Home | History | Annotate | Line # | Download | only in conf
INSTALL revision 1.111
      1 # $NetBSD: INSTALL,v 1.111 2012/11/19 22:40:24 rkujawa Exp $
      2 #
      3 # This file was automatically created.
      4 # Changes will be lost when make is run in this directory.
      5 #
      6 # Created from: # NetBSD: GENERIC.in,v 1.105 2012/11/19 22:39:47 rkujawa Exp $
      7 #
      8 ##
      9 # GENERIC machine description file
     10 #
     11 # This machine description file is used to generate the default NetBSD
     12 # kernel.  The generic kernel does not include all options, subsystems
     13 # and device drivers, but should be useful for most applications.
     14 #
     15 # The machine description file can be customised for your specific
     16 # machine to reduce the kernel size and improve its performance.
     17 #
     18 # For further information on compiling NetBSD kernels, see the config(8)
     19 # man page.
     20 #
     21 # For further information on hardware support for this architecture, see
     22 # the intro(4) man page.  For further information about kernel options
     23 # for this architecture, see the options(4) man page.  For an explanation
     24 # of each device driver in this file see the section 4 man page for the
     25 # device.
     26 
     27 
     28 include "arch/amiga/conf/std.amiga"
     29 
     30 options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     31 
     32 #ident 		"GENERIC-$Revision: 1.111 $"
     33 
     34 makeoptions	COPTS="-Os"
     35 
     36 maxusers	8
     37 options 	RTC_OFFSET=0
     38 
     39 #
     40 # mainboards to support (in addition to Amiga)
     41 #
     42 options 	DRACO
     43 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     44 				# MC68060 with an OS ROM up to (at least)
     45 				# V40 (OS3.1) and want to boot with the
     46 				# bootblock.
     47 				# You do not need this if you have a DraCo,
     48 				# have no 68060 or NEVER use the bootblock
     49 options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
     50 #
     51 # processors this kernel should support
     52 #
     53 options 	M68060		# support for 060
     54 options 	M060SP		# MC68060 software support (Required for 060)
     55 options 	M68040		# support for 040
     56 options 	FPSP		# MC68040 floating point support
     57 options 	M68030		# support for 030
     58 options 	M68020		# support for 020/851
     59 options 	FPU_EMULATE	# FPU emulation
     60 
     61 #
     62 # Networking options
     63 #
     64 options 	INET		# IP networking support (Required)
     65 options 	INET6		# IPV6
     66 #options 	IPSEC		# IP security
     67 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
     68 #options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
     69 #options 	IPSEC_DEBUG	# debug for IP security
     70 #options 	GATEWAY		# Packet forwarding
     71 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
     72 
     73 
     74 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     75 options 	PPP_DEFLATE	# Deflate compression support for PPP
     76 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     77 options 	PFIL_HOOKS	# pfil(9) packet filter hooks
     78 options 	IPFILTER_LOG	# ipmon(8) log support
     79 options 	IPFILTER_LOOKUP	# ippool(8) support
     80 options 	IPFILTER_COMPAT # Compat for IP-Filter
     81 #options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
     82 
     83 #options 	ALTQ		# Manipulate network interfaces' output queues
     84 #options 	ALTQ_BLUE	# Stochastic Fair Blue
     85 #options 	ALTQ_CBQ	# Class-Based Queueing
     86 #options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
     87 #options 	ALTQ_FIFOQ	# First-In First-Out Queue
     88 #options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
     89 #options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
     90 #options 	ALTQ_LOCALQ	# Local queueing discipline
     91 #options 	ALTQ_PRIQ	# Priority Queueing
     92 #options 	ALTQ_RED	# Random Early Detection
     93 #options 	ALTQ_RIO	# RED with IN/OUT
     94 #options 	ALTQ_WFQ	# Weighted Fair Queueing
     95 
     96 # Filesystems
     97 file-system 	FFS		# Berkeley fast file system
     98 file-system 	EXT2FS		# second extended file system (linux)
     99 #file-system 	LFS		# log-structured filesystem (experimental)
    100 
    101 
    102 file-system 	NFS		# Network File System client side code
    103 file-system 	ADOSFS		# AmigaDOS file system
    104 file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
    105 file-system 	MSDOSFS		# MS-DOS filesystem
    106 
    107 file-system 	KERNFS		# kernel data-structure filesystem
    108 
    109 
    110 # Filesystem options
    111 
    112 #options 	FFS_EI		# FFS Endian Independent support
    113 options 	WAPBL		# File system journaling support
    114 
    115 
    116 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    117 				# immutable) behave as system flags.
    118 
    119 #
    120 # Compatibility options for various existing systems
    121 #
    122 
    123 
    124 options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
    125 options 	COMPAT_AOUT_M68K # actually make some system calls work.
    126 options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
    127 
    128 
    129 #
    130 # Support for various kernel options
    131 #
    132 
    133 #options 	INSECURE	# disable kernel security levels
    134 options 	SCSIVERBOSE	# human readable SCSI error messages
    135 options 	USERCONF	# userconf(4) support
    136 options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
    137 options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
    138 
    139 # Enable experimental buffer queue strategy for better responsiveness under 
    140 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
    141 #options 	BUFQ_READPRIO
    142 #options 	BUFQ_PRIOCSCAN
    143 
    144 #
    145 # Misc. debugging options
    146 #
    147 options 	DDB		# Kernel debugger
    148 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    149 #options 	DIAGNOSTIC	# Extra kernel sanity checks
    150 #options 	DEBUG		# Enable misc. kernel debugging code
    151 #options 	SYSCALL_DEBUG	# debug all syscalls.
    152 #options 	SCSIDEBUG	# Add SCSI debugging statements
    153 #options 	PANICBUTTON	# Forced crash via keypress (?)
    154 
    155 #
    156 # Amiga specific options
    157 #
    158 #options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
    159 				# first bank of RAM. (default: unlimited)
    160 #options 	NKPTADD=4	# set this for 4 additional KPT pages
    161 #options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
    162 				# per 16 MB (1<<24 bytes) of RAM
    163 				# uncomment and decrease this, or uncomment and
    164 				# increase NKPTADD if you get "out of PT pages"
    165 				# panics.
    166 
    167 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
    168 # before the 10 secondinterval ends, or that KBDRESET does work at all.
    169 #options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
    170 
    171 # These options improve performance with the built-in serial port
    172 # on slower Amigas.  Try the larger buffers first then lev6_defer.
    173 #options 	SERIBUF_SIZE=4096
    174 #options 	SEROBUF_SIZE=32
    175 #options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
    176 
    177 #options	DEVRELOAD	# implement /dev/reload
    178 #				# currently only works for a.out kernels
    179 
    180 options 	RETINACONSOLE	# enable code to allow retina to be console
    181 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    182 options 	CL5426CONSOLE	# Cirrus console
    183 options 	CV64CONSOLE	# CyberVision console
    184 options 	TSENGCONSOLE	# Tseng console
    185 options 	CV3DCONSOLE	# CyberVision 64/3D console
    186 
    187 options 	GRF_ECS		# Enhanced Chip Set
    188 options 	GRF_NTSC	# NTSC
    189 options 	GRF_PAL		# PAL
    190 options 	GRF_A2024	# Support for the A2024
    191 options 	GRF_AGA		# AGA Chip Set
    192 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    193 options 	GRF_SUPER72	# AGA Super-72
    194 #options 	KFONT_8X11	# 8x11 font
    195 
    196 # select a font for the console according to the character set and keymap
    197 # you want to use
    198 options        KFONT_CONS_ISO8859_1
    199 #options         KFONT_CONS_ISO8859_2
    200 
    201 # This is how you would tell the kernel the A2410 oscillator frequencies:
    202 # The used frequencies are the defaults, and do not need option setting
    203 #options 	ULOWELL_OSC1=36000000
    204 #options 	ULOWELL_OSC2=66667000
    205 
    206 # This is how you specify the blitting speed, higher values may speed up blits
    207 # a littel bit.  If you raise this value too much some trash may appear.
    208 # the commented version is the default.
    209 #options 	RH_MEMCLK=61000000
    210 # this option enables the 64 bit sprite which does not work
    211 # for quite a few people.  E.g. The cursor sprite will turn to a block
    212 # when moved to the top of the screen in X.
    213 #options 	RH_64BIT_SPRITE
    214 # enables fast scroll code appears to now work on 040 systems.
    215 #options 	RETINA_SPEED_HACK
    216 # enables the Hardwarecursor which does not work on some systems.
    217 #options 	RH_HARDWARECURSOR
    218 
    219 # wscons aware interface to amiga custom chips.
    220 # If you enable it enable also wskbd.
    221 #
    222 #amidisplaycc0	at mainbus0		# wscons interface to custom chips
    223 #wsdisplay0	at amidisplaycc0 console ?
    224 #options 	WSEMUL_VT100
    225 #options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
    226 #options 	FONT_VT220L8x10
    227 #options	FONT_VT220ISO8x16
    228 
    229 p5bus0		at zbus0		# Phase5 CSPPC/BPPC internal bus
    230 
    231 grfcc0		at mainbus0		# custom chips
    232 grfrt0		at zbus0		# retina II
    233 grfrh0		at zbus0		# retina III
    234 grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
    235 grful0		at zbus0		# A2410
    236 grfcv0		at zbus0		# CyberVision 64
    237 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    238 grfcv3d0	at zbus0		# CyberVision 64/3D
    239 
    240 grf0		at grfcc0
    241 grf1		at grfrt0
    242 grf2		at grfrh0
    243 grf3		at grfcl?
    244 grf4		at grful0
    245 grf5		at grfcv0
    246 grf6		at grfet?
    247 grf7		at grfcv3d0
    248 ite0		at grf0			# terminal emulators for grfs
    249 ite1		at grf1			# terminal emulators for grfs
    250 ite2		at grf2			# terminal emulators for grfs
    251 ite3		at grf3			# terminal emulators for grfs
    252 ite4		at grf4			# terminal emulators for grfs
    253 ite5		at grf5			# terminal emulators for grfs
    254 ite6		at grf6			# terminal emulators for grfs
    255 ite7		at grf7			# terminal emulators for grfs
    256 
    257 #wsdisplay*	at grf5 console ?	# wsdisplay on top of grf (CV64)
    258 #wsdisplay*	at grf7 console ?	# wsdisplay on top of grf (CV64/3D)
    259 
    260 msc0		at zbus0		# A2232 MSC multiport serial.
    261 mfc0		at zbus0		# MultiFaceCard I/O board
    262 mfcs0		at mfc0 unit 0		# MFC serial
    263 mfcs1		at mfc0 unit 1		# MFC serial
    264 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    265 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    266 #mfcs2		at mfc1 unit 0
    267 #mfcs3		at mfc1 unit 1
    268 #mfcp1		at mfc1 unit 0
    269 
    270 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    271 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    272 com*		at hyper? port ?	# Hypercom3/4 serial ports
    273 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    274 
    275 #options 	IOBZCLOCK=22118400 	# default, uncomment the next line
    276 #options 	IOBZCLOCK=24000000	# if needed.
    277 
    278 iobl*		at zbus?		# zbus IOBlix
    279 com*		at iobl? port ?		# IOBlix serial ports
    280 lpt*		at iobl? port ?		# IOBlix parallel ports
    281 
    282 
    283 #
    284 # Keyboard device. Optionally can attach a wskbd.
    285 # wskbd works together with a wsdisplay so enable them both if you will.
    286 # Don't enable wskbd if you use ite.
    287 #
    288 # XXX in std.amiga: kbd0 at mainbus0
    289 #wskbd0		at kbd0 console ?
    290 
    291 
    292 #
    293 # Amiga Mainboard devices (sans graphics and keyboard)
    294 #
    295 
    296 ser0		at mainbus0		# Amiga onboard serial
    297 par0		at mainbus0		# Amiga onboard parallel
    298 ms*		at mainbus0		# Amiga mice
    299 fdc0		at mainbus0		# Amiga FDC
    300 fd*		at fdc0 unit ?		# floppy disks on the later
    301 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    302 a2kbbc0 	at mainbus0		# A2000 battery backed clock
    303 
    304 #wsmouse*	at ms?
    305 
    306 #
    307 # DraCo Mainboard devices (sans keyboard)
    308 #
    309 
    310 drbbc0		at mainbus0		# DraCo battery backed clock
    311 drsupio0	at mainbus0		# DraCo superio chip
    312 com*		at drsupio? port ?	# DraCo serial
    313 lpt0		at drsupio? port ?	# DraCo parallel
    314 
    315 #
    316 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
    317 #
    318 
    319 
    320 # Ethernet cards:
    321 le*		at zbus0		# A2065, Ameristar, Ariadne
    322 ne*		at zbus0		# AriadneII
    323 ed*		at zbus0		# Hydra, ASDG LanRover
    324 es*		at zbus0		# CEI A4066 EthernetPLUS
    325 qn*		at zbus0		# Quicknet
    326 
    327 xsurf*		at zbus0		# X-Surf
    328 ne*		at xsurfbus?		# NE2000 chip on X-Surf
    329 gencp*		at xsurfbus?		# clockports on X-Surf
    330 #wdc*		at xsurfbus?		# IDE on X-Surf
    331 #options	WDC_NO_IDS
    332 clockport*	at gencp?
    333 
    334 # Arcnet
    335 bah*		at zbus0		# C=/Ameristar A2060 / 560
    336 
    337 # Greater Valley Product Bus
    338 gvpbus* 	at zbus0
    339 
    340 # scsi stuff, all possible
    341 gtsc0		at gvpbus?		# GVP series II scsi
    342 scsibus*	at gtsc0
    343 ahsc0		at mainbus0		# A3000 scsi
    344 scsibus*	at ahsc0
    345 atzsc0		at zbus0		# A2091 scsi
    346 scsibus*	at atzsc0
    347 wstsc0		at zbus0		# Wordsync II scsi
    348 scsibus*	at wstsc0
    349 ivsc0		at zbus0		# IVS scsi
    350 scsibus*	at ivsc0
    351 mlhsc0		at zbus0		# Hacker scsi
    352 scsibus*	at mlhsc0
    353 otgsc0		at zbus0		# 12 gauge scsi
    354 scsibus*	at otgsc0
    355 zssc0		at zbus0		# Zeus scsi
    356 scsibus*	at zssc0
    357 mgnsc0		at zbus0		# Magnum scsi
    358 scsibus*	at mgnsc0
    359 wesc0		at zbus0		# Warp Engine scsi
    360 scsibus*	at wesc0
    361 bppcsc0		at p5bus0		# BlizzardPPC 603e+ scsi
    362 scsibus*	at bppcsc0
    363 afsc0		at zbus0		# A4091 scsi
    364 scsibus*	at afsc0
    365 aftsc0		at mainbus0		# A4000T scsi
    366 scsibus*	at aftsc0
    367 flsc0		at zbus0		# FastlaneZ3 scsi
    368 scsibus*	at flsc0
    369 bzsc0		at zbus0		# Blizzard 1230 I,II scsi
    370 scsibus*	at bzsc0
    371 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
    372 scsibus*	at bzivsc0
    373 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    374 scsibus*	at bztzsc0
    375 cbsc0		at zbus0		# CyberSCSI I
    376 scsibus*	at cbsc0
    377 cbiisc0 	at zbus0		# CyberSCSI II
    378 scsibus*	at cbiisc0
    379 cbiiisc0 	at p5bus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    380 scsibus*	at cbiiisc0
    381 empsc0		at zbus0		# Emplant scsi
    382 scsibus*	at empsc0
    383 
    384 wdc0		at mainbus0		# A4000 & A1200 IDE bus
    385 wdc*		at zbus0		# Buddha / Catweasel
    386 #efa0		at mainbus0		# ELBOX FastATA 1200 Mk-III/Mk-IV 
    387 
    388 atabus* 	at wdc? channel ?	# ATA bus
    389 #atabus*	at efa? channel ?	# ATA bus 
    390 wd*		at atabus? drive ?	#  + drives
    391 atapibus*	at atabus?		# ATAPI bus
    392 cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    393 sd*		at atapibus? drive ?	# ATAPI disk drives
    394 
    395 pccard0		at mainbus0
    396 pcmcia*		at pccard0
    397 com*		at pcmcia? function ?		# Modems and serial cards
    398 pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
    399 aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
    400 wdc*		at pcmcia? function ?
    401 awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
    402 ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
    403 mbe*		at pcmcia? function ?		# MB8696x based Ethernet
    404 ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
    405 sm*		at pcmcia? function ?		# Megahertz Ethernet
    406 mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
    407 com*		at mhzc?
    408 sm*		at mhzc?
    409 
    410 
    411 drsc0		at mainbus0		# DraCo scsi
    412 scsibus*	at drsc0
    413 
    414 
    415 # each hard drive from low target to high
    416 # will configure to the next available sd unit number
    417 sd*	at scsibus? target ? lun ?	# scsi disks
    418 st*	at scsibus? target ? lun ?	# scsi tapes
    419 cd*	at scsibus? target ? lun ?	# scsi cds
    420 ch*	at scsibus? target ? lun ?	# scsi autochangers
    421 
    422 # PCI bus support
    423 options		PCIVERBOSE              # verbose PCI device autoconfig messages
    424 #options	PCI_CONFIG_DUMP
    425 options		PCI_NETBSD_CONFIGURE	# supported by mppb(4), p5pb(4), empb(4)
    426 
    427 p5pb0		at p5bus0		# Phase5 PCI bridge (CVPPC/BVPPC/G-REX)
    428 p5membar*	at zbus0		# Phase5 PCI bridge autoconfiguring BARs
    429 #options	P5PB_DEBUG		# enable excessive debug for p5pb
    430 #options	P5PB_CONSOLE		# console on CVPPC/BVPPC/Voodoo3
    431 pci*		at p5pb0
    432 
    433 mppb*           at zbus0		# Matay Prometheus Zorro-PCI bridge
    434 pci*            at mppb?
    435 
    436 empb0		at zbus0		# ELBOX Mediator PCI 1200
    437 emmem0		at zbus0		# ELBOX Mediator PCI memory space
    438 pci*		at empb0
    439 
    440 #cv3dpb*	at zbus0		# CyberVision 64/3D PCI bridge
    441 
    442 #genfb*		at pci?			# generic fb, CVPPC/BVPPC only
    443 #voodoofb*	at pci?			# 3Dfx Voodoo 3 in G-REX
    444 #radeonfb*	at pci?			# untested
    445 
    446 ne*             at pci?			# NE2000 Ethernet
    447 satalink* at pci? dev ? function ? flags 0x0002	# SiI SATALink 3112 
    448 
    449 # Bluetooth Controller and Device support
    450 # tested only with btuart on an A1200
    451 
    452 # Bluetooth PCMCIA Controllers
    453 bt3c*   at pcmcia? function ?           # 3Com 3CRWB6096-A
    454 btbc*   at pcmcia? function ?           # AnyCom BlueCard LSE041/039/139
    455 
    456 # Bluetooth Device Hub
    457 bthub*  at bcsp?
    458 bthub*  at bt3c?
    459 bthub*  at btbc?
    460 bthub*  at btuart?
    461 
    462 # Bluetooth HID support
    463 bthidev* at bthub?
    464 
    465 # Bluetooth Mouse
    466 #btms*   at bthidev? reportid ?
    467 #wsmouse* at btms? mux 0
    468 
    469 # Bluetooth Keyboard
    470 #btkbd* at bthidev? reportid ?
    471 #wskbd* at btkbd? console ? mux 1
    472 
    473 # Bluetooth Apple Magic Mouse
    474 #btmagic* at bthub?
    475 #wsmouse* at btmagic? mux 0
    476 
    477 # Bluetooth Audio support
    478 #btsco* at bthub?
    479 
    480 
    481 pseudo-device	loop			# loopback network interface
    482 pseudo-device	sl			# SLIP network interfaces
    483 pseudo-device	ppp			# PPP network interfaces
    484 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    485 pseudo-device	tun			# network tunnel line discipline
    486 pseudo-device	tap			# virtual Ethernet
    487 #pseudo-device	gre			# generic L3 over IP tunnel
    488 pseudo-device	bpfilter		# Berkeley packet filter
    489 #pseudo-device	carp			# Common Address Redundancy Protocol
    490 pseudo-device	ipfilter		# IP Filter package
    491 pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
    492 #pseudo-device	faith			# IPv[46] tcp relay translation i/f
    493 pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
    494 pseudo-device	vlan			# IEEE 802.1q encapsulation
    495 pseudo-device	bridge			# simple inter-network bridging
    496 #options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
    497 pseudo-device	agr			# IEEE 802.3ad link aggregation
    498 #pseudo-device	pf			# PF packet filter
    499 #pseudo-device	pflog			# PF log if
    500 #pseudo-device	fss			# file system snapshot device
    501 #pseudo-device	putter			# for puffs and pud
    502 
    503 pseudo-device	view		4	# views (needed for grfcc)
    504 pseudo-device	pty		2	# pseudo-terminals
    505 pseudo-device	clockctl		# user control of clock subsystem
    506 
    507 #pseudo-device	wsfont			# wsfont(4) dynamic font loading support
    508 #pseudo-device	wsmux			# mouse & keyboard multiplexor
    509 
    510 pseudo-device	vnd			# vnode pseudo-disks
    511 #options 	VND_COMPRESSION		# compressed vnd(4)
    512 pseudo-device	ccd		4	# concatenated disk devices
    513 #pseudo-device	cgd		4	# cryptographic disk devices
    514 pseudo-device	raid		8	# RAIDframe disk driver
    515 options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    516 # Options to enable various other RAIDframe RAID types.
    517 # options 	RF_INCLUDE_EVENODD=1
    518 # options 	RF_INCLUDE_RAID5_RS=1
    519 # options 	RF_INCLUDE_PARITYLOGGING=1
    520 # options 	RF_INCLUDE_CHAINDECLUSTER=1
    521 # options 	RF_INCLUDE_INTERDECLUSTER=1
    522 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    523 # options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    524 
    525 #options 	RND_COM			# use "com" randomness as well (BROKEN)
    526 
    527 pseudo-device   bcsp                    # BlueCore Serial Protocol
    528 pseudo-device   btuart                  # Bluetooth HCI UART (H4)
    529 
    530 # Veriexec
    531 #
    532 # a pseudo device needed for veriexec
    533 #pseudo-device	veriexec		1
    534 #
    535 # Uncomment the fingerprint methods below that are desired. Note that
    536 # removing fingerprint methods will have almost no impact on the kernel
    537 # code size.
    538 #
    539 #options VERIFIED_EXEC_FP_RMD160
    540 #options VERIFIED_EXEC_FP_SHA256
    541 #options VERIFIED_EXEC_FP_SHA384
    542 #options VERIFIED_EXEC_FP_SHA512
    543 #options VERIFIED_EXEC_FP_SHA1
    544 #options VERIFIED_EXEC_FP_MD5
    545 
    546 config	netbsd root on ? type ?
    547