GENERIC.in revision 1.140
1# $NetBSD: GENERIC.in,v 1.140 2018/12/19 13:57:45 maxv Exp $ 2# 3## 4# GENERIC machine description file 5# 6# This machine description file is used to generate the default NetBSD 7# kernel. The generic kernel does not include all options, subsystems 8# and device drivers, but should be useful for most applications. 9# 10# The machine description file can be customised for your specific 11# machine to reduce the kernel size and improve its performance. 12# 13# For further information on compiling NetBSD kernels, see the config(8) 14# man page. 15# 16# For further information on hardware support for this architecture, see 17# the intro(4) man page. For further information about kernel options 18# for this architecture, see the options(4) man page. For an explanation 19# of each device driver in this file see the section 4 man page for the 20# device. 21 22m4_divert(-1) 23# 24# GENERIC Amiga or DraCo 25# 26# This configuration file contains all possible options 27# 28# make AMIGA extracts the AMIGA configuration file. 29# make DRACO extracts the DRACO configuration file. 30# make GENERIC extracts the GENERIC configuration file. 31# make INSTALL extracts the INSTALL configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48 49m4_divert(0)m4_dnl 50 51include "arch/amiga/conf/std.amiga" 52 53options INCLUDE_CONFIG_FILE # embed config file in kernel binary 54 55#ident "GENERIC-$Revision: 1.140 $" 56 57m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 58makeoptions COPTS="-Os" 59',`m4_dnl 60makeoptions COPTS="-O2 -fno-reorder-blocks" # see share/mk/sys.mk 61')m4_dnl 62 63maxusers 8 64options RTC_OFFSET=0 65 66# 67# mainboards to support (in addition to Amiga) 68# 69m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 70options DRACO 71')m4_dnl 72m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 73options BB060STUPIDROM # You need this, if you have a non-DraCo 74 # MC68060 with an OS ROM up to (at least) 75 # V40 (OS3.1) and want to boot with the 76 # bootblock. 77 # You do not need this if you have a DraCo, 78 # have no 68060 or NEVER use the bootblock 79options P5PPC68KBOARD # Phase5 PPC/68K board support 80')m4_dnl 81# 82# processors this kernel should support 83# 84options M68060 # support for 060 85options M060SP # MC68060 software support (Required for 060) 86m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 87options M68040 # support for 040 88options FPSP # MC68040 floating point support 89options M68030 # support for 030 90options M68020 # support for 020/851 91options FPU_EMULATE # FPU emulation 92')m4_dnl 93 94# 95# Networking options 96# 97options INET # IP networking support (Required) 98options INET6 # IPV6 99#options IPSEC # IP security 100#options IPSEC_DEBUG # debug for IP security 101#options GATEWAY # Packet forwarding 102 103m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 104#options MROUTING # Multicast routing 105#options PIM # Protocol Independent Multicast 106options NETATALK # AppleTalk networking protocols 107#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 108')m4_dnl 109 110options PPP_BSDCOMP # BSD-Compress compression support for PPP 111options PPP_DEFLATE # Deflate compression support for PPP 112options PPP_FILTER # Active filter support for PPP (requires bpf) 113 114#options ALTQ # Manipulate network interfaces' output queues 115#options ALTQ_BLUE # Stochastic Fair Blue 116#options ALTQ_CBQ # Class-Based Queueing 117#options ALTQ_CDNR # Diffserv Traffic Conditioner 118#options ALTQ_FIFOQ # First-In First-Out Queue 119#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 120#options ALTQ_HFSC # Hierarchical Fair Service Curve 121#options ALTQ_LOCALQ # Local queueing discipline 122#options ALTQ_PRIQ # Priority Queueing 123#options ALTQ_RED # Random Early Detection 124#options ALTQ_RIO # RED with IN/OUT 125#options ALTQ_WFQ # Weighted Fair Queueing 126 127# Filesystems 128file-system FFS # Berkeley fast file system 129file-system EXT2FS # second extended file system (linux) 130#file-system LFS # log-structured filesystem (experimental) 131 132m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 133file-system MFS # Memory based filesystem 134')m4_dnl 135 136file-system NFS # Network File System client side code 137file-system ADOSFS # AmigaDOS file system 138file-system CD9660 # ISO 9660 + Rock Ridge filesystem 139file-system MSDOSFS # MS-DOS filesystem 140 141file-system KERNFS # kernel data-structure filesystem 142 143m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 144file-system FDESC # user file descriptor filesystem 145file-system NULLFS # loopback filesystem 146file-system OVERLAY # overlay filesystem 147file-system PROCFS # /proc filesystem 148file-system UMAPFS # NULLFS + uid and gid remapping 149file-system UNION # union filesystem 150file-system SMBFS # experimental - CIFS; also needs nsmb (below) 151file-system PTYFS # /dev/pts/N support 152file-system TMPFS # Efficient memory file-system 153#file-system UDF # experimental - OSTA UDF CD/DVD file-system 154')m4_dnl 155 156# Filesystem options 157 158#options FFS_EI # FFS Endian Independent support 159options WAPBL # File system journaling support 160 161m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 162options QUOTA # legacy UFS quotas 163options QUOTA2 # new, in-filesystem UFS quotas 164#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 165options NFSSERVER # Network File System server side code 166#options FFS_NO_SNAPSHOT # No FFS snapshot support 167options UFS_EXTATTR # Extended attribute support for UFS1 168')m4_dnl 169 170#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 171 # immutable) behave as system flags. 172 173# 174# Compatibility options for various existing systems 175# 176 177m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 178 179include "conf/compat_netbsd09.config" 180 181options COMPAT_SUNOS # Support to run Sun (m68k) executables 182options COMPAT_NOMID # allow nonvalid machine id executables 183#options COMPAT_LINUX # Support to run Linux/m68k executables 184')m4_dnl 185 186options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 187options COMPAT_AOUT_M68K # actually make some system calls work. 188 189m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 190# 191# Support for System V IPC facilities. 192# 193options SYSVSHM # System V-like shared memory 194options SYSVMSG # System V-like messages 195options SYSVSEM # System V-like semaphores 196')m4_dnl 197 198# 199# Support for various kernel options 200# 201 202m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 203options KTRACE # system call tracing support 204')m4_dnl 205#options INSECURE # disable kernel security levels 206options SCSIVERBOSE # human readable SCSI error messages 207options USERCONF # userconf(4) support 208m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 209options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 210options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 211', `m4_dnl 212options NTP # NTP phase/frequency locked loop 213#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 214')m4_dnl 215 216# Alternate buffer queue strategies for better responsiveness under high 217# disk I/O load. 218#options BUFQ_READPRIO 219#options BUFQ_PRIOCSCAN 220 221# 222# Misc. debugging options 223# 224options DDB # Kernel debugger 225#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 226#options DIAGNOSTIC # Extra kernel sanity checks 227#options DEBUG # Enable misc. kernel debugging code 228#options SYSCALL_DEBUG # debug all syscalls. 229#options SCSIDEBUG # Add SCSI debugging statements 230#options PANICBUTTON # Forced crash via keypress (?) 231 232# 233# Amiga specific options 234# 235#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 236 # first bank of RAM. (default: unlimited) 237 238# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 239# before the 10 secondinterval ends, or that KBDRESET does work at all. 240#options KBDRESET # sync on Ctrl-Amiga-Amiga 241 242# These options improve performance with the built-in serial port 243# on slower Amigas. Try the larger buffers first then lev6_defer. 244#options SERIBUF_SIZE=4096 245#options SEROBUF_SIZE=32 246#options LEV6_DEFER # defers l6 to l4 (below serial l5) 247 248m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 249#options DEVRELOAD # implement /dev/reload 250# # currently only works for a.out kernels 251')m4_dnl 252 253options RETINACONSOLE # enable code to allow retina to be console 254m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 255options ULOWELLCONSOLE # enable code to allow a2410 to be console 256options CL5426CONSOLE # Cirrus console 257options CV64CONSOLE # CyberVision console 258options TSENGCONSOLE # Tseng console 259options CV3DCONSOLE # CyberVision 64/3D console 260 261options GRF_ECS # Enhanced Chip Set 262options GRF_NTSC # NTSC 263options GRF_PAL # PAL 264options GRF_A2024 # Support for the A2024 265options GRF_AGA # AGA Chip Set 266options GRF_AGA_VGA # AGA VGAONLY timing 267options GRF_SUPER72 # AGA Super-72 268')m4_dnl 269#options KFONT_8X11 # 8x11 font 270 271# select a font for the console according to the character set and keymap 272# you want to use 273options KFONT_CONS_ISO8859_1 274#options KFONT_CONS_ISO8859_2 275 276# This is how you would tell the kernel the A2410 oscillator frequencies: 277# The used frequencies are the defaults, and do not need option setting 278#options ULOWELL_OSC1=36000000 279#options ULOWELL_OSC2=66667000 280 281# This is how you specify the blitting speed, higher values may speed up blits 282# a littel bit. If you raise this value too much some trash may appear. 283# the commented version is the default. 284#options RH_MEMCLK=61000000 285# this option enables the 64 bit sprite which does not work 286# for quite a few people. E.g. The cursor sprite will turn to a block 287# when moved to the top of the screen in X. 288#options RH_64BIT_SPRITE 289# enables fast scroll code appears to now work on 040 systems. 290#options RETINA_SPEED_HACK 291# enables the Hardwarecursor which does not work on some systems. 292#options RH_HARDWARECURSOR 293 294m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 295# wscons aware interface to amiga custom chips. 296# If you enable it enable also wskbd. 297# 298#amidisplaycc0 at mainbus0 # wscons interface to custom chips 299#wsdisplay0 at amidisplaycc0 console ? 300#options WSEMUL_VT100 301#options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 302#options FONT_VT220L8x10 303#options FONT_VT220ISO8x16 304')m4_dnl 305 306m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 307#z3rambd* at zbus0 # Zorro III RAM block devices 308#altmem* at z3rambd? 309 310p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus 311 312grfcc0 at mainbus0 # custom chips 313grfrt0 at zbus0 # retina II 314')m4_dnl 315grfrh0 at zbus0 # retina III 316m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 317grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 318grful0 at zbus0 # A2410 319grfcv0 at zbus0 # CyberVision 64 320grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 321grfcv3d0 at zbus0 # CyberVision 64/3D 322')m4_dnl 323 324m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 325grf0 at grfcc0 326grf1 at grfrt0 327')m4_dnl 328grf2 at grfrh0 329m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 330grf3 at grfcl? 331grf4 at grful0 332grf5 at grfcv0 333grf6 at grfet? 334grf7 at grfcv3d0 335ite0 at grf0 # terminal emulators for grfs 336ite1 at grf1 # terminal emulators for grfs 337')m4_dnl 338ite2 at grf2 # terminal emulators for grfs 339m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 340ite3 at grf3 # terminal emulators for grfs 341ite4 at grf4 # terminal emulators for grfs 342ite5 at grf5 # terminal emulators for grfs 343ite6 at grf6 # terminal emulators for grfs 344ite7 at grf7 # terminal emulators for grfs 345 346#wsdisplay* at grf5 console ? # wsdisplay on top of grf (CV64) 347#wsdisplay* at grf7 console ? # wsdisplay on top of grf (CV64/3D) 348')m4_dnl 349 350msc0 at zbus0 # A2232 MSC multiport serial. 351mfc0 at zbus0 # MultiFaceCard I/O board 352mfcs0 at mfc0 unit 0 # MFC serial 353mfcs1 at mfc0 unit 1 # MFC serial 354#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 355#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 356#mfcs2 at mfc1 unit 0 357#mfcs3 at mfc1 unit 1 358#mfcp1 at mfc1 unit 0 359 360hyper* at zbus? # zbus HyperCom3/3+/4/4+ 361#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 362com* at hyper? port ? # Hypercom3/4 serial ports 363lpt* at hyper? port ? # Hypercom3+/4+ parallel port 364 365#options IOBZCLOCK=22118400 # default, uncomment the next line 366#options IOBZCLOCK=24000000 # if needed. 367 368iobl* at zbus? # zbus IOBlix 369com* at iobl? port ? # IOBlix serial ports 370lpt* at iobl? port ? # IOBlix parallel ports 371 372 373# 374# Keyboard device. Optionally can attach a wskbd. 375# wskbd works together with a wsdisplay so enable them both if you will. 376# Don't enable wskbd if you use ite. 377# 378# XXX in std.amiga: kbd0 at mainbus0 379#wskbd0 at kbd0 console ? 380 381 382m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 383# 384# Amiga Mainboard devices (sans graphics and keyboard) 385# 386 387ser0 at mainbus0 # Amiga onboard serial 388par0 at mainbus0 # Amiga onboard parallel 389ms* at mainbus0 # Amiga mice 390fdc0 at mainbus0 # Amiga FDC 391fd* at fdc0 unit ? # floppy disks on the later 392a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 393a2kbbc0 at mainbus0 # A2000 battery backed clock 394m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 395aucc* at mainbus0 # Amiga CC audio 396audio* at aucc? 397 398spkr* at audio? # PC speaker (synthesized) 399 400a1k2cp0 at mainbus0 # A1200 on-board clockport 401clockport* at a1k2cp0 402 403#com* at clockport? # Individual Computers SilverSurfer 404')m4_dnl 405')m4_dnl 406 407#wsmouse* at ms? 408 409m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 410# 411# DraCo Mainboard devices (sans keyboard) 412# 413 414drbbc0 at mainbus0 # DraCo battery backed clock 415drsupio0 at mainbus0 # DraCo superio chip 416com* at drsupio? port ? # DraCo serial 417lpt0 at drsupio? port ? # DraCo parallel 418')m4_dnl 419 420# 421# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 422# 423 424m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 425m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 426# Alas, Melody-Z2 dont configure in the DraCo bus. 427melody* at zbus0 # Melody MPEG audio decoder 428audio* at melody? 429')m4_dnl 430 431repulse* at zbus0 # ALiENDESiGN Repulse 432audio* at repulse? 433 434toccata* at zbus0 # MacroSystem GmbH Toccata 435audio* at toccata? 436')m4_dnl 437 438# Ethernet cards: 439le* at zbus0 # A2065, Ameristar, Ariadne 440ne* at zbus0 # AriadneII 441ed* at zbus0 # Hydra, ASDG LanRover 442es* at zbus0 # CEI A4066 EthernetPLUS 443qn* at zbus0 # Quicknet 444 445m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 446xsh* at zbus0 # X-Surf 100 447ne* at xshbus? # NE2000 chip on X-Surf 100 448 449xsurf* at zbus0 # X-Surf 450ne* at xsurfbus? # NE2000 chip on X-Surf 451gencp* at xsurfbus? # clockports on X-Surf 452wdc* at xsurfbus? # IDE on X-Surf 453 454clockport* at gencp? 455')m4_dnl 456 457# Arcnet 458bah* at zbus0 # C=/Ameristar A2060 / 560 459 460m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 461# Greater Valley Product Bus 462gvpbus* at zbus0 463 464# scsi stuff, all possible 465gtsc0 at gvpbus? # GVP series II scsi 466scsibus* at gtsc0 467ahsc0 at mainbus0 # A3000 scsi 468scsibus* at ahsc0 469atzsc0 at zbus0 # A2091 scsi 470scsibus* at atzsc0 471wstsc0 at zbus0 # Wordsync II scsi 472scsibus* at wstsc0 473ivsc0 at zbus0 # IVS scsi 474scsibus* at ivsc0 475mlhsc0 at zbus0 # Hacker scsi 476scsibus* at mlhsc0 477otgsc0 at zbus0 # 12 gauge scsi 478scsibus* at otgsc0 479zssc0 at zbus0 # Zeus scsi 480scsibus* at zssc0 481mgnsc0 at zbus0 # Magnum scsi 482scsibus* at mgnsc0 483wesc0 at zbus0 # Warp Engine scsi 484scsibus* at wesc0 485bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi 486scsibus* at bppcsc0 487afsc0 at zbus0 # A4091 scsi 488scsibus* at afsc0 489aftsc0 at mainbus0 # A4000T scsi 490scsibus* at aftsc0 491flsc0 at zbus0 # FastlaneZ3 scsi 492scsibus* at flsc0 493bzsc0 at zbus0 # Blizzard 1230 I,II scsi 494scsibus* at bzsc0 495bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 496scsibus* at bzivsc0 497bztzsc0 at zbus0 # Blizzard 2060 scsi 498scsibus* at bztzsc0 499cbsc0 at zbus0 # CyberSCSI I 500scsibus* at cbsc0 501cbiisc0 at zbus0 # CyberSCSI II 502scsibus* at cbiisc0 503cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 504scsibus* at cbiiisc0 505empsc0 at zbus0 # Emplant scsi 506scsibus* at empsc0 507 508acafh0 at mainbus0 # Individual Computers ACA500 509wdc* at acafhbus? # CF slots on ACA500 510gencp* at acafhbus? # clockport on ACA500 511 512wdc0 at mainbus0 # A4000 & A1200 IDE bus 513wdc* at zbus0 # Buddha / Catweasel 514#efa0 at mainbus0 # ELBOX FastATA 1200 Mk-III/Mk-IV 515 516atabus* at wdc? channel ? # ATA bus 517#atabus* at efa? channel ? # ATA bus 518atabus* at ata? channel ? # ATA bus 519wd* at atabus? drive ? # + drives 520atapibus* at atabus? # ATAPI bus 521cd* at atapibus? drive ? # ATAPI CD-ROM drives 522sd* at atapibus? drive ? # ATAPI disk drives 523 524pccard0 at mainbus0 525pcmcia* at pccard0 526com* at pcmcia? function ? # Modems and serial cards 527pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 528aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 529wdc* at pcmcia? function ? 530awi* at pcmcia? function ? # BayStack 650 (802.11FH) 531ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 532mbe* at pcmcia? function ? # MB8696x based Ethernet 533ne* at pcmcia? function ? # NE2000-compatible Ethernet 534sm* at pcmcia? function ? # Megahertz Ethernet 535mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 536com* at mhzc? 537sm* at mhzc? 538 539nsphyter* at mii? phy ? # NS83843 PHYs 540ukphy* at mii? phy ? # generic unknown PHYs 541')m4_dnl 542 543m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 544drsc0 at mainbus0 # DraCo scsi 545scsibus* at drsc0 546')m4_dnl 547 548 549# each hard drive from low target to high 550# will configure to the next available sd unit number 551sd* at scsibus? target ? lun ? # scsi disks 552st* at scsibus? target ? lun ? # scsi tapes 553cd* at scsibus? target ? lun ? # scsi cds 554ch* at scsibus? target ? lun ? # scsi autochangers 555m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 556ss* at scsibus? target ? lun ? # scsi scanner 557uk* at scsibus? target ? lun ? # scsi unknown 558')m4_dnl 559m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 560 561# PCI bus support 562options PCIVERBOSE # verbose PCI device autoconfig messages 563#options PCI_CONFIG_DUMP 564options PCI_NETBSD_CONFIGURE # supported by mppb(4), p5pb(4), empb(4) 565 566p5pb0 at p5bus0 # Phase5 PCI bridge (CVPPC/BVPPC/G-REX) 567p5membar* at zbus0 # Phase5 PCI bridge autoconfiguring BARs 568#options P5PB_DEBUG # enable excessive debug for p5pb 569#options P5PB_CONSOLE # console on CVPPC/BVPPC/Voodoo3 570pci* at p5pb0 571 572mppb* at zbus0 # Matay Prometheus Zorro-PCI bridge 573pci* at mppb? 574 575empb0 at zbus0 # ELBOX Mediator PCI 1200 576em4k0 at zbus0 # ELBOX Mediator PCI 4000 577emmem0 at zbus0 # ELBOX Mediator PCI memory space 578empm0 at empb0 # ELBOX Mediator PCI Power Management 579pci* at empb0 580pci* at em4k0 581 582#cv3dpb* at zbus0 # CyberVision 64/3D PCI bridge 583 584#genfb* at pci? # generic fb, CVPPC/BVPPC only 585#voodoofb* at pci? # 3Dfx Voodoo 3 in G-REX 586#radeonfb* at pci? # untested 587 588ne* at pci? # NE2000 Ethernet 589satalink* at pci? dev ? function ? flags 0x0002 # SiI SATALink 3112 590 591# Bluetooth Controller and Device support 592# tested only with btuart on an A1200 593 594# Bluetooth PCMCIA Controllers 595bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A 596btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139 597 598# Bluetooth Device Hub 599bthub* at bcsp? 600bthub* at bt3c? 601bthub* at btbc? 602bthub* at btuart? 603 604# Bluetooth HID support 605bthidev* at bthub? 606 607# Bluetooth Mouse 608#btms* at bthidev? reportid ? 609#wsmouse* at btms? mux 0 610 611# Bluetooth Keyboard 612#btkbd* at bthidev? reportid ? 613#wskbd* at btkbd? console ? mux 1 614 615# Bluetooth Apple Magic Mouse 616#btmagic* at bthub? 617#wsmouse* at btmagic? mux 0 618 619# Bluetooth Audio support 620#btsco* at bthub? 621 622# USB 623slhci* at zbus? # Thylacine 624usb* at slhci? 625 626uhub* at usb? 627uhub* at uhub? port ? 628 629uhidev* at uhub? port ? configuration ? interface ? 630uhid* at uhidev? reportid ? 631 632')m4_dnl 633m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 634# 635# accept filters 636pseudo-device accf_data # "dataready" accept filter 637pseudo-device accf_http # "httpready" accept filter 638')m4_dnl 639 640pseudo-device loop # loopback network interface 641pseudo-device sl # SLIP network interfaces 642pseudo-device ppp # PPP network interfaces 643pseudo-device pppoe # PPP over Ethernet (RFC 2516) 644pseudo-device tun # network tunnel line discipline 645pseudo-device tap # virtual Ethernet 646#pseudo-device gre # generic L3 over IP tunnel 647pseudo-device bpfilter # Berkeley packet filter 648#pseudo-device carp # Common Address Redundancy Protocol 649pseudo-device npf # NPF packet filter 650pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 651#pseudo-device faith # IPv[46] tcp relay translation i/f 652pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 653pseudo-device vlan # IEEE 802.1q encapsulation 654pseudo-device bridge # simple inter-network bridging 655#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 656pseudo-device agr # IEEE 802.3ad link aggregation 657m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 658#pseudo-device fss # file system snapshot device 659', `m4_dnl 660pseudo-device fss # file system snapshot device 661')m4_dnl 662m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 663#pseudo-device putter # for puffs and pud 664', `m4_dnl 665pseudo-device putter # for puffs and pud 666')m4_dnl 667 668pseudo-device view 4 # views (needed for grfcc) 669m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 670pseudo-device pty # pseudo-terminals 671', `m4_dnl 672pseudo-device pty # pseudo-terminals 673')m4_dnl 674pseudo-device clockctl # user control of clock subsystem 675 676#pseudo-device wsfont # wsfont(4) dynamic font loading support 677#pseudo-device wsmux # mouse & keyboard multiplexor 678 679pseudo-device vnd # vnode pseudo-disks 680#options VND_COMPRESSION # compressed vnd(4) 681pseudo-device ccd # concatenated disk devices 682#pseudo-device cgd # cryptographic disk devices 683pseudo-device raid # RAIDframe disk driver 684options RAID_AUTOCONFIG # auto-configuration of RAID components 685# Options to enable various other RAIDframe RAID types. 686# options RF_INCLUDE_EVENODD=1 687# options RF_INCLUDE_RAID5_RS=1 688# options RF_INCLUDE_PARITYLOGGING=1 689# options RF_INCLUDE_CHAINDECLUSTER=1 690# options RF_INCLUDE_INTERDECLUSTER=1 691# options RF_INCLUDE_PARITY_DECLUSTERING=1 692# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 693 694#options RND_COM # use "com" randomness as well (BROKEN) 695 696m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 697pseudo-device ksyms # /dev/ksyms (kernel symbols) 698pseudo-device nsmb # experimental - SMB requester 699')m4_dnl 700m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 701pseudo-device bcsp # BlueCore Serial Protocol 702pseudo-device btuart # Bluetooth HCI UART (H4) 703')m4_dnl 704 705# Veriexec 706# 707# a pseudo device needed for veriexec 708#pseudo-device veriexec 709# 710# Uncomment the fingerprint methods below that are desired. Note that 711# removing fingerprint methods will have almost no impact on the kernel 712# code size. 713# 714#options VERIFIED_EXEC_FP_SHA256 715#options VERIFIED_EXEC_FP_SHA384 716#options VERIFIED_EXEC_FP_SHA512 717 718config netbsd root on ? type ? 719