WSCONS revision 1.36
1 # $NetBSD: WSCONS,v 1.36 2005/07/07 17:05:46 tron Exp $ 2 # 3 # This file was automatically created. 4 # Changes will be lost when make is run in this directory. 5 # 6 # Created from: # NetBSD: GENERIC.in,v 1.37 2005/06/26 12:08:11 rpaulo Exp $ 7 # 8 # GENERIC machine description file 9 # 10 # This machine description file is used to generate the default NetBSD 11 # kernel. The generic kernel does not include all options, subsystems 12 # and device drivers, but should be useful for most applications. 13 # 14 # The machine description file can be customised for your specific 15 # machine to reduce the kernel size and improve its performance. 16 # 17 # For further information on compiling NetBSD kernels, see the config(8) 18 # man page. 19 # 20 # For further information on hardware support for this architecture, see 21 # the intro(4) man page. For further information about kernel options 22 # for this architecture, see the options(4) man page. For an explanation 23 # of each device driver in this file see the section 4 man page for the 24 # device. 25 26 27 include "arch/amiga/conf/std.amiga" 28 29 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 31 #ident "GENERIC-$Revision: 1.36 $" 32 33 34 maxusers 8 35 options RTC_OFFSET=0 36 37 # 38 # mainboards to support (in addition to Amiga) 39 # 40 options DRACO 41 options BB060STUPIDROM # You need this, if you have a non-DraCo 42 # MC68060 with an OS ROM up to (at least) 43 # V40 (OS3.1) and want to boot with the 44 # bootblock. 45 # You do not need this if you have a DraCo, 46 # have no 68060 or NEVER use the bootblock 47 options P5PPC68KBOARD # Phase5 PPC/68K board support 48 # 49 # processors this kernel should support 50 # 51 options M68060 # support for 060 52 options M060SP # MC68060 software support (Required for 060) 53 options M68040 # support for 040 54 options FPSP # MC68040 floating point support 55 options M68030 # support for 030 56 options M68020 # support for 020/851 57 options FPU_EMULATE # FPU emulation 58 59 # 60 # Networking options 61 # 62 options INET # IP networking support (Required) 63 options INET6 # IPV6 64 #options IPSEC # IP security 65 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 66 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 67 #options IPSEC_DEBUG # debug for IP security 68 #options GATEWAY # Packet forwarding 69 #options DIRECTED_BROADCAST # Broadcast across subnets 70 71 #options MROUTING # Multicast routing 72 #options PIM # Protocol Independent Multicast 73 options NS # XNS 74 #options NSIP # XNS tunneling over IP 75 options ISO,TPIP # OSI 76 #options EON # OSI tunneling over IP 77 options CCITT,LLC,HDLC # X.25 78 options NETATALK # AppleTalk networking protocols 79 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 80 81 options PPP_BSDCOMP # BSD-Compress compression support for PPP 82 options PPP_DEFLATE # Deflate compression support for PPP 83 options PPP_FILTER # Active filter support for PPP (requires bpf) 84 options PFIL_HOOKS # pfil(9) packet filter hooks 85 options IPFILTER_LOG # ipmon(8) log support 86 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 87 88 #options ALTQ # Manipulate network interfaces' output queues 89 #options ALTQ_BLUE # Stochastic Fair Blue 90 #options ALTQ_CBQ # Class-Based Queueing 91 #options ALTQ_CDNR # Diffserv Traffic Conditioner 92 #options ALTQ_FIFOQ # First-In First-Out Queue 93 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 94 #options ALTQ_HFSC # Hierarchical Fair Service Curve 95 #options ALTQ_LOCALQ # Local queueing discipline 96 #options ALTQ_PRIQ # Priority Queueing 97 #options ALTQ_RED # Random Early Detection 98 #options ALTQ_RIO # RED with IN/OUT 99 #options ALTQ_WFQ # Weighted Fair Queueing 100 101 # Filesystems 102 file-system FFS # Berkeley fast file system 103 file-system EXT2FS # second extended file system (linux) 104 #file-system LFS # log-structured filesystem (experimental) 105 106 file-system MFS # Memory based filesystem 107 108 file-system NFS # Network File System client side code 109 file-system ADOSFS # AmigaDOS file system 110 file-system CD9660 # ISO 9660 + Rock Ridge filesystem 111 file-system MSDOSFS # MS-DOS filesystem 112 113 file-system KERNFS # kernel data-structure filesystem 114 115 file-system FDESC # user file descriptor filesystem 116 file-system NULLFS # loopback filesystem 117 file-system OVERLAY # overlay filesystem 118 #file-system PORTAL # Portal filesystem 119 file-system PROCFS # /proc filesystem 120 file-system UMAPFS # NULLFS + uid and gid remapping 121 file-system UNION # union filesystem 122 file-system SMBFS # experimental - CIFS; also needs nsmb (below) 123 #file-system PTYFS # experimental - /dev/ptm support 124 125 # Filesystem options 126 127 #options FFS_EI # FFS Endian Independant support 128 129 options QUOTA # User and group quotas in FFS 130 options SOFTDEP # FFS soft updates support. 131 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 132 options NFSSERVER # Network File System server side code 133 #options FFS_NO_SNAPSHOT # ffs snapshots 134 135 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 136 # immutable) behave as system flags. 137 138 # 139 # Compatibility options for various existing systems 140 # 141 142 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 143 options COMPAT_43 # compatibility with 4.3BSD interfaces 144 options COMPAT_09 # compatibility with NetBSD 0.9 145 options COMPAT_10 # compatibility with NetBSD 1.0 146 options COMPAT_12 # compatibility with NetBSD 1.2 147 options COMPAT_13 # compatibility with NetBSD 1.3 148 options COMPAT_14 # compatibility with NetBSD 1.4 149 options COMPAT_15 # compatibility with NetBSD 1.5 150 options COMPAT_16 # compatibility with NetBSD 1.6 151 options COMPAT_20 # compatibility with NetBSD 2.0 152 options COMPAT_SUNOS # Support to run Sun (m68k) executables 153 options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 154 options COMPAT_NOMID # allow nonvalid machine id executables 155 #options COMPAT_LINUX # Support to run Linux/m68k executables 156 157 options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 158 options COMPAT_AOUT_M68K # actually make some system calls work. 159 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 160 161 # 162 # Support for System V IPC facilities. 163 # 164 options SYSVSHM # System V-like shared memory 165 options SYSVMSG # System V-like messages 166 options SYSVSEM # System V-like semaphores 167 #options SEMMNI=10 # number of semaphore identifiers 168 #options SEMMNS=60 # number of semaphores in system 169 #options SEMUME=10 # max number of undo entries per process 170 #options SEMMNU=30 # number of undo structures in system 171 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 172 173 # 174 # Support for various kernel options 175 # 176 177 options KTRACE # system call tracing support 178 options SYSTRACE # system call vetting via systrace(1) 179 options LKM # Loadable kernel modules 180 #options INSECURE # disable kernel security levels 181 options SCSIVERBOSE # human readable SCSI error messages 182 options USERCONF # userconf(4) support 183 options NTP # NTP phase/frequency locked loop 184 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 185 186 # Enable experimental buffer queue strategy for better responsiveness under 187 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 188 #options BUFQ_READPRIO 189 #options BUFQ_PRIOCSCAN 190 191 # 192 # Misc. debugging options 193 # 194 options DDB # Kernel debugger 195 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 196 options DIAGNOSTIC # Extra kernel sanity checks 197 #options DEBUG # Enable misc. kernel debugging code 198 #options SYSCALL_DEBUG # debug all syscalls. 199 #options SCSIDEBUG # Add SCSI debugging statements 200 #options PANICBUTTON # Forced crash via keypress (?) 201 202 # 203 # Amiga specific options 204 # 205 #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 206 # first bank of RAM. (default: unlimited) 207 #options NKPTADD=4 # set this for 4 additional KPT pages 208 #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 209 # per 16 MB (1<<24 bytes) of RAM 210 # uncomment and decrease this, or uncomment and 211 # increase NKPTADD if you get "out of PT pages" 212 # panics. 213 214 # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 215 # before the 10 secondinterval ends, or that KBDRESET does work at all. 216 #options KBDRESET # sync on Ctrl-Amiga-Amiga 217 218 # These options improve performance with the built-in serial port 219 # on slower Amigas. Try the larger buffers first then lev6_defer. 220 #options SERIBUF_SIZE=4096 221 #options SEROBUF_SIZE=32 222 #options LEV6_DEFER # defers l6 to l4 (below serial l5) 223 224 #options DEVRELOAD # implement /dev/reload 225 # # currently only works for a.out kernels 226 227 options RETINACONSOLE # enable code to allow retina to be console 228 options ULOWELLCONSOLE # enable code to allow a2410 to be console 229 options CL5426CONSOLE # Cirrus console 230 options CV64CONSOLE # CyberVision console 231 options TSENGCONSOLE # Tseng console 232 options CV3DCONSOLE # CyberVision 64/3D console 233 234 options GRF_ECS # Enhanced Chip Set 235 options GRF_NTSC # NTSC 236 options GRF_PAL # PAL 237 options GRF_A2024 # Support for the A2024 238 options GRF_AGA # AGA Chip Set 239 options GRF_AGA_VGA # AGA VGAONLY timing 240 options GRF_SUPER72 # AGA Super-72 241 #options KFONT_8X11 # 8x11 font 242 243 # select a font for the console according to the character set and keymap 244 # you want to use 245 options KFONT_CONS_ISO8859_1 246 #options KFONT_CONS_ISO8859_2 247 248 # This is how you would tell the kernel the A2410 oscillator frequencies: 249 # The used frequencies are the defaults, and do not need option setting 250 #options ULOWELL_OSC1=36000000 251 #options ULOWELL_OSC2=66667000 252 253 # This is how you specify the blitting speed, higher values may speed up blits 254 # a littel bit. If you raise this value too much some trash may appear. 255 # the commented version is the default. 256 #options RH_MEMCLK=61000000 257 # this option enables the 64 bit sprite which does not work 258 # for quite a few people. E.g. The cursor sprite will turn to a block 259 # when moved to the top of the screen in X. 260 #options RH_64BIT_SPRITE 261 # enables fast scroll code appears to now work on 040 systems. 262 #options RETINA_SPEED_HACK 263 # enables the Hardwarecursor which does not work on some systems. 264 #options RH_HARDWARECURSOR 265 266 # wscons aware interface to amiga custom chips. 267 # If you enable it enable also wskbd. 268 # 269 amidisplaycc0 at mainbus0 # wscons interface to custom chips 270 wsdisplay0 at amidisplaycc0 console ? 271 options WSEMUL_VT100 272 options FONT_VT220L8x10 273 options FONT_VT220ISO8x16 274 275 276 msc0 at zbus0 # A2232 MSC multiport serial. 277 mfc0 at zbus0 # MultiFaceCard I/O board 278 mfcs0 at mfc0 unit 0 # MFC serial 279 mfcs1 at mfc0 unit 1 # MFC serial 280 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 281 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 282 #mfcs2 at mfc1 unit 0 283 #mfcs3 at mfc1 unit 1 284 #mfcp1 at mfc1 unit 0 285 286 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 287 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 288 com* at hyper? port ? # Hypercom3/4 serial ports 289 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 290 291 #options IOBZCLOCK=22118400 # default, uncomment the next line 292 #options IOBZCLOCK=24000000 # if needed. 293 294 iobl* at zbus? # zbus IOBlix 295 com* at iobl? port ? # IOBlix serial ports 296 lpt* at iobl? port ? # IOBlix parallel ports 297 298 299 # 300 # Keyboard device. Optionally can attach a wskbd. 301 # wskbd works together with a wsdisplay so enable them both if you will. 302 # Don't enable wskbd if you use ite. 303 # 304 # XXX in std.amiga: kbd0 at mainbus0 305 wskbd0 at kbd0 console ? 306 307 308 # 309 # Amiga Mainboard devices (sans graphics and keyboard) 310 # 311 312 ser0 at mainbus0 # Amiga onboard serial 313 par0 at mainbus0 # Amiga onboard parallel 314 ms* at mainbus0 # Amiga mice 315 fdc0 at mainbus0 # Amiga FDC 316 fd* at fdc0 unit ? # floppy disks on the later 317 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 318 a2kbbc0 at mainbus0 # A2000 battery backed clock 319 aucc* at mainbus0 # Amiga CC audio 320 audio* at aucc? 321 322 wsmouse* at ms? 323 324 # 325 # DraCo Mainboard devices (sans keyboard) 326 # 327 328 drbbc0 at mainbus0 # DraCo battery backed clock 329 drsupio0 at mainbus0 # DraCo superio chip 330 com* at drsupio? port ? # DraCo serial 331 lpt0 at drsupio? port ? # DraCo parallel 332 333 # 334 # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 335 # 336 337 338 repulse* at zbus0 # ALiENDESiGN Repulse 339 audio* at repulse? 340 341 toccata* at zbus0 # MacroSystem GmbH Toccata 342 audio* at toccata? 343 344 # Ethernet cards: 345 le* at zbus0 # A2065, Ameristar, Ariadne 346 ne* at zbus0 # AriadneII, X-surf 347 ed* at zbus0 # Hydra, ASDG LanRover 348 es* at zbus0 # CEI A4066 EthernetPLUS 349 qn* at zbus0 # Quicknet 350 351 # Arcnet 352 bah* at zbus0 # C=/Ameristar A2060 / 560 353 354 # Greater Valley Product Bus 355 gvpbus* at zbus0 356 357 # scsi stuff, all possible 358 gtsc0 at gvpbus? # GVP series II scsi 359 scsibus* at gtsc0 360 ahsc0 at mainbus0 # A3000 scsi 361 scsibus* at ahsc0 362 atzsc0 at zbus0 # A2091 scsi 363 scsibus* at atzsc0 364 wstsc0 at zbus0 # Wordsync II scsi 365 scsibus* at wstsc0 366 ivsc0 at zbus0 # IVS scsi 367 scsibus* at ivsc0 368 mlhsc0 at zbus0 # Hacker scsi 369 scsibus* at mlhsc0 370 otgsc0 at zbus0 # 12 gauge scsi 371 scsibus* at otgsc0 372 zssc0 at zbus0 # Zeus scsi 373 scsibus* at zssc0 374 mgnsc0 at zbus0 # Magnum scsi 375 scsibus* at mgnsc0 376 wesc0 at zbus0 # Warp Engine scsi 377 scsibus* at wesc0 378 afsc0 at zbus0 # A4091 scsi 379 scsibus* at afsc0 380 aftsc0 at mainbus0 # A4000T scsi 381 scsibus* at aftsc0 382 flsc0 at zbus0 # FastlaneZ3 scsi 383 scsibus* at flsc0 384 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 385 scsibus* at bzsc0 386 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 387 scsibus* at bzivsc0 388 bztzsc0 at zbus0 # Blizzard 2060 scsi 389 scsibus* at bztzsc0 390 cbsc0 at zbus0 # CyberSCSI I 391 scsibus* at cbsc0 392 cbiisc0 at zbus0 # CyberSCSI II 393 scsibus* at cbiisc0 394 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 395 scsibus* at cbiiisc0 396 empsc0 at zbus0 # Emplant scsi 397 scsibus* at empsc0 398 399 wdc0 at mainbus0 # A4000 & A1200 IDE bus 400 atabus* at wdc? channel ? # ATA bus 401 wd* at atabus? drive ? # + drives 402 atapibus* at atabus? # ATAPI bus 403 cd* at atapibus? drive ? # ATAPI CD-ROM drives 404 sd* at atapibus? drive ? # ATAPI disk drives 405 406 pccard0 at mainbus0 407 pcmcia* at pccard0 408 com* at pcmcia? function ? # Modems and serial cards 409 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 410 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 411 wdc* at pcmcia? function ? 412 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 413 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 414 mbe* at pcmcia? function ? # MB8696x based Ethernet 415 ne* at pcmcia? function ? # NE2000-compatible Ethernet 416 sm* at pcmcia? function ? # Megahertz Ethernet 417 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 418 com* at mhzc? 419 sm* at mhzc? 420 421 422 drsc0 at mainbus0 # DraCo scsi 423 scsibus* at drsc0 424 425 426 # each hard drive from low target to high 427 # will configure to the next available sd unit number 428 sd* at scsibus? target ? lun ? # scsi disks 429 st* at scsibus? target ? lun ? # scsi tapes 430 cd* at scsibus? target ? lun ? # scsi cds 431 ch* at scsibus? target ? lun ? # scsi autochangers 432 ss* at scsibus? target ? lun ? # scsi scanner 433 uk* at scsibus? target ? lun ? # scsi unknown 434 435 pseudo-device loop # loopback network interface 436 pseudo-device sl 1 # SLIP network interfaces 437 pseudo-device ppp 1 # PPP network interfaces 438 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 439 pseudo-device tun 1 # network tunnel line discipline 440 pseudo-device tap # virtual Ethernet 441 #pseudo-device gre 2 # generic L3 over IP tunnel 442 pseudo-device bpfilter 16 # Berkeley packet filter 443 pseudo-device ipfilter # IP Filter package 444 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 445 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 446 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 447 pseudo-device vlan # IEEE 802.1q encapsulation 448 pseudo-device bridge # simple inter-network bridging 449 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 450 #pseudo-device pf # PF packet filter 451 #pseudo-device pflog # PF log if 452 #pseudo-device fss 4 # file system snapshot device 453 454 pseudo-device view 4 # views (needed for grfcc) 455 pseudo-device pty # pseudo-terminals 456 pseudo-device clockctl # user control of clock subsystem 457 458 pseudo-device wsfont # wsfont(4) dynamic font loading support 459 pseudo-device wsmux # mouse & keyboard multiplexor 460 461 pseudo-device vnd 4 # vnode pseudo-disks 462 pseudo-device ccd 4 # concatenated disk devices 463 #pseudo-device cgd 4 # cryptographic disk devices 464 pseudo-device raid 8 # RAIDframe disk driver 465 options RAID_AUTOCONFIG # auto-configuration of RAID components 466 # Options to enable various other RAIDframe RAID types. 467 # options RF_INCLUDE_EVENODD=1 468 # options RF_INCLUDE_RAID5_RS=1 469 # options RF_INCLUDE_PARITYLOGGING=1 470 # options RF_INCLUDE_CHAINDECLUSTER=1 471 # options RF_INCLUDE_INTERDECLUSTER=1 472 # options RF_INCLUDE_PARITY_DECLUSTERING=1 473 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 474 475 pseudo-device rnd # /dev/random and in-kernel generator 476 #options RND_COM # use "com" randomness as well (BROKEN) 477 478 pseudo-device ksyms # /dev/ksyms (kernel symbols) 479 pseudo-device nsmb # experimental - SMB requester 480 481 config netbsd root on ? type ? 482
Indexes created Sat Oct 25 16:10:12 GMT 2025