MDINSTALL revision 1.21.6.1 1 # $NetBSD: MDINSTALL,v 1.21.6.1 2006/06/21 14:48:25 yamt Exp $
2
3 #
4 # INSTALL kernel for ramdisk installation
5 #
6
7 include "arch/amiga/conf/std.amiga"
8
9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
10
11 maxusers 8
12 options RTC_OFFSET=0
13
14 #
15 # mainboards to support (in addition to Amiga)
16 #
17 options DRACO
18 options BB060STUPIDROM # You need this, if you have a non-DraCo
19 # MC68060 with an OS ROM up to (at least)
20 # V40 (OS3.1) and want to boot with the
21 # bootblock.
22 # You do not need this if you have a DraCo,
23 # have no 68060 or NEVER use the bootblock
24 #
25 # processors this kernel should support
26 #
27 options M68060 # support for 060
28 options M060SP # MC68060 software support (Required for 060)
29 options M68040 # support for 040
30 options FPSP # MC68040 floating point support
31 options M68030 # support for 030
32 options M68020 # support for 020/851
33 options FPU_EMULATE # FPU emulation
34 #
35 # Networking options
36 #
37 options INET # IP networking support (Required)
38 options PPP_BSDCOMP # BSD-Compress compression support for PPP
39 options PPP_DEFLATE # Deflate compression support for PPP
40 options PPP_FILTER # Active filter support for PPP (requires bpf)
41
42 # Filesystems
43 file-system FFS # Berkeley fast file system
44 file-system MFS # Memory based filesystem
45 file-system NFS # Network File System client side code
46 file-system ADOSFS # AmigaDOS file system
47 file-system CD9660 # ISO 9660 + Rock Ridge filesystem
48 file-system MSDOSFS # MS-DOS filesystem
49 file-system KERNFS # kernel data-structure filesystem
50 file-system PTYFS # /dev/pts/N support
51
52 options FFS_NO_SNAPSHOT # No FFS snapshot support
53
54 #
55 # Support for various kernel options
56 #
57 options KTRACE # system call tracing support
58 #options INSECURE # disable kernel security levels
59 options SCSIVERBOSE # human readable SCSI error messages
60 options NTP # NTP phase/frequency locked loop
61 options USERCONF # userconf(4) support
62 options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
63 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
64 options MALLOC_NOINLINE # Not inlining MALLOC saves memory
65
66 #
67 # Misc. debugging options
68 #
69 options DDB # Kernel debugger
70 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
71 options DIAGNOSTIC # Extra kernel sanity checks
72 #options DEBUG # Enable misc. kernel debugging code
73 #options SYSCALL_DEBUG # debug all syscalls.
74 #options SCSIDEBUG # Add SCSI debugging statements
75 #options PANICBUTTON # Forced crash via keypress (?)
76
77 #
78 # Amiga specific options
79 #
80 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
81 # first bank of RAM. (default: unlimited)
82 #options NKPTADD=4 # set this for 4 additional KPT pages
83 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page
84 # per 16 MB (1<<24 bytes) of RAM
85 # define and decrease this, or define and
86 # increase NKPTADD if you get "out of PT pages"
87 # panics.
88
89 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
90 # before the 10 secondinterval ends, or that KBDRESET does work at all.
91 #options KBDRESET # sync on Ctrl-Amiga-Amiga
92
93 # These options improve performance with the built-in serial port
94 # on slower Amigas. Try the larger buffers first then lev6_defer.
95 #options SERIBUF_SIZE=4096
96 #options SEROBUF_SIZE=32
97 #options LEV6_DEFER # defers l6 to l4 (below serial l5)
98
99 options RETINACONSOLE # enable code to allow retina to be console
100 options ULOWELLCONSOLE # enable code to allow a2410 to be console
101 options CL5426CONSOLE # Cirrus console
102 options CV64CONSOLE # CyberVision console
103 options TSENGCONSOLE # Tseng console
104 options CV3DCONSOLE # CyberVision 64/3D console
105
106 options GRF_ECS # Enhanced Chip Set
107 options GRF_NTSC # NTSC
108 options GRF_PAL # PAL
109 options GRF_A2024 # Support for the A2024
110 options GRF_AGA # AGA Chip Set
111 options GRF_AGA_VGA # AGA VGAONLY timing
112 options GRF_SUPER72 # AGA Super-72
113 #options KFONT_8X11 # 8x11 font
114
115 # select a font for the console according to the character set and keymap
116 # you want to use
117 options KFONT_CONS_ISO8859_1
118 #options KFONT_CONS_ISO8859_2
119
120 # This is how you would tell the kernel the A2410 oscillator frequencies:
121 # The used frequencies are the defaults, and do not need option setting
122 #options ULOWELL_OSC1=36000000
123 #options ULOWELL_OSC2=66667000
124
125 # This is how you specify the blitting speed, higher values may speed up blits
126 # a littel bit. If you raise this value too much some trash may appear.
127 # the commented version is the default.
128 #options RH_MEMCLK=61000000
129 # this option enables the 64 bit sprite which does not work
130 # for quite a few people. E.g. The cursor sprite will turn to a block
131 # when moved to the top of the screen in X.
132 #options RH_64BIT_SPRITE
133 # enables fast scroll code appears to now work on 040 systems.
134 #options RETINA_SPEED_HACK
135 # enables the Hardwarecursor which does not work on some systems.
136 #options RH_HARDWARECURSOR
137
138 grfcc0 at mainbus0 # custom chips
139 grfrt0 at zbus0 # retina II
140 grfrh0 at zbus0 # retina III
141 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum
142 grful0 at zbus0 # A2410
143 grfcv0 at zbus0 # CyberVision 64
144 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
145 grfcv3d0 at zbus0 # CyberVision 64/3D
146
147 grf0 at grfcc0
148 grf1 at grfrt0
149 grf2 at grfrh0
150 grf3 at grfcl?
151 grf4 at grful0
152 grf5 at grfcv0
153 grf6 at grfet?
154 grf7 at grfcv3d0
155
156 ite0 at grf0 # terminal emulators for grfs
157 ite1 at grf1 # terminal emulators for grfs
158 ite2 at grf2 # terminal emulators for grfs
159 ite3 at grf3 # terminal emulators for grfs
160 ite4 at grf4 # terminal emulators for grfs
161 ite5 at grf5 # terminal emulators for grfs
162 ite6 at grf6 # terminal emulators for grfs
163 ite7 at grf7 # terminal emulators for grfs
164
165 msc0 at zbus0 # A2232 MSC multiport serial.
166 mfc0 at zbus0 # MultiFaceCard I/O board
167 mfcs0 at mfc0 unit 0 # MFC serial
168 mfcs1 at mfc0 unit 1 # MFC serial
169 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
170 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board
171 #mfcs2 at mfc1 unit 0
172 #mfcs3 at mfc1 unit 1
173 #mfcp1 at mfc1 unit 0
174
175 hyper* at zbus? # zbus HyperCom3 + HyperCom4
176 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
177 com* at hyper? port ? # Hypercom3/4 serial ports
178 #lpt* at hyper? port ? # not yet: Hypercom3 parallel port
179
180 #
181 # Amiga Mainboard devices (sans graphics and keyboard)
182 #
183
184 ser0 at mainbus0 # Amiga onboard serial
185 par0 at mainbus0 # Amiga onboard parallel
186 ms* at mainbus0 # Amiga mice
187 fdc0 at mainbus0 # Amiga FDC
188 fd* at fdc0 unit ? # floppy disks on the later
189 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
190 a2kbbc0 at mainbus0 # A2000 battery backed clock
191 aucc* at mainbus0 # Amiga CC audio
192 audio* at aucc?
193
194 #
195 # DraCo Mainboard devices (sans keyboard)
196 #
197
198 drbbc0 at mainbus0 # DraCo battery backed clock
199 drsupio0 at mainbus0 # DraCo superio chip
200 com* at drsupio? port ? # DraCo serial
201 lpt0 at drsupio? port ? # DraCo parallel
202
203 #
204 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
205 #
206
207 # Ethernet cards:
208 le* at zbus0 # A2065, Ameristar, Ariadne
209 ne* at zbus0 # AriadneII
210 ed* at zbus0 # Hydra, ASDG LanRover
211 es* at zbus0 # CEI A4066 EthernetPLUS
212 qn* at zbus0 # Quicknet
213
214 # Arcnet
215 bah* at zbus0 # C=/Ameristar A2060 / 560
216
217 # Greater Valley Product Bus
218 gvpbus* at zbus0
219
220 # scsi stuff, all possible
221 gtsc0 at gvpbus? # GVP series II scsi
222 scsibus* at gtsc0
223 ahsc0 at mainbus0 # A3000 scsi
224 scsibus* at ahsc0
225 atzsc0 at zbus0 # A2091 scsi
226 scsibus* at atzsc0
227 wstsc0 at zbus0 # Wordsync II scsi
228 scsibus* at wstsc0
229 ivsc0 at zbus0 # IVS scsi
230 scsibus* at ivsc0
231 mlhsc0 at zbus0 # Hacker scsi
232 scsibus* at mlhsc0
233 otgsc0 at zbus0 # 12 gauge scsi
234 scsibus* at otgsc0
235 zssc0 at zbus0 # Zeus scsi
236 scsibus* at zssc0
237 mgnsc0 at zbus0 # Magnum scsi
238 scsibus* at mgnsc0
239 wesc0 at zbus0 # Warp Engine scsi
240 scsibus* at wesc0
241 afsc0 at zbus0 # A4091 scsi
242 scsibus* at afsc0
243 aftsc0 at mainbus0 # A4000T scsi
244 scsibus* at aftsc0
245 flsc0 at zbus0 # FastlaneZ3 scsi
246 scsibus* at flsc0
247 bzsc0 at zbus0 # Blizzard 1230 I,II scsi
248 scsibus* at bzsc0
249 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
250 scsibus* at bzivsc0
251 bztzsc0 at zbus0 # Blizzard 2060 scsi
252 scsibus* at bztzsc0
253 cbsc0 at zbus0 # CyberSCSI I
254 scsibus* at cbsc0
255 cbiisc0 at zbus0 # CyberSCSI II
256 scsibus* at cbiisc0
257 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
258 scsibus* at cbiiisc0
259 empsc0 at zbus0 # Emplant scsi
260 scsibus* at empsc0
261 wdc0 at mainbus0 # A4000 & A1200 IDE bus
262 atabus* at wdc? channel ? # ATA bus
263 wd* at atabus? drive ? # + drives
264 atapibus* at atabus? # ATAPI bus
265 cd* at atapibus? drive ? # ATAPI CD-ROM drives
266 sd* at atapibus? drive ? # ATAPI disk drives
267
268 drsc0 at mainbus0 # DraCo scsi
269 scsibus* at drsc0
270
271
272 # each hard drive from low target to high
273 # will configure to the next available sd unit number
274 sd* at scsibus? target ? lun ? # scsi disks
275 st* at scsibus? target ? lun ? # scsi tapes
276 cd* at scsibus? target ? lun ? # scsi cds
277
278 pseudo-device loop # loopback network interface
279 pseudo-device sl # SLIP network interfaces
280 pseudo-device ppp # PPP network interfaces
281
282 pseudo-device view 10 # views
283 pseudo-device pty # pseudo-terminals
284
285 pseudo-device vnd # vnode pseudo-disks
286
287 # rnd is EXPERIMENTAL at this point.
288 #pseudo-device rnd # /dev/random and in-kernel generator
289 #options RND_COM # use "com" randomness as well (BROKEN)
290
291 config netbsd root on ? type ?
292
293 # Enable the hooks used for initializing the root memory-disk.
294 options MEMORY_DISK_HOOKS
295 options MEMORY_DISK_IS_ROOT # force root on memory disk
296 options MEMORY_DISK_SERVER=0 # no userspace memory disk support
297 options MEMORY_DISK_ROOT_SIZE=2048 # size of memory disk, in blocks
298
299 pseudo-device md 1 # memory disk [ramdisk]
300