PT pages"
154				# panics.
155
156#ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
157#before the 10 secondinterval ends, or that KBDRESET does work at all.
158#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
159
160#These options improve performance with the built-in serial port
161#on slower Amigas.  Try the larger buffers first then lev6_defer.
162#options 	SERIBUF_SIZE=4096
163#options 	SEROBUF_SIZE=32
164#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
165
166options 	RETINACONSOLE	# enable code to allow retina to be console
167
168#options 	KFONT_8X11	# 8x11 font
169
170#This is how you would tell the kernel the A2410 oscillator frequencies:
171#The used frequencies are the defaults, and do not need option setting
172#options 	ULOWELL_OSC1=36000000
173#options 	ULOWELL_OSC2=66667000
174
175#This is how you specify the blitting speed, higher values may speed up blits
176#a littel bit.  If you raise this value too much some trash may appear.
177#the commented version is the default.
178#options 	RH_MEMCLK=61000000
179#this option enables the 64 bit sprite which does not work
180#for quite a few people.  E.g. The cursor sprite will turn to a block
181#when moved to the top of the screen in X.
182#options 	RH_64BIT_SPRITE
183#enables fast scroll code appears to now work on 040 systems.
184#options 	RETINA_SPEED_HACK
185#enables the Hardwarecursor which does not work on some systems.
186#options 	RH_HARDWARECURSOR
187
188grfrh0		at zbus0		# retina III
189
190grf2		at grfrh0
191
192ite2		at grf2			# terminal emulators for grfs
193
194msc0		at zbus0		# A2232 MSC multiport serial.
195mfc0		at zbus0		# MultiFaceCard I/O board
196mfcs0		at mfc0 unit 0		# MFC serial
197mfcs1		at mfc0 unit 1		# MFC serial
198#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
199#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
200#mfcs2		at mfc1 unit 0
201#mfcs3		at mfc1 unit 1
202#mfcp1		at mfc1 unit 0
203
204hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
205#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
206com*		at hyper? port ?	# Hypercom3/4 serial ports
207lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
208
209#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
210#options 	IOBZCLOCK=24000000	# if needed.
211
212iobl*		at zbus?		# zbus IOBlix
213com*		at iobl? port ?		# IOBlix serial ports
214lpt*		at iobl? port ?		# IOBlix parallel ports
215
216#Keyboard device. Optionally can attach a wskbd.
217#wskbd works together with a wsdisplay so enable them both if you will.
218#Don't enable wskbd if you use ite.
219
220#XXX in std.amiga: kbd0 at mainbus0
221#wskbd0		at kbd0 console ?
222
223#DraCo Mainboard devices (sans keyboard)
224
225drbbc0		at mainbus0		# DraCo battery backed clock
226drsupio0	at mainbus0		# DraCo superio chip
227com*		at drsupio? port ?	# DraCo serial
228lpt0		at drsupio? port ?	# DraCo parallel
229
230#Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
231
232repulse*	at zbus0		# ALiENDESiGN Repulse
233audio*		at repulse?
234
235#Ethernet cards:
236le*		at zbus0		# A2065, Ameristar, Ariadne
237ne*		at zbus0		# AriadneII, X-surf
238ed*		at zbus0		# Hydra, ASDG LanRover
239es*		at zbus0		# CEI A4066 EthernetPLUS
240qn*		at zbus0		# Quicknet
241
242bah*		at zbus0		# C=/Ameristar A2060 / 560
243
244drsc0		at mainbus0		# DraCo scsi
245scsibus*	at drsc0
246
247#each hard drive from low target to high
248#will configure to the next available sd unit number
249sd*	at scsibus? target ? lun ?	# scsi disks
250st*	at scsibus? target ? lun ?	# scsi tapes
251cd*	at scsibus? target ? lun ?	# scsi cds
252ch*	at scsibus? target ? lun ?	# scsi autochangers
253
254ss*	at scsibus? target ? lun ?	# scsi scanner
255uk*	at scsibus? target ? lun ?	# scsi unknown
256
257pseudo-device	loop			# loopback network interface
258pseudo-device	sl		1	# SLIP network interfaces
259pseudo-device	ppp		1	# PPP network interfaces
260pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
261pseudo-device	tun		1	# network tunnel line discipline
262#pseudo-device	gre		2	# generic L3 over IP tunnel
263#pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
264pseudo-device	bpfilter	16	# Berkeley packet filter
265pseudo-device	ipfilter		# IP Filter package
266pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
267#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
268#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
269pseudo-device	vlan			# IEEE 802.1q encapsulation
270pseudo-device	bridge			# simple inter-network bridging
271
272pseudo-device	view		4	# views (needed for grfcc)
273pseudo-device	pty			# pseudo-terminals
274
275pseudo-device	vnd		4	# vnode pseudo-disks
276pseudo-device	ccd		4	# concatenated disk devices
277#pseudo-device	raid		4	# RAIDframe disk driver
278#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
279
280pseudo-device	rnd			# /dev/random and in-kernel generator
281#options 	RND_COM			# use "com" randomness as well (BROKEN)
282
283config	netbsd root on ? type ?
284