MDINSTALL revision 1.16.2.9
1 # $NetBSD: MDINSTALL,v 1.16.2.9 2005/12/11 10:28:13 christos Exp $ 2 3 # 4 # INSTALL kernel for ramdisk installation 5 # 6 7 include "arch/amiga/conf/std.amiga" 8 9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11 maxusers 8 12 options RTC_OFFSET=0 13 14 # 15 # mainboards to support (in addition to Amiga) 16 # 17 options DRACO 18 options BB060STUPIDROM # You need this, if you have a non-DraCo 19 # MC68060 with an OS ROM up to (at least) 20 # V40 (OS3.1) and want to boot with the 21 # bootblock. 22 # You do not need this if you have a DraCo, 23 # have no 68060 or NEVER use the bootblock 24 # 25 # processors this kernel should support 26 # 27 options M68060 # support for 060 28 options M060SP # MC68060 software support (Required for 060) 29 options M68040 # support for 040 30 options FPSP # MC68040 floating point support 31 options M68030 # support for 030 32 options M68020 # support for 020/851 33 options FPU_EMULATE # FPU emulation 34 # 35 # Networking options 36 # 37 options INET # IP networking support (Required) 38 options PPP_BSDCOMP # BSD-Compress compression support for PPP 39 options PPP_DEFLATE # Deflate compression support for PPP 40 options PPP_FILTER # Active filter support for PPP (requires bpf) 41 42 # Filesystems 43 file-system FFS # Berkeley fast file system 44 file-system MFS # Memory based filesystem 45 file-system NFS # Network File System client side code 46 file-system ADOSFS # AmigaDOS file system 47 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 48 file-system MSDOSFS # MS-DOS filesystem 49 file-system KERNFS # kernel data-structure filesystem 50 file-system PTYFS # /dev/pts/N support 51 52 options FFS_NO_SNAPSHOT # No FFS snapshot support 53 54 # 55 # Support for various kernel options 56 # 57 options KTRACE # system call tracing support 58 #options INSECURE # disable kernel security levels 59 options SCSIVERBOSE # human readable SCSI error messages 60 options NTP # NTP phase/frequency locked loop 61 options USERCONF # userconf(4) support 62 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 63 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 64 options MALLOC_NOINLINE # Not inlining MALLOC saves memory 65 66 # 67 # Misc. debugging options 68 # 69 options DDB # Kernel debugger 70 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 71 options DIAGNOSTIC # Extra kernel sanity checks 72 #options DEBUG # Enable misc. kernel debugging code 73 #options SYSCALL_DEBUG # debug all syscalls. 74 #options SCSIDEBUG # Add SCSI debugging statements 75 #options PANICBUTTON # Forced crash via keypress (?) 76 77 # 78 # Amiga specific options 79 # 80 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 81 # first bank of RAM. (default: unlimited) 82 #options NKPTADD=4 # set this for 4 additional KPT pages 83 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 84 # per 16 MB (1<<24 bytes) of RAM 85 # define and decrease this, or define and 86 # increase NKPTADD if you get "out of PT pages" 87 # panics. 88 89 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 90 # before the 10 secondinterval ends, or that KBDRESET does work at all. 91 #options KBDRESET # sync on Ctrl-Amiga-Amiga 92 93 # These options improve performance with the built-in serial port 94 # on slower Amigas. Try the larger buffers first then lev6_defer. 95 #options SERIBUF_SIZE=4096 96 #options SEROBUF_SIZE=32 97 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 98 99 options RETINACONSOLE # enable code to allow retina to be console 100 options ULOWELLCONSOLE # enable code to allow a2410 to be console 101 options CL5426CONSOLE # Cirrus console 102 options CV64CONSOLE # CyberVision console 103 options TSENGCONSOLE # Tseng console 104 options CV3DCONSOLE # CyberVision 64/3D console 105 106 options GRF_ECS # Enhanced Chip Set 107 options GRF_NTSC # NTSC 108 options GRF_PAL # PAL 109 options GRF_A2024 # Support for the A2024 110 options GRF_AGA # AGA Chip Set 111 options GRF_AGA_VGA # AGA VGAONLY timing 112 options GRF_SUPER72 # AGA Super-72 113 #options KFONT_8X11 # 8x11 font 114 115 # select a font for the console according to the character set and keymap 116 # you want to use 117 options KFONT_CONS_ISO8859_1 118 #options KFONT_CONS_ISO8859_2 119 120 # This is how you would tell the kernel the A2410 oscillator frequencies: 121 # The used frequencies are the defaults, and do not need option setting 122 #options ULOWELL_OSC1=36000000 123 #options ULOWELL_OSC2=66667000 124 125 # This is how you specify the blitting speed, higher values may speed up blits 126 # a littel bit. If you raise this value too much some trash may appear. 127 # the commented version is the default. 128 #options RH_MEMCLK=61000000 129 # this option enables the 64 bit sprite which does not work 130 # for quite a few people. E.g. The cursor sprite will turn to a block 131 # when moved to the top of the screen in X. 132 #options RH_64BIT_SPRITE 133 # enables fast scroll code appears to now work on 040 systems. 134 #options RETINA_SPEED_HACK 135 # enables the Hardwarecursor which does not work on some systems. 136 #options RH_HARDWARECURSOR 137 138 grfcc0 at mainbus0 # custom chips 139 grfrt0 at zbus0 # retina II 140 grfrh0 at zbus0 # retina III 141 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 142 grful0 at zbus0 # A2410 143 grfcv0 at zbus0 # CyberVision 64 144 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 145 grfcv3d0 at zbus0 # CyberVision 64/3D 146 147 grf0 at grfcc0 148 grf1 at grfrt0 149 grf2 at grfrh0 150 grf3 at grfcl? 151 grf4 at grful0 152 grf5 at grfcv0 153 grf6 at grfet? 154 grf7 at grfcv3d0 155 156 ite0 at grf0 # terminal emulators for grfs 157 ite1 at grf1 # terminal emulators for grfs 158 ite2 at grf2 # terminal emulators for grfs 159 ite3 at grf3 # terminal emulators for grfs 160 ite4 at grf4 # terminal emulators for grfs 161 ite5 at grf5 # terminal emulators for grfs 162 ite6 at grf6 # terminal emulators for grfs 163 ite7 at grf7 # terminal emulators for grfs 164 165 msc0 at zbus0 # A2232 MSC multiport serial. 166 mfc0 at zbus0 # MultiFaceCard I/O board 167 mfcs0 at mfc0 unit 0 # MFC serial 168 mfcs1 at mfc0 unit 1 # MFC serial 169 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 170 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 171 #mfcs2 at mfc1 unit 0 172 #mfcs3 at mfc1 unit 1 173 #mfcp1 at mfc1 unit 0 174 175 hyper* at zbus? # zbus HyperCom3 + HyperCom4 176 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 177 com* at hyper? port ? # Hypercom3/4 serial ports 178 #lpt* at hyper? port ? # not yet: Hypercom3 parallel port 179 180 # 181 # Amiga Mainboard devices (sans graphics and keyboard) 182 # 183 184 ser0 at mainbus0 # Amiga onboard serial 185 par0 at mainbus0 # Amiga onboard parallel 186 ms* at mainbus0 # Amiga mice 187 fdc0 at mainbus0 # Amiga FDC 188 fd* at fdc0 unit ? # floppy disks on the later 189 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 190 a2kbbc0 at mainbus0 # A2000 battery backed clock 191 aucc* at mainbus0 # Amiga CC audio 192 audio* at aucc? 193 194 # 195 # DraCo Mainboard devices (sans keyboard) 196 # 197 198 drbbc0 at mainbus0 # DraCo battery backed clock 199 drsupio0 at mainbus0 # DraCo superio chip 200 com* at drsupio? port ? # DraCo serial 201 lpt0 at drsupio? port ? # DraCo parallel 202 203 # 204 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 205 # 206 207 # Ethernet cards: 208 le* at zbus0 # A2065, Ameristar, Ariadne 209 ne* at zbus0 # AriadneII 210 ed* at zbus0 # Hydra, ASDG LanRover 211 es* at zbus0 # CEI A4066 EthernetPLUS 212 qn* at zbus0 # Quicknet 213 214 # Arcnet 215 bah* at zbus0 # C=/Ameristar A2060 / 560 216 217 # Greater Valley Product Bus 218 gvpbus* at zbus0 219 220 # scsi stuff, all possible 221 gtsc0 at gvpbus? # GVP series II scsi 222 scsibus* at gtsc0 223 ahsc0 at mainbus0 # A3000 scsi 224 scsibus* at ahsc0 225 atzsc0 at zbus0 # A2091 scsi 226 scsibus* at atzsc0 227 wstsc0 at zbus0 # Wordsync II scsi 228 scsibus* at wstsc0 229 ivsc0 at zbus0 # IVS scsi 230 scsibus* at ivsc0 231 mlhsc0 at zbus0 # Hacker scsi 232 scsibus* at mlhsc0 233 otgsc0 at zbus0 # 12 gauge scsi 234 scsibus* at otgsc0 235 zssc0 at zbus0 # Zeus scsi 236 scsibus* at zssc0 237 mgnsc0 at zbus0 # Magnum scsi 238 scsibus* at mgnsc0 239 wesc0 at zbus0 # Warp Engine scsi 240 scsibus* at wesc0 241 afsc0 at zbus0 # A4091 scsi 242 scsibus* at afsc0 243 aftsc0 at mainbus0 # A4000T scsi 244 scsibus* at aftsc0 245 flsc0 at zbus0 # FastlaneZ3 scsi 246 scsibus* at flsc0 247 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 248 scsibus* at bzsc0 249 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 250 scsibus* at bzivsc0 251 bztzsc0 at zbus0 # Blizzard 2060 scsi 252 scsibus* at bztzsc0 253 cbsc0 at zbus0 # CyberSCSI I 254 scsibus* at cbsc0 255 cbiisc0 at zbus0 # CyberSCSI II 256 scsibus* at cbiisc0 257 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 258 scsibus* at cbiiisc0 259 empsc0 at zbus0 # Emplant scsi 260 scsibus* at empsc0 261 wdc0 at mainbus0 # A4000 & A1200 IDE bus 262 atabus* at wdc? channel ? # ATA bus 263 wd* at atabus? drive ? # + drives 264 atapibus* at atabus? # ATAPI bus 265 cd* at atapibus? drive ? # ATAPI CD-ROM drives 266 sd* at atapibus? drive ? # ATAPI disk drives 267 268 drsc0 at mainbus0 # DraCo scsi 269 scsibus* at drsc0 270 271 272 # each hard drive from low target to high 273 # will configure to the next available sd unit number 274 sd* at scsibus? target ? lun ? # scsi disks 275 st* at scsibus? target ? lun ? # scsi tapes 276 cd* at scsibus? target ? lun ? # scsi cds 277 278 pseudo-device loop # loopback network interface 279 pseudo-device sl 1 # SLIP network interfaces 280 pseudo-device ppp 1 # PPP network interfaces 281 282 pseudo-device view 10 # views 283 pseudo-device pty # pseudo-terminals 284 285 pseudo-device vnd 4 # vnode pseudo-disks 286 287 # rnd is EXPERIMENTAL at this point. 288 #pseudo-device rnd # /dev/random and in-kernel generator 289 #options RND_COM # use "com" randomness as well (BROKEN) 290 291 config netbsd root on ? type ? 292 293 # Enable the hooks used for initializing the root memory-disk. 294 options MEMORY_DISK_HOOKS 295 options MEMORY_DISK_IS_ROOT # force root on memory disk 296 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 297 options MEMORY_DISK_ROOT_SIZE=2048 # size of memory disk, in blocks 298 299 pseudo-device md 1 # memory disk [ramdisk] 300
Indexes created Sat Oct 25 16:10:12 GMT 2025