WSCONS revision 1.23
11.23Smanu# $NetBSD: WSCONS,v 1.23 2004/09/04 23:29:46 manu Exp $ 21.1Sjandberg# 31.7Slukem# This file was automatically created. 41.7Slukem# Changes will be lost when make is run in this directory. 51.1Sjandberg# 61.22Sbouyer# Created from: # NetBSD: GENERIC.in,v 1.23 2004/06/28 21:07:47 bouyer Exp $ 71.7Slukem# 81.7Slukem# GENERIC machine description file 91.7Slukem# 101.7Slukem# This machine description file is used to generate the default NetBSD 111.7Slukem# kernel. The generic kernel does not include all options, subsystems 121.7Slukem# and device drivers, but should be useful for most applications. 131.7Slukem# 141.7Slukem# The machine description file can be customised for your specific 151.7Slukem# machine to reduce the kernel size and improve its performance. 161.7Slukem# 171.7Slukem# For further information on compiling NetBSD kernels, see the config(8) 181.7Slukem# man page. 191.7Slukem# 201.7Slukem# For further information on hardware support for this architecture, see 211.7Slukem# the intro(4) man page. For further information about kernel options 221.7Slukem# for this architecture, see the options(4) man page. For an explanation 231.7Slukem# of each device driver in this file see the section 4 man page for the 241.7Slukem# device. 251.1Sjandberg 261.1Sjandberg 271.1Sjandberginclude "arch/amiga/conf/std.amiga" 281.1Sjandberg 291.4Satatatoptions INCLUDE_CONFIG_FILE # embed config file in kernel binary 301.4Satatat 311.23Smanu#ident "GENERIC-$Revision: 1.23 $" 321.7Slukem 331.1Sjandberg 341.1Sjandbergmaxusers 8 351.1Sjandbergoptions RTC_OFFSET=0 361.1Sjandberg 371.7Slukem# 381.7Slukem# mainboards to support (in addition to Amiga) 391.7Slukem# 401.1Sjandbergoptions DRACO 411.1Sjandbergoptions BB060STUPIDROM # You need this, if you have a non-DraCo 421.7Slukem # MC68060 with an OS ROM up to (at least) 431.7Slukem # V40 (OS3.1) and want to boot with the 441.7Slukem # bootblock. 451.7Slukem # You do not need this if you have a DraCo, 461.7Slukem # have no 68060 or NEVER use the bootblock 471.1Sjandbergoptions P5PPC68KBOARD # Phase5 PPC/68K board support 481.7Slukem# 491.7Slukem# processors this kernel should support 501.7Slukem# 511.1Sjandbergoptions M68060 # support for 060 521.1Sjandbergoptions M060SP # MC68060 software support (Required for 060) 531.1Sjandbergoptions M68040 # support for 040 541.1Sjandbergoptions FPSP # MC68040 floating point support 551.1Sjandbergoptions M68030 # support for 030 561.1Sjandbergoptions M68020 # support for 020/851 571.1Sjandbergoptions FPU_EMULATE # FPU emulation 581.1Sjandberg 591.7Slukem# 601.7Slukem# Networking options 611.7Slukem# 621.1Sjandbergoptions INET # IP networking support (Required) 631.1Sjandbergoptions INET6 # IPV6 641.1Sjandberg#options IPSEC # IP security 651.1Sjandberg#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 661.1Sjandberg#options IPSEC_DEBUG # debug for IP security 671.1Sjandberg#options GATEWAY # Packet forwarding 681.1Sjandberg#options DIRECTED_BROADCAST # Broadcast across subnets 691.1Sjandberg 701.1Sjandberg#options MROUTING # Multicast routing 711.23Smanu#options PIM # Protocol Independent Multicast 721.1Sjandbergoptions NS # XNS 731.1Sjandberg#options NSIP # XNS tunneling over IP 741.1Sjandbergoptions ISO,TPIP # OSI 751.1Sjandberg#options EON # OSI tunneling over IP 761.1Sjandbergoptions CCITT,LLC,HDLC # X.25 771.1Sjandbergoptions NETATALK # AppleTalk networking protocols 781.1Sjandberg#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 791.1Sjandberg 801.1Sjandbergoptions PPP_BSDCOMP # BSD-Compress compression support for PPP 811.1Sjandbergoptions PPP_DEFLATE # Deflate compression support for PPP 821.1Sjandbergoptions PPP_FILTER # Active filter support for PPP (requires bpf) 831.1Sjandbergoptions PFIL_HOOKS # pfil(9) packet filter hooks 841.1Sjandbergoptions IPFILTER_LOG # ipmon(8) log support 851.10Sprovos#options IPFILTER_DEFAULT_BLOCK # block all packets by default 861.1Sjandberg 871.21Sabs#options ALTQ # Manipulate network interfaces' output queues 881.21Sabs#options ALTQ_BLUE # Stochastic Fair Blue 891.21Sabs#options ALTQ_CBQ # Class-Based Queueing 901.21Sabs#options ALTQ_CDNR # Diffserv Traffic Conditioner 911.21Sabs#options ALTQ_FIFOQ # First-In First-Out Queue 921.21Sabs#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 931.21Sabs#options ALTQ_HFSC # Hierarchical Fair Service Curve 941.21Sabs#options ALTQ_LOCALQ # Local queueing discipline 951.21Sabs#options ALTQ_PRIQ # Priority Queueing 961.21Sabs#options ALTQ_RED # Random Early Detection 971.21Sabs#options ALTQ_RIO # RED with IN/OUT 981.21Sabs#options ALTQ_WFQ # Weighted Fair Queueing 991.21Sabs 1001.7Slukem# Filesystems 1011.1Sjandbergfile-system FFS # Berkeley fast file system 1021.1Sjandbergfile-system EXT2FS # second extended file system (linux) 1031.1Sjandberg#file-system LFS # log-structured filesystem (experimental) 1041.1Sjandberg 1051.1Sjandbergfile-system MFS # Memory based filesystem 1061.1Sjandberg 1071.1Sjandbergfile-system NFS # Network File System client side code 1081.1Sjandbergfile-system ADOSFS # AmigaDOS file system 1091.1Sjandbergfile-system CD9660 # ISO 9660 + Rock Ridge filesystem 1101.1Sjandbergfile-system MSDOSFS # MS-DOS filesystem 1111.1Sjandberg 1121.1Sjandbergfile-system KERNFS # kernel data-structure filesystem 1131.1Sjandberg 1141.1Sjandbergfile-system FDESC # user file descriptor filesystem 1151.1Sjandbergfile-system NULLFS # loopback filesystem 1161.1Sjandbergfile-system OVERLAY # overlay filesystem 1171.1Sjandberg#file-system PORTAL # Portal filesystem 1181.1Sjandbergfile-system PROCFS # /proc filesystem 1191.1Sjandbergfile-system UMAPFS # NULLFS + uid and gid remapping 1201.1Sjandbergfile-system UNION # union filesystem 1211.1Sjandberg 1221.7Slukem# Filesystem options 1231.1Sjandberg 1241.1Sjandberg#options FFS_EI # FFS Endian Independant support 1251.1Sjandberg 1261.1Sjandbergoptions QUOTA # User and group quotas in FFS 1271.1Sjandbergoptions SOFTDEP # FFS soft updates support. 1281.1Sjandbergoptions NFSSERVER # Network File System server side code 1291.1Sjandberg 1301.1Sjandberg#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 1311.7Slukem # immutable) behave as system flags. 1321.1Sjandberg 1331.7Slukem# 1341.7Slukem# Compatibility options for various existing systems 1351.7Slukem# 1361.1Sjandberg 1371.1Sjandberg#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 1381.1Sjandbergoptions COMPAT_43 # compatibility with 4.3BSD interfaces 1391.1Sjandbergoptions COMPAT_09 # compatibility with NetBSD 0.9 1401.1Sjandbergoptions COMPAT_10 # compatibility with NetBSD 1.0 1411.1Sjandbergoptions COMPAT_12 # compatibility with NetBSD 1.2 1421.1Sjandbergoptions COMPAT_13 # compatibility with NetBSD 1.3 1431.1Sjandbergoptions COMPAT_14 # compatibility with NetBSD 1.4 1441.17Scloptions COMPAT_15 # compatibility with NetBSD 1.5 1451.17Scloptions COMPAT_16 # compatibility with NetBSD 1.6 1461.1Sjandbergoptions COMPAT_SUNOS # Support to run Sun (m68k) executables 1471.1Sjandbergoptions COMPAT_SVR4 # Support to run SVR4 (m68k) executables 1481.1Sjandbergoptions COMPAT_NOMID # allow nonvalid machine id executables 1491.1Sjandberg#options COMPAT_LINUX # Support to run Linux/m68k executables 1501.1Sjandberg 1511.1Sjandbergoptions EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 1521.1Sjandbergoptions COMPAT_AOUT_M68K # actually make some system calls work. 1531.1Sjandberg 1541.7Slukem# 1551.7Slukem# Support for System V IPC facilities. 1561.7Slukem# 1571.1Sjandbergoptions SYSVSHM # System V-like shared memory 1581.1Sjandbergoptions SYSVMSG # System V-like messages 1591.1Sjandbergoptions SYSVSEM # System V-like semaphores 1601.1Sjandberg#options SEMMNI=10 # number of semaphore identifiers 1611.1Sjandberg#options SEMMNS=60 # number of semaphores in system 1621.1Sjandberg#options SEMUME=10 # max number of undo entries per process 1631.1Sjandberg#options SEMMNU=30 # number of undo structures in system 1641.22Sbouyeroptions P1003_1B_SEMAPHORE # p1003.1b semaphore support 1651.1Sjandberg 1661.7Slukem# 1671.7Slukem# Support for various kernel options 1681.7Slukem# 1691.1Sjandberg 1701.1Sjandbergoptions KTRACE # system call tracing support 1711.10Sprovosoptions SYSTRACE # system call vetting via systrace(1) 1721.1Sjandbergoptions LKM # Loadable kernel modules 1731.1Sjandberg#options INSECURE # disable kernel security levels 1741.1Sjandbergoptions SCSIVERBOSE # human readable SCSI error messages 1751.9Slukemoptions USERCONF # userconf(4) support 1761.1Sjandbergoptions NTP # NTP phase/frequency locked loop 1771.7Slukem#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 1781.12Swiz 1791.12Swiz# Enable experimental buffer queue strategy for better responsiveness under 1801.12Swiz# high disk I/O load. Use it with caution - it's not proven to be stable yet. 1811.12Swiz#options NEW_BUFQ_STRATEGY 1821.1Sjandberg 1831.7Slukem# 1841.7Slukem# Misc. debugging options 1851.7Slukem# 1861.1Sjandbergoptions DDB # Kernel debugger 1871.1Sjandberg#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 1881.1Sjandbergoptions DIAGNOSTIC # Extra kernel sanity checks 1891.1Sjandberg#options DEBUG # Enable misc. kernel debugging code 1901.1Sjandberg#options SYSCALL_DEBUG # debug all syscalls. 1911.1Sjandberg#options SCSIDEBUG # Add SCSI debugging statements 1921.5Sthorpej#options PANICBUTTON # Forced crash via keypress (?) 1931.1Sjandberg 1941.7Slukem# 1951.7Slukem# Amiga specific options 1961.7Slukem# 1971.1Sjandberg#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 1981.7Slukem # first bank of RAM. (default: unlimited) 1991.1Sjandberg#options NKPTADD=4 # set this for 4 additional KPT pages 2001.1Sjandberg#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 2011.7Slukem # per 16 MB (1<<24 bytes) of RAM 2021.7Slukem # uncomment and decrease this, or uncomment and 2031.7Slukem # increase NKPTADD if you get "out of PT pages" 2041.7Slukem # panics. 2051.7Slukem 2061.7Slukem# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 2071.7Slukem# before the 10 secondinterval ends, or that KBDRESET does work at all. 2081.1Sjandberg#options KBDRESET # sync on Ctrl-Amiga-Amiga 2091.1Sjandberg 2101.7Slukem# These options improve performance with the built-in serial port 2111.7Slukem# on slower Amigas. Try the larger buffers first then lev6_defer. 2121.1Sjandberg#options SERIBUF_SIZE=4096 2131.1Sjandberg#options SEROBUF_SIZE=32 2141.1Sjandberg#options LEV6_DEFER # defers l6 to l4 (below serial l5) 2151.15Sis 2161.15Sis#options DEVRELOAD # implement /dev/reload 2171.15Sis# # currently only works for a.out kernels 2181.1Sjandberg 2191.1Sjandbergoptions RETINACONSOLE # enable code to allow retina to be console 2201.1Sjandbergoptions ULOWELLCONSOLE # enable code to allow a2410 to be console 2211.1Sjandbergoptions CL5426CONSOLE # Cirrus console 2221.1Sjandbergoptions CV64CONSOLE # CyberVision console 2231.1Sjandbergoptions TSENGCONSOLE # Tseng console 2241.1Sjandbergoptions CV3DCONSOLE # CyberVision 64/3D console 2251.1Sjandberg 2261.1Sjandbergoptions GRF_ECS # Enhanced Chip Set 2271.1Sjandbergoptions GRF_NTSC # NTSC 2281.1Sjandbergoptions GRF_PAL # PAL 2291.1Sjandbergoptions GRF_A2024 # Support for the A2024 2301.1Sjandbergoptions GRF_AGA # AGA Chip Set 2311.1Sjandbergoptions GRF_AGA_VGA # AGA VGAONLY timing 2321.1Sjandbergoptions GRF_SUPER72 # AGA Super-72 2331.1Sjandberg#options KFONT_8X11 # 8x11 font 2341.1Sjandberg 2351.7Slukem# select a font for the console according to the character set and keymap 2361.7Slukem# you want to use 2371.3Sheinzoptions KFONT_CONS_ISO8859_1 2381.3Sheinz#options KFONT_CONS_ISO8859_2 2391.3Sheinz 2401.7Slukem# This is how you would tell the kernel the A2410 oscillator frequencies: 2411.7Slukem# The used frequencies are the defaults, and do not need option setting 2421.1Sjandberg#options ULOWELL_OSC1=36000000 2431.1Sjandberg#options ULOWELL_OSC2=66667000 2441.1Sjandberg 2451.7Slukem# This is how you specify the blitting speed, higher values may speed up blits 2461.7Slukem# a littel bit. If you raise this value too much some trash may appear. 2471.7Slukem# the commented version is the default. 2481.1Sjandberg#options RH_MEMCLK=61000000 2491.7Slukem# this option enables the 64 bit sprite which does not work 2501.7Slukem# for quite a few people. E.g. The cursor sprite will turn to a block 2511.7Slukem# when moved to the top of the screen in X. 2521.1Sjandberg#options RH_64BIT_SPRITE 2531.7Slukem# enables fast scroll code appears to now work on 040 systems. 2541.1Sjandberg#options RETINA_SPEED_HACK 2551.7Slukem# enables the Hardwarecursor which does not work on some systems. 2561.1Sjandberg#options RH_HARDWARECURSOR 2571.1Sjandberg 2581.7Slukem# wscons aware interface to amiga custom chips. 2591.7Slukem# If you enable it enable also wskbd. 2601.7Slukem# 2611.1Sjandbergamidisplaycc0 at mainbus0 # wscons interface to custom chips 2621.1Sjandbergwsdisplay0 at amidisplaycc0 console ? 2631.7Slukemoptions WSEMUL_VT100 2641.7Slukemoptions FONT_VT220L8x10 2651.20Sjandbergoptions FONT_VT220ISO8x16 2661.7Slukem 2671.1Sjandberg 2681.1Sjandbergmsc0 at zbus0 # A2232 MSC multiport serial. 2691.1Sjandbergmfc0 at zbus0 # MultiFaceCard I/O board 2701.1Sjandbergmfcs0 at mfc0 unit 0 # MFC serial 2711.1Sjandbergmfcs1 at mfc0 unit 1 # MFC serial 2721.1Sjandberg#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 2731.1Sjandberg#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 2741.1Sjandberg#mfcs2 at mfc1 unit 0 2751.1Sjandberg#mfcs3 at mfc1 unit 1 2761.1Sjandberg#mfcp1 at mfc1 unit 0 2771.1Sjandberg 2781.1Sjandberghyper* at zbus? # zbus HyperCom3/3+/4/4+ 2791.1Sjandberg#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 2801.1Sjandbergcom* at hyper? port ? # Hypercom3/4 serial ports 2811.1Sjandberglpt* at hyper? port ? # Hypercom3+/4+ parallel port 2821.1Sjandberg 2831.1Sjandberg#options IOBZCLOCK=22118400 # default, uncomment the next line 2841.1Sjandberg#options IOBZCLOCK=24000000 # if needed. 2851.1Sjandberg 2861.1Sjandbergiobl* at zbus? # zbus IOBlix 2871.1Sjandbergcom* at iobl? port ? # IOBlix serial ports 2881.1Sjandberglpt* at iobl? port ? # IOBlix parallel ports 2891.1Sjandberg 2901.7Slukem 2911.7Slukem# 2921.7Slukem# Keyboard device. Optionally can attach a wskbd. 2931.7Slukem# wskbd works together with a wsdisplay so enable them both if you will. 2941.7Slukem# Don't enable wskbd if you use ite. 2951.4Satatat# 2961.7Slukem# XXX in std.amiga: kbd0 at mainbus0 2971.1Sjandbergwskbd0 at kbd0 console ? 2981.1Sjandberg 2991.7Slukem 3001.7Slukem# 3011.7Slukem# Amiga Mainboard devices (sans graphics and keyboard) 3021.7Slukem# 3031.1Sjandberg 3041.1Sjandbergser0 at mainbus0 # Amiga onboard serial 3051.1Sjandbergpar0 at mainbus0 # Amiga onboard parallel 3061.1Sjandbergms* at mainbus0 # Amiga mice 3071.1Sjandbergfdc0 at mainbus0 # Amiga FDC 3081.1Sjandbergfd* at fdc0 unit ? # floppy disks on the later 3091.1Sjandberga34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 3101.1Sjandberga2kbbc0 at mainbus0 # A2000 battery backed clock 3111.1Sjandbergaucc* at mainbus0 # Amiga CC audio 3121.1Sjandbergaudio* at aucc? 3131.18Sjandberg 3141.18Sjandbergwsmouse* at ms? 3151.1Sjandberg 3161.7Slukem# 3171.7Slukem# DraCo Mainboard devices (sans keyboard) 3181.7Slukem# 3191.1Sjandberg 3201.1Sjandbergdrbbc0 at mainbus0 # DraCo battery backed clock 3211.1Sjandbergdrsupio0 at mainbus0 # DraCo superio chip 3221.1Sjandbergcom* at drsupio? port ? # DraCo serial 3231.1Sjandberglpt0 at drsupio? port ? # DraCo parallel 3241.1Sjandberg 3251.7Slukem# 3261.7Slukem# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 3271.7Slukem# 3281.7Slukem 3291.1Sjandberg 3301.1Sjandbergrepulse* at zbus0 # ALiENDESiGN Repulse 3311.1Sjandbergaudio* at repulse? 3321.1Sjandberg 3331.1Sjandbergtoccata* at zbus0 # MacroSystem GmbH Toccata 3341.1Sjandbergaudio* at toccata? 3351.1Sjandberg 3361.7Slukem# Ethernet cards: 3371.1Sjandbergle* at zbus0 # A2065, Ameristar, Ariadne 3381.1Sjandbergne* at zbus0 # AriadneII, X-surf 3391.1Sjandberged* at zbus0 # Hydra, ASDG LanRover 3401.1Sjandberges* at zbus0 # CEI A4066 EthernetPLUS 3411.1Sjandbergqn* at zbus0 # Quicknet 3421.1Sjandberg 3431.7Slukem# Arcnet 3441.1Sjandbergbah* at zbus0 # C=/Ameristar A2060 / 560 3451.1Sjandberg 3461.7Slukem# Greater Valley Product Bus 3471.1Sjandberggvpbus* at zbus0 3481.1Sjandberg 3491.7Slukem# scsi stuff, all possible 3501.1Sjandberggtsc0 at gvpbus? # GVP series II scsi 3511.1Sjandbergscsibus* at gtsc0 3521.1Sjandbergahsc0 at mainbus0 # A3000 scsi 3531.1Sjandbergscsibus* at ahsc0 3541.1Sjandbergatzsc0 at zbus0 # A2091 scsi 3551.1Sjandbergscsibus* at atzsc0 3561.1Sjandbergwstsc0 at zbus0 # Wordsync II scsi 3571.1Sjandbergscsibus* at wstsc0 3581.1Sjandbergivsc0 at zbus0 # IVS scsi 3591.1Sjandbergscsibus* at ivsc0 3601.1Sjandbergmlhsc0 at zbus0 # Hacker scsi 3611.1Sjandbergscsibus* at mlhsc0 3621.1Sjandbergotgsc0 at zbus0 # 12 gauge scsi 3631.1Sjandbergscsibus* at otgsc0 3641.1Sjandbergzssc0 at zbus0 # Zeus scsi 3651.1Sjandbergscsibus* at zssc0 3661.1Sjandbergmgnsc0 at zbus0 # Magnum scsi 3671.1Sjandbergscsibus* at mgnsc0 3681.1Sjandbergwesc0 at zbus0 # Warp Engine scsi 3691.1Sjandbergscsibus* at wesc0 3701.1Sjandbergafsc0 at zbus0 # A4091 scsi 3711.1Sjandbergscsibus* at afsc0 3721.1Sjandbergaftsc0 at mainbus0 # A4000T scsi 3731.1Sjandbergscsibus* at aftsc0 3741.1Sjandbergflsc0 at zbus0 # FastlaneZ3 scsi 3751.1Sjandbergscsibus* at flsc0 3761.1Sjandbergbzsc0 at zbus0 # Blizzard 1230 I,II scsi 3771.1Sjandbergscsibus* at bzsc0 3781.1Sjandbergbzivsc0 at zbus0 # Blizzard 12x0 IV scsi 3791.1Sjandbergscsibus* at bzivsc0 3801.1Sjandbergbztzsc0 at zbus0 # Blizzard 2060 scsi 3811.1Sjandbergscsibus* at bztzsc0 3821.1Sjandbergcbsc0 at zbus0 # CyberSCSI I 3831.1Sjandbergscsibus* at cbsc0 3841.1Sjandbergcbiisc0 at zbus0 # CyberSCSI II 3851.1Sjandbergscsibus* at cbiisc0 3861.1Sjandbergcbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 3871.1Sjandbergscsibus* at cbiiisc0 3881.1Sjandbergempsc0 at zbus0 # Emplant scsi 3891.1Sjandbergscsibus* at empsc0 3901.1Sjandberg#idesc0 at mainbus0 # A4000 & A1200 IDE 3911.1Sjandberg#scsibus* at idesc0 3921.1Sjandberg 3931.7Slukem# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 3941.7Slukem# <<< are uncommented >>> 3951.1Sjandbergwdc0 at mainbus0 # A4000 & A1200 IDE bus 3961.19Sbouyeratabus* at wdc? channel ? # ATA bus 3971.19Sbouyerwd* at atabus? drive ? # + drives 3981.19Sbouyeratapibus* at atabus? # ATAPI bus 3991.1Sjandbergcd* at atapibus? drive ? # ATAPI CD-ROM drives 4001.1Sjandbergsd* at atapibus? drive ? # ATAPI disk drives 4011.1Sjandberg 4021.1Sjandbergpccard0 at mainbus0 4031.1Sjandbergpcmcia* at pccard0 4041.1Sjandbergcom* at pcmcia? function ? # Modems and serial cards 4051.1Sjandbergpcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 4061.1Sjandbergaic* at pcmcia? function ? # Adaptec APA-1460 SCSI 4071.1Sjandbergwdc* at pcmcia? function ? 4081.1Sjandbergawi* at pcmcia? function ? # BayStack 650 (802.11FH) 4091.1Sjandbergep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 4101.1Sjandbergmbe* at pcmcia? function ? # MB8696x based Ethernet 4111.1Sjandbergne* at pcmcia? function ? # NE2000-compatible Ethernet 4121.1Sjandbergsm* at pcmcia? function ? # Megahertz Ethernet 4131.1Sjandbergmhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 4141.1Sjandbergcom* at mhzc? 4151.1Sjandbergsm* at mhzc? 4161.1Sjandberg 4171.7Slukem 4181.1Sjandbergdrsc0 at mainbus0 # DraCo scsi 4191.1Sjandbergscsibus* at drsc0 4201.1Sjandberg 4211.7Slukem 4221.7Slukem# each hard drive from low target to high 4231.7Slukem# will configure to the next available sd unit number 4241.1Sjandbergsd* at scsibus? target ? lun ? # scsi disks 4251.1Sjandbergst* at scsibus? target ? lun ? # scsi tapes 4261.1Sjandbergcd* at scsibus? target ? lun ? # scsi cds 4271.1Sjandbergch* at scsibus? target ? lun ? # scsi autochangers 4281.1Sjandbergss* at scsibus? target ? lun ? # scsi scanner 4291.1Sjandberguk* at scsibus? target ? lun ? # scsi unknown 4301.1Sjandberg 4311.1Sjandbergpseudo-device loop # loopback network interface 4321.1Sjandbergpseudo-device sl 1 # SLIP network interfaces 4331.1Sjandbergpseudo-device ppp 1 # PPP network interfaces 4341.1Sjandbergpseudo-device pppoe # PPP over Ethernet (RFC 2516) 4351.1Sjandbergpseudo-device tun 1 # network tunnel line discipline 4361.1Sjandberg#pseudo-device gre 2 # generic L3 over IP tunnel 4371.1Sjandbergpseudo-device bpfilter 16 # Berkeley packet filter 4381.1Sjandbergpseudo-device ipfilter # IP Filter package 4391.1Sjandbergpseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 4401.1Sjandberg#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 4411.1Sjandberg#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 4421.1Sjandbergpseudo-device vlan # IEEE 802.1q encapsulation 4431.1Sjandbergpseudo-device bridge # simple inter-network bridging 4441.13Sperseant#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 4451.21Sabs#pseudo-device pf # PF packet filter 4461.21Sabs#pseudo-device pflog # PF log if 4471.1Sjandberg 4481.1Sjandbergpseudo-device view 4 # views (needed for grfcc) 4491.1Sjandbergpseudo-device pty # pseudo-terminals 4501.6Slukempseudo-device clockctl # user control of clock subsystem 4511.1Sjandberg 4521.20Sjandbergpseudo-device wsfont # wsfont(4) dynamic font loading support 4531.20Sjandberg 4541.1Sjandbergpseudo-device vnd 4 # vnode pseudo-disks 4551.1Sjandbergpseudo-device ccd 4 # concatenated disk devices 4561.11Selric#pseudo-device cgd 4 # cryptographic disk devices 4571.1Sjandbergpseudo-device raid 8 # RAIDframe disk driver 4581.1Sjandbergoptions RAID_AUTOCONFIG # auto-configuration of RAID components 4591.7Slukem# Options to enable various other RAIDframe RAID types. 4601.7Slukem# options RF_INCLUDE_EVENODD=1 4611.7Slukem# options RF_INCLUDE_RAID5_RS=1 4621.7Slukem# options RF_INCLUDE_PARITYLOGGING=1 4631.7Slukem# options RF_INCLUDE_CHAINDECLUSTER=1 4641.7Slukem# options RF_INCLUDE_INTERDECLUSTER=1 4651.7Slukem# options RF_INCLUDE_PARITY_DECLUSTERING=1 4661.7Slukem# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 4671.1Sjandberg 4681.1Sjandbergpseudo-device rnd # /dev/random and in-kernel generator 4691.1Sjandberg#options RND_COM # use "com" randomness as well (BROKEN) 4701.16Sis 4711.16Sispseudo-device ksyms # /dev/ksyms (kernel symbols) 4721.1Sjandberg 4731.1Sjandbergconfig netbsd root on ? type ? 474