MDINSTALL revision 1.14
1 # $NetBSD: MDINSTALL,v 1.14 2002/07/05 13:40:11 abs Exp $ 2 3 # 4 # INSTALL kernel for ramdisk installation 5 # 6 7 include "arch/amiga/conf/std.amiga" 8 9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11 maxusers 8 12 options RTC_OFFSET=0 13 14 # 15 # mainboards to support (in addition to Amiga) 16 # 17 options DRACO 18 options BB060STUPIDROM # You need this, if you have a non-DraCo 19 # MC68060 with an OS ROM up to (at least) 20 # V40 (OS3.1) and want to boot with the 21 # bootblock. 22 # You do not need this if you have a DraCo, 23 # have no 68060 or NEVER use the bootblock 24 # 25 # processors this kernel should support 26 # 27 options M68060 # support for 060 28 options M060SP # MC68060 software support (Required for 060) 29 options M68040 # support for 040 30 options FPSP # MC68040 floating point support 31 options M68030 # support for 030 32 options M68020 # support for 020/851 33 options FPU_EMULATE # FPU emulation 34 # 35 # Networking options 36 # 37 options INET # IP networking support (Required) 38 options PPP_BSDCOMP # BSD-Compress compression support for PPP 39 options PPP_DEFLATE # Deflate compression support for PPP 40 options PPP_FILTER # Active filter support for PPP (requires bpf) 41 42 # Filesystems 43 file-system FFS # Berkeley fast file system 44 file-system MFS # Memory based filesystem 45 file-system NFS # Network File System client side code 46 file-system ADOSFS # AmigaDOS file system 47 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 48 file-system MSDOSFS # MS-DOS filesystem 49 file-system KERNFS # kernel data-structure filesystem 50 51 options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 52 53 # 54 # Support for various kernel options 55 # 56 options KTRACE # system call tracing support 57 options UCONSOLE # anyone can redirect a virtual console 58 #options INSECURE # disable kernel security levels 59 options SCSIVERBOSE # human readable SCSI error messages 60 options NTP # NTP phase/frequency locked loop 61 #options USERCONF # userconf(4) support 62 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 63 options MALLOC_NOINLINE # Not inlining MALLOC saves memory 64 65 # 66 # Misc. debugging options 67 # 68 options DDB # Kernel debugger 69 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 70 options DIAGNOSTIC # Extra kernel sanity checks 71 #options DEBUG # Enable misc. kernel debugging code 72 #options SYSCALL_DEBUG # debug all syscalls. 73 #options SCSIDEBUG # Add SCSI debugging statements 74 #options PANICBUTTON # Forced crash via keypress (?) 75 76 # 77 # Amiga specific options 78 # 79 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 80 # first bank of RAM. (default: unlimited) 81 #options NKPTADD=4 # set this for 4 additional KPT pages 82 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 83 # per 16 MB (1<<24 bytes) of RAM 84 # define and decrease this, or define and 85 # increase NKPTADD if you get "out of PT pages" 86 # panics. 87 88 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 89 # before the 10 secondinterval ends, or that KBDRESET does work at all. 90 #options KBDRESET # sync on Ctrl-Amiga-Amiga 91 92 # These options improve performance with the built-in serial port 93 # on slower Amigas. Try the larger buffers first then lev6_defer. 94 #options SERIBUF_SIZE=4096 95 #options SEROBUF_SIZE=32 96 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 97 98 options RETINACONSOLE # enable code to allow retina to be console 99 options ULOWELLCONSOLE # enable code to allow a2410 to be console 100 options CL5426CONSOLE # Cirrus console 101 options CV64CONSOLE # CyberVision console 102 options TSENGCONSOLE # Tseng console 103 options CV3DCONSOLE # CyberVision 64/3D console 104 105 options GRF_ECS # Enhanced Chip Set 106 options GRF_NTSC # NTSC 107 options GRF_PAL # PAL 108 options GRF_A2024 # Support for the A2024 109 options GRF_AGA # AGA Chip Set 110 options GRF_AGA_VGA # AGA VGAONLY timing 111 options GRF_SUPER72 # AGA Super-72 112 #options KFONT_8X11 # 8x11 font 113 114 # select a font for the console according to the character set and keymap 115 # you want to use 116 options KFONT_CONS_ISO8859_1 117 #options KFONT_CONS_ISO8859_2 118 119 # This is how you would tell the kernel the A2410 oscillator frequencies: 120 # The used frequencies are the defaults, and do not need option setting 121 #options ULOWELL_OSC1=36000000 122 #options ULOWELL_OSC2=66667000 123 124 # This is how you specify the blitting speed, higher values may speed up blits 125 # a littel bit. If you raise this value too much some trash may appear. 126 # the commented version is the default. 127 #options RH_MEMCLK=61000000 128 # this option enables the 64 bit sprite which does not work 129 # for quite a few people. E.g. The cursor sprite will turn to a block 130 # when moved to the top of the screen in X. 131 #options RH_64BIT_SPRITE 132 # enables fast scroll code appears to now work on 040 systems. 133 #options RETINA_SPEED_HACK 134 # enables the Hardwarecursor which does not work on some systems. 135 #options RH_HARDWARECURSOR 136 137 grfcc0 at mainbus0 # custom chips 138 grfrt0 at zbus0 # retina II 139 grfrh0 at zbus0 # retina III 140 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 141 grful0 at zbus0 # A2410 142 grfcv0 at zbus0 # CyberVision 64 143 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 144 grfcv3d0 at zbus0 # CyberVision 64/3D 145 146 grf0 at grfcc0 147 grf1 at grfrt0 148 grf2 at grfrh0 149 grf3 at grfcl? 150 grf4 at grful0 151 grf5 at grfcv0 152 grf6 at grfet? 153 grf7 at grfcv3d0 154 155 ite0 at grf0 # terminal emulators for grfs 156 ite1 at grf1 # terminal emulators for grfs 157 ite2 at grf2 # terminal emulators for grfs 158 ite3 at grf3 # terminal emulators for grfs 159 ite4 at grf4 # terminal emulators for grfs 160 ite5 at grf5 # terminal emulators for grfs 161 ite6 at grf6 # terminal emulators for grfs 162 ite7 at grf7 # terminal emulators for grfs 163 164 msc0 at zbus0 # A2232 MSC multiport serial. 165 mfc0 at zbus0 # MultiFaceCard I/O board 166 mfcs0 at mfc0 unit 0 # MFC serial 167 mfcs1 at mfc0 unit 1 # MFC serial 168 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 169 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 170 #mfcs2 at mfc1 unit 0 171 #mfcs3 at mfc1 unit 1 172 #mfcp1 at mfc1 unit 0 173 174 hyper* at zbus? # zbus HyperCom3 + HyperCom4 175 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 176 com* at hyper? port ? # Hypercom3/4 serial ports 177 #lpt* at hyper? port ? # not yet: Hypercom3 parallel port 178 179 # 180 # Amiga Mainboard devices (sans graphics and keyboard) 181 # 182 183 ser0 at mainbus0 # Amiga onboard serial 184 par0 at mainbus0 # Amiga onboard parallel 185 ms* at mainbus0 # Amiga mice 186 fdc0 at mainbus0 # Amiga FDC 187 fd* at fdc0 unit ? # floppy disks on the later 188 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 189 a2kbbc0 at mainbus0 # A2000 battery backed clock 190 aucc* at mainbus0 # Amiga CC audio 191 audio* at aucc? 192 193 # 194 # DraCo Mainboard devices (sans keyboard) 195 # 196 197 drbbc0 at mainbus0 # DraCo battery backed clock 198 drsupio0 at mainbus0 # DraCo superio chip 199 com* at drsupio? port ? # DraCo serial 200 lpt0 at drsupio? port ? # DraCo parallel 201 202 # 203 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 204 # 205 206 # Ethernet cards: 207 le* at zbus0 # A2065, Ameristar, Ariadne 208 ne* at zbus0 # AriadneII 209 ed* at zbus0 # Hydra, ASDG LanRover 210 es* at zbus0 # CEI A4066 EthernetPLUS 211 qn* at zbus0 # Quicknet 212 213 # Arcnet 214 bah* at zbus0 # C=/Ameristar A2060 / 560 215 216 # Greater Valley Product Bus 217 gvpbus* at zbus0 218 219 # scsi stuff, all possible 220 gtsc0 at gvpbus? # GVP series II scsi 221 scsibus* at gtsc0 222 ahsc0 at mainbus0 # A3000 scsi 223 scsibus* at ahsc0 224 atzsc0 at zbus0 # A2091 scsi 225 scsibus* at atzsc0 226 wstsc0 at zbus0 # Wordsync II scsi 227 scsibus* at wstsc0 228 ivsc0 at zbus0 # IVS scsi 229 scsibus* at ivsc0 230 mlhsc0 at zbus0 # Hacker scsi 231 scsibus* at mlhsc0 232 otgsc0 at zbus0 # 12 gauge scsi 233 scsibus* at otgsc0 234 zssc0 at zbus0 # Zeus scsi 235 scsibus* at zssc0 236 mgnsc0 at zbus0 # Magnum scsi 237 scsibus* at mgnsc0 238 wesc0 at zbus0 # Warp Engine scsi 239 scsibus* at wesc0 240 afsc0 at zbus0 # A4091 scsi 241 scsibus* at afsc0 242 aftsc0 at mainbus0 # A4000T scsi 243 scsibus* at aftsc0 244 flsc0 at zbus0 # FastlaneZ3 scsi 245 scsibus* at flsc0 246 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 247 scsibus* at bzsc0 248 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 249 scsibus* at bzivsc0 250 bztzsc0 at zbus0 # Blizzard 2060 scsi 251 scsibus* at bztzsc0 252 cbsc0 at zbus0 # CyberSCSI I 253 scsibus* at cbsc0 254 cbiisc0 at zbus0 # CyberSCSI II 255 scsibus* at cbiisc0 256 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 257 scsibus* at cbiiisc0 258 empsc0 at zbus0 # Emplant scsi 259 scsibus* at empsc0 260 idesc0 at mainbus0 # A4000 & A1200 IDE 261 scsibus* at idesc0 262 263 drsc0 at mainbus0 # DraCo scsi 264 scsibus* at drsc0 265 266 267 # each hard drive from low target to high 268 # will configure to the next available sd unit number 269 sd* at scsibus? target ? lun ? # scsi disks 270 st* at scsibus? target ? lun ? # scsi tapes 271 cd* at scsibus? target ? lun ? # scsi cds 272 273 pseudo-device loop # loopback network interface 274 pseudo-device sl 1 # SLIP network interfaces 275 pseudo-device ppp 1 # PPP network interfaces 276 277 pseudo-device view 10 # views 278 pseudo-device pty # pseudo-terminals 279 280 pseudo-device vnd 4 # vnode pseudo-disks 281 282 # rnd is EXPERIMENTAL at this point. 283 #pseudo-device rnd # /dev/random and in-kernel generator 284 #options RND_COM # use "com" randomness as well (BROKEN) 285 286 config netbsd root on ? type ? 287 288 # Enable the hooks used for initializing the root memory-disk. 289 options MEMORY_DISK_HOOKS 290 options MEMORY_DISK_IS_ROOT # force root on memory disk 291 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 292 options MEMORY_DISK_ROOT_SIZE=2048 # size of memory disk, in blocks 293 294 pseudo-device md 1 # memory disk [ramdisk] 295
Indexes created Sat Oct 11 14:09:46 GMT 2025