INSTALL revision 1.62
1 # $NetBSD: INSTALL,v 1.62 2005/11/03 16:49:09 chs Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.45 2005/11/03 16:48:29 chs Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.62 $" 32 33 makeoptions COPTS="-Os" 34 35 maxusers 8 36 options RTC_OFFSET=0 37 38 # 39 # mainboards to support (in addition to Amiga) 40 # 41 options DRACO 42 options BB060STUPIDROM # You need this, if you have a non-DraCo 43 # MC68060 with an OS ROM up to (at least) 44 # V40 (OS3.1) and want to boot with the 45 # bootblock. 46 # You do not need this if you have a DraCo, 47 # have no 68060 or NEVER use the bootblock 48 options P5PPC68KBOARD # Phase5 PPC/68K board support 49 # 50 # processors this kernel should support 51 # 52 options M68060 # support for 060 53 options M060SP # MC68060 software support (Required for 060) 54 options M68040 # support for 040 55 options FPSP # MC68040 floating point support 56 options M68030 # support for 030 57 options M68020 # support for 020/851 58 options FPU_EMULATE # FPU emulation 59 60 # 61 # Networking options 62 # 63 options INET # IP networking support (Required) 64 options INET6 # IPV6 65 #options IPSEC # IP security 66 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 67 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 68 #options IPSEC_DEBUG # debug for IP security 69 #options GATEWAY # Packet forwarding 70 #options DIRECTED_BROADCAST # Broadcast across subnets 71 72 73 options PPP_BSDCOMP # BSD-Compress compression support for PPP 74 options PPP_DEFLATE # Deflate compression support for PPP 75 options PPP_FILTER # Active filter support for PPP (requires bpf) 76 options PFIL_HOOKS # pfil(9) packet filter hooks 77 options IPFILTER_LOG # ipmon(8) log support 78 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 79 80 #options ALTQ # Manipulate network interfaces' output queues 81 #options ALTQ_BLUE # Stochastic Fair Blue 82 #options ALTQ_CBQ # Class-Based Queueing 83 #options ALTQ_CDNR # Diffserv Traffic Conditioner 84 #options ALTQ_FIFOQ # First-In First-Out Queue 85 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 86 #options ALTQ_HFSC # Hierarchical Fair Service Curve 87 #options ALTQ_LOCALQ # Local queueing discipline 88 #options ALTQ_PRIQ # Priority Queueing 89 #options ALTQ_RED # Random Early Detection 90 #options ALTQ_RIO # RED with IN/OUT 91 #options ALTQ_WFQ # Weighted Fair Queueing 92 93 # Filesystems 94 file-system FFS # Berkeley fast file system 95 file-system EXT2FS # second extended file system (linux) 96 #file-system LFS # log-structured filesystem (experimental) 97 98 99 file-system NFS # Network File System client side code 100 file-system ADOSFS # AmigaDOS file system 101 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 102 file-system MSDOSFS # MS-DOS filesystem 103 104 file-system KERNFS # kernel data-structure filesystem 105 106 107 # Filesystem options 108 109 #options FFS_EI # FFS Endian Independant support 110 111 112 options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 113 114 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 115 # immutable) behave as system flags. 116 117 # 118 # Compatibility options for various existing systems 119 # 120 121 122 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 123 options COMPAT_AOUT_M68K # actually make some system calls work. 124 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 125 126 127 # 128 # Support for various kernel options 129 # 130 131 #options INSECURE # disable kernel security levels 132 options SCSIVERBOSE # human readable SCSI error messages 133 options USERCONF # userconf(4) support 134 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 135 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 136 options MALLOC_NOINLINE # Not inlining MALLOC saves memory 137 138 # Enable experimental buffer queue strategy for better responsiveness under 139 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 140 #options BUFQ_READPRIO 141 #options BUFQ_PRIOCSCAN 142 143 # 144 # Misc. debugging options 145 # 146 options DDB # Kernel debugger 147 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 148 #options DIAGNOSTIC # Extra kernel sanity checks 149 #options DEBUG # Enable misc. kernel debugging code 150 #options SYSCALL_DEBUG # debug all syscalls. 151 #options SCSIDEBUG # Add SCSI debugging statements 152 #options PANICBUTTON # Forced crash via keypress (?) 153 154 # 155 # Amiga specific options 156 # 157 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 158 # first bank of RAM. (default: unlimited) 159 #options NKPTADD=4 # set this for 4 additional KPT pages 160 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 161 # per 16 MB (1<<24 bytes) of RAM 162 # uncomment and decrease this, or uncomment and 163 # increase NKPTADD if you get "out of PT pages" 164 # panics. 165 166 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 167 # before the 10 secondinterval ends, or that KBDRESET does work at all. 168 #options KBDRESET # sync on Ctrl-Amiga-Amiga 169 170 # These options improve performance with the built-in serial port 171 # on slower Amigas. Try the larger buffers first then lev6_defer. 172 #options SERIBUF_SIZE=4096 173 #options SEROBUF_SIZE=32 174 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 175 176 #options DEVRELOAD # implement /dev/reload 177 # # currently only works for a.out kernels 178 179 options RETINACONSOLE # enable code to allow retina to be console 180 options ULOWELLCONSOLE # enable code to allow a2410 to be console 181 options CL5426CONSOLE # Cirrus console 182 options CV64CONSOLE # CyberVision console 183 options TSENGCONSOLE # Tseng console 184 options CV3DCONSOLE # CyberVision 64/3D console 185 186 options GRF_ECS # Enhanced Chip Set 187 options GRF_NTSC # NTSC 188 options GRF_PAL # PAL 189 options GRF_A2024 # Support for the A2024 190 options GRF_AGA # AGA Chip Set 191 options GRF_AGA_VGA # AGA VGAONLY timing 192 options GRF_SUPER72 # AGA Super-72 193 #options KFONT_8X11 # 8x11 font 194 195 # select a font for the console according to the character set and keymap 196 # you want to use 197 options KFONT_CONS_ISO8859_1 198 #options KFONT_CONS_ISO8859_2 199 200 # This is how you would tell the kernel the A2410 oscillator frequencies: 201 # The used frequencies are the defaults, and do not need option setting 202 #options ULOWELL_OSC1=36000000 203 #options ULOWELL_OSC2=66667000 204 205 # This is how you specify the blitting speed, higher values may speed up blits 206 # a littel bit. If you raise this value too much some trash may appear. 207 # the commented version is the default. 208 #options RH_MEMCLK=61000000 209 # this option enables the 64 bit sprite which does not work 210 # for quite a few people. E.g. The cursor sprite will turn to a block 211 # when moved to the top of the screen in X. 212 #options RH_64BIT_SPRITE 213 # enables fast scroll code appears to now work on 040 systems. 214 #options RETINA_SPEED_HACK 215 # enables the Hardwarecursor which does not work on some systems. 216 #options RH_HARDWARECURSOR 217 218 # wscons aware interface to amiga custom chips. 219 # If you enable it enable also wskbd. 220 # 221 222 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 223 #wsdisplay0 at amidisplaycc0 console ? 224 #options WSEMUL_VT100 225 #options FONT_VT220L8x10 226 #options FONT_VT220ISO8x16 227 228 grfcc0 at mainbus0 # custom chips 229 grfrt0 at zbus0 # retina II 230 grfrh0 at zbus0 # retina III 231 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 232 grful0 at zbus0 # A2410 233 grfcv0 at zbus0 # CyberVision 64 234 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 235 grfcv3d0 at zbus0 # CyberVision 64/3D 236 237 grf0 at grfcc0 238 grf1 at grfrt0 239 grf2 at grfrh0 240 grf3 at grfcl? 241 grf4 at grful0 242 grf5 at grfcv0 243 grf6 at grfet? 244 grf7 at grfcv3d0 245 ite0 at grf0 # terminal emulators for grfs 246 ite1 at grf1 # terminal emulators for grfs 247 ite2 at grf2 # terminal emulators for grfs 248 ite3 at grf3 # terminal emulators for grfs 249 ite4 at grf4 # terminal emulators for grfs 250 ite5 at grf5 # terminal emulators for grfs 251 ite6 at grf6 # terminal emulators for grfs 252 ite7 at grf7 # terminal emulators for grfs 253 254 msc0 at zbus0 # A2232 MSC multiport serial. 255 mfc0 at zbus0 # MultiFaceCard I/O board 256 mfcs0 at mfc0 unit 0 # MFC serial 257 mfcs1 at mfc0 unit 1 # MFC serial 258 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 259 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 260 #mfcs2 at mfc1 unit 0 261 #mfcs3 at mfc1 unit 1 262 #mfcp1 at mfc1 unit 0 263 264 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 265 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 266 com* at hyper? port ? # Hypercom3/4 serial ports 267 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 268 269 #options IOBZCLOCK=22118400 # default, uncomment the next line 270 #options IOBZCLOCK=24000000 # if needed. 271 272 iobl* at zbus? # zbus IOBlix 273 com* at iobl? port ? # IOBlix serial ports 274 lpt* at iobl? port ? # IOBlix parallel ports 275 276 277 # 278 # Keyboard device. Optionally can attach a wskbd. 279 # wskbd works together with a wsdisplay so enable them both if you will. 280 # Don't enable wskbd if you use ite. 281 # 282 # XXX in std.amiga: kbd0 at mainbus0 283 284 #wskbd0 at kbd0 console ? 285 286 287 # 288 # Amiga Mainboard devices (sans graphics and keyboard) 289 # 290 291 ser0 at mainbus0 # Amiga onboard serial 292 par0 at mainbus0 # Amiga onboard parallel 293 ms* at mainbus0 # Amiga mice 294 fdc0 at mainbus0 # Amiga FDC 295 fd* at fdc0 unit ? # floppy disks on the later 296 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 297 a2kbbc0 at mainbus0 # A2000 battery backed clock 298 299 300 #wsmouse* at ms? 301 302 # 303 # DraCo Mainboard devices (sans keyboard) 304 # 305 306 drbbc0 at mainbus0 # DraCo battery backed clock 307 drsupio0 at mainbus0 # DraCo superio chip 308 com* at drsupio? port ? # DraCo serial 309 lpt0 at drsupio? port ? # DraCo parallel 310 311 # 312 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 313 # 314 315 316 # Ethernet cards: 317 le* at zbus0 # A2065, Ameristar, Ariadne 318 ne* at zbus0 # AriadneII, X-surf 319 ed* at zbus0 # Hydra, ASDG LanRover 320 es* at zbus0 # CEI A4066 EthernetPLUS 321 qn* at zbus0 # Quicknet 322 323 # Arcnet 324 bah* at zbus0 # C=/Ameristar A2060 / 560 325 326 # Greater Valley Product Bus 327 gvpbus* at zbus0 328 329 # scsi stuff, all possible 330 gtsc0 at gvpbus? # GVP series II scsi 331 scsibus* at gtsc0 332 ahsc0 at mainbus0 # A3000 scsi 333 scsibus* at ahsc0 334 atzsc0 at zbus0 # A2091 scsi 335 scsibus* at atzsc0 336 wstsc0 at zbus0 # Wordsync II scsi 337 scsibus* at wstsc0 338 ivsc0 at zbus0 # IVS scsi 339 scsibus* at ivsc0 340 mlhsc0 at zbus0 # Hacker scsi 341 scsibus* at mlhsc0 342 otgsc0 at zbus0 # 12 gauge scsi 343 scsibus* at otgsc0 344 zssc0 at zbus0 # Zeus scsi 345 scsibus* at zssc0 346 mgnsc0 at zbus0 # Magnum scsi 347 scsibus* at mgnsc0 348 wesc0 at zbus0 # Warp Engine scsi 349 scsibus* at wesc0 350 afsc0 at zbus0 # A4091 scsi 351 scsibus* at afsc0 352 aftsc0 at mainbus0 # A4000T scsi 353 scsibus* at aftsc0 354 flsc0 at zbus0 # FastlaneZ3 scsi 355 scsibus* at flsc0 356 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 357 scsibus* at bzsc0 358 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 359 scsibus* at bzivsc0 360 bztzsc0 at zbus0 # Blizzard 2060 scsi 361 scsibus* at bztzsc0 362 cbsc0 at zbus0 # CyberSCSI I 363 scsibus* at cbsc0 364 cbiisc0 at zbus0 # CyberSCSI II 365 scsibus* at cbiisc0 366 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 367 scsibus* at cbiiisc0 368 empsc0 at zbus0 # Emplant scsi 369 scsibus* at empsc0 370 371 wdc0 at mainbus0 # A4000 & A1200 IDE bus 372 atabus* at wdc? channel ? # ATA bus 373 wd* at atabus? drive ? # + drives 374 atapibus* at atabus? # ATAPI bus 375 cd* at atapibus? drive ? # ATAPI CD-ROM drives 376 sd* at atapibus? drive ? # ATAPI disk drives 377 378 pccard0 at mainbus0 379 pcmcia* at pccard0 380 com* at pcmcia? function ? # Modems and serial cards 381 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 382 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 383 wdc* at pcmcia? function ? 384 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 385 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 386 mbe* at pcmcia? function ? # MB8696x based Ethernet 387 ne* at pcmcia? function ? # NE2000-compatible Ethernet 388 sm* at pcmcia? function ? # Megahertz Ethernet 389 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 390 com* at mhzc? 391 sm* at mhzc? 392 393 394 drsc0 at mainbus0 # DraCo scsi 395 scsibus* at drsc0 396 397 398 # each hard drive from low target to high 399 # will configure to the next available sd unit number 400 sd* at scsibus? target ? lun ? # scsi disks 401 st* at scsibus? target ? lun ? # scsi tapes 402 cd* at scsibus? target ? lun ? # scsi cds 403 ch* at scsibus? target ? lun ? # scsi autochangers 404 405 pseudo-device loop # loopback network interface 406 pseudo-device sl 1 # SLIP network interfaces 407 pseudo-device ppp 1 # PPP network interfaces 408 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 409 pseudo-device tun 1 # network tunnel line discipline 410 pseudo-device tap # virtual Ethernet 411 #pseudo-device gre 2 # generic L3 over IP tunnel 412 pseudo-device bpfilter 16 # Berkeley packet filter 413 pseudo-device ipfilter # IP Filter package 414 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 415 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 416 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 417 pseudo-device vlan # IEEE 802.1q encapsulation 418 pseudo-device bridge # simple inter-network bridging 419 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 420 #pseudo-device pf # PF packet filter 421 #pseudo-device pflog # PF log if 422 #pseudo-device fss 4 # file system snapshot device 423 424 pseudo-device view 4 # views (needed for grfcc) 425 pseudo-device pty 2 # pseudo-terminals 426 pseudo-device clockctl # user control of clock subsystem 427 428 #pseudo-device wsfont # wsfont(4) dynamic font loading support 429 #pseudo-device wsmux # mouse & keyboard multiplexor 430 431 pseudo-device vnd 4 # vnode pseudo-disks 432 #options VND_COMPRESSION # compressed vnd(4) 433 pseudo-device ccd 4 # concatenated disk devices 434 #pseudo-device cgd 4 # cryptographic disk devices 435 pseudo-device raid 8 # RAIDframe disk driver 436 options RAID_AUTOCONFIG # auto-configuration of RAID components 437 # Options to enable various other RAIDframe RAID types. 438 # options RF_INCLUDE_EVENODD=1 439 # options RF_INCLUDE_RAID5_RS=1 440 # options RF_INCLUDE_PARITYLOGGING=1 441 # options RF_INCLUDE_CHAINDECLUSTER=1 442 # options RF_INCLUDE_INTERDECLUSTER=1 443 # options RF_INCLUDE_PARITY_DECLUSTERING=1 444 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 445 446 pseudo-device rnd # /dev/random and in-kernel generator 447 #options RND_COM # use "com" randomness as well (BROKEN) 448 449 450 config netbsd root on ? type ? 451
Indexes created Sat Oct 11 16:09:52 GMT 2025