WSCONS revision 1.30
1 # $NetBSD: WSCONS,v 1.30 2005/02/20 17:57:39 jdolecek Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.33 2005/02/20 17:57:02 jdolecek Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.30 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options DRACO 41 options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47 options P5PPC68KBOARD # Phase5 PPC/68K board support 48 # 49 # processors this kernel should support 50 # 51 options M68060 # support for 060 52 options M060SP # MC68060 software support (Required for 060) 53 options M68040 # support for 040 54 options FPSP # MC68040 floating point support 55 options M68030 # support for 030 56 options M68020 # support for 020/851 57 options FPU_EMULATE # FPU emulation 58 59 # 60 # Networking options 61 # 62 options INET # IP networking support (Required) 63 options INET6 # IPV6 64 #options IPSEC # IP security 65 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66 #options IPSEC_DEBUG # debug for IP security 67 #options GATEWAY # Packet forwarding 68 #options DIRECTED_BROADCAST # Broadcast across subnets 69 70 #options MROUTING # Multicast routing 71 #options PIM # Protocol Independent Multicast 72 options NS # XNS 73 #options NSIP # XNS tunneling over IP 74 options ISO,TPIP # OSI 75 #options EON # OSI tunneling over IP 76 options CCITT,LLC,HDLC # X.25 77 options NETATALK # AppleTalk networking protocols 78 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 79 80 options PPP_BSDCOMP # BSD-Compress compression support for PPP 81 options PPP_DEFLATE # Deflate compression support for PPP 82 options PPP_FILTER # Active filter support for PPP (requires bpf) 83 options PFIL_HOOKS # pfil(9) packet filter hooks 84 options IPFILTER_LOG # ipmon(8) log support 85 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 86 87 #options ALTQ # Manipulate network interfaces' output queues 88 #options ALTQ_BLUE # Stochastic Fair Blue 89 #options ALTQ_CBQ # Class-Based Queueing 90 #options ALTQ_CDNR # Diffserv Traffic Conditioner 91 #options ALTQ_FIFOQ # First-In First-Out Queue 92 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 93 #options ALTQ_HFSC # Hierarchical Fair Service Curve 94 #options ALTQ_LOCALQ # Local queueing discipline 95 #options ALTQ_PRIQ # Priority Queueing 96 #options ALTQ_RED # Random Early Detection 97 #options ALTQ_RIO # RED with IN/OUT 98 #options ALTQ_WFQ # Weighted Fair Queueing 99 100 # Filesystems 101 file-system FFS # Berkeley fast file system 102 file-system EXT2FS # second extended file system (linux) 103 #file-system LFS # log-structured filesystem (experimental) 104 105 file-system MFS # Memory based filesystem 106 107 file-system NFS # Network File System client side code 108 file-system ADOSFS # AmigaDOS file system 109 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 110 file-system MSDOSFS # MS-DOS filesystem 111 112 file-system KERNFS # kernel data-structure filesystem 113 114 file-system FDESC # user file descriptor filesystem 115 file-system NULLFS # loopback filesystem 116 file-system OVERLAY # overlay filesystem 117 #file-system PORTAL # Portal filesystem 118 file-system PROCFS # /proc filesystem 119 file-system UMAPFS # NULLFS + uid and gid remapping 120 file-system UNION # union filesystem 121 file-system SMBFS # experimental - CIFS; also needs nsmb (below) 122 123 # Filesystem options 124 125 #options FFS_EI # FFS Endian Independant support 126 127 options QUOTA # User and group quotas in FFS 128 options SOFTDEP # FFS soft updates support. 129 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 130 options NFSSERVER # Network File System server side code 131 #options FFS_NO_SNAPSHOT # ffs snapshots 132 133 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 134 # immutable) behave as system flags. 135 136 # 137 # Compatibility options for various existing systems 138 # 139 140 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 141 options COMPAT_43 # compatibility with 4.3BSD interfaces 142 options COMPAT_09 # compatibility with NetBSD 0.9 143 options COMPAT_10 # compatibility with NetBSD 1.0 144 options COMPAT_12 # compatibility with NetBSD 1.2 145 options COMPAT_13 # compatibility with NetBSD 1.3 146 options COMPAT_14 # compatibility with NetBSD 1.4 147 options COMPAT_15 # compatibility with NetBSD 1.5 148 options COMPAT_16 # compatibility with NetBSD 1.6 149 options COMPAT_SUNOS # Support to run Sun (m68k) executables 150 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 151 options COMPAT_NOMID # allow nonvalid machine id executables 152 #options COMPAT_LINUX # Support to run Linux/m68k executables 153 154 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 155 options COMPAT_AOUT_M68K # actually make some system calls work. 156 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 157 158 # 159 # Support for System V IPC facilities. 160 # 161 options SYSVSHM # System V-like shared memory 162 options SYSVMSG # System V-like messages 163 options SYSVSEM # System V-like semaphores 164 #options SEMMNI=10 # number of semaphore identifiers 165 #options SEMMNS=60 # number of semaphores in system 166 #options SEMUME=10 # max number of undo entries per process 167 #options SEMMNU=30 # number of undo structures in system 168 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 169 170 # 171 # Support for various kernel options 172 # 173 174 options KTRACE # system call tracing support 175 options SYSTRACE # system call vetting via systrace(1) 176 options LKM # Loadable kernel modules 177 #options INSECURE # disable kernel security levels 178 options SCSIVERBOSE # human readable SCSI error messages 179 options USERCONF # userconf(4) support 180 options NTP # NTP phase/frequency locked loop 181 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 182 183 # Enable experimental buffer queue strategy for better responsiveness under 184 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 185 #options NEW_BUFQ_STRATEGY 186 187 # 188 # Misc. debugging options 189 # 190 options DDB # Kernel debugger 191 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 192 options DIAGNOSTIC # Extra kernel sanity checks 193 #options DEBUG # Enable misc. kernel debugging code 194 #options SYSCALL_DEBUG # debug all syscalls. 195 #options SCSIDEBUG # Add SCSI debugging statements 196 #options PANICBUTTON # Forced crash via keypress (?) 197 198 # 199 # Amiga specific options 200 # 201 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 202 # first bank of RAM. (default: unlimited) 203 #options NKPTADD=4 # set this for 4 additional KPT pages 204 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 205 # per 16 MB (1<<24 bytes) of RAM 206 # uncomment and decrease this, or uncomment and 207 # increase NKPTADD if you get "out of PT pages" 208 # panics. 209 210 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 211 # before the 10 secondinterval ends, or that KBDRESET does work at all. 212 #options KBDRESET # sync on Ctrl-Amiga-Amiga 213 214 # These options improve performance with the built-in serial port 215 # on slower Amigas. Try the larger buffers first then lev6_defer. 216 #options SERIBUF_SIZE=4096 217 #options SEROBUF_SIZE=32 218 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 219 220 #options DEVRELOAD # implement /dev/reload 221 # # currently only works for a.out kernels 222 223 options RETINACONSOLE # enable code to allow retina to be console 224 options ULOWELLCONSOLE # enable code to allow a2410 to be console 225 options CL5426CONSOLE # Cirrus console 226 options CV64CONSOLE # CyberVision console 227 options TSENGCONSOLE # Tseng console 228 options CV3DCONSOLE # CyberVision 64/3D console 229 230 options GRF_ECS # Enhanced Chip Set 231 options GRF_NTSC # NTSC 232 options GRF_PAL # PAL 233 options GRF_A2024 # Support for the A2024 234 options GRF_AGA # AGA Chip Set 235 options GRF_AGA_VGA # AGA VGAONLY timing 236 options GRF_SUPER72 # AGA Super-72 237 #options KFONT_8X11 # 8x11 font 238 239 # select a font for the console according to the character set and keymap 240 # you want to use 241 options KFONT_CONS_ISO8859_1 242 #options KFONT_CONS_ISO8859_2 243 244 # This is how you would tell the kernel the A2410 oscillator frequencies: 245 # The used frequencies are the defaults, and do not need option setting 246 #options ULOWELL_OSC1=36000000 247 #options ULOWELL_OSC2=66667000 248 249 # This is how you specify the blitting speed, higher values may speed up blits 250 # a littel bit. If you raise this value too much some trash may appear. 251 # the commented version is the default. 252 #options RH_MEMCLK=61000000 253 # this option enables the 64 bit sprite which does not work 254 # for quite a few people. E.g. The cursor sprite will turn to a block 255 # when moved to the top of the screen in X. 256 #options RH_64BIT_SPRITE 257 # enables fast scroll code appears to now work on 040 systems. 258 #options RETINA_SPEED_HACK 259 # enables the Hardwarecursor which does not work on some systems. 260 #options RH_HARDWARECURSOR 261 262 # wscons aware interface to amiga custom chips. 263 # If you enable it enable also wskbd. 264 # 265 amidisplaycc0 at mainbus0 # wscons interface to custom chips 266 wsdisplay0 at amidisplaycc0 console ? 267 options WSEMUL_VT100 268 options FONT_VT220L8x10 269 options FONT_VT220ISO8x16 270 271 272 msc0 at zbus0 # A2232 MSC multiport serial. 273 mfc0 at zbus0 # MultiFaceCard I/O board 274 mfcs0 at mfc0 unit 0 # MFC serial 275 mfcs1 at mfc0 unit 1 # MFC serial 276 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 277 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 278 #mfcs2 at mfc1 unit 0 279 #mfcs3 at mfc1 unit 1 280 #mfcp1 at mfc1 unit 0 281 282 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 283 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 284 com* at hyper? port ? # Hypercom3/4 serial ports 285 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 286 287 #options IOBZCLOCK=22118400 # default, uncomment the next line 288 #options IOBZCLOCK=24000000 # if needed. 289 290 iobl* at zbus? # zbus IOBlix 291 com* at iobl? port ? # IOBlix serial ports 292 lpt* at iobl? port ? # IOBlix parallel ports 293 294 295 # 296 # Keyboard device. Optionally can attach a wskbd. 297 # wskbd works together with a wsdisplay so enable them both if you will. 298 # Don't enable wskbd if you use ite. 299 # 300 # XXX in std.amiga: kbd0 at mainbus0 301 wskbd0 at kbd0 console ? 302 303 304 # 305 # Amiga Mainboard devices (sans graphics and keyboard) 306 # 307 308 ser0 at mainbus0 # Amiga onboard serial 309 par0 at mainbus0 # Amiga onboard parallel 310 ms* at mainbus0 # Amiga mice 311 fdc0 at mainbus0 # Amiga FDC 312 fd* at fdc0 unit ? # floppy disks on the later 313 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 314 a2kbbc0 at mainbus0 # A2000 battery backed clock 315 aucc* at mainbus0 # Amiga CC audio 316 audio* at aucc? 317 318 wsmouse* at ms? 319 320 # 321 # DraCo Mainboard devices (sans keyboard) 322 # 323 324 drbbc0 at mainbus0 # DraCo battery backed clock 325 drsupio0 at mainbus0 # DraCo superio chip 326 com* at drsupio? port ? # DraCo serial 327 lpt0 at drsupio? port ? # DraCo parallel 328 329 # 330 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 331 # 332 333 334 repulse* at zbus0 # ALiENDESiGN Repulse 335 audio* at repulse? 336 337 toccata* at zbus0 # MacroSystem GmbH Toccata 338 audio* at toccata? 339 340 # Ethernet cards: 341 le* at zbus0 # A2065, Ameristar, Ariadne 342 ne* at zbus0 # AriadneII, X-surf 343 ed* at zbus0 # Hydra, ASDG LanRover 344 es* at zbus0 # CEI A4066 EthernetPLUS 345 qn* at zbus0 # Quicknet 346 347 # Arcnet 348 bah* at zbus0 # C=/Ameristar A2060 / 560 349 350 # Greater Valley Product Bus 351 gvpbus* at zbus0 352 353 # scsi stuff, all possible 354 gtsc0 at gvpbus? # GVP series II scsi 355 scsibus* at gtsc0 356 ahsc0 at mainbus0 # A3000 scsi 357 scsibus* at ahsc0 358 atzsc0 at zbus0 # A2091 scsi 359 scsibus* at atzsc0 360 wstsc0 at zbus0 # Wordsync II scsi 361 scsibus* at wstsc0 362 ivsc0 at zbus0 # IVS scsi 363 scsibus* at ivsc0 364 mlhsc0 at zbus0 # Hacker scsi 365 scsibus* at mlhsc0 366 otgsc0 at zbus0 # 12 gauge scsi 367 scsibus* at otgsc0 368 zssc0 at zbus0 # Zeus scsi 369 scsibus* at zssc0 370 mgnsc0 at zbus0 # Magnum scsi 371 scsibus* at mgnsc0 372 wesc0 at zbus0 # Warp Engine scsi 373 scsibus* at wesc0 374 afsc0 at zbus0 # A4091 scsi 375 scsibus* at afsc0 376 aftsc0 at mainbus0 # A4000T scsi 377 scsibus* at aftsc0 378 flsc0 at zbus0 # FastlaneZ3 scsi 379 scsibus* at flsc0 380 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 381 scsibus* at bzsc0 382 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 383 scsibus* at bzivsc0 384 bztzsc0 at zbus0 # Blizzard 2060 scsi 385 scsibus* at bztzsc0 386 cbsc0 at zbus0 # CyberSCSI I 387 scsibus* at cbsc0 388 cbiisc0 at zbus0 # CyberSCSI II 389 scsibus* at cbiisc0 390 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 391 scsibus* at cbiiisc0 392 empsc0 at zbus0 # Emplant scsi 393 scsibus* at empsc0 394 395 wdc0 at mainbus0 # A4000 & A1200 IDE bus 396 atabus* at wdc? channel ? # ATA bus 397 wd* at atabus? drive ? # + drives 398 atapibus* at atabus? # ATAPI bus 399 cd* at atapibus? drive ? # ATAPI CD-ROM drives 400 sd* at atapibus? drive ? # ATAPI disk drives 401 402 pccard0 at mainbus0 403 pcmcia* at pccard0 404 com* at pcmcia? function ? # Modems and serial cards 405 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 406 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 407 wdc* at pcmcia? function ? 408 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 409 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 410 mbe* at pcmcia? function ? # MB8696x based Ethernet 411 ne* at pcmcia? function ? # NE2000-compatible Ethernet 412 sm* at pcmcia? function ? # Megahertz Ethernet 413 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 414 com* at mhzc? 415 sm* at mhzc? 416 417 418 drsc0 at mainbus0 # DraCo scsi 419 scsibus* at drsc0 420 421 422 # each hard drive from low target to high 423 # will configure to the next available sd unit number 424 sd* at scsibus? target ? lun ? # scsi disks 425 st* at scsibus? target ? lun ? # scsi tapes 426 cd* at scsibus? target ? lun ? # scsi cds 427 ch* at scsibus? target ? lun ? # scsi autochangers 428 ss* at scsibus? target ? lun ? # scsi scanner 429 uk* at scsibus? target ? lun ? # scsi unknown 430 431 pseudo-device loop # loopback network interface 432 pseudo-device sl 1 # SLIP network interfaces 433 pseudo-device ppp 1 # PPP network interfaces 434 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 435 pseudo-device tun 1 # network tunnel line discipline 436 pseudo-device tap # virtual Ethernet 437 #pseudo-device gre 2 # generic L3 over IP tunnel 438 pseudo-device bpfilter 16 # Berkeley packet filter 439 pseudo-device ipfilter # IP Filter package 440 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 441 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 442 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 443 pseudo-device vlan # IEEE 802.1q encapsulation 444 pseudo-device bridge # simple inter-network bridging 445 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 446 #pseudo-device pf # PF packet filter 447 #pseudo-device pflog # PF log if 448 #pseudo-device fss 4 # file system snapshot device 449 450 pseudo-device view 4 # views (needed for grfcc) 451 pseudo-device pty # pseudo-terminals 452 pseudo-device clockctl # user control of clock subsystem 453 454 pseudo-device wsfont # wsfont(4) dynamic font loading support 455 456 pseudo-device vnd 4 # vnode pseudo-disks 457 pseudo-device ccd 4 # concatenated disk devices 458 #pseudo-device cgd 4 # cryptographic disk devices 459 pseudo-device raid 8 # RAIDframe disk driver 460 options RAID_AUTOCONFIG # auto-configuration of RAID components 461 # Options to enable various other RAIDframe RAID types. 462 # options RF_INCLUDE_EVENODD=1 463 # options RF_INCLUDE_RAID5_RS=1 464 # options RF_INCLUDE_PARITYLOGGING=1 465 # options RF_INCLUDE_CHAINDECLUSTER=1 466 # options RF_INCLUDE_INTERDECLUSTER=1 467 # options RF_INCLUDE_PARITY_DECLUSTERING=1 468 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 469 470 pseudo-device rnd # /dev/random and in-kernel generator 471 #options RND_COM # use "com" randomness as well (BROKEN) 472 473 pseudo-device ksyms # /dev/ksyms (kernel symbols) 474 pseudo-device nsmb # experimental - SMB requester 475 476 config netbsd root on ? type ? 477
Indexes created Thu Oct 02 01:09:59 GMT 2025