MDINSTALL revision 1.35
1 # $NetBSD: MDINSTALL,v 1.35 2016/12/13 20:42:16 christos Exp $ 2 3 # 4 # INSTALL kernel for ramdisk installation 5 # 6 7 include "arch/amiga/conf/std.amiga" 8 9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11 maxusers 8 12 options RTC_OFFSET=0 13 14 # 15 # mainboards to support (in addition to Amiga) 16 # 17 options DRACO 18 options BB060STUPIDROM # You need this, if you have a non-DraCo 19 # MC68060 with an OS ROM up to (at least) 20 # V40 (OS3.1) and want to boot with the 21 # bootblock. 22 # You do not need this if you have a DraCo, 23 # have no 68060 or NEVER use the bootblock 24 # 25 # processors this kernel should support 26 # 27 options M68060 # support for 060 28 options M060SP # MC68060 software support (Required for 060) 29 options M68040 # support for 040 30 options FPSP # MC68040 floating point support 31 options M68030 # support for 030 32 options M68020 # support for 020/851 33 options FPU_EMULATE # FPU emulation 34 # 35 # Networking options 36 # 37 options INET # IP networking support (Required) 38 options PPP_BSDCOMP # BSD-Compress compression support for PPP 39 options PPP_DEFLATE # Deflate compression support for PPP 40 options PPP_FILTER # Active filter support for PPP (requires bpf) 41 42 # Filesystems 43 file-system FFS # Berkeley fast file system 44 file-system MFS # Memory based filesystem 45 file-system NFS # Network File System client side code 46 file-system ADOSFS # AmigaDOS file system 47 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 48 file-system MSDOSFS # MS-DOS filesystem 49 file-system KERNFS # kernel data-structure filesystem 50 file-system PTYFS # /dev/pts/N support 51 52 options FFS_NO_SNAPSHOT # No FFS snapshot support 53 54 # 55 # Support for various kernel options 56 # 57 options KTRACE # system call tracing support 58 #options INSECURE # disable kernel security levels 59 options SCSIVERBOSE # human readable SCSI error messages 60 options NTP # NTP phase/frequency locked loop 61 options USERCONF # userconf(4) support 62 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 63 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 64 65 # 66 # Misc. debugging options 67 # 68 options DDB # Kernel debugger 69 pseudo-device ksyms 70 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 71 options DIAGNOSTIC # Extra kernel sanity checks 72 #options DEBUG # Enable misc. kernel debugging code 73 #options SYSCALL_DEBUG # debug all syscalls. 74 #options SCSIDEBUG # Add SCSI debugging statements 75 #options PANICBUTTON # Forced crash via keypress (?) 76 77 # 78 # Amiga specific options 79 # 80 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 81 # first bank of RAM. (default: unlimited) 82 83 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 84 # before the 10 secondinterval ends, or that KBDRESET does work at all. 85 #options KBDRESET # sync on Ctrl-Amiga-Amiga 86 87 # These options improve performance with the built-in serial port 88 # on slower Amigas. Try the larger buffers first then lev6_defer. 89 #options SERIBUF_SIZE=4096 90 #options SEROBUF_SIZE=32 91 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 92 93 options RETINACONSOLE # enable code to allow retina to be console 94 options ULOWELLCONSOLE # enable code to allow a2410 to be console 95 options CL5426CONSOLE # Cirrus console 96 options CV64CONSOLE # CyberVision console 97 options TSENGCONSOLE # Tseng console 98 options CV3DCONSOLE # CyberVision 64/3D console 99 100 options GRF_ECS # Enhanced Chip Set 101 options GRF_NTSC # NTSC 102 options GRF_PAL # PAL 103 options GRF_A2024 # Support for the A2024 104 options GRF_AGA # AGA Chip Set 105 options GRF_AGA_VGA # AGA VGAONLY timing 106 options GRF_SUPER72 # AGA Super-72 107 #options KFONT_8X11 # 8x11 font 108 109 # select a font for the console according to the character set and keymap 110 # you want to use 111 options KFONT_CONS_ISO8859_1 112 #options KFONT_CONS_ISO8859_2 113 114 # This is how you would tell the kernel the A2410 oscillator frequencies: 115 # The used frequencies are the defaults, and do not need option setting 116 #options ULOWELL_OSC1=36000000 117 #options ULOWELL_OSC2=66667000 118 119 # This is how you specify the blitting speed, higher values may speed up blits 120 # a littel bit. If you raise this value too much some trash may appear. 121 # the commented version is the default. 122 #options RH_MEMCLK=61000000 123 # this option enables the 64 bit sprite which does not work 124 # for quite a few people. E.g. The cursor sprite will turn to a block 125 # when moved to the top of the screen in X. 126 #options RH_64BIT_SPRITE 127 # enables fast scroll code appears to now work on 040 systems. 128 #options RETINA_SPEED_HACK 129 # enables the Hardwarecursor which does not work on some systems. 130 #options RH_HARDWARECURSOR 131 132 grfcc0 at mainbus0 # custom chips 133 grfrt0 at zbus0 # retina II 134 grfrh0 at zbus0 # retina III 135 grfcl* at zbus0 # Picasso II/Piccalo/Spectrum 136 grful0 at zbus0 # A2410 137 grfcv0 at zbus0 # CyberVision 64 138 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 139 grfcv3d0 at zbus0 # CyberVision 64/3D 140 141 grf0 at grfcc0 142 grf1 at grfrt0 143 grf2 at grfrh0 144 grf3 at grfcl? 145 grf4 at grful0 146 grf5 at grfcv0 147 grf6 at grfet? 148 grf7 at grfcv3d0 149 150 ite0 at grf0 # terminal emulators for grfs 151 ite1 at grf1 # terminal emulators for grfs 152 ite2 at grf2 # terminal emulators for grfs 153 ite3 at grf3 # terminal emulators for grfs 154 ite4 at grf4 # terminal emulators for grfs 155 ite5 at grf5 # terminal emulators for grfs 156 ite6 at grf6 # terminal emulators for grfs 157 ite7 at grf7 # terminal emulators for grfs 158 159 msc0 at zbus0 # A2232 MSC multiport serial. 160 mfc0 at zbus0 # MultiFaceCard I/O board 161 mfcs0 at mfc0 unit 0 # MFC serial 162 mfcs1 at mfc0 unit 1 # MFC serial 163 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 164 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 165 #mfcs2 at mfc1 unit 0 166 #mfcs3 at mfc1 unit 1 167 #mfcp1 at mfc1 unit 0 168 169 hyper* at zbus? # zbus HyperCom3 + HyperCom4 170 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 171 com* at hyper? port ? # Hypercom3/4 serial ports 172 #lpt* at hyper? port ? # not yet: Hypercom3 parallel port 173 174 # 175 # Amiga Mainboard devices (sans graphics and keyboard) 176 # 177 178 ser0 at mainbus0 # Amiga onboard serial 179 par0 at mainbus0 # Amiga onboard parallel 180 ms* at mainbus0 # Amiga mice 181 fdc0 at mainbus0 # Amiga FDC 182 fd* at fdc0 unit ? # floppy disks on the later 183 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 184 a2kbbc0 at mainbus0 # A2000 battery backed clock 185 aucc* at mainbus0 # Amiga CC audio 186 audio* at aucc? 187 188 spkr* at audio? # PC speaker (synthesized) 189 190 # 191 # DraCo Mainboard devices (sans keyboard) 192 # 193 194 drbbc0 at mainbus0 # DraCo battery backed clock 195 drsupio0 at mainbus0 # DraCo superio chip 196 com* at drsupio? port ? # DraCo serial 197 lpt0 at drsupio? port ? # DraCo parallel 198 199 # 200 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 201 # 202 203 # Ethernet cards: 204 le* at zbus0 # A2065, Ameristar, Ariadne 205 ne* at zbus0 # AriadneII 206 ed* at zbus0 # Hydra, ASDG LanRover 207 es* at zbus0 # CEI A4066 EthernetPLUS 208 qn* at zbus0 # Quicknet 209 210 # Arcnet 211 bah* at zbus0 # C=/Ameristar A2060 / 560 212 213 # Greater Valley Product Bus 214 gvpbus* at zbus0 215 216 # scsi stuff, all possible 217 gtsc0 at gvpbus? # GVP series II scsi 218 scsibus* at gtsc0 219 ahsc0 at mainbus0 # A3000 scsi 220 scsibus* at ahsc0 221 atzsc0 at zbus0 # A2091 scsi 222 scsibus* at atzsc0 223 wstsc0 at zbus0 # Wordsync II scsi 224 scsibus* at wstsc0 225 ivsc0 at zbus0 # IVS scsi 226 scsibus* at ivsc0 227 mlhsc0 at zbus0 # Hacker scsi 228 scsibus* at mlhsc0 229 otgsc0 at zbus0 # 12 gauge scsi 230 scsibus* at otgsc0 231 zssc0 at zbus0 # Zeus scsi 232 scsibus* at zssc0 233 mgnsc0 at zbus0 # Magnum scsi 234 scsibus* at mgnsc0 235 wesc0 at zbus0 # Warp Engine scsi 236 scsibus* at wesc0 237 bppcsc0 at zbus0 # BlizzardPPC 603e+ scsi 238 scsibus* at bppcsc0 239 afsc0 at zbus0 # A4091 scsi 240 scsibus* at afsc0 241 aftsc0 at mainbus0 # A4000T scsi 242 scsibus* at aftsc0 243 flsc0 at zbus0 # FastlaneZ3 scsi 244 scsibus* at flsc0 245 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 246 scsibus* at bzsc0 247 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 248 scsibus* at bzivsc0 249 bztzsc0 at zbus0 # Blizzard 2060 scsi 250 scsibus* at bztzsc0 251 cbsc0 at zbus0 # CyberSCSI I 252 scsibus* at cbsc0 253 cbiisc0 at zbus0 # CyberSCSI II 254 scsibus* at cbiisc0 255 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 256 scsibus* at cbiiisc0 257 empsc0 at zbus0 # Emplant scsi 258 scsibus* at empsc0 259 wdc0 at mainbus0 # A4000 & A1200 IDE bus 260 atabus* at wdc? channel ? # ATA bus 261 wd* at atabus? drive ? # + drives 262 atapibus* at atabus? # ATAPI bus 263 cd* at atapibus? drive ? # ATAPI CD-ROM drives 264 sd* at atapibus? drive ? # ATAPI disk drives 265 266 drsc0 at mainbus0 # DraCo scsi 267 scsibus* at drsc0 268 269 270 # each hard drive from low target to high 271 # will configure to the next available sd unit number 272 sd* at scsibus? target ? lun ? # scsi disks 273 st* at scsibus? target ? lun ? # scsi tapes 274 cd* at scsibus? target ? lun ? # scsi cds 275 276 pseudo-device loop # loopback network interface 277 pseudo-device sl # SLIP network interfaces 278 pseudo-device ppp # PPP network interfaces 279 280 pseudo-device view 10 # views 281 pseudo-device pty # pseudo-terminals 282 283 pseudo-device vnd # vnode pseudo-disks 284 285 #options RND_COM # use "com" randomness as well (BROKEN) 286 287 config netbsd root on ? type ? 288 289 # Enable the hooks used for initializing the root memory-disk. 290 options MEMORY_DISK_HOOKS 291 options MEMORY_DISK_IS_ROOT # force root on memory disk 292 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 293 options MEMORY_DISK_ROOT_SIZE=2048 # size of memory disk, in blocks 294 options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode 295 296 pseudo-device md # memory disk [ramdisk] 297
Indexes created Tue Oct 14 21:09:58 GMT 2025