WSCONS revision 1.10
1 # $NetBSD: WSCONS,v 1.10 2002/10/06 03:00:03 provos Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.6 2002/10/06 02:58:21 provos Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.10 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options DRACO 41 options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47 options P5PPC68KBOARD # Phase5 PPC/68K board support 48 # 49 # processors this kernel should support 50 # 51 options M68060 # support for 060 52 options M060SP # MC68060 software support (Required for 060) 53 options M68040 # support for 040 54 options FPSP # MC68040 floating point support 55 options M68030 # support for 030 56 options M68020 # support for 020/851 57 options FPU_EMULATE # FPU emulation 58 59 # 60 # Networking options 61 # 62 options INET # IP networking support (Required) 63 options INET6 # IPV6 64 #options IPSEC # IP security 65 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66 #options IPSEC_DEBUG # debug for IP security 67 #options GATEWAY # Packet forwarding 68 #options DIRECTED_BROADCAST # Broadcast across subnets 69 70 #options MROUTING # Multicast routing 71 options NS # XNS 72 #options NSIP # XNS tunneling over IP 73 options ISO,TPIP # OSI 74 #options EON # OSI tunneling over IP 75 options CCITT,LLC,HDLC # X.25 76 options NETATALK # AppleTalk networking protocols 77 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 79 options PPP_BSDCOMP # BSD-Compress compression support for PPP 80 options PPP_DEFLATE # Deflate compression support for PPP 81 options PPP_FILTER # Active filter support for PPP (requires bpf) 82 options PFIL_HOOKS # pfil(9) packet filter hooks 83 options IPFILTER_LOG # ipmon(8) log support 84 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86 # Filesystems 87 file-system FFS # Berkeley fast file system 88 file-system EXT2FS # second extended file system (linux) 89 #file-system LFS # log-structured filesystem (experimental) 90 91 file-system MFS # Memory based filesystem 92 93 file-system NFS # Network File System client side code 94 file-system ADOSFS # AmigaDOS file system 95 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 96 file-system MSDOSFS # MS-DOS filesystem 97 98 file-system KERNFS # kernel data-structure filesystem 99 100 file-system FDESC # user file descriptor filesystem 101 file-system NULLFS # loopback filesystem 102 file-system OVERLAY # overlay filesystem 103 #file-system PORTAL # Portal filesystem 104 file-system PROCFS # /proc filesystem 105 file-system UMAPFS # NULLFS + uid and gid remapping 106 file-system UNION # union filesystem 107 108 # Filesystem options 109 110 #options FFS_EI # FFS Endian Independant support 111 112 options QUOTA # User and group quotas in FFS 113 options SOFTDEP # FFS soft updates support. 114 options NFSSERVER # Network File System server side code 115 116 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 117 # immutable) behave as system flags. 118 119 # 120 # Compatibility options for various existing systems 121 # 122 123 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 124 options COMPAT_43 # compatibility with 4.3BSD interfaces 125 options COMPAT_09 # compatibility with NetBSD 0.9 126 options COMPAT_10 # compatibility with NetBSD 1.0 127 options COMPAT_12 # compatibility with NetBSD 1.2 128 options COMPAT_13 # compatibility with NetBSD 1.3 129 options COMPAT_14 # compatibility with NetBSD 1.4 130 options COMPAT_SUNOS # Support to run Sun (m68k) executables 131 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 132 options COMPAT_NOMID # allow nonvalid machine id executables 133 #options COMPAT_LINUX # Support to run Linux/m68k executables 134 135 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 136 options COMPAT_AOUT_M68K # actually make some system calls work. 137 138 # 139 # Support for System V IPC facilities. 140 # 141 options SYSVSHM # System V-like shared memory 142 options SYSVMSG # System V-like messages 143 options SYSVSEM # System V-like semaphores 144 #options SEMMNI=10 # number of semaphore identifiers 145 #options SEMMNS=60 # number of semaphores in system 146 #options SEMUME=10 # max number of undo entries per process 147 #options SEMMNU=30 # number of undo structures in system 148 149 # 150 # Support for various kernel options 151 # 152 153 options KTRACE # system call tracing support 154 options SYSTRACE # system call vetting via systrace(1) 155 options LKM # Loadable kernel modules 156 options UCONSOLE # anyone can redirect a virtual console 157 #options INSECURE # disable kernel security levels 158 options SCSIVERBOSE # human readable SCSI error messages 159 options USERCONF # userconf(4) support 160 options NTP # NTP phase/frequency locked loop 161 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 162 163 # 164 # Misc. debugging options 165 # 166 options DDB # Kernel debugger 167 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 168 options DIAGNOSTIC # Extra kernel sanity checks 169 #options DEBUG # Enable misc. kernel debugging code 170 #options SYSCALL_DEBUG # debug all syscalls. 171 #options SCSIDEBUG # Add SCSI debugging statements 172 #options PANICBUTTON # Forced crash via keypress (?) 173 174 # 175 # Amiga specific options 176 # 177 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 178 # first bank of RAM. (default: unlimited) 179 #options NKPTADD=4 # set this for 4 additional KPT pages 180 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 181 # per 16 MB (1<<24 bytes) of RAM 182 # uncomment and decrease this, or uncomment and 183 # increase NKPTADD if you get "out of PT pages" 184 # panics. 185 186 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 187 # before the 10 secondinterval ends, or that KBDRESET does work at all. 188 #options KBDRESET # sync on Ctrl-Amiga-Amiga 189 190 # These options improve performance with the built-in serial port 191 # on slower Amigas. Try the larger buffers first then lev6_defer. 192 #options SERIBUF_SIZE=4096 193 #options SEROBUF_SIZE=32 194 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 195 196 options RETINACONSOLE # enable code to allow retina to be console 197 options ULOWELLCONSOLE # enable code to allow a2410 to be console 198 options CL5426CONSOLE # Cirrus console 199 options CV64CONSOLE # CyberVision console 200 options TSENGCONSOLE # Tseng console 201 options CV3DCONSOLE # CyberVision 64/3D console 202 203 options GRF_ECS # Enhanced Chip Set 204 options GRF_NTSC # NTSC 205 options GRF_PAL # PAL 206 options GRF_A2024 # Support for the A2024 207 options GRF_AGA # AGA Chip Set 208 options GRF_AGA_VGA # AGA VGAONLY timing 209 options GRF_SUPER72 # AGA Super-72 210 #options KFONT_8X11 # 8x11 font 211 212 # select a font for the console according to the character set and keymap 213 # you want to use 214 options KFONT_CONS_ISO8859_1 215 #options KFONT_CONS_ISO8859_2 216 217 # This is how you would tell the kernel the A2410 oscillator frequencies: 218 # The used frequencies are the defaults, and do not need option setting 219 #options ULOWELL_OSC1=36000000 220 #options ULOWELL_OSC2=66667000 221 222 # This is how you specify the blitting speed, higher values may speed up blits 223 # a littel bit. If you raise this value too much some trash may appear. 224 # the commented version is the default. 225 #options RH_MEMCLK=61000000 226 # this option enables the 64 bit sprite which does not work 227 # for quite a few people. E.g. The cursor sprite will turn to a block 228 # when moved to the top of the screen in X. 229 #options RH_64BIT_SPRITE 230 # enables fast scroll code appears to now work on 040 systems. 231 #options RETINA_SPEED_HACK 232 # enables the Hardwarecursor which does not work on some systems. 233 #options RH_HARDWARECURSOR 234 235 # wscons aware interface to amiga custom chips. 236 # If you enable it enable also wskbd. 237 # 238 amidisplaycc0 at mainbus0 # wscons interface to custom chips 239 wsdisplay0 at amidisplaycc0 console ? 240 options WSEMUL_VT100 241 options FONT_BOLD8x16 242 options FONT_VT220L8x10 243 244 245 msc0 at zbus0 # A2232 MSC multiport serial. 246 mfc0 at zbus0 # MultiFaceCard I/O board 247 mfcs0 at mfc0 unit 0 # MFC serial 248 mfcs1 at mfc0 unit 1 # MFC serial 249 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 250 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 251 #mfcs2 at mfc1 unit 0 252 #mfcs3 at mfc1 unit 1 253 #mfcp1 at mfc1 unit 0 254 255 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 256 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 257 com* at hyper? port ? # Hypercom3/4 serial ports 258 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 259 260 #options IOBZCLOCK=22118400 # default, uncomment the next line 261 #options IOBZCLOCK=24000000 # if needed. 262 263 iobl* at zbus? # zbus IOBlix 264 com* at iobl? port ? # IOBlix serial ports 265 lpt* at iobl? port ? # IOBlix parallel ports 266 267 268 # 269 # Keyboard device. Optionally can attach a wskbd. 270 # wskbd works together with a wsdisplay so enable them both if you will. 271 # Don't enable wskbd if you use ite. 272 # 273 # XXX in std.amiga: kbd0 at mainbus0 274 wskbd0 at kbd0 console ? 275 276 277 # 278 # Amiga Mainboard devices (sans graphics and keyboard) 279 # 280 281 ser0 at mainbus0 # Amiga onboard serial 282 par0 at mainbus0 # Amiga onboard parallel 283 ms* at mainbus0 # Amiga mice 284 fdc0 at mainbus0 # Amiga FDC 285 fd* at fdc0 unit ? # floppy disks on the later 286 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 287 a2kbbc0 at mainbus0 # A2000 battery backed clock 288 aucc* at mainbus0 # Amiga CC audio 289 audio* at aucc? 290 291 # 292 # DraCo Mainboard devices (sans keyboard) 293 # 294 295 drbbc0 at mainbus0 # DraCo battery backed clock 296 drsupio0 at mainbus0 # DraCo superio chip 297 com* at drsupio? port ? # DraCo serial 298 lpt0 at drsupio? port ? # DraCo parallel 299 300 # 301 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 302 # 303 304 305 repulse* at zbus0 # ALiENDESiGN Repulse 306 audio* at repulse? 307 308 toccata* at zbus0 # MacroSystem GmbH Toccata 309 audio* at toccata? 310 311 # Ethernet cards: 312 le* at zbus0 # A2065, Ameristar, Ariadne 313 ne* at zbus0 # AriadneII, X-surf 314 ed* at zbus0 # Hydra, ASDG LanRover 315 es* at zbus0 # CEI A4066 EthernetPLUS 316 qn* at zbus0 # Quicknet 317 318 # Arcnet 319 bah* at zbus0 # C=/Ameristar A2060 / 560 320 321 # Greater Valley Product Bus 322 gvpbus* at zbus0 323 324 # scsi stuff, all possible 325 gtsc0 at gvpbus? # GVP series II scsi 326 scsibus* at gtsc0 327 ahsc0 at mainbus0 # A3000 scsi 328 scsibus* at ahsc0 329 atzsc0 at zbus0 # A2091 scsi 330 scsibus* at atzsc0 331 wstsc0 at zbus0 # Wordsync II scsi 332 scsibus* at wstsc0 333 ivsc0 at zbus0 # IVS scsi 334 scsibus* at ivsc0 335 mlhsc0 at zbus0 # Hacker scsi 336 scsibus* at mlhsc0 337 otgsc0 at zbus0 # 12 gauge scsi 338 scsibus* at otgsc0 339 zssc0 at zbus0 # Zeus scsi 340 scsibus* at zssc0 341 mgnsc0 at zbus0 # Magnum scsi 342 scsibus* at mgnsc0 343 wesc0 at zbus0 # Warp Engine scsi 344 scsibus* at wesc0 345 afsc0 at zbus0 # A4091 scsi 346 scsibus* at afsc0 347 aftsc0 at mainbus0 # A4000T scsi 348 scsibus* at aftsc0 349 flsc0 at zbus0 # FastlaneZ3 scsi 350 scsibus* at flsc0 351 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 352 scsibus* at bzsc0 353 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 354 scsibus* at bzivsc0 355 bztzsc0 at zbus0 # Blizzard 2060 scsi 356 scsibus* at bztzsc0 357 cbsc0 at zbus0 # CyberSCSI I 358 scsibus* at cbsc0 359 cbiisc0 at zbus0 # CyberSCSI II 360 scsibus* at cbiisc0 361 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 362 scsibus* at cbiiisc0 363 empsc0 at zbus0 # Emplant scsi 364 scsibus* at empsc0 365 #idesc0 at mainbus0 # A4000 & A1200 IDE 366 #scsibus* at idesc0 367 368 # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 369 # <<< are uncommented >>> 370 wdc0 at mainbus0 # A4000 & A1200 IDE bus 371 wd* at wdc? drive ? # + drives 372 atapibus* at wdc? channel ? # ATAPI bus 373 cd* at atapibus? drive ? # ATAPI CD-ROM drives 374 sd* at atapibus? drive ? # ATAPI disk drives 375 376 pccard0 at mainbus0 377 pcmcia* at pccard0 378 com* at pcmcia? function ? # Modems and serial cards 379 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 380 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 381 wdc* at pcmcia? function ? 382 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 383 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 384 mbe* at pcmcia? function ? # MB8696x based Ethernet 385 ne* at pcmcia? function ? # NE2000-compatible Ethernet 386 sm* at pcmcia? function ? # Megahertz Ethernet 387 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 388 com* at mhzc? 389 sm* at mhzc? 390 391 392 drsc0 at mainbus0 # DraCo scsi 393 scsibus* at drsc0 394 395 396 # each hard drive from low target to high 397 # will configure to the next available sd unit number 398 sd* at scsibus? target ? lun ? # scsi disks 399 st* at scsibus? target ? lun ? # scsi tapes 400 cd* at scsibus? target ? lun ? # scsi cds 401 ch* at scsibus? target ? lun ? # scsi autochangers 402 ss* at scsibus? target ? lun ? # scsi scanner 403 uk* at scsibus? target ? lun ? # scsi unknown 404 405 pseudo-device loop # loopback network interface 406 pseudo-device sl 1 # SLIP network interfaces 407 pseudo-device ppp 1 # PPP network interfaces 408 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 409 pseudo-device tun 1 # network tunnel line discipline 410 #pseudo-device gre 2 # generic L3 over IP tunnel 411 pseudo-device bpfilter 16 # Berkeley packet filter 412 pseudo-device ipfilter # IP Filter package 413 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 414 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 415 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 416 pseudo-device vlan # IEEE 802.1q encapsulation 417 pseudo-device bridge # simple inter-network bridging 418 419 pseudo-device view 4 # views (needed for grfcc) 420 pseudo-device pty # pseudo-terminals 421 pseudo-device clockctl # user control of clock subsystem 422 423 pseudo-device vnd 4 # vnode pseudo-disks 424 pseudo-device ccd 4 # concatenated disk devices 425 pseudo-device raid 8 # RAIDframe disk driver 426 options RAID_AUTOCONFIG # auto-configuration of RAID components 427 # Options to enable various other RAIDframe RAID types. 428 # options RF_INCLUDE_EVENODD=1 429 # options RF_INCLUDE_RAID5_RS=1 430 # options RF_INCLUDE_PARITYLOGGING=1 431 # options RF_INCLUDE_CHAINDECLUSTER=1 432 # options RF_INCLUDE_INTERDECLUSTER=1 433 # options RF_INCLUDE_PARITY_DECLUSTERING=1 434 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 435 436 pseudo-device rnd # /dev/random and in-kernel generator 437 #options RND_COM # use "com" randomness as well (BROKEN) 438 439 config netbsd root on ? type ? 440
Indexes created Wed Oct 01 19:09:53 GMT 2025