WSCONS revision 1.5
1# $NetBSD: WSCONS,v 1.5 2002/05/30 19:45:49 thorpej Exp $ 2# 3# This file was automatically created. Changes will be 4# lost when running make in this directory. 5# 6# Created from: #NetBSD: GENERIC,v 1.180 2002/05/30 19:45:15 thorpej Exp $ 7 8#GENERIC machine description file 9 10#This machine description file is used to generate the default NetBSD 11#kernel. The generic kernel does not include all options, subsystems 12#and device drivers, but should be useful for most applications. 13 14#The machine description file can be customised for your specific 15#machine to reduce the kernel size and improve its performance. 16 17#For further information on compiling NetBSD kernels, see the config(8) 18#man page. 19 20#For further information on hardware support for this architecture, see 21#the intro(4) man page. For further information about kernel options 22#for this architecture, see the options(4) man page. For an explanation 23#of each device driver in this file see the section 4 man page for the 24#device. 25include "arch/amiga/conf/std.amiga" 26 27options INCLUDE_CONFIG_FILE # embed config file in kernel binary 28 29#ident "GENERIC-$Revision: 1.5 $" 30 31maxusers 8 32options RTC_OFFSET=0 33 34#mainboards to support (in addition to Amiga) 35 36options DRACO 37 38options BB060STUPIDROM # You need this, if you have a non-DraCo 39 #MC68060 with an OS ROM up to (at least) 40 #V40 (OS3.1) and want to boot with the 41 #bootblock. 42 #You do not need this if you have a DraCo, 43 #have no 68060 or NEVER use the bootblock 44options P5PPC68KBOARD # Phase5 PPC/68K board support 45 46#processors this kernel should support 47 48options M68060 # support for 060 49options M060SP # MC68060 software support (Required for 060) 50 51options M68040 # support for 040 52options FPSP # MC68040 floating point support 53options M68030 # support for 030 54options M68020 # support for 020/851 55options FPU_EMULATE # FPU emulation 56 57#Networking options 58 59options INET # IP networking support (Required) 60options INET6 # IPV6 61#options IPSEC # IP security 62#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 63#options IPSEC_DEBUG # debug for IP security 64#options GATEWAY # Packet forwarding 65#options DIRECTED_BROADCAST # Broadcast across subnets 66 67#options MROUTING # Multicast routing 68options NS # XNS 69#options NSIP # XNS tunneling over IP 70options ISO,TPIP # OSI 71#options EON # OSI tunneling over IP 72options CCITT,LLC,HDLC # X.25 73options NETATALK # AppleTalk networking protocols 74#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 75 76options PPP_BSDCOMP # BSD-Compress compression support for PPP 77options PPP_DEFLATE # Deflate compression support for PPP 78options PPP_FILTER # Active filter support for PPP (requires bpf) 79options PFIL_HOOKS # pfil(9) packet filter hooks 80options IPFILTER_LOG # ipmon(8) log support 81 82file-system FFS # Berkeley fast file system 83file-system EXT2FS # second extended file system (linux) 84#file-system LFS # log-structured filesystem (experimental) 85 86file-system MFS # Memory based filesystem 87 88file-system NFS # Network File System client side code 89file-system ADOSFS # AmigaDOS file system 90file-system CD9660 # ISO 9660 + Rock Ridge filesystem 91file-system MSDOSFS # MS-DOS filesystem 92 93file-system KERNFS # kernel data-structure filesystem 94 95file-system FDESC # user file descriptor filesystem 96file-system NULLFS # loopback filesystem 97file-system OVERLAY # overlay filesystem 98#file-system PORTAL # Portal filesystem 99file-system PROCFS # /proc filesystem 100file-system UMAPFS # NULLFS + uid and gid remapping 101file-system UNION # union filesystem 102 103#Filesystem options 104 105#options FFS_EI # FFS Endian Independant support 106 107options QUOTA # User and group quotas in FFS 108options SOFTDEP # FFS soft updates support. 109options NFSSERVER # Network File System server side code 110 111#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 112 #immutable) behave as system flags. 113 114#Compatibility options for various existing systems 115 116#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 117options COMPAT_43 # compatibility with 4.3BSD interfaces 118options COMPAT_09 # compatibility with NetBSD 0.9 119options COMPAT_10 # compatibility with NetBSD 1.0 120options COMPAT_12 # compatibility with NetBSD 1.2 121options COMPAT_13 # compatibility with NetBSD 1.3 122options COMPAT_14 # compatibility with NetBSD 1.4 123options COMPAT_SUNOS # Support to run Sun (m68k) executables 124options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 125options COMPAT_NOMID # allow nonvalid machine id executables 126#options COMPAT_LINUX # Support to run Linux/m68k executables 127 128options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 129options COMPAT_AOUT_M68K # actually make some system calls work. 130 131#Support for System V IPC facilities. 132 133options SYSVSHM # System V-like shared memory 134options SYSVMSG # System V-like messages 135options SYSVSEM # System V-like semaphores 136#options SEMMNI=10 # number of semaphore identifiers 137#options SEMMNS=60 # number of semaphores in system 138#options SEMUME=10 # max number of undo entries per process 139#options SEMMNU=30 # number of undo structures in system 140 141#Support for various kernel options 142 143options KTRACE # system call tracing support 144options LKM # Loadable kernel modules 145options UCONSOLE # anyone can redirect a virtual console 146 147#options INSECURE # disable kernel security levels 148options SCSIVERBOSE # human readable SCSI error messages 149#options USERCONF # userconf(4) support 150 151options NTP # NTP phase/frequency locked loop 152#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 153 154#Misc. debugging options 155 156options DDB # Kernel debugger 157#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 158options DIAGNOSTIC # Extra kernel sanity checks 159#options DEBUG # Enable misc. kernel debugging code 160#options SYSCALL_DEBUG # debug all syscalls. 161#options SCSIDEBUG # Add SCSI debugging statements 162#options PANICBUTTON # Forced crash via keypress (?) 163 164#Amiga specific options 165 166#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 167 #first bank of RAM. (default: unlimited) 168#options NKPTADD=4 # set this for 4 additional KPT pages 169#options NKPTADDSHIFT=24 # set this for 1 additional KPT page 170 #per 16 MB (1<<24 bytes) of RAM 171 #uncomment and decrease this, or uncomment and 172 #increase NKPTADD if you get "out of PT pages" 173 #panics. 174#ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 175#before the 10 secondinterval ends, or that KBDRESET does work at all. 176#options KBDRESET # sync on Ctrl-Amiga-Amiga 177 178#These options improve performance with the built-in serial port 179#on slower Amigas. Try the larger buffers first then lev6_defer. 180#options SERIBUF_SIZE=4096 181#options SEROBUF_SIZE=32 182#options LEV6_DEFER # defers l6 to l4 (below serial l5) 183 184options RETINACONSOLE # enable code to allow retina to be console 185 186options ULOWELLCONSOLE # enable code to allow a2410 to be console 187options CL5426CONSOLE # Cirrus console 188options CV64CONSOLE # CyberVision console 189options TSENGCONSOLE # Tseng console 190options CV3DCONSOLE # CyberVision 64/3D console 191 192options GRF_ECS # Enhanced Chip Set 193options GRF_NTSC # NTSC 194options GRF_PAL # PAL 195options GRF_A2024 # Support for the A2024 196options GRF_AGA # AGA Chip Set 197options GRF_AGA_VGA # AGA VGAONLY timing 198options GRF_SUPER72 # AGA Super-72 199 200#options KFONT_8X11 # 8x11 font 201 202#select a font for the console according to the character set and keymap 203#you want to use 204options KFONT_CONS_ISO8859_1 205#options KFONT_CONS_ISO8859_2 206 207#This is how you would tell the kernel the A2410 oscillator frequencies: 208#The used frequencies are the defaults, and do not need option setting 209#options ULOWELL_OSC1=36000000 210#options ULOWELL_OSC2=66667000 211 212#This is how you specify the blitting speed, higher values may speed up blits 213#a littel bit. If you raise this value too much some trash may appear. 214#the commented version is the default. 215#options RH_MEMCLK=61000000 216#this option enables the 64 bit sprite which does not work 217#for quite a few people. E.g. The cursor sprite will turn to a block 218#when moved to the top of the screen in X. 219#options RH_64BIT_SPRITE 220#enables fast scroll code appears to now work on 040 systems. 221#options RETINA_SPEED_HACK 222#enables the Hardwarecursor which does not work on some systems. 223#options RH_HARDWARECURSOR 224 225#wscons aware interface to amiga custom chips. 226#If you enable it enable also wskbd. 227 228amidisplaycc0 at mainbus0 # wscons interface to custom chips 229wsdisplay0 at amidisplaycc0 console ? 230options WSEMUL_VT100 231options FONT_BOLD8x16 232options FONT_VT220L8x10 233 234#grfcc0 at mainbus0 # custom chips 235#grfrt0 at zbus0 # retina II 236 237#grfrh0 at zbus0 # retina III 238 239#grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 240#grful0 at zbus0 # A2410 241#grfcv0 at zbus0 # CyberVision 64 242#grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 243#grfcv3d0 at zbus0 # CyberVision 64/3D 244 245#grf0 at grfcc0 246#grf1 at grfrt0 247 248#grf2 at grfrh0 249 250#grf3 at grfcl? 251#grf4 at grful0 252#grf5 at grfcv0 253#grf6 at grfet? 254#grf7 at grfcv3d0 255 256#ite0 at grf0 # terminal emulators for grfs 257#ite1 at grf1 # terminal emulators for grfs 258 259#ite2 at grf2 # terminal emulators for grfs 260 261#ite3 at grf3 # terminal emulators for grfs 262#ite4 at grf4 # terminal emulators for grfs 263#ite5 at grf5 # terminal emulators for grfs 264#ite6 at grf6 # terminal emulators for grfs 265#ite7 at grf7 # terminal emulators for grfs 266 267msc0 at zbus0 # A2232 MSC multiport serial. 268mfc0 at zbus0 # MultiFaceCard I/O board 269mfcs0 at mfc0 unit 0 # MFC serial 270mfcs1 at mfc0 unit 1 # MFC serial 271#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 272#mfc1 at zbus0 # MultiFaceCard 2nd I/O board 273#mfcs2 at mfc1 unit 0 274#mfcs3 at mfc1 unit 1 275#mfcp1 at mfc1 unit 0 276 277hyper* at zbus? # zbus HyperCom3/3+/4/4+ 278#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 279com* at hyper? port ? # Hypercom3/4 serial ports 280lpt* at hyper? port ? # Hypercom3+/4+ parallel port 281 282#options IOBZCLOCK=22118400 # default, uncomment the next line 283#options IOBZCLOCK=24000000 # if needed. 284 285iobl* at zbus? # zbus IOBlix 286com* at iobl? port ? # IOBlix serial ports 287lpt* at iobl? port ? # IOBlix parallel ports 288 289#Keyboard device. Optionally can attach a wskbd. 290#wskbd works together with a wsdisplay so enable them both if you will. 291#Don't enable wskbd if you use ite. 292# 293#XXX in std.amiga: kbd0 at mainbus0 294wskbd0 at kbd0 console ? 295 296#Amiga Mainboard devices (sans graphics and keyboard) 297 298ser0 at mainbus0 # Amiga onboard serial 299par0 at mainbus0 # Amiga onboard parallel 300ms* at mainbus0 # Amiga mice 301fdc0 at mainbus0 # Amiga FDC 302fd* at fdc0 unit ? # floppy disks on the later 303a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 304a2kbbc0 at mainbus0 # A2000 battery backed clock 305 306aucc* at mainbus0 # Amiga CC audio 307audio* at aucc? 308 309#DraCo Mainboard devices (sans keyboard) 310 311drbbc0 at mainbus0 # DraCo battery backed clock 312drsupio0 at mainbus0 # DraCo superio chip 313com* at drsupio? port ? # DraCo serial 314lpt0 at drsupio? port ? # DraCo parallel 315 316#Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 317 318repulse* at zbus0 # ALiENDESiGN Repulse 319audio* at repulse? 320 321toccata* at zbus0 # MacroSystem GmbH Toccata 322audio* at toccata? 323 324#Ethernet cards: 325le* at zbus0 # A2065, Ameristar, Ariadne 326ne* at zbus0 # AriadneII, X-surf 327ed* at zbus0 # Hydra, ASDG LanRover 328es* at zbus0 # CEI A4066 EthernetPLUS 329qn* at zbus0 # Quicknet 330 331bah* at zbus0 # C=/Ameristar A2060 / 560 332 333#Greater Valley Product Bus 334gvpbus* at zbus0 335 336#scsi stuff, all possible 337gtsc0 at gvpbus? # GVP series II scsi 338scsibus* at gtsc0 339ahsc0 at mainbus0 # A3000 scsi 340scsibus* at ahsc0 341atzsc0 at zbus0 # A2091 scsi 342scsibus* at atzsc0 343wstsc0 at zbus0 # Wordsync II scsi 344scsibus* at wstsc0 345ivsc0 at zbus0 # IVS scsi 346scsibus* at ivsc0 347mlhsc0 at zbus0 # Hacker scsi 348scsibus* at mlhsc0 349otgsc0 at zbus0 # 12 gauge scsi 350scsibus* at otgsc0 351zssc0 at zbus0 # Zeus scsi 352scsibus* at zssc0 353mgnsc0 at zbus0 # Magnum scsi 354scsibus* at mgnsc0 355wesc0 at zbus0 # Warp Engine scsi 356scsibus* at wesc0 357afsc0 at zbus0 # A4091 scsi 358scsibus* at afsc0 359aftsc0 at mainbus0 # A4000T scsi 360scsibus* at aftsc0 361flsc0 at zbus0 # FastlaneZ3 scsi 362scsibus* at flsc0 363bzsc0 at zbus0 # Blizzard 1230 I,II scsi 364scsibus* at bzsc0 365bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 366scsibus* at bzivsc0 367bztzsc0 at zbus0 # Blizzard 2060 scsi 368scsibus* at bztzsc0 369cbsc0 at zbus0 # CyberSCSI I 370scsibus* at cbsc0 371cbiisc0 at zbus0 # CyberSCSI II 372scsibus* at cbiisc0 373cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 374scsibus* at cbiiisc0 375empsc0 at zbus0 # Emplant scsi 376scsibus* at empsc0 377#idesc0 at mainbus0 # A4000 & A1200 IDE 378#scsibus* at idesc0 379 380#<<< comment out the wdc/atapibus entries below if the idesc lines above >>> 381#<<< are uncommented >>> 382wdc0 at mainbus0 # A4000 & A1200 IDE bus 383wd* at wdc? drive ? # + drives 384atapibus* at wdc? channel ? # ATAPI bus 385cd* at atapibus? drive ? # ATAPI CD-ROM drives 386sd* at atapibus? drive ? # ATAPI disk drives 387 388pccard0 at mainbus0 389pcmcia* at pccard0 390com* at pcmcia? function ? # Modems and serial cards 391pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 392aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 393wdc* at pcmcia? function ? 394awi* at pcmcia? function ? # BayStack 650 (802.11FH) 395ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 396mbe* at pcmcia? function ? # MB8696x based Ethernet 397ne* at pcmcia? function ? # NE2000-compatible Ethernet 398sm* at pcmcia? function ? # Megahertz Ethernet 399mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 400com* at mhzc? 401sm* at mhzc? 402 403drsc0 at mainbus0 # DraCo scsi 404scsibus* at drsc0 405 406#each hard drive from low target to high 407#will configure to the next available sd unit number 408sd* at scsibus? target ? lun ? # scsi disks 409st* at scsibus? target ? lun ? # scsi tapes 410cd* at scsibus? target ? lun ? # scsi cds 411ch* at scsibus? target ? lun ? # scsi autochangers 412 413ss* at scsibus? target ? lun ? # scsi scanner 414uk* at scsibus? target ? lun ? # scsi unknown 415 416pseudo-device loop # loopback network interface 417pseudo-device sl 1 # SLIP network interfaces 418pseudo-device ppp 1 # PPP network interfaces 419pseudo-device pppoe # PPP over Ethernet (RFC 2516) 420pseudo-device tun 1 # network tunnel line discipline 421#pseudo-device gre 2 # generic L3 over IP tunnel 422pseudo-device bpfilter 16 # Berkeley packet filter 423pseudo-device ipfilter # IP Filter package 424pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 425#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 426#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 427pseudo-device vlan # IEEE 802.1q encapsulation 428pseudo-device bridge # simple inter-network bridging 429 430pseudo-device view 4 # views (needed for grfcc) 431pseudo-device pty # pseudo-terminals 432 433pseudo-device vnd 4 # vnode pseudo-disks 434pseudo-device ccd 4 # concatenated disk devices 435pseudo-device raid 8 # RAIDframe disk driver 436options RAID_AUTOCONFIG # auto-configuration of RAID components 437#Options to enable various other RAIDframe RAID types. 438#options RF_INCLUDE_EVENODD=1 439#options RF_INCLUDE_RAID5_RS=1 440#options RF_INCLUDE_PARITYLOGGING=1 441#options RF_INCLUDE_CHAINDECLUSTER=1 442#options RF_INCLUDE_INTERDECLUSTER=1 443#options RF_INCLUDE_PARITY_DECLUSTERING=1 444#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 445 446pseudo-device rnd # /dev/random and in-kernel generator 447#options RND_COM # use "com" randomness as well (BROKEN) 448 449config netbsd root on ? type ? 450