MDINSTALL revision 1.29.8.2
1 # $NetBSD: MDINSTALL,v 1.29.8.2 2014/05/22 11:39:28 yamt Exp $ 2 3 # 4 # INSTALL kernel for ramdisk installation 5 # 6 7 include "arch/amiga/conf/std.amiga" 8 9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11 maxusers 8 12 options RTC_OFFSET=0 13 14 # 15 # mainboards to support (in addition to Amiga) 16 # 17 options DRACO 18 options BB060STUPIDROM # You need this, if you have a non-DraCo 19 # MC68060 with an OS ROM up to (at least) 20 # V40 (OS3.1) and want to boot with the 21 # bootblock. 22 # You do not need this if you have a DraCo, 23 # have no 68060 or NEVER use the bootblock 24 # 25 # processors this kernel should support 26 # 27 options M68060 # support for 060 28 options M060SP # MC68060 software support (Required for 060) 29 options M68040 # support for 040 30 options FPSP # MC68040 floating point support 31 options M68030 # support for 030 32 options M68020 # support for 020/851 33 options FPU_EMULATE # FPU emulation 34 # 35 # Networking options 36 # 37 options INET # IP networking support (Required) 38 options PPP_BSDCOMP # BSD-Compress compression support for PPP 39 options PPP_DEFLATE # Deflate compression support for PPP 40 options PPP_FILTER # Active filter support for PPP (requires bpf) 41 42 # Filesystems 43 file-system FFS # Berkeley fast file system 44 file-system MFS # Memory based filesystem 45 file-system NFS # Network File System client side code 46 file-system ADOSFS # AmigaDOS file system 47 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 48 file-system MSDOSFS # MS-DOS filesystem 49 file-system KERNFS # kernel data-structure filesystem 50 file-system PTYFS # /dev/pts/N support 51 52 options FFS_NO_SNAPSHOT # No FFS snapshot support 53 54 # 55 # Support for various kernel options 56 # 57 options KTRACE # system call tracing support 58 #options INSECURE # disable kernel security levels 59 options SCSIVERBOSE # human readable SCSI error messages 60 options NTP # NTP phase/frequency locked loop 61 options USERCONF # userconf(4) support 62 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 63 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 64 65 # 66 # Misc. debugging options 67 # 68 options DDB # Kernel debugger 69 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 70 options DIAGNOSTIC # Extra kernel sanity checks 71 #options DEBUG # Enable misc. kernel debugging code 72 #options SYSCALL_DEBUG # debug all syscalls. 73 #options SCSIDEBUG # Add SCSI debugging statements 74 #options PANICBUTTON # Forced crash via keypress (?) 75 76 # 77 # Amiga specific options 78 # 79 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 80 # first bank of RAM. (default: unlimited) 81 82 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 83 # before the 10 secondinterval ends, or that KBDRESET does work at all. 84 #options KBDRESET # sync on Ctrl-Amiga-Amiga 85 86 # These options improve performance with the built-in serial port 87 # on slower Amigas. Try the larger buffers first then lev6_defer. 88 #options SERIBUF_SIZE=4096 89 #options SEROBUF_SIZE=32 90 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 91 92 options RETINACONSOLE # enable code to allow retina to be console 93 options ULOWELLCONSOLE # enable code to allow a2410 to be console 94 options CL5426CONSOLE # Cirrus console 95 options CV64CONSOLE # CyberVision console 96 options TSENGCONSOLE # Tseng console 97 options CV3DCONSOLE # CyberVision 64/3D console 98 99 options GRF_ECS # Enhanced Chip Set 100 options GRF_NTSC # NTSC 101 options GRF_PAL # PAL 102 options GRF_A2024 # Support for the A2024 103 options GRF_AGA # AGA Chip Set 104 options GRF_AGA_VGA # AGA VGAONLY timing 105 options GRF_SUPER72 # AGA Super-72 106 #options KFONT_8X11 # 8x11 font 107 108 # select a font for the console according to the character set and keymap 109 # you want to use 110 options KFONT_CONS_ISO8859_1 111 #options KFONT_CONS_ISO8859_2 112 113 # This is how you would tell the kernel the A2410 oscillator frequencies: 114 # The used frequencies are the defaults, and do not need option setting 115 #options ULOWELL_OSC1=36000000 116 #options ULOWELL_OSC2=66667000 117 118 # This is how you specify the blitting speed, higher values may speed up blits 119 # a littel bit. If you raise this value too much some trash may appear. 120 # the commented version is the default. 121 #options RH_MEMCLK=61000000 122 # this option enables the 64 bit sprite which does not work 123 # for quite a few people. E.g. The cursor sprite will turn to a block 124 # when moved to the top of the screen in X. 125 #options RH_64BIT_SPRITE 126 # enables fast scroll code appears to now work on 040 systems. 127 #options RETINA_SPEED_HACK 128 # enables the Hardwarecursor which does not work on some systems. 129 #options RH_HARDWARECURSOR 130 131 grfcc0 at mainbus0 # custom chips 132 grfrt0 at zbus0 # retina II 133 grfrh0 at zbus0 # retina III 134 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 135 grful0 at zbus0 # A2410 136 grfcv0 at zbus0 # CyberVision 64 137 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 138 grfcv3d0 at zbus0 # CyberVision 64/3D 139 140 grf0 at grfcc0 141 grf1 at grfrt0 142 grf2 at grfrh0 143 grf3 at grfcl? 144 grf4 at grful0 145 grf5 at grfcv0 146 grf6 at grfet? 147 grf7 at grfcv3d0 148 149 ite0 at grf0 # terminal emulators for grfs 150 ite1 at grf1 # terminal emulators for grfs 151 ite2 at grf2 # terminal emulators for grfs 152 ite3 at grf3 # terminal emulators for grfs 153 ite4 at grf4 # terminal emulators for grfs 154 ite5 at grf5 # terminal emulators for grfs 155 ite6 at grf6 # terminal emulators for grfs 156 ite7 at grf7 # terminal emulators for grfs 157 158 msc0 at zbus0 # A2232 MSC multiport serial. 159 mfc0 at zbus0 # MultiFaceCard I/O board 160 mfcs0 at mfc0 unit 0 # MFC serial 161 mfcs1 at mfc0 unit 1 # MFC serial 162 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 163 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 164 #mfcs2 at mfc1 unit 0 165 #mfcs3 at mfc1 unit 1 166 #mfcp1 at mfc1 unit 0 167 168 hyper* at zbus? # zbus HyperCom3 + HyperCom4 169 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 170 com* at hyper? port ? # Hypercom3/4 serial ports 171 #lpt* at hyper? port ? # not yet: Hypercom3 parallel port 172 173 # 174 # Amiga Mainboard devices (sans graphics and keyboard) 175 # 176 177 ser0 at mainbus0 # Amiga onboard serial 178 par0 at mainbus0 # Amiga onboard parallel 179 ms* at mainbus0 # Amiga mice 180 fdc0 at mainbus0 # Amiga FDC 181 fd* at fdc0 unit ? # floppy disks on the later 182 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 183 a2kbbc0 at mainbus0 # A2000 battery backed clock 184 aucc* at mainbus0 # Amiga CC audio 185 audio* at aucc? 186 187 # 188 # DraCo Mainboard devices (sans keyboard) 189 # 190 191 drbbc0 at mainbus0 # DraCo battery backed clock 192 drsupio0 at mainbus0 # DraCo superio chip 193 com* at drsupio? port ? # DraCo serial 194 lpt0 at drsupio? port ? # DraCo parallel 195 196 # 197 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 198 # 199 200 # Ethernet cards: 201 le* at zbus0 # A2065, Ameristar, Ariadne 202 ne* at zbus0 # AriadneII 203 ed* at zbus0 # Hydra, ASDG LanRover 204 es* at zbus0 # CEI A4066 EthernetPLUS 205 qn* at zbus0 # Quicknet 206 207 # Arcnet 208 bah* at zbus0 # C=/Ameristar A2060 / 560 209 210 # Greater Valley Product Bus 211 gvpbus* at zbus0 212 213 # scsi stuff, all possible 214 gtsc0 at gvpbus? # GVP series II scsi 215 scsibus* at gtsc0 216 ahsc0 at mainbus0 # A3000 scsi 217 scsibus* at ahsc0 218 atzsc0 at zbus0 # A2091 scsi 219 scsibus* at atzsc0 220 wstsc0 at zbus0 # Wordsync II scsi 221 scsibus* at wstsc0 222 ivsc0 at zbus0 # IVS scsi 223 scsibus* at ivsc0 224 mlhsc0 at zbus0 # Hacker scsi 225 scsibus* at mlhsc0 226 otgsc0 at zbus0 # 12 gauge scsi 227 scsibus* at otgsc0 228 zssc0 at zbus0 # Zeus scsi 229 scsibus* at zssc0 230 mgnsc0 at zbus0 # Magnum scsi 231 scsibus* at mgnsc0 232 wesc0 at zbus0 # Warp Engine scsi 233 scsibus* at wesc0 234 bppcsc0 at zbus0 # BlizzardPPC 603e+ scsi 235 scsibus* at bppcsc0 236 afsc0 at zbus0 # A4091 scsi 237 scsibus* at afsc0 238 aftsc0 at mainbus0 # A4000T scsi 239 scsibus* at aftsc0 240 flsc0 at zbus0 # FastlaneZ3 scsi 241 scsibus* at flsc0 242 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 243 scsibus* at bzsc0 244 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 245 scsibus* at bzivsc0 246 bztzsc0 at zbus0 # Blizzard 2060 scsi 247 scsibus* at bztzsc0 248 cbsc0 at zbus0 # CyberSCSI I 249 scsibus* at cbsc0 250 cbiisc0 at zbus0 # CyberSCSI II 251 scsibus* at cbiisc0 252 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 253 scsibus* at cbiiisc0 254 empsc0 at zbus0 # Emplant scsi 255 scsibus* at empsc0 256 wdc0 at mainbus0 # A4000 & A1200 IDE bus 257 atabus* at wdc? channel ? # ATA bus 258 wd* at atabus? drive ? # + drives 259 atapibus* at atabus? # ATAPI bus 260 cd* at atapibus? drive ? # ATAPI CD-ROM drives 261 sd* at atapibus? drive ? # ATAPI disk drives 262 263 drsc0 at mainbus0 # DraCo scsi 264 scsibus* at drsc0 265 266 267 # each hard drive from low target to high 268 # will configure to the next available sd unit number 269 sd* at scsibus? target ? lun ? # scsi disks 270 st* at scsibus? target ? lun ? # scsi tapes 271 cd* at scsibus? target ? lun ? # scsi cds 272 273 pseudo-device loop # loopback network interface 274 pseudo-device sl # SLIP network interfaces 275 pseudo-device ppp # PPP network interfaces 276 277 pseudo-device view 10 # views 278 pseudo-device pty # pseudo-terminals 279 280 pseudo-device vnd # vnode pseudo-disks 281 282 #options RND_COM # use "com" randomness as well (BROKEN) 283 284 config netbsd root on ? type ? 285 286 # Enable the hooks used for initializing the root memory-disk. 287 options MEMORY_DISK_HOOKS 288 options MEMORY_DISK_IS_ROOT # force root on memory disk 289 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 290 options MEMORY_DISK_ROOT_SIZE=2048 # size of memory disk, in blocks 291 options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode 292 293 pseudo-device md # memory disk [ramdisk] 294
Indexes created Sat Oct 25 16:10:12 GMT 2025