GENERIC.in revision 1.51
1# $NetBSD: GENERIC.in,v 1.51 2006/02/05 05:01:49 cube Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21m4_divert(-1) 22# 23# GENERIC Amiga or DraCo 24# 25# This configuration file contains all possible options 26# 27# make AMIGA extracts the AMIGA configuration file. 28# make DRACO extracts the DRACO configuration file. 29# make GENERIC extracts the GENERIC configuration file. 30# make INSTALL extracts the INSTALL configuration file. 31# make WSCONS extracts the WSCONS configuration file. 32# 33# commit them, too. 34# 35 36# Define XXX_CONFIGURATION 37# 38m4_define(M4_Target`_CONFIGURATION', `') 39 40# If not building AMIGA, set DRACO_CONFIGURATION 41# 42m4_ifelse(M4_Target, `AMIGA', `', `m4_define(`DRACO_CONFIGURATION', `')') 43 44# If not building DRACO, set AMIGA_CONFIGURATION 45# 46m4_ifelse(M4_Target, `DRACO', `', `m4_define(`AMIGA_CONFIGURATION', `')') 47 48# If building WSCONS, uncomment various options 49# 50m4_ifdef(`WSCONS_CONFIGURATION', `m4_define(`WSOFF', `wson')', `m4_define(`WSOFF', `wsoff')') 51 52 53m4_divert(0)m4_dnl 54 55include "arch/amiga/conf/std.amiga" 56 57options INCLUDE_CONFIG_FILE # embed config file in kernel binary 58 59#ident "GENERIC-$Revision: 1.51 $" 60 61m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 62makeoptions COPTS="-Os" 63')m4_dnl 64 65maxusers 8 66options RTC_OFFSET=0 67 68# 69# mainboards to support (in addition to Amiga) 70# 71m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 72options DRACO 73')m4_dnl 74m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 75options BB060STUPIDROM # You need this, if you have a non-DraCo 76 # MC68060 with an OS ROM up to (at least) 77 # V40 (OS3.1) and want to boot with the 78 # bootblock. 79 # You do not need this if you have a DraCo, 80 # have no 68060 or NEVER use the bootblock 81options P5PPC68KBOARD # Phase5 PPC/68K board support 82')m4_dnl 83# 84# processors this kernel should support 85# 86options M68060 # support for 060 87options M060SP # MC68060 software support (Required for 060) 88m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 89options M68040 # support for 040 90options FPSP # MC68040 floating point support 91options M68030 # support for 030 92options M68020 # support for 020/851 93options FPU_EMULATE # FPU emulation 94')m4_dnl 95 96# 97# Networking options 98# 99options INET # IP networking support (Required) 100options INET6 # IPV6 101#options IPSEC # IP security 102#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 103#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 104#options IPSEC_DEBUG # debug for IP security 105#options GATEWAY # Packet forwarding 106#options DIRECTED_BROADCAST # Broadcast across subnets 107 108m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 109#options MROUTING # Multicast routing 110#options PIM # Protocol Independent Multicast 111options NS # XNS 112#options NSIP # XNS tunneling over IP 113options ISO,TPIP # OSI 114#options EON # OSI tunneling over IP 115options CCITT,LLC,HDLC # X.25 116options NETATALK # AppleTalk networking protocols 117#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 118')m4_dnl 119 120options PPP_BSDCOMP # BSD-Compress compression support for PPP 121options PPP_DEFLATE # Deflate compression support for PPP 122options PPP_FILTER # Active filter support for PPP (requires bpf) 123options PFIL_HOOKS # pfil(9) packet filter hooks 124options IPFILTER_LOG # ipmon(8) log support 125#options IPFILTER_DEFAULT_BLOCK # block all packets by default 126 127#options ALTQ # Manipulate network interfaces' output queues 128#options ALTQ_BLUE # Stochastic Fair Blue 129#options ALTQ_CBQ # Class-Based Queueing 130#options ALTQ_CDNR # Diffserv Traffic Conditioner 131#options ALTQ_FIFOQ # First-In First-Out Queue 132#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 133#options ALTQ_HFSC # Hierarchical Fair Service Curve 134#options ALTQ_LOCALQ # Local queueing discipline 135#options ALTQ_PRIQ # Priority Queueing 136#options ALTQ_RED # Random Early Detection 137#options ALTQ_RIO # RED with IN/OUT 138#options ALTQ_WFQ # Weighted Fair Queueing 139 140# Filesystems 141file-system FFS # Berkeley fast file system 142file-system EXT2FS # second extended file system (linux) 143#file-system LFS # log-structured filesystem (experimental) 144 145m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 146file-system MFS # Memory based filesystem 147')m4_dnl 148 149file-system NFS # Network File System client side code 150file-system ADOSFS # AmigaDOS file system 151file-system CD9660 # ISO 9660 + Rock Ridge filesystem 152file-system MSDOSFS # MS-DOS filesystem 153 154file-system KERNFS # kernel data-structure filesystem 155 156m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 157file-system FDESC # user file descriptor filesystem 158file-system NULLFS # loopback filesystem 159file-system OVERLAY # overlay filesystem 160#file-system PORTAL # Portal filesystem 161file-system PROCFS # /proc filesystem 162file-system UMAPFS # NULLFS + uid and gid remapping 163file-system UNION # union filesystem 164file-system SMBFS # experimental - CIFS; also needs nsmb (below) 165file-system PTYFS # /dev/pts/N support 166#file-system TMPFS # experimental - Efficient memory file-system 167#file-system UDF # experimental - OSTA UDF CD/DVD file-system 168')m4_dnl 169 170# Filesystem options 171 172#options FFS_EI # FFS Endian Independant support 173 174m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 175options QUOTA # User and group quotas in FFS 176options SOFTDEP # FFS soft updates support. 177#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 178options NFSSERVER # Network File System server side code 179#options FFS_NO_SNAPSHOT # No FFS snapshot support 180')m4_dnl 181 182#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 183 # immutable) behave as system flags. 184 185# 186# Compatibility options for various existing systems 187# 188 189m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 190#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 191options COMPAT_43 # compatibility with 4.3BSD interfaces 192options COMPAT_09 # compatibility with NetBSD 0.9 193options COMPAT_10 # compatibility with NetBSD 1.0 194options COMPAT_12 # compatibility with NetBSD 1.2 195options COMPAT_13 # compatibility with NetBSD 1.3 196options COMPAT_14 # compatibility with NetBSD 1.4 197options COMPAT_15 # compatibility with NetBSD 1.5 198options COMPAT_16 # compatibility with NetBSD 1.6 199options COMPAT_20 # compatibility with NetBSD 2.0 200options COMPAT_30 # NetBSD 3.0 compatibility. 201options COMPAT_SUNOS # Support to run Sun (m68k) executables 202options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 203options COMPAT_NOMID # allow nonvalid machine id executables 204#options COMPAT_LINUX # Support to run Linux/m68k executables 205')m4_dnl 206 207options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 208options COMPAT_AOUT_M68K # actually make some system calls work. 209options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 210 211m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 212# 213# Support for System V IPC facilities. 214# 215options SYSVSHM # System V-like shared memory 216options SYSVMSG # System V-like messages 217options SYSVSEM # System V-like semaphores 218#options SEMMNI=10 # number of semaphore identifiers 219#options SEMMNS=60 # number of semaphores in system 220#options SEMUME=10 # max number of undo entries per process 221#options SEMMNU=30 # number of undo structures in system 222options P1003_1B_SEMAPHORE # p1003.1b semaphore support 223')m4_dnl 224 225# 226# Support for various kernel options 227# 228 229m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 230options KTRACE # system call tracing support 231options SYSTRACE # system call vetting via systrace(1) 232options LKM # Loadable kernel modules 233')m4_dnl 234#options INSECURE # disable kernel security levels 235options SCSIVERBOSE # human readable SCSI error messages 236options USERCONF # userconf(4) support 237m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 238options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 239options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 240options MALLOC_NOINLINE # Not inlining MALLOC saves memory 241', `m4_dnl 242options NTP # NTP phase/frequency locked loop 243#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 244')m4_dnl 245 246# Enable experimental buffer queue strategy for better responsiveness under 247# high disk I/O load. Use it with caution - it's not proven to be stable yet. 248#options BUFQ_READPRIO 249#options BUFQ_PRIOCSCAN 250 251# 252# Misc. debugging options 253# 254options DDB # Kernel debugger 255#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 256#options DIAGNOSTIC # Extra kernel sanity checks 257#options DEBUG # Enable misc. kernel debugging code 258#options SYSCALL_DEBUG # debug all syscalls. 259#options SCSIDEBUG # Add SCSI debugging statements 260#options PANICBUTTON # Forced crash via keypress (?) 261 262# 263# Amiga specific options 264# 265#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 266 # first bank of RAM. (default: unlimited) 267#options NKPTADD=4 # set this for 4 additional KPT pages 268#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 269 # per 16 MB (1<<24 bytes) of RAM 270 # uncomment and decrease this, or uncomment and 271 # increase NKPTADD if you get "out of PT pages" 272 # panics. 273 274# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 275# before the 10 secondinterval ends, or that KBDRESET does work at all. 276#options KBDRESET # sync on Ctrl-Amiga-Amiga 277 278# These options improve performance with the built-in serial port 279# on slower Amigas. Try the larger buffers first then lev6_defer. 280#options SERIBUF_SIZE=4096 281#options SEROBUF_SIZE=32 282#options LEV6_DEFER # defers l6 to l4 (below serial l5) 283 284m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 285#options DEVRELOAD # implement /dev/reload 286# # currently only works for a.out kernels 287')m4_dnl 288 289options RETINACONSOLE # enable code to allow retina to be console 290m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 291options ULOWELLCONSOLE # enable code to allow a2410 to be console 292options CL5426CONSOLE # Cirrus console 293options CV64CONSOLE # CyberVision console 294options TSENGCONSOLE # Tseng console 295options CV3DCONSOLE # CyberVision 64/3D console 296 297options GRF_ECS # Enhanced Chip Set 298options GRF_NTSC # NTSC 299options GRF_PAL # PAL 300options GRF_A2024 # Support for the A2024 301options GRF_AGA # AGA Chip Set 302options GRF_AGA_VGA # AGA VGAONLY timing 303options GRF_SUPER72 # AGA Super-72 304')m4_dnl 305#options KFONT_8X11 # 8x11 font 306 307# select a font for the console according to the character set and keymap 308# you want to use 309options KFONT_CONS_ISO8859_1 310#options KFONT_CONS_ISO8859_2 311 312# This is how you would tell the kernel the A2410 oscillator frequencies: 313# The used frequencies are the defaults, and do not need option setting 314#options ULOWELL_OSC1=36000000 315#options ULOWELL_OSC2=66667000 316 317# This is how you specify the blitting speed, higher values may speed up blits 318# a littel bit. If you raise this value too much some trash may appear. 319# the commented version is the default. 320#options RH_MEMCLK=61000000 321# this option enables the 64 bit sprite which does not work 322# for quite a few people. E.g. The cursor sprite will turn to a block 323# when moved to the top of the screen in X. 324#options RH_64BIT_SPRITE 325# enables fast scroll code appears to now work on 040 systems. 326#options RETINA_SPEED_HACK 327# enables the Hardwarecursor which does not work on some systems. 328#options RH_HARDWARECURSOR 329 330m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 331# wscons aware interface to amiga custom chips. 332# If you enable it enable also wskbd. 333# 334m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 335amidisplaycc0 at mainbus0 # wscons interface to custom chips 336wsdisplay0 at amidisplaycc0 console ? 337options WSEMUL_VT100 338options FONT_VT220L8x10 339options FONT_VT220ISO8x16 340', ` 341#amidisplaycc0 at mainbus0 # wscons interface to custom chips 342#wsdisplay0 at amidisplaycc0 console ? 343#options WSEMUL_VT100 344#options FONT_VT220L8x10 345#options FONT_VT220ISO8x16 346')m4_dnl 347')m4_dnl 348 349m4_ifdef(`WSCONS_CONFIGURATION', `', `m4_dnl 350m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 351grfcc0 at mainbus0 # custom chips 352grfrt0 at zbus0 # retina II 353')m4_dnl 354grfrh0 at zbus0 # retina III 355m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 356grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 357grful0 at zbus0 # A2410 358grfcv0 at zbus0 # CyberVision 64 359grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 360grfcv3d0 at zbus0 # CyberVision 64/3D 361')m4_dnl 362 363m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 364grf0 at grfcc0 365grf1 at grfrt0 366')m4_dnl 367grf2 at grfrh0 368m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 369grf3 at grfcl? 370grf4 at grful0 371grf5 at grfcv0 372grf6 at grfet? 373grf7 at grfcv3d0 374ite0 at grf0 # terminal emulators for grfs 375ite1 at grf1 # terminal emulators for grfs 376')m4_dnl 377ite2 at grf2 # terminal emulators for grfs 378m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 379ite3 at grf3 # terminal emulators for grfs 380ite4 at grf4 # terminal emulators for grfs 381ite5 at grf5 # terminal emulators for grfs 382ite6 at grf6 # terminal emulators for grfs 383ite7 at grf7 # terminal emulators for grfs 384')m4_dnl 385')m4_dnl 386 387msc0 at zbus0 # A2232 MSC multiport serial. 388mfc0 at zbus0 # MultiFaceCard I/O board 389mfcs0 at mfc0 unit 0 # MFC serial 390mfcs1 at mfc0 unit 1 # MFC serial 391#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 392#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 393#mfcs2 at mfc1 unit 0 394#mfcs3 at mfc1 unit 1 395#mfcp1 at mfc1 unit 0 396 397hyper* at zbus? # zbus HyperCom3/3+/4/4+ 398#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 399com* at hyper? port ? # Hypercom3/4 serial ports 400lpt* at hyper? port ? # Hypercom3+/4+ parallel port 401 402#options IOBZCLOCK=22118400 # default, uncomment the next line 403#options IOBZCLOCK=24000000 # if needed. 404 405iobl* at zbus? # zbus IOBlix 406com* at iobl? port ? # IOBlix serial ports 407lpt* at iobl? port ? # IOBlix parallel ports 408 409 410# 411# Keyboard device. Optionally can attach a wskbd. 412# wskbd works together with a wsdisplay so enable them both if you will. 413# Don't enable wskbd if you use ite. 414# 415# XXX in std.amiga: kbd0 at mainbus0 416m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 417wskbd0 at kbd0 console ? 418', ` 419#wskbd0 at kbd0 console ? 420')m4_dnl 421 422 423m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 424# 425# Amiga Mainboard devices (sans graphics and keyboard) 426# 427 428ser0 at mainbus0 # Amiga onboard serial 429par0 at mainbus0 # Amiga onboard parallel 430ms* at mainbus0 # Amiga mice 431fdc0 at mainbus0 # Amiga FDC 432fd* at fdc0 unit ? # floppy disks on the later 433a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 434a2kbbc0 at mainbus0 # A2000 battery backed clock 435m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 436aucc* at mainbus0 # Amiga CC audio 437audio* at aucc? 438')m4_dnl 439')m4_dnl 440 441m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 442wsmouse* at ms? 443', ` 444#wsmouse* at ms? 445')m4_dnl 446 447m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 448# 449# DraCo Mainboard devices (sans keyboard) 450# 451 452drbbc0 at mainbus0 # DraCo battery backed clock 453drsupio0 at mainbus0 # DraCo superio chip 454com* at drsupio? port ? # DraCo serial 455lpt0 at drsupio? port ? # DraCo parallel 456')m4_dnl 457 458# 459# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 460# 461 462m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 463m4_ifdef(`DRACO_CONFIGURATION', `', `m4_dnl 464# Alas, Melody-Z2 dont configure in the DraCo bus. 465melody* at zbus0 # Melody MPEG audio decoder 466audio* at melody? 467')m4_dnl 468 469repulse* at zbus0 # ALiENDESiGN Repulse 470audio* at repulse? 471 472toccata* at zbus0 # MacroSystem GmbH Toccata 473audio* at toccata? 474')m4_dnl 475 476# Ethernet cards: 477le* at zbus0 # A2065, Ameristar, Ariadne 478ne* at zbus0 # AriadneII, X-surf 479ed* at zbus0 # Hydra, ASDG LanRover 480es* at zbus0 # CEI A4066 EthernetPLUS 481qn* at zbus0 # Quicknet 482 483# Arcnet 484bah* at zbus0 # C=/Ameristar A2060 / 560 485 486m4_ifdef(`AMIGA_CONFIGURATION', `m4_dnl 487# Greater Valley Product Bus 488gvpbus* at zbus0 489 490# scsi stuff, all possible 491gtsc0 at gvpbus? # GVP series II scsi 492scsibus* at gtsc0 493ahsc0 at mainbus0 # A3000 scsi 494scsibus* at ahsc0 495atzsc0 at zbus0 # A2091 scsi 496scsibus* at atzsc0 497wstsc0 at zbus0 # Wordsync II scsi 498scsibus* at wstsc0 499ivsc0 at zbus0 # IVS scsi 500scsibus* at ivsc0 501mlhsc0 at zbus0 # Hacker scsi 502scsibus* at mlhsc0 503otgsc0 at zbus0 # 12 gauge scsi 504scsibus* at otgsc0 505zssc0 at zbus0 # Zeus scsi 506scsibus* at zssc0 507mgnsc0 at zbus0 # Magnum scsi 508scsibus* at mgnsc0 509wesc0 at zbus0 # Warp Engine scsi 510scsibus* at wesc0 511afsc0 at zbus0 # A4091 scsi 512scsibus* at afsc0 513aftsc0 at mainbus0 # A4000T scsi 514scsibus* at aftsc0 515flsc0 at zbus0 # FastlaneZ3 scsi 516scsibus* at flsc0 517bzsc0 at zbus0 # Blizzard 1230 I,II scsi 518scsibus* at bzsc0 519bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 520scsibus* at bzivsc0 521bztzsc0 at zbus0 # Blizzard 2060 scsi 522scsibus* at bztzsc0 523cbsc0 at zbus0 # CyberSCSI I 524scsibus* at cbsc0 525cbiisc0 at zbus0 # CyberSCSI II 526scsibus* at cbiisc0 527cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 528scsibus* at cbiiisc0 529empsc0 at zbus0 # Emplant scsi 530scsibus* at empsc0 531 532wdc0 at mainbus0 # A4000 & A1200 IDE bus 533atabus* at wdc? channel ? # ATA bus 534wd* at atabus? drive ? # + drives 535atapibus* at atabus? # ATAPI bus 536cd* at atapibus? drive ? # ATAPI CD-ROM drives 537sd* at atapibus? drive ? # ATAPI disk drives 538 539pccard0 at mainbus0 540pcmcia* at pccard0 541com* at pcmcia? function ? # Modems and serial cards 542pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 543aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 544wdc* at pcmcia? function ? 545awi* at pcmcia? function ? # BayStack 650 (802.11FH) 546ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 547mbe* at pcmcia? function ? # MB8696x based Ethernet 548ne* at pcmcia? function ? # NE2000-compatible Ethernet 549sm* at pcmcia? function ? # Megahertz Ethernet 550mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 551com* at mhzc? 552sm* at mhzc? 553 554')m4_dnl 555 556m4_ifdef(`DRACO_CONFIGURATION', `m4_dnl 557drsc0 at mainbus0 # DraCo scsi 558scsibus* at drsc0 559')m4_dnl 560 561 562# each hard drive from low target to high 563# will configure to the next available sd unit number 564sd* at scsibus? target ? lun ? # scsi disks 565st* at scsibus? target ? lun ? # scsi tapes 566cd* at scsibus? target ? lun ? # scsi cds 567ch* at scsibus? target ? lun ? # scsi autochangers 568m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 569ss* at scsibus? target ? lun ? # scsi scanner 570uk* at scsibus? target ? lun ? # scsi unknown 571')m4_dnl 572 573pseudo-device loop # loopback network interface 574pseudo-device sl # SLIP network interfaces 575pseudo-device ppp # PPP network interfaces 576pseudo-device pppoe # PPP over Ethernet (RFC 2516) 577pseudo-device tun # network tunnel line discipline 578pseudo-device tap # virtual Ethernet 579#pseudo-device gre # generic L3 over IP tunnel 580pseudo-device bpfilter # Berkeley packet filter 581pseudo-device ipfilter # IP Filter package 582pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 583#pseudo-device faith # IPv[46] tcp relay translation i/f 584#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 585pseudo-device vlan # IEEE 802.1q encapsulation 586pseudo-device bridge # simple inter-network bridging 587#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 588#pseudo-device pf # PF packet filter 589#pseudo-device pflog # PF log if 590m4_ifdef(`GENERIC_CONFIGURATION', `m4_dnl 591pseudo-device fss 4 # file system snapshot device 592', `m4_dnl 593#pseudo-device fss 4 # file system snapshot device 594')m4_dnl 595 596pseudo-device view 4 # views (needed for grfcc) 597m4_ifdef(`INSTALL_CONFIGURATION', `m4_dnl 598pseudo-device pty 2 # pseudo-terminals 599', `m4_dnl 600pseudo-device pty # pseudo-terminals 601')m4_dnl 602pseudo-device clockctl # user control of clock subsystem 603 604m4_ifdef(`WSCONS_CONFIGURATION', `m4_dnl 605pseudo-device wsfont # wsfont(4) dynamic font loading support 606pseudo-device wsmux # mouse & keyboard multiplexor 607', `m4_dnl 608#pseudo-device wsfont # wsfont(4) dynamic font loading support 609#pseudo-device wsmux # mouse & keyboard multiplexor 610')m4_dnl 611 612pseudo-device vnd # vnode pseudo-disks 613#options VND_COMPRESSION # compressed vnd(4) 614pseudo-device ccd 4 # concatenated disk devices 615#pseudo-device cgd 4 # cryptographic disk devices 616pseudo-device raid 8 # RAIDframe disk driver 617options RAID_AUTOCONFIG # auto-configuration of RAID components 618# Options to enable various other RAIDframe RAID types. 619# options RF_INCLUDE_EVENODD=1 620# options RF_INCLUDE_RAID5_RS=1 621# options RF_INCLUDE_PARITYLOGGING=1 622# options RF_INCLUDE_CHAINDECLUSTER=1 623# options RF_INCLUDE_INTERDECLUSTER=1 624# options RF_INCLUDE_PARITY_DECLUSTERING=1 625# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 626 627pseudo-device rnd # /dev/random and in-kernel generator 628#options RND_COM # use "com" randomness as well (BROKEN) 629 630m4_ifdef(`INSTALL_CONFIGURATION', `', `m4_dnl 631pseudo-device ksyms # /dev/ksyms (kernel symbols) 632pseudo-device nsmb # experimental - SMB requester 633')m4_dnl 634 635# Veriexec 636#options VERIFIED_EXEC 637# 638# a pseudo device needed for veriexec 639#pseudo-device veriexec 1 640# 641# Uncomment the fingerprint methods below that are desired. Note that 642# removing fingerprint methods will have almost no impact on the kernel 643# code size. 644# 645#options VERIFIED_EXEC_FP_RMD160 646#options VERIFIED_EXEC_FP_SHA256 647#options VERIFIED_EXEC_FP_SHA384 648#options VERIFIED_EXEC_FP_SHA512 649#options VERIFIED_EXEC_FP_SHA1 650#options VERIFIED_EXEC_FP_MD5 651 652config netbsd root on ? type ? 653