GENERIC.in revision 1.138
1# $NetBSD: GENERIC.in,v 1.138 2018/02/05 15:18:10 maxv Exp $ 2# 3## 4# GENERIC machine description file 5# 6# This machine description file is used to generate the default NetBSD 7# kernel. The generic kernel does not include all options, subsystems 8# and device drivers, but should be useful for most applications. 9# 10# The machine description file can be customised for your specific 11# machine to reduce the kernel size and improve its performance. 12# 13# For further information on compiling NetBSD kernels, see the config(8) 14# man page. 15# 16# For further information on hardware support for this architecture, see 17# the intro(4) man page. For further information about kernel options 18# for this architecture, see the options(4) man page. For an explanation 19# of each device driver in this file see the section 4 man page for the 20# device. 21 22m4_divert(-1) 23# 24# GENERIC Amiga or DraCo 25# 26# This configuration file contains all possible options 27# 28# make AMIGA extracts the AMIGA configuration file. 29# make DRACO extracts the DRACO configuration file. 30# make GENERIC extracts the GENERIC configuration file. 31# make INSTALL extracts the INSTALL configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48 49m4_divert(0)m4_dnl 50 51include "arch/amiga/conf/std.amiga" 52 53options INCLUDE_CONFIG_FILE # embed config file in kernel binary 54 55#ident "GENERIC-$Revision: 1.138 $" 56 57m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 58makeoptions COPTS="-Os" 59',`m4_dnl 60makeoptions COPTS="-O2 -fno-reorder-blocks" # see share/mk/sys.mk 61')m4_dnl 62 63maxusers 8 64options RTC_OFFSET=0 65 66# 67# mainboards to support (in addition to Amiga) 68# 69m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 70options DRACO 71')m4_dnl 72m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 73options BB060STUPIDROM # You need this, if you have a non-DraCo 74 # MC68060 with an OS ROM up to (at least) 75 # V40 (OS3.1) and want to boot with the 76 # bootblock. 77 # You do not need this if you have a DraCo, 78 # have no 68060 or NEVER use the bootblock 79options P5PPC68KBOARD # Phase5 PPC/68K board support 80')m4_dnl 81# 82# processors this kernel should support 83# 84options M68060 # support for 060 85options M060SP # MC68060 software support (Required for 060) 86m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 87options M68040 # support for 040 88options FPSP # MC68040 floating point support 89options M68030 # support for 030 90options M68020 # support for 020/851 91options FPU_EMULATE # FPU emulation 92')m4_dnl 93 94# 95# Networking options 96# 97options INET # IP networking support (Required) 98options INET6 # IPV6 99#options IPSEC # IP security 100#options IPSEC_DEBUG # debug for IP security 101#options GATEWAY # Packet forwarding 102 103m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 104#options MROUTING # Multicast routing 105#options PIM # Protocol Independent Multicast 106options NETATALK # AppleTalk networking protocols 107#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 108')m4_dnl 109 110options PPP_BSDCOMP # BSD-Compress compression support for PPP 111options PPP_DEFLATE # Deflate compression support for PPP 112options PPP_FILTER # Active filter support for PPP (requires bpf) 113options IPFILTER_LOG # ipmon(8) log support 114options IPFILTER_LOOKUP # ippool(8) support 115options IPFILTER_COMPAT # Compat for IP-Filter 116#options IPFILTER_DEFAULT_BLOCK # block all packets by default 117 118#options ALTQ # Manipulate network interfaces' output queues 119#options ALTQ_BLUE # Stochastic Fair Blue 120#options ALTQ_CBQ # Class-Based Queueing 121#options ALTQ_CDNR # Diffserv Traffic Conditioner 122#options ALTQ_FIFOQ # First-In First-Out Queue 123#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 124#options ALTQ_HFSC # Hierarchical Fair Service Curve 125#options ALTQ_LOCALQ # Local queueing discipline 126#options ALTQ_PRIQ # Priority Queueing 127#options ALTQ_RED # Random Early Detection 128#options ALTQ_RIO # RED with IN/OUT 129#options ALTQ_WFQ # Weighted Fair Queueing 130 131# Filesystems 132file-system FFS # Berkeley fast file system 133file-system EXT2FS # second extended file system (linux) 134#file-system LFS # log-structured filesystem (experimental) 135 136m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 137file-system MFS # Memory based filesystem 138')m4_dnl 139 140file-system NFS # Network File System client side code 141file-system ADOSFS # AmigaDOS file system 142file-system CD9660 # ISO 9660 + Rock Ridge filesystem 143file-system MSDOSFS # MS-DOS filesystem 144 145file-system KERNFS # kernel data-structure filesystem 146 147m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 148file-system FDESC # user file descriptor filesystem 149file-system NULLFS # loopback filesystem 150file-system OVERLAY # overlay filesystem 151file-system PROCFS # /proc filesystem 152file-system UMAPFS # NULLFS + uid and gid remapping 153file-system UNION # union filesystem 154file-system SMBFS # experimental - CIFS; also needs nsmb (below) 155file-system PTYFS # /dev/pts/N support 156file-system TMPFS # Efficient memory file-system 157#file-system UDF # experimental - OSTA UDF CD/DVD file-system 158')m4_dnl 159 160# Filesystem options 161 162#options FFS_EI # FFS Endian Independent support 163options WAPBL # File system journaling support 164 165m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 166options QUOTA # legacy UFS quotas 167options QUOTA2 # new, in-filesystem UFS quotas 168#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 169options NFSSERVER # Network File System server side code 170#options FFS_NO_SNAPSHOT # No FFS snapshot support 171options UFS_EXTATTR # Extended attribute support for UFS1 172')m4_dnl 173 174#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 175 # immutable) behave as system flags. 176 177# 178# Compatibility options for various existing systems 179# 180 181m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 182 183include "conf/compat_netbsd09.config" 184 185options COMPAT_SUNOS # Support to run Sun (m68k) executables 186#options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 187options COMPAT_NOMID # allow nonvalid machine id executables 188#options COMPAT_LINUX # Support to run Linux/m68k executables 189')m4_dnl 190 191options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 192options COMPAT_AOUT_M68K # actually make some system calls work. 193 194m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 195# 196# Support for System V IPC facilities. 197# 198options SYSVSHM # System V-like shared memory 199options SYSVMSG # System V-like messages 200options SYSVSEM # System V-like semaphores 201')m4_dnl 202 203# 204# Support for various kernel options 205# 206 207m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 208options KTRACE # system call tracing support 209')m4_dnl 210#options INSECURE # disable kernel security levels 211options SCSIVERBOSE # human readable SCSI error messages 212options USERCONF # userconf(4) support 213m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 214options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 215options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 216', `m4_dnl 217options NTP # NTP phase/frequency locked loop 218#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 219')m4_dnl 220 221# Alternate buffer queue strategies for better responsiveness under high 222# disk I/O load. 223#options BUFQ_READPRIO 224#options BUFQ_PRIOCSCAN 225 226# 227# Misc. debugging options 228# 229options DDB # Kernel debugger 230#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 231#options DIAGNOSTIC # Extra kernel sanity checks 232#options DEBUG # Enable misc. kernel debugging code 233#options SYSCALL_DEBUG # debug all syscalls. 234#options SCSIDEBUG # Add SCSI debugging statements 235#options PANICBUTTON # Forced crash via keypress (?) 236 237# 238# Amiga specific options 239# 240#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 241 # first bank of RAM. (default: unlimited) 242 243# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 244# before the 10 secondinterval ends, or that KBDRESET does work at all. 245#options KBDRESET # sync on Ctrl-Amiga-Amiga 246 247# These options improve performance with the built-in serial port 248# on slower Amigas. Try the larger buffers first then lev6_defer. 249#options SERIBUF_SIZE=4096 250#options SEROBUF_SIZE=32 251#options LEV6_DEFER # defers l6 to l4 (below serial l5) 252 253m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 254#options DEVRELOAD # implement /dev/reload 255# # currently only works for a.out kernels 256')m4_dnl 257 258options RETINACONSOLE # enable code to allow retina to be console 259m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 260options ULOWELLCONSOLE # enable code to allow a2410 to be console 261options CL5426CONSOLE # Cirrus console 262options CV64CONSOLE # CyberVision console 263options TSENGCONSOLE # Tseng console 264options CV3DCONSOLE # CyberVision 64/3D console 265 266options GRF_ECS # Enhanced Chip Set 267options GRF_NTSC # NTSC 268options GRF_PAL # PAL 269options GRF_A2024 # Support for the A2024 270options GRF_AGA # AGA Chip Set 271options GRF_AGA_VGA # AGA VGAONLY timing 272options GRF_SUPER72 # AGA Super-72 273')m4_dnl 274#options KFONT_8X11 # 8x11 font 275 276# select a font for the console according to the character set and keymap 277# you want to use 278options KFONT_CONS_ISO8859_1 279#options KFONT_CONS_ISO8859_2 280 281# This is how you would tell the kernel the A2410 oscillator frequencies: 282# The used frequencies are the defaults, and do not need option setting 283#options ULOWELL_OSC1=36000000 284#options ULOWELL_OSC2=66667000 285 286# This is how you specify the blitting speed, higher values may speed up blits 287# a littel bit. If you raise this value too much some trash may appear. 288# the commented version is the default. 289#options RH_MEMCLK=61000000 290# this option enables the 64 bit sprite which does not work 291# for quite a few people. E.g. The cursor sprite will turn to a block 292# when moved to the top of the screen in X. 293#options RH_64BIT_SPRITE 294# enables fast scroll code appears to now work on 040 systems. 295#options RETINA_SPEED_HACK 296# enables the Hardwarecursor which does not work on some systems. 297#options RH_HARDWARECURSOR 298 299m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 300# wscons aware interface to amiga custom chips. 301# If you enable it enable also wskbd. 302# 303#amidisplaycc0 at mainbus0 # wscons interface to custom chips 304#wsdisplay0 at amidisplaycc0 console ? 305#options WSEMUL_VT100 306#options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 307#options FONT_VT220L8x10 308#options FONT_VT220ISO8x16 309')m4_dnl 310 311m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 312#z3rambd* at zbus0 # Zorro III RAM block devices 313#altmem* at z3rambd? 314 315p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus 316 317grfcc0 at mainbus0 # custom chips 318grfrt0 at zbus0 # retina II 319')m4_dnl 320grfrh0 at zbus0 # retina III 321m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 322grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 323grful0 at zbus0 # A2410 324grfcv0 at zbus0 # CyberVision 64 325grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 326grfcv3d0 at zbus0 # CyberVision 64/3D 327')m4_dnl 328 329m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 330grf0 at grfcc0 331grf1 at grfrt0 332')m4_dnl 333grf2 at grfrh0 334m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 335grf3 at grfcl? 336grf4 at grful0 337grf5 at grfcv0 338grf6 at grfet? 339grf7 at grfcv3d0 340ite0 at grf0 # terminal emulators for grfs 341ite1 at grf1 # terminal emulators for grfs 342')m4_dnl 343ite2 at grf2 # terminal emulators for grfs 344m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 345ite3 at grf3 # terminal emulators for grfs 346ite4 at grf4 # terminal emulators for grfs 347ite5 at grf5 # terminal emulators for grfs 348ite6 at grf6 # terminal emulators for grfs 349ite7 at grf7 # terminal emulators for grfs 350 351#wsdisplay* at grf5 console ? # wsdisplay on top of grf (CV64) 352#wsdisplay* at grf7 console ? # wsdisplay on top of grf (CV64/3D) 353')m4_dnl 354 355msc0 at zbus0 # A2232 MSC multiport serial. 356mfc0 at zbus0 # MultiFaceCard I/O board 357mfcs0 at mfc0 unit 0 # MFC serial 358mfcs1 at mfc0 unit 1 # MFC serial 359#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 360#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 361#mfcs2 at mfc1 unit 0 362#mfcs3 at mfc1 unit 1 363#mfcp1 at mfc1 unit 0 364 365hyper* at zbus? # zbus HyperCom3/3+/4/4+ 366#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 367com* at hyper? port ? # Hypercom3/4 serial ports 368lpt* at hyper? port ? # Hypercom3+/4+ parallel port 369 370#options IOBZCLOCK=22118400 # default, uncomment the next line 371#options IOBZCLOCK=24000000 # if needed. 372 373iobl* at zbus? # zbus IOBlix 374com* at iobl? port ? # IOBlix serial ports 375lpt* at iobl? port ? # IOBlix parallel ports 376 377 378# 379# Keyboard device. Optionally can attach a wskbd. 380# wskbd works together with a wsdisplay so enable them both if you will. 381# Don't enable wskbd if you use ite. 382# 383# XXX in std.amiga: kbd0 at mainbus0 384#wskbd0 at kbd0 console ? 385 386 387m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 388# 389# Amiga Mainboard devices (sans graphics and keyboard) 390# 391 392ser0 at mainbus0 # Amiga onboard serial 393par0 at mainbus0 # Amiga onboard parallel 394ms* at mainbus0 # Amiga mice 395fdc0 at mainbus0 # Amiga FDC 396fd* at fdc0 unit ? # floppy disks on the later 397a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 398a2kbbc0 at mainbus0 # A2000 battery backed clock 399m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 400aucc* at mainbus0 # Amiga CC audio 401audio* at aucc? 402 403spkr* at audio? # PC speaker (synthesized) 404 405a1k2cp0 at mainbus0 # A1200 on-board clockport 406clockport* at a1k2cp0 407 408#com* at clockport? # Individual Computers SilverSurfer 409')m4_dnl 410')m4_dnl 411 412#wsmouse* at ms? 413 414m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 415# 416# DraCo Mainboard devices (sans keyboard) 417# 418 419drbbc0 at mainbus0 # DraCo battery backed clock 420drsupio0 at mainbus0 # DraCo superio chip 421com* at drsupio? port ? # DraCo serial 422lpt0 at drsupio? port ? # DraCo parallel 423')m4_dnl 424 425# 426# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 427# 428 429m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 430m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 431# Alas, Melody-Z2 dont configure in the DraCo bus. 432melody* at zbus0 # Melody MPEG audio decoder 433audio* at melody? 434')m4_dnl 435 436repulse* at zbus0 # ALiENDESiGN Repulse 437audio* at repulse? 438 439toccata* at zbus0 # MacroSystem GmbH Toccata 440audio* at toccata? 441')m4_dnl 442 443# Ethernet cards: 444le* at zbus0 # A2065, Ameristar, Ariadne 445ne* at zbus0 # AriadneII 446ed* at zbus0 # Hydra, ASDG LanRover 447es* at zbus0 # CEI A4066 EthernetPLUS 448qn* at zbus0 # Quicknet 449 450m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 451xsh* at zbus0 # X-Surf 100 452ne* at xshbus? # NE2000 chip on X-Surf 100 453 454xsurf* at zbus0 # X-Surf 455ne* at xsurfbus? # NE2000 chip on X-Surf 456gencp* at xsurfbus? # clockports on X-Surf 457wdc* at xsurfbus? # IDE on X-Surf 458 459clockport* at gencp? 460')m4_dnl 461 462# Arcnet 463bah* at zbus0 # C=/Ameristar A2060 / 560 464 465m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 466# Greater Valley Product Bus 467gvpbus* at zbus0 468 469# scsi stuff, all possible 470gtsc0 at gvpbus? # GVP series II scsi 471scsibus* at gtsc0 472ahsc0 at mainbus0 # A3000 scsi 473scsibus* at ahsc0 474atzsc0 at zbus0 # A2091 scsi 475scsibus* at atzsc0 476wstsc0 at zbus0 # Wordsync II scsi 477scsibus* at wstsc0 478ivsc0 at zbus0 # IVS scsi 479scsibus* at ivsc0 480mlhsc0 at zbus0 # Hacker scsi 481scsibus* at mlhsc0 482otgsc0 at zbus0 # 12 gauge scsi 483scsibus* at otgsc0 484zssc0 at zbus0 # Zeus scsi 485scsibus* at zssc0 486mgnsc0 at zbus0 # Magnum scsi 487scsibus* at mgnsc0 488wesc0 at zbus0 # Warp Engine scsi 489scsibus* at wesc0 490bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi 491scsibus* at bppcsc0 492afsc0 at zbus0 # A4091 scsi 493scsibus* at afsc0 494aftsc0 at mainbus0 # A4000T scsi 495scsibus* at aftsc0 496flsc0 at zbus0 # FastlaneZ3 scsi 497scsibus* at flsc0 498bzsc0 at zbus0 # Blizzard 1230 I,II scsi 499scsibus* at bzsc0 500bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 501scsibus* at bzivsc0 502bztzsc0 at zbus0 # Blizzard 2060 scsi 503scsibus* at bztzsc0 504cbsc0 at zbus0 # CyberSCSI I 505scsibus* at cbsc0 506cbiisc0 at zbus0 # CyberSCSI II 507scsibus* at cbiisc0 508cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 509scsibus* at cbiiisc0 510empsc0 at zbus0 # Emplant scsi 511scsibus* at empsc0 512 513acafh0 at mainbus0 # Individual Computers ACA500 514wdc* at acafhbus? # CF slots on ACA500 515gencp* at acafhbus? # clockport on ACA500 516 517wdc0 at mainbus0 # A4000 & A1200 IDE bus 518wdc* at zbus0 # Buddha / Catweasel 519#efa0 at mainbus0 # ELBOX FastATA 1200 Mk-III/Mk-IV 520 521atabus* at wdc? channel ? # ATA bus 522#atabus* at efa? channel ? # ATA bus 523atabus* at ata? channel ? # ATA bus 524wd* at atabus? drive ? # + drives 525atapibus* at atabus? # ATAPI bus 526cd* at atapibus? drive ? # ATAPI CD-ROM drives 527sd* at atapibus? drive ? # ATAPI disk drives 528 529pccard0 at mainbus0 530pcmcia* at pccard0 531com* at pcmcia? function ? # Modems and serial cards 532pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 533aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 534wdc* at pcmcia? function ? 535awi* at pcmcia? function ? # BayStack 650 (802.11FH) 536ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 537mbe* at pcmcia? function ? # MB8696x based Ethernet 538ne* at pcmcia? function ? # NE2000-compatible Ethernet 539sm* at pcmcia? function ? # Megahertz Ethernet 540mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 541com* at mhzc? 542sm* at mhzc? 543 544nsphyter* at mii? phy ? # NS83843 PHYs 545ukphy* at mii? phy ? # generic unknown PHYs 546')m4_dnl 547 548m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 549drsc0 at mainbus0 # DraCo scsi 550scsibus* at drsc0 551')m4_dnl 552 553 554# each hard drive from low target to high 555# will configure to the next available sd unit number 556sd* at scsibus? target ? lun ? # scsi disks 557st* at scsibus? target ? lun ? # scsi tapes 558cd* at scsibus? target ? lun ? # scsi cds 559ch* at scsibus? target ? lun ? # scsi autochangers 560m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 561ss* at scsibus? target ? lun ? # scsi scanner 562uk* at scsibus? target ? lun ? # scsi unknown 563')m4_dnl 564m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 565 566# PCI bus support 567options PCIVERBOSE # verbose PCI device autoconfig messages 568#options PCI_CONFIG_DUMP 569options PCI_NETBSD_CONFIGURE # supported by mppb(4), p5pb(4), empb(4) 570 571p5pb0 at p5bus0 # Phase5 PCI bridge (CVPPC/BVPPC/G-REX) 572p5membar* at zbus0 # Phase5 PCI bridge autoconfiguring BARs 573#options P5PB_DEBUG # enable excessive debug for p5pb 574#options P5PB_CONSOLE # console on CVPPC/BVPPC/Voodoo3 575pci* at p5pb0 576 577mppb* at zbus0 # Matay Prometheus Zorro-PCI bridge 578pci* at mppb? 579 580empb0 at zbus0 # ELBOX Mediator PCI 1200 581em4k0 at zbus0 # ELBOX Mediator PCI 4000 582emmem0 at zbus0 # ELBOX Mediator PCI memory space 583empm0 at empb0 # ELBOX Mediator PCI Power Management 584pci* at empb0 585pci* at em4k0 586 587#cv3dpb* at zbus0 # CyberVision 64/3D PCI bridge 588 589#genfb* at pci? # generic fb, CVPPC/BVPPC only 590#voodoofb* at pci? # 3Dfx Voodoo 3 in G-REX 591#radeonfb* at pci? # untested 592 593ne* at pci? # NE2000 Ethernet 594satalink* at pci? dev ? function ? flags 0x0002 # SiI SATALink 3112 595 596# Bluetooth Controller and Device support 597# tested only with btuart on an A1200 598 599# Bluetooth PCMCIA Controllers 600bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A 601btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139 602 603# Bluetooth Device Hub 604bthub* at bcsp? 605bthub* at bt3c? 606bthub* at btbc? 607bthub* at btuart? 608 609# Bluetooth HID support 610bthidev* at bthub? 611 612# Bluetooth Mouse 613#btms* at bthidev? reportid ? 614#wsmouse* at btms? mux 0 615 616# Bluetooth Keyboard 617#btkbd* at bthidev? reportid ? 618#wskbd* at btkbd? console ? mux 1 619 620# Bluetooth Apple Magic Mouse 621#btmagic* at bthub? 622#wsmouse* at btmagic? mux 0 623 624# Bluetooth Audio support 625#btsco* at bthub? 626 627# USB 628slhci* at zbus? # Thylacine 629usb* at slhci? 630 631uhub* at usb? 632uhub* at uhub? port ? 633 634uhidev* at uhub? port ? configuration ? interface ? 635uhid* at uhidev? reportid ? 636 637')m4_dnl 638m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 639# 640# accept filters 641pseudo-device accf_data # "dataready" accept filter 642pseudo-device accf_http # "httpready" accept filter 643')m4_dnl 644 645pseudo-device loop # loopback network interface 646pseudo-device sl # SLIP network interfaces 647pseudo-device ppp # PPP network interfaces 648pseudo-device pppoe # PPP over Ethernet (RFC 2516) 649pseudo-device tun # network tunnel line discipline 650pseudo-device tap # virtual Ethernet 651#pseudo-device gre # generic L3 over IP tunnel 652pseudo-device bpfilter # Berkeley packet filter 653#pseudo-device carp # Common Address Redundancy Protocol 654pseudo-device ipfilter # IP Filter package 655pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 656#pseudo-device faith # IPv[46] tcp relay translation i/f 657pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 658pseudo-device vlan # IEEE 802.1q encapsulation 659pseudo-device bridge # simple inter-network bridging 660#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 661pseudo-device agr # IEEE 802.3ad link aggregation 662#pseudo-device pf # PF packet filter 663#pseudo-device pflog # PF log if 664m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 665#pseudo-device fss # file system snapshot device 666', `m4_dnl 667pseudo-device fss # file system snapshot device 668')m4_dnl 669m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 670#pseudo-device putter # for puffs and pud 671', `m4_dnl 672pseudo-device putter # for puffs and pud 673')m4_dnl 674 675pseudo-device view 4 # views (needed for grfcc) 676m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 677pseudo-device pty # pseudo-terminals 678', `m4_dnl 679pseudo-device pty # pseudo-terminals 680')m4_dnl 681pseudo-device clockctl # user control of clock subsystem 682 683#pseudo-device wsfont # wsfont(4) dynamic font loading support 684#pseudo-device wsmux # mouse & keyboard multiplexor 685 686pseudo-device vnd # vnode pseudo-disks 687#options VND_COMPRESSION # compressed vnd(4) 688pseudo-device ccd # concatenated disk devices 689#pseudo-device cgd # cryptographic disk devices 690pseudo-device raid # RAIDframe disk driver 691options RAID_AUTOCONFIG # auto-configuration of RAID components 692# Options to enable various other RAIDframe RAID types. 693# options RF_INCLUDE_EVENODD=1 694# options RF_INCLUDE_RAID5_RS=1 695# options RF_INCLUDE_PARITYLOGGING=1 696# options RF_INCLUDE_CHAINDECLUSTER=1 697# options RF_INCLUDE_INTERDECLUSTER=1 698# options RF_INCLUDE_PARITY_DECLUSTERING=1 699# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 700 701#options RND_COM # use "com" randomness as well (BROKEN) 702 703m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 704pseudo-device ksyms # /dev/ksyms (kernel symbols) 705pseudo-device nsmb # experimental - SMB requester 706')m4_dnl 707m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 708pseudo-device bcsp # BlueCore Serial Protocol 709pseudo-device btuart # Bluetooth HCI UART (H4) 710')m4_dnl 711 712# Veriexec 713# 714# a pseudo device needed for veriexec 715#pseudo-device veriexec 716# 717# Uncomment the fingerprint methods below that are desired. Note that 718# removing fingerprint methods will have almost no impact on the kernel 719# code size. 720# 721#options VERIFIED_EXEC_FP_SHA256 722#options VERIFIED_EXEC_FP_SHA384 723#options VERIFIED_EXEC_FP_SHA512 724 725config netbsd root on ? type ? 726