MDINSTALL revision 1.23
1#	$NetBSD: MDINSTALL,v 1.23 2005/12/07 12:22:29 tsutsui Exp $
2
3#
4# INSTALL kernel for ramdisk installation
5#
6
7include "arch/amiga/conf/std.amiga"
8
9#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
10
11maxusers	8
12options 	RTC_OFFSET=0
13
14#
15# mainboards to support (in addition to Amiga)
16#
17options 	DRACO
18options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
19				# MC68060 with an OS ROM up to (at least)
20				# V40 (OS3.1) and want to boot with the
21				# bootblock.
22				# You do not need this if you have a DraCo,
23				# have no 68060 or NEVER use the bootblock
24#
25# processors this kernel should support
26#
27options 	M68060		# support for 060
28options 	M060SP		# MC68060 software support (Required for 060)
29options 	M68040		# support for 040
30options 	FPSP		# MC68040 floating point support
31options 	M68030		# support for 030
32options 	M68020		# support for 020/851
33options 	FPU_EMULATE	# FPU emulation
34#
35# Networking options
36#
37options 	INET		# IP networking support (Required)
38options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
39options 	PPP_DEFLATE	# Deflate compression support for PPP
40options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
41
42# Filesystems
43file-system 	FFS		# Berkeley fast file system
44file-system 	MFS		# Memory based filesystem
45file-system 	NFS		# Network File System client side code
46file-system 	ADOSFS		# AmigaDOS file system
47file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
48file-system 	MSDOSFS		# MS-DOS filesystem
49file-system 	KERNFS		# kernel data-structure filesystem
50file-system	PTYFS		# /dev/pts/N support
51
52options 	VNODE_OP_NOINLINE	# Not inlining vnode op calls saves mem
53options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
54
55#
56# Support for various kernel options
57#
58options 	KTRACE		# system call tracing support
59#options 	INSECURE	# disable kernel security levels
60options 	SCSIVERBOSE	# human readable SCSI error messages
61options 	NTP		# NTP phase/frequency locked loop
62options 	USERCONF	# userconf(4) support
63options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
64#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
65options 	MALLOC_NOINLINE		# Not inlining MALLOC saves memory
66
67#
68# Misc. debugging options
69#
70options 	DDB		# Kernel debugger
71#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
72options 	DIAGNOSTIC	# Extra kernel sanity checks
73#options 	DEBUG		# Enable misc. kernel debugging code
74#options 	SYSCALL_DEBUG	# debug all syscalls.
75#options 	SCSIDEBUG	# Add SCSI debugging statements
76#options 	PANICBUTTON	# Forced crash via keypress (?)
77
78#
79# Amiga specific options
80#
81#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
82				# first bank of RAM. (default: unlimited)
83#options 	NKPTADD=4	# set this for 4 additional KPT pages
84#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
85				# per 16 MB (1<<24 bytes) of RAM
86				# define and decrease this, or define and
87				# increase NKPTADD if you get "out of PT pages"
88				# panics.
89
90# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
91# before the 10 secondinterval ends, or that KBDRESET does work at all.
92#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
93
94# These options improve performance with the built-in serial port
95# on slower Amigas.  Try the larger buffers first then lev6_defer.
96#options 	SERIBUF_SIZE=4096
97#options 	SEROBUF_SIZE=32
98#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
99
100options 	RETINACONSOLE	# enable code to allow retina to be console
101options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
102options 	CL5426CONSOLE	# Cirrus console
103options 	CV64CONSOLE	# CyberVision console
104options 	TSENGCONSOLE	# Tseng console
105options 	CV3DCONSOLE	# CyberVision 64/3D console
106
107options 	GRF_ECS		# Enhanced Chip Set
108options 	GRF_NTSC	# NTSC
109options 	GRF_PAL		# PAL
110options 	GRF_A2024	# Support for the A2024
111options 	GRF_AGA		# AGA Chip Set
112options 	GRF_AGA_VGA	# AGA VGAONLY timing
113options 	GRF_SUPER72	# AGA Super-72
114#options 	KFONT_8X11	# 8x11 font
115
116# select a font for the console according to the character set and keymap
117# you want to use
118options        KFONT_CONS_ISO8859_1
119#options         KFONT_CONS_ISO8859_2
120
121# This is how you would tell the kernel the A2410 oscillator frequencies:
122# The used frequencies are the defaults, and do not need option setting
123#options 	ULOWELL_OSC1=36000000
124#options 	ULOWELL_OSC2=66667000
125
126# This is how you specify the blitting speed, higher values may speed up blits
127# a littel bit.  If you raise this value too much some trash may appear.
128# the commented version is the default.
129#options 	RH_MEMCLK=61000000
130# this option enables the 64 bit sprite which does not work
131# for quite a few people.  E.g. The cursor sprite will turn to a block
132# when moved to the top of the screen in X.
133#options 	RH_64BIT_SPRITE
134# enables fast scroll code appears to now work on 040 systems.
135#options 	RETINA_SPEED_HACK
136# enables the Hardwarecursor which does not work on some systems.
137#options 	RH_HARDWARECURSOR
138
139grfcc0		at mainbus0		# custom chips
140grfrt0		at zbus0		# retina II
141grfrh0		at zbus0		# retina III
142grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
143grful0		at zbus0		# A2410
144grfcv0		at zbus0		# CyberVision 64
145grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
146grfcv3d0	at zbus0		# CyberVision 64/3D
147
148grf0		at grfcc0
149grf1		at grfrt0
150grf2		at grfrh0
151grf3		at grfcl?
152grf4		at grful0
153grf5		at grfcv0
154grf6		at grfet?
155grf7		at grfcv3d0
156
157ite0		at grf0			# terminal emulators for grfs
158ite1		at grf1			# terminal emulators for grfs
159ite2		at grf2			# terminal emulators for grfs
160ite3		at grf3			# terminal emulators for grfs
161ite4		at grf4			# terminal emulators for grfs
162ite5		at grf5			# terminal emulators for grfs
163ite6		at grf6			# terminal emulators for grfs
164ite7		at grf7			# terminal emulators for grfs
165
166msc0		at zbus0		# A2232 MSC multiport serial.
167mfc0		at zbus0		# MultiFaceCard I/O board
168mfcs0		at mfc0 unit 0		# MFC serial
169mfcs1		at mfc0 unit 1		# MFC serial
170#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
171#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
172#mfcs2		at mfc1 unit 0
173#mfcs3		at mfc1 unit 1
174#mfcp1		at mfc1 unit 0
175
176hyper*		at zbus?		# zbus HyperCom3 + HyperCom4
177#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
178com*		at hyper? port ?	# Hypercom3/4 serial ports
179#lpt*		at hyper? port ?	# not yet: Hypercom3 parallel port
180
181#
182# Amiga Mainboard devices (sans graphics and keyboard)
183#
184
185ser0		at mainbus0		# Amiga onboard serial
186par0		at mainbus0		# Amiga onboard parallel
187ms*		at mainbus0		# Amiga mice
188fdc0		at mainbus0		# Amiga FDC
189fd*		at fdc0 unit ?		# floppy disks on the later
190a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
191a2kbbc0 	at mainbus0		# A2000 battery backed clock
192aucc*		at mainbus0		# Amiga CC audio
193audio*		at aucc?
194
195#
196# DraCo Mainboard devices (sans keyboard)
197#
198
199drbbc0		at mainbus0		# DraCo battery backed clock
200drsupio0	at mainbus0		# DraCo superio chip
201com*		at drsupio? port ?	# DraCo serial
202lpt0		at drsupio? port ?	# DraCo parallel
203
204#
205# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
206#
207
208# Ethernet cards:
209le*		at zbus0		# A2065, Ameristar, Ariadne
210ne*		at zbus0		# AriadneII
211ed*		at zbus0		# Hydra, ASDG LanRover
212es*		at zbus0		# CEI A4066 EthernetPLUS
213qn*		at zbus0		# Quicknet
214
215# Arcnet
216bah*		at zbus0		# C=/Ameristar A2060 / 560
217
218# Greater Valley Product Bus
219gvpbus* 	at zbus0
220
221# scsi stuff, all possible
222gtsc0		at gvpbus?		# GVP series II scsi
223scsibus*	at gtsc0
224ahsc0		at mainbus0		# A3000 scsi
225scsibus*	at ahsc0
226atzsc0		at zbus0		# A2091 scsi
227scsibus*	at atzsc0
228wstsc0		at zbus0		# Wordsync II scsi
229scsibus*	at wstsc0
230ivsc0		at zbus0		# IVS scsi
231scsibus*	at ivsc0
232mlhsc0		at zbus0		# Hacker scsi
233scsibus*	at mlhsc0
234otgsc0		at zbus0		# 12 gauge scsi
235scsibus*	at otgsc0
236zssc0		at zbus0		# Zeus scsi
237scsibus*	at zssc0
238mgnsc0		at zbus0		# Magnum scsi
239scsibus*	at mgnsc0
240wesc0		at zbus0		# Warp Engine scsi
241scsibus*	at wesc0
242afsc0		at zbus0		# A4091 scsi
243scsibus*	at afsc0
244aftsc0		at mainbus0		# A4000T scsi
245scsibus*	at aftsc0
246flsc0		at zbus0		# FastlaneZ3 scsi
247scsibus*	at flsc0
248bzsc0		at zbus0		# Blizzard 1230 I,II scsi
249scsibus*	at bzsc0
250bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
251scsibus*	at bzivsc0
252bztzsc0 	at zbus0		# Blizzard 2060 scsi
253scsibus*	at bztzsc0
254cbsc0		at zbus0		# CyberSCSI I
255scsibus*	at cbsc0
256cbiisc0 	at zbus0		# CyberSCSI II
257scsibus*	at cbiisc0
258cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
259scsibus*	at cbiiisc0
260empsc0		at zbus0		# Emplant scsi
261scsibus*	at empsc0
262wdc0            at mainbus0             # A4000 & A1200 IDE bus
263atabus*         at wdc? channel ?       # ATA bus 
264wd*             at atabus? drive ?      #  + drives
265atapibus*       at atabus?              # ATAPI bus
266cd*             at atapibus? drive ?    # ATAPI CD-ROM drives
267sd*             at atapibus? drive ?    # ATAPI disk drives
268
269drsc0		at mainbus0		# DraCo scsi
270scsibus*	at drsc0
271
272
273# each hard drive from low target to high
274# will configure to the next available sd unit number
275sd*	at scsibus? target ? lun ?	# scsi disks
276st*	at scsibus? target ? lun ?	# scsi tapes
277cd*	at scsibus? target ? lun ?	# scsi cds
278
279pseudo-device	loop			# loopback network interface
280pseudo-device	sl		1	# SLIP network interfaces
281pseudo-device	ppp		1	# PPP network interfaces
282
283pseudo-device	view		10	# views
284pseudo-device	pty			# pseudo-terminals
285
286pseudo-device	vnd		4	# vnode pseudo-disks
287
288# rnd is EXPERIMENTAL at this point.
289#pseudo-device	rnd			# /dev/random and in-kernel generator
290#options 	RND_COM			# use "com" randomness as well (BROKEN)
291
292config	netbsd root on ? type ?
293
294# Enable the hooks used for initializing the root memory-disk.
295options 	MEMORY_DISK_HOOKS
296options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
297options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
298options 	MEMORY_DISK_ROOT_SIZE=2048	# size of memory disk, in blocks
299
300pseudo-device	md		1	# memory disk [ramdisk]
301