INSTALL revision 1.65
1# $NetBSD: INSTALL,v 1.65 2005/12/10 14:54:40 tsutsui Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.48 2005/12/10 14:53:10 tsutsui Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.65 $" 32 33makeoptions COPTS="-Os" 34 35maxusers 8 36options RTC_OFFSET=0 37 38# 39# mainboards to support (in addition to Amiga) 40# 41options DRACO 42options BB060STUPIDROM # You need this, if you have a non-DraCo 43 # MC68060 with an OS ROM up to (at least) 44 # V40 (OS3.1) and want to boot with the 45 # bootblock. 46 # You do not need this if you have a DraCo, 47 # have no 68060 or NEVER use the bootblock 48options P5PPC68KBOARD # Phase5 PPC/68K board support 49# 50# processors this kernel should support 51# 52options M68060 # support for 060 53options M060SP # MC68060 software support (Required for 060) 54options M68040 # support for 040 55options FPSP # MC68040 floating point support 56options M68030 # support for 030 57options M68020 # support for 020/851 58options FPU_EMULATE # FPU emulation 59 60# 61# Networking options 62# 63options INET # IP networking support (Required) 64options INET6 # IPV6 65#options IPSEC # IP security 66#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 67#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 68#options IPSEC_DEBUG # debug for IP security 69#options GATEWAY # Packet forwarding 70#options DIRECTED_BROADCAST # Broadcast across subnets 71 72 73options PPP_BSDCOMP # BSD-Compress compression support for PPP 74options PPP_DEFLATE # Deflate compression support for PPP 75options PPP_FILTER # Active filter support for PPP (requires bpf) 76options PFIL_HOOKS # pfil(9) packet filter hooks 77options IPFILTER_LOG # ipmon(8) log support 78#options IPFILTER_DEFAULT_BLOCK # block all packets by default 79 80#options ALTQ # Manipulate network interfaces' output queues 81#options ALTQ_BLUE # Stochastic Fair Blue 82#options ALTQ_CBQ # Class-Based Queueing 83#options ALTQ_CDNR # Diffserv Traffic Conditioner 84#options ALTQ_FIFOQ # First-In First-Out Queue 85#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 86#options ALTQ_HFSC # Hierarchical Fair Service Curve 87#options ALTQ_LOCALQ # Local queueing discipline 88#options ALTQ_PRIQ # Priority Queueing 89#options ALTQ_RED # Random Early Detection 90#options ALTQ_RIO # RED with IN/OUT 91#options ALTQ_WFQ # Weighted Fair Queueing 92 93# Filesystems 94file-system FFS # Berkeley fast file system 95file-system EXT2FS # second extended file system (linux) 96#file-system LFS # log-structured filesystem (experimental) 97 98 99file-system NFS # Network File System client side code 100file-system ADOSFS # AmigaDOS file system 101file-system CD9660 # ISO 9660 + Rock Ridge filesystem 102file-system MSDOSFS # MS-DOS filesystem 103 104file-system KERNFS # kernel data-structure filesystem 105 106 107# Filesystem options 108 109#options FFS_EI # FFS Endian Independant support 110 111 112#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 113 # immutable) behave as system flags. 114 115# 116# Compatibility options for various existing systems 117# 118 119 120options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 121options COMPAT_AOUT_M68K # actually make some system calls work. 122options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 123 124 125# 126# Support for various kernel options 127# 128 129#options INSECURE # disable kernel security levels 130options SCSIVERBOSE # human readable SCSI error messages 131options USERCONF # userconf(4) support 132options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 133options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 134options MALLOC_NOINLINE # Not inlining MALLOC saves memory 135 136# Enable experimental buffer queue strategy for better responsiveness under 137# high disk I/O load. Use it with caution - it's not proven to be stable yet. 138#options BUFQ_READPRIO 139#options BUFQ_PRIOCSCAN 140 141# 142# Misc. debugging options 143# 144options DDB # Kernel debugger 145#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 146#options DIAGNOSTIC # Extra kernel sanity checks 147#options DEBUG # Enable misc. kernel debugging code 148#options SYSCALL_DEBUG # debug all syscalls. 149#options SCSIDEBUG # Add SCSI debugging statements 150#options PANICBUTTON # Forced crash via keypress (?) 151 152# 153# Amiga specific options 154# 155#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 156 # first bank of RAM. (default: unlimited) 157#options NKPTADD=4 # set this for 4 additional KPT pages 158#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 159 # per 16 MB (1<<24 bytes) of RAM 160 # uncomment and decrease this, or uncomment and 161 # increase NKPTADD if you get "out of PT pages" 162 # panics. 163 164# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 165# before the 10 secondinterval ends, or that KBDRESET does work at all. 166#options KBDRESET # sync on Ctrl-Amiga-Amiga 167 168# These options improve performance with the built-in serial port 169# on slower Amigas. Try the larger buffers first then lev6_defer. 170#options SERIBUF_SIZE=4096 171#options SEROBUF_SIZE=32 172#options LEV6_DEFER # defers l6 to l4 (below serial l5) 173 174#options DEVRELOAD # implement /dev/reload 175# # currently only works for a.out kernels 176 177options RETINACONSOLE # enable code to allow retina to be console 178options ULOWELLCONSOLE # enable code to allow a2410 to be console 179options CL5426CONSOLE # Cirrus console 180options CV64CONSOLE # CyberVision console 181options TSENGCONSOLE # Tseng console 182options CV3DCONSOLE # CyberVision 64/3D console 183 184options GRF_ECS # Enhanced Chip Set 185options GRF_NTSC # NTSC 186options GRF_PAL # PAL 187options GRF_A2024 # Support for the A2024 188options GRF_AGA # AGA Chip Set 189options GRF_AGA_VGA # AGA VGAONLY timing 190options GRF_SUPER72 # AGA Super-72 191#options KFONT_8X11 # 8x11 font 192 193# select a font for the console according to the character set and keymap 194# you want to use 195options KFONT_CONS_ISO8859_1 196#options KFONT_CONS_ISO8859_2 197 198# This is how you would tell the kernel the A2410 oscillator frequencies: 199# The used frequencies are the defaults, and do not need option setting 200#options ULOWELL_OSC1=36000000 201#options ULOWELL_OSC2=66667000 202 203# This is how you specify the blitting speed, higher values may speed up blits 204# a littel bit. If you raise this value too much some trash may appear. 205# the commented version is the default. 206#options RH_MEMCLK=61000000 207# this option enables the 64 bit sprite which does not work 208# for quite a few people. E.g. The cursor sprite will turn to a block 209# when moved to the top of the screen in X. 210#options RH_64BIT_SPRITE 211# enables fast scroll code appears to now work on 040 systems. 212#options RETINA_SPEED_HACK 213# enables the Hardwarecursor which does not work on some systems. 214#options RH_HARDWARECURSOR 215 216# wscons aware interface to amiga custom chips. 217# If you enable it enable also wskbd. 218# 219 220#amidisplaycc0 at mainbus0 # wscons interface to custom chips 221#wsdisplay0 at amidisplaycc0 console ? 222#options WSEMUL_VT100 223#options FONT_VT220L8x10 224#options FONT_VT220ISO8x16 225 226grfcc0 at mainbus0 # custom chips 227grfrt0 at zbus0 # retina II 228grfrh0 at zbus0 # retina III 229grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 230grful0 at zbus0 # A2410 231grfcv0 at zbus0 # CyberVision 64 232grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 233grfcv3d0 at zbus0 # CyberVision 64/3D 234 235grf0 at grfcc0 236grf1 at grfrt0 237grf2 at grfrh0 238grf3 at grfcl? 239grf4 at grful0 240grf5 at grfcv0 241grf6 at grfet? 242grf7 at grfcv3d0 243ite0 at grf0 # terminal emulators for grfs 244ite1 at grf1 # terminal emulators for grfs 245ite2 at grf2 # terminal emulators for grfs 246ite3 at grf3 # terminal emulators for grfs 247ite4 at grf4 # terminal emulators for grfs 248ite5 at grf5 # terminal emulators for grfs 249ite6 at grf6 # terminal emulators for grfs 250ite7 at grf7 # terminal emulators for grfs 251 252msc0 at zbus0 # A2232 MSC multiport serial. 253mfc0 at zbus0 # MultiFaceCard I/O board 254mfcs0 at mfc0 unit 0 # MFC serial 255mfcs1 at mfc0 unit 1 # MFC serial 256#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 257#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 258#mfcs2 at mfc1 unit 0 259#mfcs3 at mfc1 unit 1 260#mfcp1 at mfc1 unit 0 261 262hyper* at zbus? # zbus HyperCom3/3+/4/4+ 263#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 264com* at hyper? port ? # Hypercom3/4 serial ports 265lpt* at hyper? port ? # Hypercom3+/4+ parallel port 266 267#options IOBZCLOCK=22118400 # default, uncomment the next line 268#options IOBZCLOCK=24000000 # if needed. 269 270iobl* at zbus? # zbus IOBlix 271com* at iobl? port ? # IOBlix serial ports 272lpt* at iobl? port ? # IOBlix parallel ports 273 274 275# 276# Keyboard device. Optionally can attach a wskbd. 277# wskbd works together with a wsdisplay so enable them both if you will. 278# Don't enable wskbd if you use ite. 279# 280# XXX in std.amiga: kbd0 at mainbus0 281 282#wskbd0 at kbd0 console ? 283 284 285# 286# Amiga Mainboard devices (sans graphics and keyboard) 287# 288 289ser0 at mainbus0 # Amiga onboard serial 290par0 at mainbus0 # Amiga onboard parallel 291ms* at mainbus0 # Amiga mice 292fdc0 at mainbus0 # Amiga FDC 293fd* at fdc0 unit ? # floppy disks on the later 294a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 295a2kbbc0 at mainbus0 # A2000 battery backed clock 296 297 298#wsmouse* at ms? 299 300# 301# DraCo Mainboard devices (sans keyboard) 302# 303 304drbbc0 at mainbus0 # DraCo battery backed clock 305drsupio0 at mainbus0 # DraCo superio chip 306com* at drsupio? port ? # DraCo serial 307lpt0 at drsupio? port ? # DraCo parallel 308 309# 310# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 311# 312 313 314# Ethernet cards: 315le* at zbus0 # A2065, Ameristar, Ariadne 316ne* at zbus0 # AriadneII, X-surf 317ed* at zbus0 # Hydra, ASDG LanRover 318es* at zbus0 # CEI A4066 EthernetPLUS 319qn* at zbus0 # Quicknet 320 321# Arcnet 322bah* at zbus0 # C=/Ameristar A2060 / 560 323 324# Greater Valley Product Bus 325gvpbus* at zbus0 326 327# scsi stuff, all possible 328gtsc0 at gvpbus? # GVP series II scsi 329scsibus* at gtsc0 330ahsc0 at mainbus0 # A3000 scsi 331scsibus* at ahsc0 332atzsc0 at zbus0 # A2091 scsi 333scsibus* at atzsc0 334wstsc0 at zbus0 # Wordsync II scsi 335scsibus* at wstsc0 336ivsc0 at zbus0 # IVS scsi 337scsibus* at ivsc0 338mlhsc0 at zbus0 # Hacker scsi 339scsibus* at mlhsc0 340otgsc0 at zbus0 # 12 gauge scsi 341scsibus* at otgsc0 342zssc0 at zbus0 # Zeus scsi 343scsibus* at zssc0 344mgnsc0 at zbus0 # Magnum scsi 345scsibus* at mgnsc0 346wesc0 at zbus0 # Warp Engine scsi 347scsibus* at wesc0 348afsc0 at zbus0 # A4091 scsi 349scsibus* at afsc0 350aftsc0 at mainbus0 # A4000T scsi 351scsibus* at aftsc0 352flsc0 at zbus0 # FastlaneZ3 scsi 353scsibus* at flsc0 354bzsc0 at zbus0 # Blizzard 1230 I,II scsi 355scsibus* at bzsc0 356bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 357scsibus* at bzivsc0 358bztzsc0 at zbus0 # Blizzard 2060 scsi 359scsibus* at bztzsc0 360cbsc0 at zbus0 # CyberSCSI I 361scsibus* at cbsc0 362cbiisc0 at zbus0 # CyberSCSI II 363scsibus* at cbiisc0 364cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 365scsibus* at cbiiisc0 366empsc0 at zbus0 # Emplant scsi 367scsibus* at empsc0 368 369wdc0 at mainbus0 # A4000 & A1200 IDE bus 370atabus* at wdc? channel ? # ATA bus 371wd* at atabus? drive ? # + drives 372atapibus* at atabus? # ATAPI bus 373cd* at atapibus? drive ? # ATAPI CD-ROM drives 374sd* at atapibus? drive ? # ATAPI disk drives 375 376pccard0 at mainbus0 377pcmcia* at pccard0 378com* at pcmcia? function ? # Modems and serial cards 379pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 380aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 381wdc* at pcmcia? function ? 382awi* at pcmcia? function ? # BayStack 650 (802.11FH) 383ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 384mbe* at pcmcia? function ? # MB8696x based Ethernet 385ne* at pcmcia? function ? # NE2000-compatible Ethernet 386sm* at pcmcia? function ? # Megahertz Ethernet 387mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 388com* at mhzc? 389sm* at mhzc? 390 391 392drsc0 at mainbus0 # DraCo scsi 393scsibus* at drsc0 394 395 396# each hard drive from low target to high 397# will configure to the next available sd unit number 398sd* at scsibus? target ? lun ? # scsi disks 399st* at scsibus? target ? lun ? # scsi tapes 400cd* at scsibus? target ? lun ? # scsi cds 401ch* at scsibus? target ? lun ? # scsi autochangers 402 403pseudo-device loop # loopback network interface 404pseudo-device sl 1 # SLIP network interfaces 405pseudo-device ppp 1 # PPP network interfaces 406pseudo-device pppoe # PPP over Ethernet (RFC 2516) 407pseudo-device tun 1 # network tunnel line discipline 408pseudo-device tap # virtual Ethernet 409#pseudo-device gre 2 # generic L3 over IP tunnel 410pseudo-device bpfilter 16 # Berkeley packet filter 411pseudo-device ipfilter # IP Filter package 412pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 413#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 414#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 415pseudo-device vlan # IEEE 802.1q encapsulation 416pseudo-device bridge # simple inter-network bridging 417#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 418#pseudo-device pf # PF packet filter 419#pseudo-device pflog # PF log if 420#pseudo-device fss 4 # file system snapshot device 421 422pseudo-device view 4 # views (needed for grfcc) 423pseudo-device pty 2 # pseudo-terminals 424pseudo-device clockctl # user control of clock subsystem 425 426#pseudo-device wsfont # wsfont(4) dynamic font loading support 427#pseudo-device wsmux # mouse & keyboard multiplexor 428 429pseudo-device vnd 4 # vnode pseudo-disks 430#options VND_COMPRESSION # compressed vnd(4) 431pseudo-device ccd 4 # concatenated disk devices 432#pseudo-device cgd 4 # cryptographic disk devices 433pseudo-device raid 8 # RAIDframe disk driver 434options RAID_AUTOCONFIG # auto-configuration of RAID components 435# Options to enable various other RAIDframe RAID types. 436# options RF_INCLUDE_EVENODD=1 437# options RF_INCLUDE_RAID5_RS=1 438# options RF_INCLUDE_PARITYLOGGING=1 439# options RF_INCLUDE_CHAINDECLUSTER=1 440# options RF_INCLUDE_INTERDECLUSTER=1 441# options RF_INCLUDE_PARITY_DECLUSTERING=1 442# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 443 444pseudo-device rnd # /dev/random and in-kernel generator 445#options RND_COM # use "com" randomness as well (BROKEN) 446 447 448# Veriexec 449#options VERIFIED_EXEC 450# 451# a pseudo device needed for veriexec 452#pseudo-device veriexec 1 453# 454# Uncomment the fingerprint methods below that are desired. Note that 455# removing fingerprint methods will have almost no impact on the kernel 456# code size. 457# 458#options VERIFIED_EXEC_FP_RMD160 459#options VERIFIED_EXEC_FP_SHA256 460#options VERIFIED_EXEC_FP_SHA384 461#options VERIFIED_EXEC_FP_SHA512 462#options VERIFIED_EXEC_FP_SHA1 463#options VERIFIED_EXEC_FP_MD5 464 465config netbsd root on ? type ? 466