GENERIC.in revision 1.21
1# $NetBSD: GENERIC.in,v 1.21 2004/06/22 14:09:50 itojun Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21m4_divert(-1) 22# 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make GENERIC extracts the GENERIC configuration file. 30# make INSTALL extracts the INSTALL configuration file. 31# make WSCONS extracts the WSCONS configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48# If building WSCONS, uncomment various options 49# 50m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') 51 52 53m4_divert(0)m4_dnl 54 55include "arch/amiga/conf/std.amiga" 56 57options INCLUDE_CONFIG_FILE # embed config file in kernel binary 58 59#ident "GENERIC-$Revision: 1.21 $" 60 61m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 62makeoptions COPTS="-Os" 63')m4_dnl 64 65maxusers 8 66options RTC_OFFSET=0 67 68# 69# mainboards to support (in addition to Amiga) 70# 71m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 72options DRACO 73')m4_dnl 74m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 75options BB060STUPIDROM # You need this, if you have a non-DraCo 76 # MC68060 with an OS ROM up to (at least) 77 # V40 (OS3.1) and want to boot with the 78 # bootblock. 79 # You do not need this if you have a DraCo, 80 # have no 68060 or NEVER use the bootblock 81options P5PPC68KBOARD # Phase5 PPC/68K board support 82')m4_dnl 83# 84# processors this kernel should support 85# 86options M68060 # support for 060 87options M060SP # MC68060 software support (Required for 060) 88m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 89options M68040 # support for 040 90options FPSP # MC68040 floating point support 91options M68030 # support for 030 92options M68020 # support for 020/851 93options FPU_EMULATE # FPU emulation 94')m4_dnl 95 96# 97# Networking options 98# 99options INET # IP networking support (Required) 100options INET6 # IPV6 101#options IPSEC # IP security 102#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 103#options IPSEC_DEBUG # debug for IP security 104#options GATEWAY # Packet forwarding 105#options DIRECTED_BROADCAST # Broadcast across subnets 106 107m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 108#options MROUTING # Multicast routing 109options NS # XNS 110#options NSIP # XNS tunneling over IP 111options ISO,TPIP # OSI 112#options EON # OSI tunneling over IP 113options CCITT,LLC,HDLC # X.25 114options NETATALK # AppleTalk networking protocols 115#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 116')m4_dnl 117 118options PPP_BSDCOMP # BSD-Compress compression support for PPP 119options PPP_DEFLATE # Deflate compression support for PPP 120options PPP_FILTER # Active filter support for PPP (requires bpf) 121options PFIL_HOOKS # pfil(9) packet filter hooks 122options IPFILTER_LOG # ipmon(8) log support 123#options IPFILTER_DEFAULT_BLOCK # block all packets by default 124 125# Filesystems 126file-system FFS # Berkeley fast file system 127file-system EXT2FS # second extended file system (linux) 128#file-system LFS # log-structured filesystem (experimental) 129 130m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 131file-system MFS # Memory based filesystem 132')m4_dnl 133 134file-system NFS # Network File System client side code 135file-system ADOSFS # AmigaDOS file system 136file-system CD9660 # ISO 9660 + Rock Ridge filesystem 137file-system MSDOSFS # MS-DOS filesystem 138 139file-system KERNFS # kernel data-structure filesystem 140 141m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 142file-system FDESC # user file descriptor filesystem 143file-system NULLFS # loopback filesystem 144file-system OVERLAY # overlay filesystem 145#file-system PORTAL # Portal filesystem 146file-system PROCFS # /proc filesystem 147file-system UMAPFS # NULLFS + uid and gid remapping 148file-system UNION # union filesystem 149')m4_dnl 150 151# Filesystem options 152 153#options FFS_EI # FFS Endian Independant support 154 155m4_ifdef(`INSTALL_CONFIGURATION', ` 156options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 157', `m4_dnl 158options QUOTA # User and group quotas in FFS 159options SOFTDEP # FFS soft updates support. 160options NFSSERVER # Network File System server side code 161')m4_dnl 162 163#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 164 # immutable) behave as system flags. 165 166# 167# Compatibility options for various existing systems 168# 169 170m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 171#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 172options COMPAT_43 # compatibility with 4.3BSD interfaces 173options COMPAT_09 # compatibility with NetBSD 0.9 174options COMPAT_10 # compatibility with NetBSD 1.0 175options COMPAT_12 # compatibility with NetBSD 1.2 176options COMPAT_13 # compatibility with NetBSD 1.3 177options COMPAT_14 # compatibility with NetBSD 1.4 178options COMPAT_15 # compatibility with NetBSD 1.5 179options COMPAT_16 # compatibility with NetBSD 1.6 180options COMPAT_SUNOS # Support to run Sun (m68k) executables 181options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 182options COMPAT_NOMID # allow nonvalid machine id executables 183#options COMPAT_LINUX # Support to run Linux/m68k executables 184')m4_dnl 185 186options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 187options COMPAT_AOUT_M68K # actually make some system calls work. 188 189m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 190# 191# Support for System V IPC facilities. 192# 193options SYSVSHM # System V-like shared memory 194options SYSVMSG # System V-like messages 195options SYSVSEM # System V-like semaphores 196#options SEMMNI=10 # number of semaphore identifiers 197#options SEMMNS=60 # number of semaphores in system 198#options SEMUME=10 # max number of undo entries per process 199#options SEMMNU=30 # number of undo structures in system 200')m4_dnl 201 202# 203# Support for various kernel options 204# 205 206m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 207options KTRACE # system call tracing support 208options SYSTRACE # system call vetting via systrace(1) 209options LKM # Loadable kernel modules 210')m4_dnl 211#options INSECURE # disable kernel security levels 212options SCSIVERBOSE # human readable SCSI error messages 213options USERCONF # userconf(4) support 214m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 215options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 216options MALLOC_NOINLINE # Not inlining MALLOC saves memory 217', `m4_dnl 218options NTP # NTP phase/frequency locked loop 219#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 220')m4_dnl 221 222# Enable experimental buffer queue strategy for better responsiveness under 223# high disk I/O load. Use it with caution - it's not proven to be stable yet. 224#options NEW_BUFQ_STRATEGY 225 226# 227# Misc. debugging options 228# 229options DDB # Kernel debugger 230#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 231options DIAGNOSTIC # Extra kernel sanity checks 232#options DEBUG # Enable misc. kernel debugging code 233#options SYSCALL_DEBUG # debug all syscalls. 234#options SCSIDEBUG # Add SCSI debugging statements 235#options PANICBUTTON # Forced crash via keypress (?) 236 237# 238# Amiga specific options 239# 240#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 241 # first bank of RAM. (default: unlimited) 242#options NKPTADD=4 # set this for 4 additional KPT pages 243#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 244 # per 16 MB (1<<24 bytes) of RAM 245 # uncomment and decrease this, or uncomment and 246 # increase NKPTADD if you get "out of PT pages" 247 # panics. 248 249# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 250# before the 10 secondinterval ends, or that KBDRESET does work at all. 251#options KBDRESET # sync on Ctrl-Amiga-Amiga 252 253# These options improve performance with the built-in serial port 254# on slower Amigas. Try the larger buffers first then lev6_defer. 255#options SERIBUF_SIZE=4096 256#options SEROBUF_SIZE=32 257#options LEV6_DEFER # defers l6 to l4 (below serial l5) 258 259m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 260#options DEVRELOAD # implement /dev/reload 261# # currently only works for a.out kernels 262')m4_dnl 263 264options RETINACONSOLE # enable code to allow retina to be console 265m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 266options ULOWELLCONSOLE # enable code to allow a2410 to be console 267options CL5426CONSOLE # Cirrus console 268options CV64CONSOLE # CyberVision console 269options TSENGCONSOLE # Tseng console 270options CV3DCONSOLE # CyberVision 64/3D console 271 272options GRF_ECS # Enhanced Chip Set 273options GRF_NTSC # NTSC 274options GRF_PAL # PAL 275options GRF_A2024 # Support for the A2024 276options GRF_AGA # AGA Chip Set 277options GRF_AGA_VGA # AGA VGAONLY timing 278options GRF_SUPER72 # AGA Super-72 279')m4_dnl 280#options KFONT_8X11 # 8x11 font 281 282# select a font for the console according to the character set and keymap 283# you want to use 284options KFONT_CONS_ISO8859_1 285#options KFONT_CONS_ISO8859_2 286 287# This is how you would tell the kernel the A2410 oscillator frequencies: 288# The used frequencies are the defaults, and do not need option setting 289#options ULOWELL_OSC1=36000000 290#options ULOWELL_OSC2=66667000 291 292# This is how you specify the blitting speed, higher values may speed up blits 293# a littel bit. If you raise this value too much some trash may appear. 294# the commented version is the default. 295#options RH_MEMCLK=61000000 296# this option enables the 64 bit sprite which does not work 297# for quite a few people. E.g. The cursor sprite will turn to a block 298# when moved to the top of the screen in X. 299#options RH_64BIT_SPRITE 300# enables fast scroll code appears to now work on 040 systems. 301#options RETINA_SPEED_HACK 302# enables the Hardwarecursor which does not work on some systems. 303#options RH_HARDWARECURSOR 304 305m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 306# wscons aware interface to amiga custom chips. 307# If you enable it enable also wskbd. 308# 309m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 310amidisplaycc0 at mainbus0 # wscons interface to custom chips 311wsdisplay0 at amidisplaycc0 console ? 312options WSEMUL_VT100 313options FONT_VT220L8x10 314options FONT_VT220ISO8x16 315', ` 316#amidisplaycc0 at mainbus0 # wscons interface to custom chips 317#wsdisplay0 at amidisplaycc0 console ? 318#options WSEMUL_VT100 319#options FONT_VT220L8x10 320#options FONT_VT220ISO8x16 321')m4_dnl 322')m4_dnl 323 324m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl 325m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 326grfcc0 at mainbus0 # custom chips 327grfrt0 at zbus0 # retina II 328')m4_dnl 329grfrh0 at zbus0 # retina III 330m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 331grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 332grful0 at zbus0 # A2410 333grfcv0 at zbus0 # CyberVision 64 334grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 335grfcv3d0 at zbus0 # CyberVision 64/3D 336')m4_dnl 337 338m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 339grf0 at grfcc0 340grf1 at grfrt0 341')m4_dnl 342grf2 at grfrh0 343m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 344grf3 at grfcl? 345grf4 at grful0 346grf5 at grfcv0 347grf6 at grfet? 348grf7 at grfcv3d0 349ite0 at grf0 # terminal emulators for grfs 350ite1 at grf1 # terminal emulators for grfs 351')m4_dnl 352ite2 at grf2 # terminal emulators for grfs 353m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 354ite3 at grf3 # terminal emulators for grfs 355ite4 at grf4 # terminal emulators for grfs 356ite5 at grf5 # terminal emulators for grfs 357ite6 at grf6 # terminal emulators for grfs 358ite7 at grf7 # terminal emulators for grfs 359')m4_dnl 360')m4_dnl 361 362msc0 at zbus0 # A2232 MSC multiport serial. 363mfc0 at zbus0 # MultiFaceCard I/O board 364mfcs0 at mfc0 unit 0 # MFC serial 365mfcs1 at mfc0 unit 1 # MFC serial 366#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 367#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 368#mfcs2 at mfc1 unit 0 369#mfcs3 at mfc1 unit 1 370#mfcp1 at mfc1 unit 0 371 372hyper* at zbus? # zbus HyperCom3/3+/4/4+ 373#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 374com* at hyper? port ? # Hypercom3/4 serial ports 375lpt* at hyper? port ? # Hypercom3+/4+ parallel port 376 377#options IOBZCLOCK=22118400 # default, uncomment the next line 378#options IOBZCLOCK=24000000 # if needed. 379 380iobl* at zbus? # zbus IOBlix 381com* at iobl? port ? # IOBlix serial ports 382lpt* at iobl? port ? # IOBlix parallel ports 383 384 385# 386# Keyboard device. Optionally can attach a wskbd. 387# wskbd works together with a wsdisplay so enable them both if you will. 388# Don't enable wskbd if you use ite. 389# 390# XXX in std.amiga: kbd0 at mainbus0 391m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 392wskbd0 at kbd0 console ? 393', ` 394#wskbd0 at kbd0 console ? 395')m4_dnl 396 397 398m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 399# 400# Amiga Mainboard devices (sans graphics and keyboard) 401# 402 403ser0 at mainbus0 # Amiga onboard serial 404par0 at mainbus0 # Amiga onboard parallel 405ms* at mainbus0 # Amiga mice 406fdc0 at mainbus0 # Amiga FDC 407fd* at fdc0 unit ? # floppy disks on the later 408a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 409a2kbbc0 at mainbus0 # A2000 battery backed clock 410m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 411aucc* at mainbus0 # Amiga CC audio 412audio* at aucc? 413')m4_dnl 414')m4_dnl 415 416m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 417wsmouse* at ms? 418', ` 419#wsmouse* at ms? 420')m4_dnl 421 422m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 423# 424# DraCo Mainboard devices (sans keyboard) 425# 426 427drbbc0 at mainbus0 # DraCo battery backed clock 428drsupio0 at mainbus0 # DraCo superio chip 429com* at drsupio? port ? # DraCo serial 430lpt0 at drsupio? port ? # DraCo parallel 431')m4_dnl 432 433# 434# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 435# 436 437m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 438m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 439# Alas, Melody-Z2 dont configure in the DraCo bus. 440melody* at zbus0 # Melody MPEG audio decoder 441audio* at melody? 442')m4_dnl 443 444repulse* at zbus0 # ALiENDESiGN Repulse 445audio* at repulse? 446 447toccata* at zbus0 # MacroSystem GmbH Toccata 448audio* at toccata? 449')m4_dnl 450 451# Ethernet cards: 452le* at zbus0 # A2065, Ameristar, Ariadne 453ne* at zbus0 # AriadneII, X-surf 454ed* at zbus0 # Hydra, ASDG LanRover 455es* at zbus0 # CEI A4066 EthernetPLUS 456qn* at zbus0 # Quicknet 457 458# Arcnet 459bah* at zbus0 # C=/Ameristar A2060 / 560 460 461m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 462# Greater Valley Product Bus 463gvpbus* at zbus0 464 465# scsi stuff, all possible 466gtsc0 at gvpbus? # GVP series II scsi 467scsibus* at gtsc0 468ahsc0 at mainbus0 # A3000 scsi 469scsibus* at ahsc0 470atzsc0 at zbus0 # A2091 scsi 471scsibus* at atzsc0 472wstsc0 at zbus0 # Wordsync II scsi 473scsibus* at wstsc0 474ivsc0 at zbus0 # IVS scsi 475scsibus* at ivsc0 476mlhsc0 at zbus0 # Hacker scsi 477scsibus* at mlhsc0 478otgsc0 at zbus0 # 12 gauge scsi 479scsibus* at otgsc0 480zssc0 at zbus0 # Zeus scsi 481scsibus* at zssc0 482mgnsc0 at zbus0 # Magnum scsi 483scsibus* at mgnsc0 484wesc0 at zbus0 # Warp Engine scsi 485scsibus* at wesc0 486afsc0 at zbus0 # A4091 scsi 487scsibus* at afsc0 488aftsc0 at mainbus0 # A4000T scsi 489scsibus* at aftsc0 490flsc0 at zbus0 # FastlaneZ3 scsi 491scsibus* at flsc0 492bzsc0 at zbus0 # Blizzard 1230 I,II scsi 493scsibus* at bzsc0 494bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 495scsibus* at bzivsc0 496bztzsc0 at zbus0 # Blizzard 2060 scsi 497scsibus* at bztzsc0 498cbsc0 at zbus0 # CyberSCSI I 499scsibus* at cbsc0 500cbiisc0 at zbus0 # CyberSCSI II 501scsibus* at cbiisc0 502cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 503scsibus* at cbiiisc0 504empsc0 at zbus0 # Emplant scsi 505scsibus* at empsc0 506#idesc0 at mainbus0 # A4000 & A1200 IDE 507#scsibus* at idesc0 508 509# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 510# <<< are uncommented >>> 511wdc0 at mainbus0 # A4000 & A1200 IDE bus 512atabus* at wdc? channel ? # ATA bus 513wd* at atabus? drive ? # + drives 514atapibus* at atabus? # ATAPI bus 515cd* at atapibus? drive ? # ATAPI CD-ROM drives 516sd* at atapibus? drive ? # ATAPI disk drives 517 518pccard0 at mainbus0 519pcmcia* at pccard0 520com* at pcmcia? function ? # Modems and serial cards 521pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 522aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 523wdc* at pcmcia? function ? 524awi* at pcmcia? function ? # BayStack 650 (802.11FH) 525ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 526mbe* at pcmcia? function ? # MB8696x based Ethernet 527ne* at pcmcia? function ? # NE2000-compatible Ethernet 528sm* at pcmcia? function ? # Megahertz Ethernet 529mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 530com* at mhzc? 531sm* at mhzc? 532 533')m4_dnl 534 535m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 536drsc0 at mainbus0 # DraCo scsi 537scsibus* at drsc0 538')m4_dnl 539 540 541# each hard drive from low target to high 542# will configure to the next available sd unit number 543sd* at scsibus? target ? lun ? # scsi disks 544st* at scsibus? target ? lun ? # scsi tapes 545cd* at scsibus? target ? lun ? # scsi cds 546ch* at scsibus? target ? lun ? # scsi autochangers 547m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 548ss* at scsibus? target ? lun ? # scsi scanner 549uk* at scsibus? target ? lun ? # scsi unknown 550')m4_dnl 551 552pseudo-device loop # loopback network interface 553pseudo-device sl 1 # SLIP network interfaces 554pseudo-device ppp 1 # PPP network interfaces 555pseudo-device pppoe # PPP over Ethernet (RFC 2516) 556pseudo-device tun 1 # network tunnel line discipline 557#pseudo-device gre 2 # generic L3 over IP tunnel 558pseudo-device bpfilter 16 # Berkeley packet filter 559pseudo-device ipfilter # IP Filter package 560pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 561#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 562#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 563pseudo-device vlan # IEEE 802.1q encapsulation 564pseudo-device bridge # simple inter-network bridging 565#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 566#pseudo-device pf # PF packet filter 567#pseudo-device pflog # PF log if 568 569pseudo-device view 4 # views (needed for grfcc) 570m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 571pseudo-device pty 2 # pseudo-terminals 572', `m4_dnl 573pseudo-device pty # pseudo-terminals 574')m4_dnl 575pseudo-device clockctl # user control of clock subsystem 576 577m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 578pseudo-device wsfont # wsfont(4) dynamic font loading support 579', `m4_dnl 580#pseudo-device wsfont # wsfont(4) dynamic font loading support 581')m4_dnl 582 583pseudo-device vnd 4 # vnode pseudo-disks 584pseudo-device ccd 4 # concatenated disk devices 585#pseudo-device cgd 4 # cryptographic disk devices 586pseudo-device raid 8 # RAIDframe disk driver 587options RAID_AUTOCONFIG # auto-configuration of RAID components 588# Options to enable various other RAIDframe RAID types. 589# options RF_INCLUDE_EVENODD=1 590# options RF_INCLUDE_RAID5_RS=1 591# options RF_INCLUDE_PARITYLOGGING=1 592# options RF_INCLUDE_CHAINDECLUSTER=1 593# options RF_INCLUDE_INTERDECLUSTER=1 594# options RF_INCLUDE_PARITY_DECLUSTERING=1 595# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 596 597pseudo-device rnd # /dev/random and in-kernel generator 598#options RND_COM # use "com" randomness as well (BROKEN) 599 600m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 601pseudo-device ksyms # /dev/ksyms (kernel symbols) 602')m4_dnl 603 604config netbsd root on ? type ? 605