GENERIC.in revision 1.29
1# $NetBSD: GENERIC.in,v 1.29 2005/01/28 03:19:49 rumble Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21m4_divert(-1) 22# 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make GENERIC extracts the GENERIC configuration file. 30# make INSTALL extracts the INSTALL configuration file. 31# make WSCONS extracts the WSCONS configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48# If building WSCONS, uncomment various options 49# 50m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') 51 52 53m4_divert(0)m4_dnl 54 55include "arch/amiga/conf/std.amiga" 56 57options INCLUDE_CONFIG_FILE # embed config file in kernel binary 58 59#ident "GENERIC-$Revision: 1.29 $" 60 61m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 62makeoptions COPTS="-Os" 63')m4_dnl 64 65maxusers 8 66options RTC_OFFSET=0 67 68# 69# mainboards to support (in addition to Amiga) 70# 71m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 72options DRACO 73')m4_dnl 74m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 75options BB060STUPIDROM # You need this, if you have a non-DraCo 76 # MC68060 with an OS ROM up to (at least) 77 # V40 (OS3.1) and want to boot with the 78 # bootblock. 79 # You do not need this if you have a DraCo, 80 # have no 68060 or NEVER use the bootblock 81options P5PPC68KBOARD # Phase5 PPC/68K board support 82')m4_dnl 83# 84# processors this kernel should support 85# 86options M68060 # support for 060 87options M060SP # MC68060 software support (Required for 060) 88m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 89options M68040 # support for 040 90options FPSP # MC68040 floating point support 91options M68030 # support for 030 92options M68020 # support for 020/851 93options FPU_EMULATE # FPU emulation 94')m4_dnl 95 96# 97# Networking options 98# 99options INET # IP networking support (Required) 100options INET6 # IPV6 101#options IPSEC # IP security 102#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 103#options IPSEC_DEBUG # debug for IP security 104#options GATEWAY # Packet forwarding 105#options DIRECTED_BROADCAST # Broadcast across subnets 106 107m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 108#options MROUTING # Multicast routing 109#options PIM # Protocol Independent Multicast 110options NS # XNS 111#options NSIP # XNS tunneling over IP 112options ISO,TPIP # OSI 113#options EON # OSI tunneling over IP 114options CCITT,LLC,HDLC # X.25 115options NETATALK # AppleTalk networking protocols 116#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 117')m4_dnl 118 119options PPP_BSDCOMP # BSD-Compress compression support for PPP 120options PPP_DEFLATE # Deflate compression support for PPP 121options PPP_FILTER # Active filter support for PPP (requires bpf) 122options PFIL_HOOKS # pfil(9) packet filter hooks 123options IPFILTER_LOG # ipmon(8) log support 124#options IPFILTER_DEFAULT_BLOCK # block all packets by default 125 126#options ALTQ # Manipulate network interfaces' output queues 127#options ALTQ_BLUE # Stochastic Fair Blue 128#options ALTQ_CBQ # Class-Based Queueing 129#options ALTQ_CDNR # Diffserv Traffic Conditioner 130#options ALTQ_FIFOQ # First-In First-Out Queue 131#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 132#options ALTQ_HFSC # Hierarchical Fair Service Curve 133#options ALTQ_LOCALQ # Local queueing discipline 134#options ALTQ_PRIQ # Priority Queueing 135#options ALTQ_RED # Random Early Detection 136#options ALTQ_RIO # RED with IN/OUT 137#options ALTQ_WFQ # Weighted Fair Queueing 138 139# Filesystems 140file-system FFS # Berkeley fast file system 141file-system EXT2FS # second extended file system (linux) 142#file-system LFS # log-structured filesystem (experimental) 143 144m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 145file-system MFS # Memory based filesystem 146')m4_dnl 147 148file-system NFS # Network File System client side code 149file-system ADOSFS # AmigaDOS file system 150file-system CD9660 # ISO 9660 + Rock Ridge filesystem 151file-system MSDOSFS # MS-DOS filesystem 152 153file-system KERNFS # kernel data-structure filesystem 154 155m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 156file-system FDESC # user file descriptor filesystem 157file-system NULLFS # loopback filesystem 158file-system OVERLAY # overlay filesystem 159#file-system PORTAL # Portal filesystem 160file-system PROCFS # /proc filesystem 161file-system UMAPFS # NULLFS + uid and gid remapping 162file-system UNION # union filesystem 163')m4_dnl 164 165# Filesystem options 166 167#options FFS_EI # FFS Endian Independant support 168 169m4_ifdef(`INSTALL_CONFIGURATION', ` 170options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 171', `m4_dnl 172options QUOTA # User and group quotas in FFS 173options SOFTDEP # FFS soft updates support. 174#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 175options NFSSERVER # Network File System server side code 176')m4_dnl 177 178#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 179 # immutable) behave as system flags. 180 181# 182# Compatibility options for various existing systems 183# 184 185m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 186#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 187options COMPAT_43 # compatibility with 4.3BSD interfaces 188options COMPAT_09 # compatibility with NetBSD 0.9 189options COMPAT_10 # compatibility with NetBSD 1.0 190options COMPAT_12 # compatibility with NetBSD 1.2 191options COMPAT_13 # compatibility with NetBSD 1.3 192options COMPAT_14 # compatibility with NetBSD 1.4 193options COMPAT_15 # compatibility with NetBSD 1.5 194options COMPAT_16 # compatibility with NetBSD 1.6 195options COMPAT_SUNOS # Support to run Sun (m68k) executables 196options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 197options COMPAT_NOMID # allow nonvalid machine id executables 198#options COMPAT_LINUX # Support to run Linux/m68k executables 199')m4_dnl 200 201options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 202options COMPAT_AOUT_M68K # actually make some system calls work. 203options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 204 205m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 206# 207# Support for System V IPC facilities. 208# 209options SYSVSHM # System V-like shared memory 210options SYSVMSG # System V-like messages 211options SYSVSEM # System V-like semaphores 212#options SEMMNI=10 # number of semaphore identifiers 213#options SEMMNS=60 # number of semaphores in system 214#options SEMUME=10 # max number of undo entries per process 215#options SEMMNU=30 # number of undo structures in system 216options P1003_1B_SEMAPHORE # p1003.1b semaphore support 217')m4_dnl 218 219# 220# Support for various kernel options 221# 222 223m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 224options KTRACE # system call tracing support 225options SYSTRACE # system call vetting via systrace(1) 226options LKM # Loadable kernel modules 227')m4_dnl 228#options INSECURE # disable kernel security levels 229options SCSIVERBOSE # human readable SCSI error messages 230options USERCONF # userconf(4) support 231m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 232options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 233options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 234options MALLOC_NOINLINE # Not inlining MALLOC saves memory 235', `m4_dnl 236options NTP # NTP phase/frequency locked loop 237#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 238')m4_dnl 239 240# Enable experimental buffer queue strategy for better responsiveness under 241# high disk I/O load. Use it with caution - it's not proven to be stable yet. 242#options NEW_BUFQ_STRATEGY 243 244# 245# Misc. debugging options 246# 247options DDB # Kernel debugger 248#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 249options DIAGNOSTIC # Extra kernel sanity checks 250#options DEBUG # Enable misc. kernel debugging code 251#options SYSCALL_DEBUG # debug all syscalls. 252#options SCSIDEBUG # Add SCSI debugging statements 253#options PANICBUTTON # Forced crash via keypress (?) 254 255# 256# Amiga specific options 257# 258#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 259 # first bank of RAM. (default: unlimited) 260#options NKPTADD=4 # set this for 4 additional KPT pages 261#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 262 # per 16 MB (1<<24 bytes) of RAM 263 # uncomment and decrease this, or uncomment and 264 # increase NKPTADD if you get "out of PT pages" 265 # panics. 266 267# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 268# before the 10 secondinterval ends, or that KBDRESET does work at all. 269#options KBDRESET # sync on Ctrl-Amiga-Amiga 270 271# These options improve performance with the built-in serial port 272# on slower Amigas. Try the larger buffers first then lev6_defer. 273#options SERIBUF_SIZE=4096 274#options SEROBUF_SIZE=32 275#options LEV6_DEFER # defers l6 to l4 (below serial l5) 276 277m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 278#options DEVRELOAD # implement /dev/reload 279# # currently only works for a.out kernels 280')m4_dnl 281 282options RETINACONSOLE # enable code to allow retina to be console 283m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 284options ULOWELLCONSOLE # enable code to allow a2410 to be console 285options CL5426CONSOLE # Cirrus console 286options CV64CONSOLE # CyberVision console 287options TSENGCONSOLE # Tseng console 288options CV3DCONSOLE # CyberVision 64/3D console 289 290options GRF_ECS # Enhanced Chip Set 291options GRF_NTSC # NTSC 292options GRF_PAL # PAL 293options GRF_A2024 # Support for the A2024 294options GRF_AGA # AGA Chip Set 295options GRF_AGA_VGA # AGA VGAONLY timing 296options GRF_SUPER72 # AGA Super-72 297')m4_dnl 298#options KFONT_8X11 # 8x11 font 299 300# select a font for the console according to the character set and keymap 301# you want to use 302options KFONT_CONS_ISO8859_1 303#options KFONT_CONS_ISO8859_2 304 305# This is how you would tell the kernel the A2410 oscillator frequencies: 306# The used frequencies are the defaults, and do not need option setting 307#options ULOWELL_OSC1=36000000 308#options ULOWELL_OSC2=66667000 309 310# This is how you specify the blitting speed, higher values may speed up blits 311# a littel bit. If you raise this value too much some trash may appear. 312# the commented version is the default. 313#options RH_MEMCLK=61000000 314# this option enables the 64 bit sprite which does not work 315# for quite a few people. E.g. The cursor sprite will turn to a block 316# when moved to the top of the screen in X. 317#options RH_64BIT_SPRITE 318# enables fast scroll code appears to now work on 040 systems. 319#options RETINA_SPEED_HACK 320# enables the Hardwarecursor which does not work on some systems. 321#options RH_HARDWARECURSOR 322 323m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 324# wscons aware interface to amiga custom chips. 325# If you enable it enable also wskbd. 326# 327m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 328amidisplaycc0 at mainbus0 # wscons interface to custom chips 329wsdisplay0 at amidisplaycc0 console ? 330options WSEMUL_VT100 331options FONT_VT220L8x10 332options FONT_VT220ISO8x16 333', ` 334#amidisplaycc0 at mainbus0 # wscons interface to custom chips 335#wsdisplay0 at amidisplaycc0 console ? 336#options WSEMUL_VT100 337#options FONT_VT220L8x10 338#options FONT_VT220ISO8x16 339')m4_dnl 340')m4_dnl 341 342m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl 343m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 344grfcc0 at mainbus0 # custom chips 345grfrt0 at zbus0 # retina II 346')m4_dnl 347grfrh0 at zbus0 # retina III 348m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 349grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 350grful0 at zbus0 # A2410 351grfcv0 at zbus0 # CyberVision 64 352grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 353grfcv3d0 at zbus0 # CyberVision 64/3D 354')m4_dnl 355 356m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 357grf0 at grfcc0 358grf1 at grfrt0 359')m4_dnl 360grf2 at grfrh0 361m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 362grf3 at grfcl? 363grf4 at grful0 364grf5 at grfcv0 365grf6 at grfet? 366grf7 at grfcv3d0 367ite0 at grf0 # terminal emulators for grfs 368ite1 at grf1 # terminal emulators for grfs 369')m4_dnl 370ite2 at grf2 # terminal emulators for grfs 371m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 372ite3 at grf3 # terminal emulators for grfs 373ite4 at grf4 # terminal emulators for grfs 374ite5 at grf5 # terminal emulators for grfs 375ite6 at grf6 # terminal emulators for grfs 376ite7 at grf7 # terminal emulators for grfs 377')m4_dnl 378')m4_dnl 379 380msc0 at zbus0 # A2232 MSC multiport serial. 381mfc0 at zbus0 # MultiFaceCard I/O board 382mfcs0 at mfc0 unit 0 # MFC serial 383mfcs1 at mfc0 unit 1 # MFC serial 384#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 385#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 386#mfcs2 at mfc1 unit 0 387#mfcs3 at mfc1 unit 1 388#mfcp1 at mfc1 unit 0 389 390hyper* at zbus? # zbus HyperCom3/3+/4/4+ 391#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 392com* at hyper? port ? # Hypercom3/4 serial ports 393lpt* at hyper? port ? # Hypercom3+/4+ parallel port 394 395#options IOBZCLOCK=22118400 # default, uncomment the next line 396#options IOBZCLOCK=24000000 # if needed. 397 398iobl* at zbus? # zbus IOBlix 399com* at iobl? port ? # IOBlix serial ports 400lpt* at iobl? port ? # IOBlix parallel ports 401 402 403# 404# Keyboard device. Optionally can attach a wskbd. 405# wskbd works together with a wsdisplay so enable them both if you will. 406# Don't enable wskbd if you use ite. 407# 408# XXX in std.amiga: kbd0 at mainbus0 409m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 410wskbd0 at kbd0 console ? 411', ` 412#wskbd0 at kbd0 console ? 413')m4_dnl 414 415 416m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 417# 418# Amiga Mainboard devices (sans graphics and keyboard) 419# 420 421ser0 at mainbus0 # Amiga onboard serial 422par0 at mainbus0 # Amiga onboard parallel 423ms* at mainbus0 # Amiga mice 424fdc0 at mainbus0 # Amiga FDC 425fd* at fdc0 unit ? # floppy disks on the later 426a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 427a2kbbc0 at mainbus0 # A2000 battery backed clock 428m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 429aucc* at mainbus0 # Amiga CC audio 430audio* at aucc? 431')m4_dnl 432')m4_dnl 433 434m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 435wsmouse* at ms? 436', ` 437#wsmouse* at ms? 438')m4_dnl 439 440m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 441# 442# DraCo Mainboard devices (sans keyboard) 443# 444 445drbbc0 at mainbus0 # DraCo battery backed clock 446drsupio0 at mainbus0 # DraCo superio chip 447com* at drsupio? port ? # DraCo serial 448lpt0 at drsupio? port ? # DraCo parallel 449')m4_dnl 450 451# 452# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 453# 454 455m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 456m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 457# Alas, Melody-Z2 dont configure in the DraCo bus. 458melody* at zbus0 # Melody MPEG audio decoder 459audio* at melody? 460')m4_dnl 461 462repulse* at zbus0 # ALiENDESiGN Repulse 463audio* at repulse? 464 465toccata* at zbus0 # MacroSystem GmbH Toccata 466audio* at toccata? 467')m4_dnl 468 469# Ethernet cards: 470le* at zbus0 # A2065, Ameristar, Ariadne 471ne* at zbus0 # AriadneII, X-surf 472ed* at zbus0 # Hydra, ASDG LanRover 473es* at zbus0 # CEI A4066 EthernetPLUS 474qn* at zbus0 # Quicknet 475 476# Arcnet 477bah* at zbus0 # C=/Ameristar A2060 / 560 478 479m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 480# Greater Valley Product Bus 481gvpbus* at zbus0 482 483# scsi stuff, all possible 484gtsc0 at gvpbus? # GVP series II scsi 485scsibus* at gtsc0 486ahsc0 at mainbus0 # A3000 scsi 487scsibus* at ahsc0 488atzsc0 at zbus0 # A2091 scsi 489scsibus* at atzsc0 490wstsc0 at zbus0 # Wordsync II scsi 491scsibus* at wstsc0 492ivsc0 at zbus0 # IVS scsi 493scsibus* at ivsc0 494mlhsc0 at zbus0 # Hacker scsi 495scsibus* at mlhsc0 496otgsc0 at zbus0 # 12 gauge scsi 497scsibus* at otgsc0 498zssc0 at zbus0 # Zeus scsi 499scsibus* at zssc0 500mgnsc0 at zbus0 # Magnum scsi 501scsibus* at mgnsc0 502wesc0 at zbus0 # Warp Engine scsi 503scsibus* at wesc0 504afsc0 at zbus0 # A4091 scsi 505scsibus* at afsc0 506aftsc0 at mainbus0 # A4000T scsi 507scsibus* at aftsc0 508flsc0 at zbus0 # FastlaneZ3 scsi 509scsibus* at flsc0 510bzsc0 at zbus0 # Blizzard 1230 I,II scsi 511scsibus* at bzsc0 512bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 513scsibus* at bzivsc0 514bztzsc0 at zbus0 # Blizzard 2060 scsi 515scsibus* at bztzsc0 516cbsc0 at zbus0 # CyberSCSI I 517scsibus* at cbsc0 518cbiisc0 at zbus0 # CyberSCSI II 519scsibus* at cbiisc0 520cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 521scsibus* at cbiiisc0 522empsc0 at zbus0 # Emplant scsi 523scsibus* at empsc0 524 525wdc0 at mainbus0 # A4000 & A1200 IDE bus 526atabus* at wdc? channel ? # ATA bus 527wd* at atabus? drive ? # + drives 528atapibus* at atabus? # ATAPI bus 529cd* at atapibus? drive ? # ATAPI CD-ROM drives 530sd* at atapibus? drive ? # ATAPI disk drives 531 532pccard0 at mainbus0 533pcmcia* at pccard0 534com* at pcmcia? function ? # Modems and serial cards 535pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 536aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 537wdc* at pcmcia? function ? 538awi* at pcmcia? function ? # BayStack 650 (802.11FH) 539ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 540mbe* at pcmcia? function ? # MB8696x based Ethernet 541ne* at pcmcia? function ? # NE2000-compatible Ethernet 542sm* at pcmcia? function ? # Megahertz Ethernet 543mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 544com* at mhzc? 545sm* at mhzc? 546 547')m4_dnl 548 549m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 550drsc0 at mainbus0 # DraCo scsi 551scsibus* at drsc0 552')m4_dnl 553 554 555# each hard drive from low target to high 556# will configure to the next available sd unit number 557sd* at scsibus? target ? lun ? # scsi disks 558st* at scsibus? target ? lun ? # scsi tapes 559cd* at scsibus? target ? lun ? # scsi cds 560ch* at scsibus? target ? lun ? # scsi autochangers 561m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 562ss* at scsibus? target ? lun ? # scsi scanner 563uk* at scsibus? target ? lun ? # scsi unknown 564')m4_dnl 565 566pseudo-device loop # loopback network interface 567pseudo-device sl 1 # SLIP network interfaces 568pseudo-device ppp 1 # PPP network interfaces 569pseudo-device pppoe # PPP over Ethernet (RFC 2516) 570pseudo-device tun 1 # network tunnel line discipline 571pseudo-device tap # virtual Ethernet 572#pseudo-device gre 2 # generic L3 over IP tunnel 573pseudo-device bpfilter 16 # Berkeley packet filter 574pseudo-device ipfilter # IP Filter package 575pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 576#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 577#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 578pseudo-device vlan # IEEE 802.1q encapsulation 579pseudo-device bridge # simple inter-network bridging 580#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 581#pseudo-device pf # PF packet filter 582#pseudo-device pflog # PF log if 583 584pseudo-device view 4 # views (needed for grfcc) 585m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 586pseudo-device pty 2 # pseudo-terminals 587', `m4_dnl 588pseudo-device pty # pseudo-terminals 589')m4_dnl 590pseudo-device clockctl # user control of clock subsystem 591 592m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 593pseudo-device wsfont # wsfont(4) dynamic font loading support 594', `m4_dnl 595#pseudo-device wsfont # wsfont(4) dynamic font loading support 596')m4_dnl 597 598pseudo-device vnd 4 # vnode pseudo-disks 599pseudo-device ccd 4 # concatenated disk devices 600#pseudo-device cgd 4 # cryptographic disk devices 601pseudo-device raid 8 # RAIDframe disk driver 602options RAID_AUTOCONFIG # auto-configuration of RAID components 603# Options to enable various other RAIDframe RAID types. 604# options RF_INCLUDE_EVENODD=1 605# options RF_INCLUDE_RAID5_RS=1 606# options RF_INCLUDE_PARITYLOGGING=1 607# options RF_INCLUDE_CHAINDECLUSTER=1 608# options RF_INCLUDE_INTERDECLUSTER=1 609# options RF_INCLUDE_PARITY_DECLUSTERING=1 610# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 611 612pseudo-device rnd # /dev/random and in-kernel generator 613#options RND_COM # use "com" randomness as well (BROKEN) 614 615m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 616pseudo-device ksyms # /dev/ksyms (kernel symbols) 617')m4_dnl 618 619config netbsd root on ? type ? 620