GENERIC.in revision 1.136
1# $NetBSD: GENERIC.in,v 1.136 2017/09/14 07:58:39 mrg Exp $ 2# 3## 4# GENERIC machine description file 5# 6# This machine description file is used to generate the default NetBSD 7# kernel. The generic kernel does not include all options, subsystems 8# and device drivers, but should be useful for most applications. 9# 10# The machine description file can be customised for your specific 11# machine to reduce the kernel size and improve its performance. 12# 13# For further information on compiling NetBSD kernels, see the config(8) 14# man page. 15# 16# For further information on hardware support for this architecture, see 17# the intro(4) man page. For further information about kernel options 18# for this architecture, see the options(4) man page. For an explanation 19# of each device driver in this file see the section 4 man page for the 20# device. 21 22m4_divert(-1) 23# 24# GENERIC Amiga or DraCo 25# 26# This configuration file contains all possible options 27# 28# make AMIGA extracts the AMIGA configuration file. 29# make DRACO extracts the DRACO configuration file. 30# make GENERIC extracts the GENERIC configuration file. 31# make INSTALL extracts the INSTALL configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48 49m4_divert(0)m4_dnl 50 51include "arch/amiga/conf/std.amiga" 52 53options INCLUDE_CONFIG_FILE # embed config file in kernel binary 54 55#ident "GENERIC-$Revision: 1.136 $" 56 57m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 58makeoptions COPTS="-Os" 59',`m4_dnl 60makeoptions COPTS="-O2 -fno-reorder-blocks" # see share/mk/sys.mk 61')m4_dnl 62 63maxusers 8 64options RTC_OFFSET=0 65 66# 67# mainboards to support (in addition to Amiga) 68# 69m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 70options DRACO 71')m4_dnl 72m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 73options BB060STUPIDROM # You need this, if you have a non-DraCo 74 # MC68060 with an OS ROM up to (at least) 75 # V40 (OS3.1) and want to boot with the 76 # bootblock. 77 # You do not need this if you have a DraCo, 78 # have no 68060 or NEVER use the bootblock 79options P5PPC68KBOARD # Phase5 PPC/68K board support 80')m4_dnl 81# 82# processors this kernel should support 83# 84options M68060 # support for 060 85options M060SP # MC68060 software support (Required for 060) 86m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 87options M68040 # support for 040 88options FPSP # MC68040 floating point support 89options M68030 # support for 030 90options M68020 # support for 020/851 91options FPU_EMULATE # FPU emulation 92')m4_dnl 93 94# 95# Networking options 96# 97options INET # IP networking support (Required) 98options INET6 # IPV6 99#options IPSEC # IP security 100#options IPSEC_DEBUG # debug for IP security 101#options GATEWAY # Packet forwarding 102#options DIRECTED_BROADCAST # Broadcast across subnets 103 104m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 105#options MROUTING # Multicast routing 106#options PIM # Protocol Independent Multicast 107options NETATALK # AppleTalk networking protocols 108#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 109')m4_dnl 110 111options PPP_BSDCOMP # BSD-Compress compression support for PPP 112options PPP_DEFLATE # Deflate compression support for PPP 113options PPP_FILTER # Active filter support for PPP (requires bpf) 114options IPFILTER_LOG # ipmon(8) log support 115options IPFILTER_LOOKUP # ippool(8) support 116options IPFILTER_COMPAT # Compat for IP-Filter 117#options IPFILTER_DEFAULT_BLOCK # block all packets by default 118 119#options ALTQ # Manipulate network interfaces' output queues 120#options ALTQ_BLUE # Stochastic Fair Blue 121#options ALTQ_CBQ # Class-Based Queueing 122#options ALTQ_CDNR # Diffserv Traffic Conditioner 123#options ALTQ_FIFOQ # First-In First-Out Queue 124#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 125#options ALTQ_HFSC # Hierarchical Fair Service Curve 126#options ALTQ_LOCALQ # Local queueing discipline 127#options ALTQ_PRIQ # Priority Queueing 128#options ALTQ_RED # Random Early Detection 129#options ALTQ_RIO # RED with IN/OUT 130#options ALTQ_WFQ # Weighted Fair Queueing 131 132# Filesystems 133file-system FFS # Berkeley fast file system 134file-system EXT2FS # second extended file system (linux) 135#file-system LFS # log-structured filesystem (experimental) 136 137m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 138file-system MFS # Memory based filesystem 139')m4_dnl 140 141file-system NFS # Network File System client side code 142file-system ADOSFS # AmigaDOS file system 143file-system CD9660 # ISO 9660 + Rock Ridge filesystem 144file-system MSDOSFS # MS-DOS filesystem 145 146file-system KERNFS # kernel data-structure filesystem 147 148m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 149file-system FDESC # user file descriptor filesystem 150file-system NULLFS # loopback filesystem 151file-system OVERLAY # overlay filesystem 152file-system PROCFS # /proc filesystem 153file-system UMAPFS # NULLFS + uid and gid remapping 154file-system UNION # union filesystem 155file-system SMBFS # experimental - CIFS; also needs nsmb (below) 156file-system PTYFS # /dev/pts/N support 157file-system TMPFS # Efficient memory file-system 158#file-system UDF # experimental - OSTA UDF CD/DVD file-system 159')m4_dnl 160 161# Filesystem options 162 163#options FFS_EI # FFS Endian Independent support 164options WAPBL # File system journaling support 165 166m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 167options QUOTA # legacy UFS quotas 168options QUOTA2 # new, in-filesystem UFS quotas 169#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 170options NFSSERVER # Network File System server side code 171#options FFS_NO_SNAPSHOT # No FFS snapshot support 172options UFS_EXTATTR # Extended attribute support for UFS1 173')m4_dnl 174 175#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 176 # immutable) behave as system flags. 177 178# 179# Compatibility options for various existing systems 180# 181 182m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 183 184include "conf/compat_netbsd09.config" 185 186options COMPAT_SUNOS # Support to run Sun (m68k) executables 187#options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 188options COMPAT_NOMID # allow nonvalid machine id executables 189#options COMPAT_LINUX # Support to run Linux/m68k executables 190')m4_dnl 191 192options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 193options COMPAT_AOUT_M68K # actually make some system calls work. 194 195m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 196# 197# Support for System V IPC facilities. 198# 199options SYSVSHM # System V-like shared memory 200options SYSVMSG # System V-like messages 201options SYSVSEM # System V-like semaphores 202')m4_dnl 203 204# 205# Support for various kernel options 206# 207 208m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 209options KTRACE # system call tracing support 210')m4_dnl 211#options INSECURE # disable kernel security levels 212options SCSIVERBOSE # human readable SCSI error messages 213options USERCONF # userconf(4) support 214m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 215options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 216options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 217', `m4_dnl 218options NTP # NTP phase/frequency locked loop 219#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 220')m4_dnl 221 222# Enable experimental buffer queue strategy for better responsiveness under 223# high disk I/O load. Use it with caution - it's not proven to be stable yet. 224#options BUFQ_READPRIO 225#options BUFQ_PRIOCSCAN 226 227# 228# Misc. debugging options 229# 230options DDB # Kernel debugger 231#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 232#options DIAGNOSTIC # Extra kernel sanity checks 233#options DEBUG # Enable misc. kernel debugging code 234#options SYSCALL_DEBUG # debug all syscalls. 235#options SCSIDEBUG # Add SCSI debugging statements 236#options PANICBUTTON # Forced crash via keypress (?) 237 238# 239# Amiga specific options 240# 241#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 242 # first bank of RAM. (default: unlimited) 243 244# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 245# before the 10 secondinterval ends, or that KBDRESET does work at all. 246#options KBDRESET # sync on Ctrl-Amiga-Amiga 247 248# These options improve performance with the built-in serial port 249# on slower Amigas. Try the larger buffers first then lev6_defer. 250#options SERIBUF_SIZE=4096 251#options SEROBUF_SIZE=32 252#options LEV6_DEFER # defers l6 to l4 (below serial l5) 253 254m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 255#options DEVRELOAD # implement /dev/reload 256# # currently only works for a.out kernels 257')m4_dnl 258 259options RETINACONSOLE # enable code to allow retina to be console 260m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 261options ULOWELLCONSOLE # enable code to allow a2410 to be console 262options CL5426CONSOLE # Cirrus console 263options CV64CONSOLE # CyberVision console 264options TSENGCONSOLE # Tseng console 265options CV3DCONSOLE # CyberVision 64/3D console 266 267options GRF_ECS # Enhanced Chip Set 268options GRF_NTSC # NTSC 269options GRF_PAL # PAL 270options GRF_A2024 # Support for the A2024 271options GRF_AGA # AGA Chip Set 272options GRF_AGA_VGA # AGA VGAONLY timing 273options GRF_SUPER72 # AGA Super-72 274')m4_dnl 275#options KFONT_8X11 # 8x11 font 276 277# select a font for the console according to the character set and keymap 278# you want to use 279options KFONT_CONS_ISO8859_1 280#options KFONT_CONS_ISO8859_2 281 282# This is how you would tell the kernel the A2410 oscillator frequencies: 283# The used frequencies are the defaults, and do not need option setting 284#options ULOWELL_OSC1=36000000 285#options ULOWELL_OSC2=66667000 286 287# This is how you specify the blitting speed, higher values may speed up blits 288# a littel bit. If you raise this value too much some trash may appear. 289# the commented version is the default. 290#options RH_MEMCLK=61000000 291# this option enables the 64 bit sprite which does not work 292# for quite a few people. E.g. The cursor sprite will turn to a block 293# when moved to the top of the screen in X. 294#options RH_64BIT_SPRITE 295# enables fast scroll code appears to now work on 040 systems. 296#options RETINA_SPEED_HACK 297# enables the Hardwarecursor which does not work on some systems. 298#options RH_HARDWARECURSOR 299 300m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 301# wscons aware interface to amiga custom chips. 302# If you enable it enable also wskbd. 303# 304#amidisplaycc0 at mainbus0 # wscons interface to custom chips 305#wsdisplay0 at amidisplaycc0 console ? 306#options WSEMUL_VT100 307#options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 308#options FONT_VT220L8x10 309#options FONT_VT220ISO8x16 310')m4_dnl 311 312m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 313#z3rambd* at zbus0 # Zorro III RAM block devices 314#altmem* at z3rambd? 315 316p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus 317 318grfcc0 at mainbus0 # custom chips 319grfrt0 at zbus0 # retina II 320')m4_dnl 321grfrh0 at zbus0 # retina III 322m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 323grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 324grful0 at zbus0 # A2410 325grfcv0 at zbus0 # CyberVision 64 326grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 327grfcv3d0 at zbus0 # CyberVision 64/3D 328')m4_dnl 329 330m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 331grf0 at grfcc0 332grf1 at grfrt0 333')m4_dnl 334grf2 at grfrh0 335m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 336grf3 at grfcl? 337grf4 at grful0 338grf5 at grfcv0 339grf6 at grfet? 340grf7 at grfcv3d0 341ite0 at grf0 # terminal emulators for grfs 342ite1 at grf1 # terminal emulators for grfs 343')m4_dnl 344ite2 at grf2 # terminal emulators for grfs 345m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 346ite3 at grf3 # terminal emulators for grfs 347ite4 at grf4 # terminal emulators for grfs 348ite5 at grf5 # terminal emulators for grfs 349ite6 at grf6 # terminal emulators for grfs 350ite7 at grf7 # terminal emulators for grfs 351 352#wsdisplay* at grf5 console ? # wsdisplay on top of grf (CV64) 353#wsdisplay* at grf7 console ? # wsdisplay on top of grf (CV64/3D) 354')m4_dnl 355 356msc0 at zbus0 # A2232 MSC multiport serial. 357mfc0 at zbus0 # MultiFaceCard I/O board 358mfcs0 at mfc0 unit 0 # MFC serial 359mfcs1 at mfc0 unit 1 # MFC serial 360#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 361#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 362#mfcs2 at mfc1 unit 0 363#mfcs3 at mfc1 unit 1 364#mfcp1 at mfc1 unit 0 365 366hyper* at zbus? # zbus HyperCom3/3+/4/4+ 367#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 368com* at hyper? port ? # Hypercom3/4 serial ports 369lpt* at hyper? port ? # Hypercom3+/4+ parallel port 370 371#options IOBZCLOCK=22118400 # default, uncomment the next line 372#options IOBZCLOCK=24000000 # if needed. 373 374iobl* at zbus? # zbus IOBlix 375com* at iobl? port ? # IOBlix serial ports 376lpt* at iobl? port ? # IOBlix parallel ports 377 378 379# 380# Keyboard device. Optionally can attach a wskbd. 381# wskbd works together with a wsdisplay so enable them both if you will. 382# Don't enable wskbd if you use ite. 383# 384# XXX in std.amiga: kbd0 at mainbus0 385#wskbd0 at kbd0 console ? 386 387 388m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 389# 390# Amiga Mainboard devices (sans graphics and keyboard) 391# 392 393ser0 at mainbus0 # Amiga onboard serial 394par0 at mainbus0 # Amiga onboard parallel 395ms* at mainbus0 # Amiga mice 396fdc0 at mainbus0 # Amiga FDC 397fd* at fdc0 unit ? # floppy disks on the later 398a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 399a2kbbc0 at mainbus0 # A2000 battery backed clock 400m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 401aucc* at mainbus0 # Amiga CC audio 402audio* at aucc? 403 404spkr* at audio? # PC speaker (synthesized) 405 406a1k2cp0 at mainbus0 # A1200 on-board clockport 407clockport* at a1k2cp0 408 409#com* at clockport? # Individual Computers SilverSurfer 410')m4_dnl 411')m4_dnl 412 413#wsmouse* at ms? 414 415m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 416# 417# DraCo Mainboard devices (sans keyboard) 418# 419 420drbbc0 at mainbus0 # DraCo battery backed clock 421drsupio0 at mainbus0 # DraCo superio chip 422com* at drsupio? port ? # DraCo serial 423lpt0 at drsupio? port ? # DraCo parallel 424')m4_dnl 425 426# 427# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 428# 429 430m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 431m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 432# Alas, Melody-Z2 dont configure in the DraCo bus. 433melody* at zbus0 # Melody MPEG audio decoder 434audio* at melody? 435')m4_dnl 436 437repulse* at zbus0 # ALiENDESiGN Repulse 438audio* at repulse? 439 440toccata* at zbus0 # MacroSystem GmbH Toccata 441audio* at toccata? 442')m4_dnl 443 444# Ethernet cards: 445le* at zbus0 # A2065, Ameristar, Ariadne 446ne* at zbus0 # AriadneII 447ed* at zbus0 # Hydra, ASDG LanRover 448es* at zbus0 # CEI A4066 EthernetPLUS 449qn* at zbus0 # Quicknet 450 451m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 452xsh* at zbus0 # X-Surf 100 453ne* at xshbus? # NE2000 chip on X-Surf 100 454 455xsurf* at zbus0 # X-Surf 456ne* at xsurfbus? # NE2000 chip on X-Surf 457gencp* at xsurfbus? # clockports on X-Surf 458wdc* at xsurfbus? # IDE on X-Surf 459 460clockport* at gencp? 461')m4_dnl 462 463# Arcnet 464bah* at zbus0 # C=/Ameristar A2060 / 560 465 466m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 467# Greater Valley Product Bus 468gvpbus* at zbus0 469 470# scsi stuff, all possible 471gtsc0 at gvpbus? # GVP series II scsi 472scsibus* at gtsc0 473ahsc0 at mainbus0 # A3000 scsi 474scsibus* at ahsc0 475atzsc0 at zbus0 # A2091 scsi 476scsibus* at atzsc0 477wstsc0 at zbus0 # Wordsync II scsi 478scsibus* at wstsc0 479ivsc0 at zbus0 # IVS scsi 480scsibus* at ivsc0 481mlhsc0 at zbus0 # Hacker scsi 482scsibus* at mlhsc0 483otgsc0 at zbus0 # 12 gauge scsi 484scsibus* at otgsc0 485zssc0 at zbus0 # Zeus scsi 486scsibus* at zssc0 487mgnsc0 at zbus0 # Magnum scsi 488scsibus* at mgnsc0 489wesc0 at zbus0 # Warp Engine scsi 490scsibus* at wesc0 491bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi 492scsibus* at bppcsc0 493afsc0 at zbus0 # A4091 scsi 494scsibus* at afsc0 495aftsc0 at mainbus0 # A4000T scsi 496scsibus* at aftsc0 497flsc0 at zbus0 # FastlaneZ3 scsi 498scsibus* at flsc0 499bzsc0 at zbus0 # Blizzard 1230 I,II scsi 500scsibus* at bzsc0 501bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 502scsibus* at bzivsc0 503bztzsc0 at zbus0 # Blizzard 2060 scsi 504scsibus* at bztzsc0 505cbsc0 at zbus0 # CyberSCSI I 506scsibus* at cbsc0 507cbiisc0 at zbus0 # CyberSCSI II 508scsibus* at cbiisc0 509cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 510scsibus* at cbiiisc0 511empsc0 at zbus0 # Emplant scsi 512scsibus* at empsc0 513 514acafh0 at mainbus0 # Individual Computers ACA500 515wdc* at acafhbus? # CF slots on ACA500 516gencp* at acafhbus? # clockport on ACA500 517 518wdc0 at mainbus0 # A4000 & A1200 IDE bus 519wdc* at zbus0 # Buddha / Catweasel 520#efa0 at mainbus0 # ELBOX FastATA 1200 Mk-III/Mk-IV 521 522atabus* at wdc? channel ? # ATA bus 523#atabus* at efa? channel ? # ATA bus 524atabus* at ata? channel ? # ATA bus 525wd* at atabus? drive ? # + drives 526atapibus* at atabus? # ATAPI bus 527cd* at atapibus? drive ? # ATAPI CD-ROM drives 528sd* at atapibus? drive ? # ATAPI disk drives 529 530pccard0 at mainbus0 531pcmcia* at pccard0 532com* at pcmcia? function ? # Modems and serial cards 533pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 534aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 535wdc* at pcmcia? function ? 536awi* at pcmcia? function ? # BayStack 650 (802.11FH) 537ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 538mbe* at pcmcia? function ? # MB8696x based Ethernet 539ne* at pcmcia? function ? # NE2000-compatible Ethernet 540sm* at pcmcia? function ? # Megahertz Ethernet 541mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 542com* at mhzc? 543sm* at mhzc? 544 545nsphyter* at mii? phy ? # NS83843 PHYs 546ukphy* at mii? phy ? # generic unknown PHYs 547')m4_dnl 548 549m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 550drsc0 at mainbus0 # DraCo scsi 551scsibus* at drsc0 552')m4_dnl 553 554 555# each hard drive from low target to high 556# will configure to the next available sd unit number 557sd* at scsibus? target ? lun ? # scsi disks 558st* at scsibus? target ? lun ? # scsi tapes 559cd* at scsibus? target ? lun ? # scsi cds 560ch* at scsibus? target ? lun ? # scsi autochangers 561m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 562ss* at scsibus? target ? lun ? # scsi scanner 563uk* at scsibus? target ? lun ? # scsi unknown 564')m4_dnl 565m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 566 567# PCI bus support 568options PCIVERBOSE # verbose PCI device autoconfig messages 569#options PCI_CONFIG_DUMP 570options PCI_NETBSD_CONFIGURE # supported by mppb(4), p5pb(4), empb(4) 571 572p5pb0 at p5bus0 # Phase5 PCI bridge (CVPPC/BVPPC/G-REX) 573p5membar* at zbus0 # Phase5 PCI bridge autoconfiguring BARs 574#options P5PB_DEBUG # enable excessive debug for p5pb 575#options P5PB_CONSOLE # console on CVPPC/BVPPC/Voodoo3 576pci* at p5pb0 577 578mppb* at zbus0 # Matay Prometheus Zorro-PCI bridge 579pci* at mppb? 580 581empb0 at zbus0 # ELBOX Mediator PCI 1200 582em4k0 at zbus0 # ELBOX Mediator PCI 4000 583emmem0 at zbus0 # ELBOX Mediator PCI memory space 584empm0 at empb0 # ELBOX Mediator PCI Power Management 585pci* at empb0 586pci* at em4k0 587 588#cv3dpb* at zbus0 # CyberVision 64/3D PCI bridge 589 590#genfb* at pci? # generic fb, CVPPC/BVPPC only 591#voodoofb* at pci? # 3Dfx Voodoo 3 in G-REX 592#radeonfb* at pci? # untested 593 594ne* at pci? # NE2000 Ethernet 595satalink* at pci? dev ? function ? flags 0x0002 # SiI SATALink 3112 596 597# Bluetooth Controller and Device support 598# tested only with btuart on an A1200 599 600# Bluetooth PCMCIA Controllers 601bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A 602btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139 603 604# Bluetooth Device Hub 605bthub* at bcsp? 606bthub* at bt3c? 607bthub* at btbc? 608bthub* at btuart? 609 610# Bluetooth HID support 611bthidev* at bthub? 612 613# Bluetooth Mouse 614#btms* at bthidev? reportid ? 615#wsmouse* at btms? mux 0 616 617# Bluetooth Keyboard 618#btkbd* at bthidev? reportid ? 619#wskbd* at btkbd? console ? mux 1 620 621# Bluetooth Apple Magic Mouse 622#btmagic* at bthub? 623#wsmouse* at btmagic? mux 0 624 625# Bluetooth Audio support 626#btsco* at bthub? 627 628# USB 629slhci* at zbus? # Thylacine 630usb* at slhci? 631 632uhub* at usb? 633uhub* at uhub? port ? 634 635uhidev* at uhub? port ? configuration ? interface ? 636uhid* at uhidev? reportid ? 637 638')m4_dnl 639m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 640# 641# accept filters 642pseudo-device accf_data # "dataready" accept filter 643pseudo-device accf_http # "httpready" accept filter 644')m4_dnl 645 646pseudo-device loop # loopback network interface 647pseudo-device sl # SLIP network interfaces 648pseudo-device ppp # PPP network interfaces 649pseudo-device pppoe # PPP over Ethernet (RFC 2516) 650pseudo-device tun # network tunnel line discipline 651pseudo-device tap # virtual Ethernet 652#pseudo-device gre # generic L3 over IP tunnel 653pseudo-device bpfilter # Berkeley packet filter 654#pseudo-device carp # Common Address Redundancy Protocol 655pseudo-device ipfilter # IP Filter package 656pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 657#pseudo-device faith # IPv[46] tcp relay translation i/f 658pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 659pseudo-device vlan # IEEE 802.1q encapsulation 660pseudo-device bridge # simple inter-network bridging 661#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 662pseudo-device agr # IEEE 802.3ad link aggregation 663#pseudo-device pf # PF packet filter 664#pseudo-device pflog # PF log if 665m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 666#pseudo-device fss # file system snapshot device 667', `m4_dnl 668pseudo-device fss # file system snapshot device 669')m4_dnl 670m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 671#pseudo-device putter # for puffs and pud 672', `m4_dnl 673pseudo-device putter # for puffs and pud 674')m4_dnl 675 676pseudo-device view 4 # views (needed for grfcc) 677m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 678pseudo-device pty # pseudo-terminals 679', `m4_dnl 680pseudo-device pty # pseudo-terminals 681')m4_dnl 682pseudo-device clockctl # user control of clock subsystem 683 684#pseudo-device wsfont # wsfont(4) dynamic font loading support 685#pseudo-device wsmux # mouse & keyboard multiplexor 686 687pseudo-device vnd # vnode pseudo-disks 688#options VND_COMPRESSION # compressed vnd(4) 689pseudo-device ccd # concatenated disk devices 690#pseudo-device cgd # cryptographic disk devices 691pseudo-device raid # RAIDframe disk driver 692options RAID_AUTOCONFIG # auto-configuration of RAID components 693# Options to enable various other RAIDframe RAID types. 694# options RF_INCLUDE_EVENODD=1 695# options RF_INCLUDE_RAID5_RS=1 696# options RF_INCLUDE_PARITYLOGGING=1 697# options RF_INCLUDE_CHAINDECLUSTER=1 698# options RF_INCLUDE_INTERDECLUSTER=1 699# options RF_INCLUDE_PARITY_DECLUSTERING=1 700# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 701 702#options RND_COM # use "com" randomness as well (BROKEN) 703 704m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 705pseudo-device ksyms # /dev/ksyms (kernel symbols) 706pseudo-device nsmb # experimental - SMB requester 707')m4_dnl 708m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 709pseudo-device bcsp # BlueCore Serial Protocol 710pseudo-device btuart # Bluetooth HCI UART (H4) 711')m4_dnl 712 713# Veriexec 714# 715# a pseudo device needed for veriexec 716#pseudo-device veriexec 717# 718# Uncomment the fingerprint methods below that are desired. Note that 719# removing fingerprint methods will have almost no impact on the kernel 720# code size. 721# 722#options VERIFIED_EXEC_FP_SHA256 723#options VERIFIED_EXEC_FP_SHA384 724#options VERIFIED_EXEC_FP_SHA512 725 726config netbsd root on ? type ? 727