WSCONS revision 1.15
1# $NetBSD: WSCONS,v 1.15 2003/04/16 20:43:29 is Exp $ 2# 3# This file was automatically created. 4# Changes will be lost when make is run in this directory. 5# 6# Created from: # NetBSD: GENERIC.in,v 1.12 2003/04/16 20:42:34 is Exp $ 7# 8# GENERIC machine description file 9# 10# This machine description file is used to generate the default NetBSD 11# kernel. The generic kernel does not include all options, subsystems 12# and device drivers, but should be useful for most applications. 13# 14# The machine description file can be customised for your specific 15# machine to reduce the kernel size and improve its performance. 16# 17# For further information on compiling NetBSD kernels, see the config(8) 18# man page. 19# 20# For further information on hardware support for this architecture, see 21# the intro(4) man page. For further information about kernel options 22# for this architecture, see the options(4) man page. For an explanation 23# of each device driver in this file see the section 4 man page for the 24# device. 25 26 27include "arch/amiga/conf/std.amiga" 28 29options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31#ident "GENERIC-$Revision: 1.15 $" 32 33 34maxusers 8 35options RTC_OFFSET=0 36 37# 38# mainboards to support (in addition to Amiga) 39# 40options DRACO 41options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47options P5PPC68KBOARD # Phase5 PPC/68K board support 48# 49# processors this kernel should support 50# 51options M68060 # support for 060 52options M060SP # MC68060 software support (Required for 060) 53options M68040 # support for 040 54options FPSP # MC68040 floating point support 55options M68030 # support for 030 56options M68020 # support for 020/851 57options FPU_EMULATE # FPU emulation 58 59# 60# Networking options 61# 62options INET # IP networking support (Required) 63options INET6 # IPV6 64#options IPSEC # IP security 65#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66#options IPSEC_DEBUG # debug for IP security 67#options GATEWAY # Packet forwarding 68#options DIRECTED_BROADCAST # Broadcast across subnets 69 70#options MROUTING # Multicast routing 71options NS # XNS 72#options NSIP # XNS tunneling over IP 73options ISO,TPIP # OSI 74#options EON # OSI tunneling over IP 75options CCITT,LLC,HDLC # X.25 76options NETATALK # AppleTalk networking protocols 77#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 79options PPP_BSDCOMP # BSD-Compress compression support for PPP 80options PPP_DEFLATE # Deflate compression support for PPP 81options PPP_FILTER # Active filter support for PPP (requires bpf) 82options PFIL_HOOKS # pfil(9) packet filter hooks 83options IPFILTER_LOG # ipmon(8) log support 84#options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 86# Filesystems 87file-system FFS # Berkeley fast file system 88file-system EXT2FS # second extended file system (linux) 89#file-system LFS # log-structured filesystem (experimental) 90 91file-system MFS # Memory based filesystem 92 93file-system NFS # Network File System client side code 94file-system ADOSFS # AmigaDOS file system 95file-system CD9660 # ISO 9660 + Rock Ridge filesystem 96file-system MSDOSFS # MS-DOS filesystem 97 98file-system KERNFS # kernel data-structure filesystem 99 100file-system FDESC # user file descriptor filesystem 101file-system NULLFS # loopback filesystem 102file-system OVERLAY # overlay filesystem 103#file-system PORTAL # Portal filesystem 104file-system PROCFS # /proc filesystem 105file-system UMAPFS # NULLFS + uid and gid remapping 106file-system UNION # union filesystem 107 108# Filesystem options 109 110#options FFS_EI # FFS Endian Independant support 111 112options QUOTA # User and group quotas in FFS 113options SOFTDEP # FFS soft updates support. 114options NFSSERVER # Network File System server side code 115 116#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 117 # immutable) behave as system flags. 118 119# 120# Compatibility options for various existing systems 121# 122 123#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 124options COMPAT_43 # compatibility with 4.3BSD interfaces 125options COMPAT_09 # compatibility with NetBSD 0.9 126options COMPAT_10 # compatibility with NetBSD 1.0 127options COMPAT_12 # compatibility with NetBSD 1.2 128options COMPAT_13 # compatibility with NetBSD 1.3 129options COMPAT_14 # compatibility with NetBSD 1.4 130options COMPAT_SUNOS # Support to run Sun (m68k) executables 131options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 132options COMPAT_NOMID # allow nonvalid machine id executables 133#options COMPAT_LINUX # Support to run Linux/m68k executables 134 135options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 136options COMPAT_AOUT_M68K # actually make some system calls work. 137 138# 139# Support for System V IPC facilities. 140# 141options SYSVSHM # System V-like shared memory 142options SYSVMSG # System V-like messages 143options SYSVSEM # System V-like semaphores 144#options SEMMNI=10 # number of semaphore identifiers 145#options SEMMNS=60 # number of semaphores in system 146#options SEMUME=10 # max number of undo entries per process 147#options SEMMNU=30 # number of undo structures in system 148 149# 150# Support for various kernel options 151# 152 153options KTRACE # system call tracing support 154options SYSTRACE # system call vetting via systrace(1) 155options LKM # Loadable kernel modules 156#options INSECURE # disable kernel security levels 157options SCSIVERBOSE # human readable SCSI error messages 158options USERCONF # userconf(4) support 159options NTP # NTP phase/frequency locked loop 160#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 161 162# Enable experimental buffer queue strategy for better responsiveness under 163# high disk I/O load. Use it with caution - it's not proven to be stable yet. 164#options NEW_BUFQ_STRATEGY 165 166# 167# Misc. debugging options 168# 169options DDB # Kernel debugger 170#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 171options DIAGNOSTIC # Extra kernel sanity checks 172#options DEBUG # Enable misc. kernel debugging code 173#options SYSCALL_DEBUG # debug all syscalls. 174#options SCSIDEBUG # Add SCSI debugging statements 175#options PANICBUTTON # Forced crash via keypress (?) 176 177# 178# Amiga specific options 179# 180#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 181 # first bank of RAM. (default: unlimited) 182#options NKPTADD=4 # set this for 4 additional KPT pages 183#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 184 # per 16 MB (1<<24 bytes) of RAM 185 # uncomment and decrease this, or uncomment and 186 # increase NKPTADD if you get "out of PT pages" 187 # panics. 188 189# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 190# before the 10 secondinterval ends, or that KBDRESET does work at all. 191#options KBDRESET # sync on Ctrl-Amiga-Amiga 192 193# These options improve performance with the built-in serial port 194# on slower Amigas. Try the larger buffers first then lev6_defer. 195#options SERIBUF_SIZE=4096 196#options SEROBUF_SIZE=32 197#options LEV6_DEFER # defers l6 to l4 (below serial l5) 198 199#options DEVRELOAD # implement /dev/reload 200# # currently only works for a.out kernels 201 202options RETINACONSOLE # enable code to allow retina to be console 203options ULOWELLCONSOLE # enable code to allow a2410 to be console 204options CL5426CONSOLE # Cirrus console 205options CV64CONSOLE # CyberVision console 206options TSENGCONSOLE # Tseng console 207options CV3DCONSOLE # CyberVision 64/3D console 208 209options GRF_ECS # Enhanced Chip Set 210options GRF_NTSC # NTSC 211options GRF_PAL # PAL 212options GRF_A2024 # Support for the A2024 213options GRF_AGA # AGA Chip Set 214options GRF_AGA_VGA # AGA VGAONLY timing 215options GRF_SUPER72 # AGA Super-72 216#options KFONT_8X11 # 8x11 font 217 218# select a font for the console according to the character set and keymap 219# you want to use 220options KFONT_CONS_ISO8859_1 221#options KFONT_CONS_ISO8859_2 222 223# This is how you would tell the kernel the A2410 oscillator frequencies: 224# The used frequencies are the defaults, and do not need option setting 225#options ULOWELL_OSC1=36000000 226#options ULOWELL_OSC2=66667000 227 228# This is how you specify the blitting speed, higher values may speed up blits 229# a littel bit. If you raise this value too much some trash may appear. 230# the commented version is the default. 231#options RH_MEMCLK=61000000 232# this option enables the 64 bit sprite which does not work 233# for quite a few people. E.g. The cursor sprite will turn to a block 234# when moved to the top of the screen in X. 235#options RH_64BIT_SPRITE 236# enables fast scroll code appears to now work on 040 systems. 237#options RETINA_SPEED_HACK 238# enables the Hardwarecursor which does not work on some systems. 239#options RH_HARDWARECURSOR 240 241# wscons aware interface to amiga custom chips. 242# If you enable it enable also wskbd. 243# 244amidisplaycc0 at mainbus0 # wscons interface to custom chips 245wsdisplay0 at amidisplaycc0 console ? 246options WSEMUL_VT100 247options FONT_BOLD8x16 248options FONT_VT220L8x10 249 250 251msc0 at zbus0 # A2232 MSC multiport serial. 252mfc0 at zbus0 # MultiFaceCard I/O board 253mfcs0 at mfc0 unit 0 # MFC serial 254mfcs1 at mfc0 unit 1 # MFC serial 255#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 256#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 257#mfcs2 at mfc1 unit 0 258#mfcs3 at mfc1 unit 1 259#mfcp1 at mfc1 unit 0 260 261hyper* at zbus? # zbus HyperCom3/3+/4/4+ 262#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 263com* at hyper? port ? # Hypercom3/4 serial ports 264lpt* at hyper? port ? # Hypercom3+/4+ parallel port 265 266#options IOBZCLOCK=22118400 # default, uncomment the next line 267#options IOBZCLOCK=24000000 # if needed. 268 269iobl* at zbus? # zbus IOBlix 270com* at iobl? port ? # IOBlix serial ports 271lpt* at iobl? port ? # IOBlix parallel ports 272 273 274# 275# Keyboard device. Optionally can attach a wskbd. 276# wskbd works together with a wsdisplay so enable them both if you will. 277# Don't enable wskbd if you use ite. 278# 279# XXX in std.amiga: kbd0 at mainbus0 280wskbd0 at kbd0 console ? 281 282 283# 284# Amiga Mainboard devices (sans graphics and keyboard) 285# 286 287ser0 at mainbus0 # Amiga onboard serial 288par0 at mainbus0 # Amiga onboard parallel 289ms* at mainbus0 # Amiga mice 290fdc0 at mainbus0 # Amiga FDC 291fd* at fdc0 unit ? # floppy disks on the later 292a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 293a2kbbc0 at mainbus0 # A2000 battery backed clock 294aucc* at mainbus0 # Amiga CC audio 295audio* at aucc? 296 297# 298# DraCo Mainboard devices (sans keyboard) 299# 300 301drbbc0 at mainbus0 # DraCo battery backed clock 302drsupio0 at mainbus0 # DraCo superio chip 303com* at drsupio? port ? # DraCo serial 304lpt0 at drsupio? port ? # DraCo parallel 305 306# 307# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 308# 309 310 311repulse* at zbus0 # ALiENDESiGN Repulse 312audio* at repulse? 313 314toccata* at zbus0 # MacroSystem GmbH Toccata 315audio* at toccata? 316 317# Ethernet cards: 318le* at zbus0 # A2065, Ameristar, Ariadne 319ne* at zbus0 # AriadneII, X-surf 320ed* at zbus0 # Hydra, ASDG LanRover 321es* at zbus0 # CEI A4066 EthernetPLUS 322qn* at zbus0 # Quicknet 323 324# Arcnet 325bah* at zbus0 # C=/Ameristar A2060 / 560 326 327# Greater Valley Product Bus 328gvpbus* at zbus0 329 330# scsi stuff, all possible 331gtsc0 at gvpbus? # GVP series II scsi 332scsibus* at gtsc0 333ahsc0 at mainbus0 # A3000 scsi 334scsibus* at ahsc0 335atzsc0 at zbus0 # A2091 scsi 336scsibus* at atzsc0 337wstsc0 at zbus0 # Wordsync II scsi 338scsibus* at wstsc0 339ivsc0 at zbus0 # IVS scsi 340scsibus* at ivsc0 341mlhsc0 at zbus0 # Hacker scsi 342scsibus* at mlhsc0 343otgsc0 at zbus0 # 12 gauge scsi 344scsibus* at otgsc0 345zssc0 at zbus0 # Zeus scsi 346scsibus* at zssc0 347mgnsc0 at zbus0 # Magnum scsi 348scsibus* at mgnsc0 349wesc0 at zbus0 # Warp Engine scsi 350scsibus* at wesc0 351afsc0 at zbus0 # A4091 scsi 352scsibus* at afsc0 353aftsc0 at mainbus0 # A4000T scsi 354scsibus* at aftsc0 355flsc0 at zbus0 # FastlaneZ3 scsi 356scsibus* at flsc0 357bzsc0 at zbus0 # Blizzard 1230 I,II scsi 358scsibus* at bzsc0 359bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 360scsibus* at bzivsc0 361bztzsc0 at zbus0 # Blizzard 2060 scsi 362scsibus* at bztzsc0 363cbsc0 at zbus0 # CyberSCSI I 364scsibus* at cbsc0 365cbiisc0 at zbus0 # CyberSCSI II 366scsibus* at cbiisc0 367cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 368scsibus* at cbiiisc0 369empsc0 at zbus0 # Emplant scsi 370scsibus* at empsc0 371#idesc0 at mainbus0 # A4000 & A1200 IDE 372#scsibus* at idesc0 373 374# <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 375# <<< are uncommented >>> 376wdc0 at mainbus0 # A4000 & A1200 IDE bus 377wd* at wdc? drive ? # + drives 378atapibus* at wdc? channel ? # ATAPI bus 379cd* at atapibus? drive ? # ATAPI CD-ROM drives 380sd* at atapibus? drive ? # ATAPI disk drives 381 382pccard0 at mainbus0 383pcmcia* at pccard0 384com* at pcmcia? function ? # Modems and serial cards 385pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 386aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 387wdc* at pcmcia? function ? 388awi* at pcmcia? function ? # BayStack 650 (802.11FH) 389ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 390mbe* at pcmcia? function ? # MB8696x based Ethernet 391ne* at pcmcia? function ? # NE2000-compatible Ethernet 392sm* at pcmcia? function ? # Megahertz Ethernet 393mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 394com* at mhzc? 395sm* at mhzc? 396 397 398drsc0 at mainbus0 # DraCo scsi 399scsibus* at drsc0 400 401 402# each hard drive from low target to high 403# will configure to the next available sd unit number 404sd* at scsibus? target ? lun ? # scsi disks 405st* at scsibus? target ? lun ? # scsi tapes 406cd* at scsibus? target ? lun ? # scsi cds 407ch* at scsibus? target ? lun ? # scsi autochangers 408ss* at scsibus? target ? lun ? # scsi scanner 409uk* at scsibus? target ? lun ? # scsi unknown 410 411pseudo-device loop # loopback network interface 412pseudo-device sl 1 # SLIP network interfaces 413pseudo-device ppp 1 # PPP network interfaces 414pseudo-device pppoe # PPP over Ethernet (RFC 2516) 415pseudo-device tun 1 # network tunnel line discipline 416#pseudo-device gre 2 # generic L3 over IP tunnel 417pseudo-device bpfilter 16 # Berkeley packet filter 418pseudo-device ipfilter # IP Filter package 419pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 420#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 421#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 422pseudo-device vlan # IEEE 802.1q encapsulation 423pseudo-device bridge # simple inter-network bridging 424#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 425 426pseudo-device view 4 # views (needed for grfcc) 427pseudo-device pty # pseudo-terminals 428pseudo-device clockctl # user control of clock subsystem 429 430pseudo-device vnd 4 # vnode pseudo-disks 431pseudo-device ccd 4 # concatenated disk devices 432#pseudo-device cgd 4 # cryptographic disk devices 433pseudo-device raid 8 # RAIDframe disk driver 434options RAID_AUTOCONFIG # auto-configuration of RAID components 435# Options to enable various other RAIDframe RAID types. 436# options RF_INCLUDE_EVENODD=1 437# options RF_INCLUDE_RAID5_RS=1 438# options RF_INCLUDE_PARITYLOGGING=1 439# options RF_INCLUDE_CHAINDECLUSTER=1 440# options RF_INCLUDE_INTERDECLUSTER=1 441# options RF_INCLUDE_PARITY_DECLUSTERING=1 442# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 443 444pseudo-device rnd # /dev/random and in-kernel generator 445#options RND_COM # use "com" randomness as well (BROKEN) 446 447config netbsd root on ? type ? 448