WSCONS revision 1.19
1# $NetBSD: WSCONS,v 1.19 2003/10/08 11:03:55 bouyer Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.16 2003/10/08 11:02:45 bouyer Exp $
7#
8# GENERIC machine description file
9#
10# This machine description file is used to generate the default NetBSD
11# kernel.  The generic kernel does not include all options, subsystems
12# and device drivers, but should be useful for most applications.
13#
14# The machine description file can be customised for your specific
15# machine to reduce the kernel size and improve its performance.
16#
17# For further information on compiling NetBSD kernels, see the config(8)
18# man page.
19#
20# For further information on hardware support for this architecture, see
21# the intro(4) man page.  For further information about kernel options
22# for this architecture, see the options(4) man page.  For an explanation
23# of each device driver in this file see the section 4 man page for the
24# device.
25
26
27include "arch/amiga/conf/std.amiga"
28
29options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
30
31#ident 		"GENERIC-$Revision: 1.19 $"
32
33
34maxusers	8
35options 	RTC_OFFSET=0
36
37#
38# mainboards to support (in addition to Amiga)
39#
40options 	DRACO
41options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
42				# MC68060 with an OS ROM up to (at least)
43				# V40 (OS3.1) and want to boot with the
44				# bootblock.
45				# You do not need this if you have a DraCo,
46				# have no 68060 or NEVER use the bootblock
47options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
48#
49# processors this kernel should support
50#
51options 	M68060		# support for 060
52options 	M060SP		# MC68060 software support (Required for 060)
53options 	M68040		# support for 040
54options 	FPSP		# MC68040 floating point support
55options 	M68030		# support for 030
56options 	M68020		# support for 020/851
57options 	FPU_EMULATE	# FPU emulation
58
59#
60# Networking options
61#
62options 	INET		# IP networking support (Required)
63options 	INET6		# IPV6
64#options 	IPSEC		# IP security
65#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
66#options 	IPSEC_DEBUG	# debug for IP security
67#options 	GATEWAY		# Packet forwarding
68#options 	DIRECTED_BROADCAST	# Broadcast across subnets
69
70#options 	MROUTING	# Multicast routing
71options 	NS		# XNS
72#options 	NSIP		# XNS tunneling over IP
73options 	ISO,TPIP	# OSI
74#options 	EON		# OSI tunneling over IP
75options 	CCITT,LLC,HDLC	# X.25
76options 	NETATALK	# AppleTalk networking protocols
77#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
78
79options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
80options 	PPP_DEFLATE	# Deflate compression support for PPP
81options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
82options 	PFIL_HOOKS	# pfil(9) packet filter hooks
83options 	IPFILTER_LOG	# ipmon(8) log support
84#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
85
86# Filesystems
87file-system 	FFS		# Berkeley fast file system
88file-system 	EXT2FS		# second extended file system (linux)
89#file-system 	LFS		# log-structured filesystem (experimental)
90
91file-system 	MFS		# Memory based filesystem
92
93file-system 	NFS		# Network File System client side code
94file-system 	ADOSFS		# AmigaDOS file system
95file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
96file-system 	MSDOSFS		# MS-DOS filesystem
97
98file-system 	KERNFS		# kernel data-structure filesystem
99
100file-system 	FDESC		# user file descriptor filesystem
101file-system 	NULLFS		# loopback filesystem
102file-system 	OVERLAY		# overlay filesystem
103#file-system 	PORTAL		# Portal filesystem
104file-system 	PROCFS		# /proc filesystem
105file-system 	UMAPFS		# NULLFS + uid and gid remapping
106file-system 	UNION		# union filesystem
107
108# Filesystem options
109
110#options 	FFS_EI		# FFS Endian Independant support
111
112options 	QUOTA		# User and group quotas in FFS
113options 	SOFTDEP		# FFS soft updates support.
114options 	NFSSERVER	# Network File System server side code
115
116#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
117				# immutable) behave as system flags.
118
119#
120# Compatibility options for various existing systems
121#
122
123#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
124options 	COMPAT_43	# compatibility with 4.3BSD interfaces
125options 	COMPAT_09	# compatibility with NetBSD 0.9
126options 	COMPAT_10	# compatibility with NetBSD 1.0
127options 	COMPAT_12	# compatibility with NetBSD 1.2
128options 	COMPAT_13	# compatibility with NetBSD 1.3
129options 	COMPAT_14	# compatibility with NetBSD 1.4
130options 	COMPAT_15	# compatibility with NetBSD 1.5
131options 	COMPAT_16	# compatibility with NetBSD 1.6
132options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
133options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
134options 	COMPAT_NOMID	# allow nonvalid machine id executables
135#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
136
137options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
138options 	COMPAT_AOUT_M68K # actually make some system calls work.
139
140#
141# Support for System V IPC facilities.
142#
143options 	SYSVSHM		# System V-like shared memory
144options 	SYSVMSG		# System V-like messages
145options 	SYSVSEM		# System V-like semaphores
146#options 	SEMMNI=10	# number of semaphore identifiers
147#options 	SEMMNS=60	# number of semaphores in system
148#options 	SEMUME=10	# max number of undo entries per process
149#options 	SEMMNU=30	# number of undo structures in system
150
151#
152# Support for various kernel options
153#
154
155options 	KTRACE		# system call tracing support
156options 	SYSTRACE	# system call vetting via systrace(1)
157options 	LKM		# Loadable kernel modules
158#options 	INSECURE	# disable kernel security levels
159options 	SCSIVERBOSE	# human readable SCSI error messages
160options 	USERCONF	# userconf(4) support
161options 	NTP		# NTP phase/frequency locked loop
162#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
163
164# Enable experimental buffer queue strategy for better responsiveness under 
165# high disk I/O load. Use it with caution - it's not proven to be stable yet.
166#options 	NEW_BUFQ_STRATEGY
167
168#
169# Misc. debugging options
170#
171options 	DDB		# Kernel debugger
172#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
173options 	DIAGNOSTIC	# Extra kernel sanity checks
174#options 	DEBUG		# Enable misc. kernel debugging code
175#options 	SYSCALL_DEBUG	# debug all syscalls.
176#options 	SCSIDEBUG	# Add SCSI debugging statements
177#options 	PANICBUTTON	# Forced crash via keypress (?)
178
179#
180# Amiga specific options
181#
182#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
183				# first bank of RAM. (default: unlimited)
184#options 	NKPTADD=4	# set this for 4 additional KPT pages
185#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
186				# per 16 MB (1<<24 bytes) of RAM
187				# uncomment and decrease this, or uncomment and
188				# increase NKPTADD if you get "out of PT pages"
189				# panics.
190
191# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
192# before the 10 secondinterval ends, or that KBDRESET does work at all.
193#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
194
195# These options improve performance with the built-in serial port
196# on slower Amigas.  Try the larger buffers first then lev6_defer.
197#options 	SERIBUF_SIZE=4096
198#options 	SEROBUF_SIZE=32
199#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
200
201#options	DEVRELOAD	# implement /dev/reload
202#				# currently only works for a.out kernels
203
204options 	RETINACONSOLE	# enable code to allow retina to be console
205options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
206options 	CL5426CONSOLE	# Cirrus console
207options 	CV64CONSOLE	# CyberVision console
208options 	TSENGCONSOLE	# Tseng console
209options 	CV3DCONSOLE	# CyberVision 64/3D console
210
211options 	GRF_ECS		# Enhanced Chip Set
212options 	GRF_NTSC	# NTSC
213options 	GRF_PAL		# PAL
214options 	GRF_A2024	# Support for the A2024
215options 	GRF_AGA		# AGA Chip Set
216options 	GRF_AGA_VGA	# AGA VGAONLY timing
217options 	GRF_SUPER72	# AGA Super-72
218#options 	KFONT_8X11	# 8x11 font
219
220# select a font for the console according to the character set and keymap
221# you want to use
222options        KFONT_CONS_ISO8859_1
223#options         KFONT_CONS_ISO8859_2
224
225# This is how you would tell the kernel the A2410 oscillator frequencies:
226# The used frequencies are the defaults, and do not need option setting
227#options 	ULOWELL_OSC1=36000000
228#options 	ULOWELL_OSC2=66667000
229
230# This is how you specify the blitting speed, higher values may speed up blits
231# a littel bit.  If you raise this value too much some trash may appear.
232# the commented version is the default.
233#options 	RH_MEMCLK=61000000
234# this option enables the 64 bit sprite which does not work
235# for quite a few people.  E.g. The cursor sprite will turn to a block
236# when moved to the top of the screen in X.
237#options 	RH_64BIT_SPRITE
238# enables fast scroll code appears to now work on 040 systems.
239#options 	RETINA_SPEED_HACK
240# enables the Hardwarecursor which does not work on some systems.
241#options 	RH_HARDWARECURSOR
242
243# wscons aware interface to amiga custom chips.
244# If you enable it enable also wskbd.
245#
246amidisplaycc0	at mainbus0		# wscons interface to custom chips
247wsdisplay0	at amidisplaycc0 console ?
248options 	WSEMUL_VT100
249options 	FONT_BOLD8x16
250options 	FONT_VT220L8x10
251
252
253msc0		at zbus0		# A2232 MSC multiport serial.
254mfc0		at zbus0		# MultiFaceCard I/O board
255mfcs0		at mfc0 unit 0		# MFC serial
256mfcs1		at mfc0 unit 1		# MFC serial
257#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
258#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
259#mfcs2		at mfc1 unit 0
260#mfcs3		at mfc1 unit 1
261#mfcp1		at mfc1 unit 0
262
263hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
264#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
265com*		at hyper? port ?	# Hypercom3/4 serial ports
266lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
267
268#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
269#options 	IOBZCLOCK=24000000	# if needed.
270
271iobl*		at zbus?		# zbus IOBlix
272com*		at iobl? port ?		# IOBlix serial ports
273lpt*		at iobl? port ?		# IOBlix parallel ports
274
275
276#
277# Keyboard device. Optionally can attach a wskbd.
278# wskbd works together with a wsdisplay so enable them both if you will.
279# Don't enable wskbd if you use ite.
280#
281# XXX in std.amiga: kbd0 at mainbus0
282wskbd0		at kbd0 console ?
283
284
285#
286# Amiga Mainboard devices (sans graphics and keyboard)
287#
288
289ser0		at mainbus0		# Amiga onboard serial
290par0		at mainbus0		# Amiga onboard parallel
291ms*		at mainbus0		# Amiga mice
292fdc0		at mainbus0		# Amiga FDC
293fd*		at fdc0 unit ?		# floppy disks on the later
294a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
295a2kbbc0 	at mainbus0		# A2000 battery backed clock
296aucc*		at mainbus0		# Amiga CC audio
297audio*		at aucc?
298
299wsmouse*	at ms?
300
301#
302# DraCo Mainboard devices (sans keyboard)
303#
304
305drbbc0		at mainbus0		# DraCo battery backed clock
306drsupio0	at mainbus0		# DraCo superio chip
307com*		at drsupio? port ?	# DraCo serial
308lpt0		at drsupio? port ?	# DraCo parallel
309
310#
311# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
312#
313
314
315repulse*	at zbus0		# ALiENDESiGN Repulse
316audio*		at repulse?
317
318toccata*	at zbus0		# MacroSystem GmbH Toccata
319audio*		at toccata?
320
321# Ethernet cards:
322le*		at zbus0		# A2065, Ameristar, Ariadne
323ne*		at zbus0		# AriadneII, X-surf
324ed*		at zbus0		# Hydra, ASDG LanRover
325es*		at zbus0		# CEI A4066 EthernetPLUS
326qn*		at zbus0		# Quicknet
327
328# Arcnet
329bah*		at zbus0		# C=/Ameristar A2060 / 560
330
331# Greater Valley Product Bus
332gvpbus* 	at zbus0
333
334# scsi stuff, all possible
335gtsc0		at gvpbus?		# GVP series II scsi
336scsibus*	at gtsc0
337ahsc0		at mainbus0		# A3000 scsi
338scsibus*	at ahsc0
339atzsc0		at zbus0		# A2091 scsi
340scsibus*	at atzsc0
341wstsc0		at zbus0		# Wordsync II scsi
342scsibus*	at wstsc0
343ivsc0		at zbus0		# IVS scsi
344scsibus*	at ivsc0
345mlhsc0		at zbus0		# Hacker scsi
346scsibus*	at mlhsc0
347otgsc0		at zbus0		# 12 gauge scsi
348scsibus*	at otgsc0
349zssc0		at zbus0		# Zeus scsi
350scsibus*	at zssc0
351mgnsc0		at zbus0		# Magnum scsi
352scsibus*	at mgnsc0
353wesc0		at zbus0		# Warp Engine scsi
354scsibus*	at wesc0
355afsc0		at zbus0		# A4091 scsi
356scsibus*	at afsc0
357aftsc0		at mainbus0		# A4000T scsi
358scsibus*	at aftsc0
359flsc0		at zbus0		# FastlaneZ3 scsi
360scsibus*	at flsc0
361bzsc0		at zbus0		# Blizzard 1230 I,II scsi
362scsibus*	at bzsc0
363bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
364scsibus*	at bzivsc0
365bztzsc0 	at zbus0		# Blizzard 2060 scsi
366scsibus*	at bztzsc0
367cbsc0		at zbus0		# CyberSCSI I
368scsibus*	at cbsc0
369cbiisc0 	at zbus0		# CyberSCSI II
370scsibus*	at cbiisc0
371cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
372scsibus*	at cbiiisc0
373empsc0		at zbus0		# Emplant scsi
374scsibus*	at empsc0
375#idesc0		at mainbus0		# A4000 & A1200 IDE
376#scsibus*	at idesc0
377
378# <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
379# <<< are uncommented >>>
380wdc0		at mainbus0		# A4000 & A1200 IDE bus
381atabus* 	at wdc? channel ?	# ATA bus
382wd*		at atabus? drive ?	#  + drives
383atapibus*	at atabus?		# ATAPI bus
384cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
385sd*		at atapibus? drive ?	# ATAPI disk drives
386
387pccard0		at mainbus0
388pcmcia*		at pccard0
389com*		at pcmcia? function ?		# Modems and serial cards
390pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
391aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
392wdc*		at pcmcia? function ?
393awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
394ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
395mbe*		at pcmcia? function ?		# MB8696x based Ethernet
396ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
397sm*		at pcmcia? function ?		# Megahertz Ethernet
398mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
399com*		at mhzc?
400sm*		at mhzc?
401
402
403drsc0		at mainbus0		# DraCo scsi
404scsibus*	at drsc0
405
406
407# each hard drive from low target to high
408# will configure to the next available sd unit number
409sd*	at scsibus? target ? lun ?	# scsi disks
410st*	at scsibus? target ? lun ?	# scsi tapes
411cd*	at scsibus? target ? lun ?	# scsi cds
412ch*	at scsibus? target ? lun ?	# scsi autochangers
413ss*	at scsibus? target ? lun ?	# scsi scanner
414uk*	at scsibus? target ? lun ?	# scsi unknown
415
416pseudo-device	loop			# loopback network interface
417pseudo-device	sl		1	# SLIP network interfaces
418pseudo-device	ppp		1	# PPP network interfaces
419pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
420pseudo-device	tun		1	# network tunnel line discipline
421#pseudo-device	gre		2	# generic L3 over IP tunnel
422pseudo-device	bpfilter	16	# Berkeley packet filter
423pseudo-device	ipfilter		# IP Filter package
424pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
425#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
426#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
427pseudo-device	vlan			# IEEE 802.1q encapsulation
428pseudo-device	bridge			# simple inter-network bridging
429#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
430
431pseudo-device	view		4	# views (needed for grfcc)
432pseudo-device	pty			# pseudo-terminals
433pseudo-device	clockctl		# user control of clock subsystem
434
435pseudo-device	vnd		4	# vnode pseudo-disks
436pseudo-device	ccd		4	# concatenated disk devices
437#pseudo-device	cgd		4	# cryptographic disk devices
438pseudo-device	raid		8	# RAIDframe disk driver
439options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
440# Options to enable various other RAIDframe RAID types.
441# options 	RF_INCLUDE_EVENODD=1
442# options 	RF_INCLUDE_RAID5_RS=1
443# options 	RF_INCLUDE_PARITYLOGGING=1
444# options 	RF_INCLUDE_CHAINDECLUSTER=1
445# options 	RF_INCLUDE_INTERDECLUSTER=1
446# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
447# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
448
449pseudo-device	rnd			# /dev/random and in-kernel generator
450#options 	RND_COM			# use "com" randomness as well (BROKEN)
451
452pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
453
454config	netbsd root on ? type ?
455