WSCONS revision 1.9
1# $NetBSD: WSCONS,v 1.9 2002/09/18 02:16:02 lukem Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.3 2002/09/18 02:15:09 lukem Exp $
7#
8# GENERIC machine description file
9#
10# This machine description file is used to generate the default NetBSD
11# kernel.  The generic kernel does not include all options, subsystems
12# and device drivers, but should be useful for most applications.
13#
14# The machine description file can be customised for your specific
15# machine to reduce the kernel size and improve its performance.
16#
17# For further information on compiling NetBSD kernels, see the config(8)
18# man page.
19#
20# For further information on hardware support for this architecture, see
21# the intro(4) man page.  For further information about kernel options
22# for this architecture, see the options(4) man page.  For an explanation
23# of each device driver in this file see the section 4 man page for the
24# device.
25
26
27include "arch/amiga/conf/std.amiga"
28
29options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
30
31#ident 		"GENERIC-$Revision: 1.9 $"
32
33
34maxusers	8
35options 	RTC_OFFSET=0
36
37#
38# mainboards to support (in addition to Amiga)
39#
40options 	DRACO
41options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
42				# MC68060 with an OS ROM up to (at least)
43				# V40 (OS3.1) and want to boot with the
44				# bootblock.
45				# You do not need this if you have a DraCo,
46				# have no 68060 or NEVER use the bootblock
47options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
48#
49# processors this kernel should support
50#
51options 	M68060		# support for 060
52options 	M060SP		# MC68060 software support (Required for 060)
53options 	M68040		# support for 040
54options 	FPSP		# MC68040 floating point support
55options 	M68030		# support for 030
56options 	M68020		# support for 020/851
57options 	FPU_EMULATE	# FPU emulation
58
59#
60# Networking options
61#
62options 	INET		# IP networking support (Required)
63options 	INET6		# IPV6
64#options 	IPSEC		# IP security
65#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
66#options 	IPSEC_DEBUG	# debug for IP security
67#options 	GATEWAY		# Packet forwarding
68#options 	DIRECTED_BROADCAST	# Broadcast across subnets
69
70#options 	MROUTING	# Multicast routing
71options 	NS		# XNS
72#options 	NSIP		# XNS tunneling over IP
73options 	ISO,TPIP	# OSI
74#options 	EON		# OSI tunneling over IP
75options 	CCITT,LLC,HDLC	# X.25
76options 	NETATALK	# AppleTalk networking protocols
77#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
78
79options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
80options 	PPP_DEFLATE	# Deflate compression support for PPP
81options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
82options 	PFIL_HOOKS	# pfil(9) packet filter hooks
83options 	IPFILTER_LOG	# ipmon(8) log support
84
85# Filesystems
86file-system 	FFS		# Berkeley fast file system
87file-system 	EXT2FS		# second extended file system (linux)
88#file-system 	LFS		# log-structured filesystem (experimental)
89
90file-system 	MFS		# Memory based filesystem
91
92file-system 	NFS		# Network File System client side code
93file-system 	ADOSFS		# AmigaDOS file system
94file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
95file-system 	MSDOSFS		# MS-DOS filesystem
96
97file-system 	KERNFS		# kernel data-structure filesystem
98
99file-system 	FDESC		# user file descriptor filesystem
100file-system 	NULLFS		# loopback filesystem
101file-system 	OVERLAY		# overlay filesystem
102#file-system 	PORTAL		# Portal filesystem
103file-system 	PROCFS		# /proc filesystem
104file-system 	UMAPFS		# NULLFS + uid and gid remapping
105file-system 	UNION		# union filesystem
106
107# Filesystem options
108
109#options 	FFS_EI		# FFS Endian Independant support
110
111options 	QUOTA		# User and group quotas in FFS
112options 	SOFTDEP		# FFS soft updates support.
113options 	NFSSERVER	# Network File System server side code
114
115#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
116				# immutable) behave as system flags.
117
118#
119# Compatibility options for various existing systems
120#
121
122#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
123options 	COMPAT_43	# compatibility with 4.3BSD interfaces
124options 	COMPAT_09	# compatibility with NetBSD 0.9
125options 	COMPAT_10	# compatibility with NetBSD 1.0
126options 	COMPAT_12	# compatibility with NetBSD 1.2
127options 	COMPAT_13	# compatibility with NetBSD 1.3
128options 	COMPAT_14	# compatibility with NetBSD 1.4
129options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
130options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
131options 	COMPAT_NOMID	# allow nonvalid machine id executables
132#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
133
134options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
135options 	COMPAT_AOUT_M68K # actually make some system calls work.
136
137#
138# Support for System V IPC facilities.
139#
140options 	SYSVSHM		# System V-like shared memory
141options 	SYSVMSG		# System V-like messages
142options 	SYSVSEM		# System V-like semaphores
143#options 	SEMMNI=10	# number of semaphore identifiers
144#options 	SEMMNS=60	# number of semaphores in system
145#options 	SEMUME=10	# max number of undo entries per process
146#options 	SEMMNU=30	# number of undo structures in system
147
148#
149# Support for various kernel options
150#
151
152options 	KTRACE		# system call tracing support
153options 	LKM		# Loadable kernel modules
154options 	UCONSOLE	# anyone can redirect a virtual console
155#options 	INSECURE	# disable kernel security levels
156options 	SCSIVERBOSE	# human readable SCSI error messages
157options 	USERCONF	# userconf(4) support
158options 	NTP		# NTP phase/frequency locked loop
159#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
160
161#
162# Misc. debugging options
163#
164options 	DDB		# Kernel debugger
165#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
166options 	DIAGNOSTIC	# Extra kernel sanity checks
167#options 	DEBUG		# Enable misc. kernel debugging code
168#options 	SYSCALL_DEBUG	# debug all syscalls.
169#options 	SCSIDEBUG	# Add SCSI debugging statements
170#options 	PANICBUTTON	# Forced crash via keypress (?)
171
172#
173# Amiga specific options
174#
175#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
176				# first bank of RAM. (default: unlimited)
177#options 	NKPTADD=4	# set this for 4 additional KPT pages
178#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
179				# per 16 MB (1<<24 bytes) of RAM
180				# uncomment and decrease this, or uncomment and
181				# increase NKPTADD if you get "out of PT pages"
182				# panics.
183
184# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
185# before the 10 secondinterval ends, or that KBDRESET does work at all.
186#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
187
188# These options improve performance with the built-in serial port
189# on slower Amigas.  Try the larger buffers first then lev6_defer.
190#options 	SERIBUF_SIZE=4096
191#options 	SEROBUF_SIZE=32
192#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
193
194options 	RETINACONSOLE	# enable code to allow retina to be console
195options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
196options 	CL5426CONSOLE	# Cirrus console
197options 	CV64CONSOLE	# CyberVision console
198options 	TSENGCONSOLE	# Tseng console
199options 	CV3DCONSOLE	# CyberVision 64/3D console
200
201options 	GRF_ECS		# Enhanced Chip Set
202options 	GRF_NTSC	# NTSC
203options 	GRF_PAL		# PAL
204options 	GRF_A2024	# Support for the A2024
205options 	GRF_AGA		# AGA Chip Set
206options 	GRF_AGA_VGA	# AGA VGAONLY timing
207options 	GRF_SUPER72	# AGA Super-72
208#options 	KFONT_8X11	# 8x11 font
209
210# select a font for the console according to the character set and keymap
211# you want to use
212options        KFONT_CONS_ISO8859_1
213#options         KFONT_CONS_ISO8859_2
214
215# This is how you would tell the kernel the A2410 oscillator frequencies:
216# The used frequencies are the defaults, and do not need option setting
217#options 	ULOWELL_OSC1=36000000
218#options 	ULOWELL_OSC2=66667000
219
220# This is how you specify the blitting speed, higher values may speed up blits
221# a littel bit.  If you raise this value too much some trash may appear.
222# the commented version is the default.
223#options 	RH_MEMCLK=61000000
224# this option enables the 64 bit sprite which does not work
225# for quite a few people.  E.g. The cursor sprite will turn to a block
226# when moved to the top of the screen in X.
227#options 	RH_64BIT_SPRITE
228# enables fast scroll code appears to now work on 040 systems.
229#options 	RETINA_SPEED_HACK
230# enables the Hardwarecursor which does not work on some systems.
231#options 	RH_HARDWARECURSOR
232
233# wscons aware interface to amiga custom chips.
234# If you enable it enable also wskbd.
235#
236amidisplaycc0	at mainbus0		# wscons interface to custom chips
237wsdisplay0	at amidisplaycc0 console ?
238options 	WSEMUL_VT100
239options 	FONT_BOLD8x16
240options 	FONT_VT220L8x10
241
242
243msc0		at zbus0		# A2232 MSC multiport serial.
244mfc0		at zbus0		# MultiFaceCard I/O board
245mfcs0		at mfc0 unit 0		# MFC serial
246mfcs1		at mfc0 unit 1		# MFC serial
247#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
248#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
249#mfcs2		at mfc1 unit 0
250#mfcs3		at mfc1 unit 1
251#mfcp1		at mfc1 unit 0
252
253hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
254#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
255com*		at hyper? port ?	# Hypercom3/4 serial ports
256lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
257
258#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
259#options 	IOBZCLOCK=24000000	# if needed.
260
261iobl*		at zbus?		# zbus IOBlix
262com*		at iobl? port ?		# IOBlix serial ports
263lpt*		at iobl? port ?		# IOBlix parallel ports
264
265
266#
267# Keyboard device. Optionally can attach a wskbd.
268# wskbd works together with a wsdisplay so enable them both if you will.
269# Don't enable wskbd if you use ite.
270#
271# XXX in std.amiga: kbd0 at mainbus0
272wskbd0		at kbd0 console ?
273
274
275#
276# Amiga Mainboard devices (sans graphics and keyboard)
277#
278
279ser0		at mainbus0		# Amiga onboard serial
280par0		at mainbus0		# Amiga onboard parallel
281ms*		at mainbus0		# Amiga mice
282fdc0		at mainbus0		# Amiga FDC
283fd*		at fdc0 unit ?		# floppy disks on the later
284a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
285a2kbbc0 	at mainbus0		# A2000 battery backed clock
286aucc*		at mainbus0		# Amiga CC audio
287audio*		at aucc?
288
289#
290# DraCo Mainboard devices (sans keyboard)
291#
292
293drbbc0		at mainbus0		# DraCo battery backed clock
294drsupio0	at mainbus0		# DraCo superio chip
295com*		at drsupio? port ?	# DraCo serial
296lpt0		at drsupio? port ?	# DraCo parallel
297
298#
299# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
300#
301
302
303repulse*	at zbus0		# ALiENDESiGN Repulse
304audio*		at repulse?
305
306toccata*	at zbus0		# MacroSystem GmbH Toccata
307audio*		at toccata?
308
309# Ethernet cards:
310le*		at zbus0		# A2065, Ameristar, Ariadne
311ne*		at zbus0		# AriadneII, X-surf
312ed*		at zbus0		# Hydra, ASDG LanRover
313es*		at zbus0		# CEI A4066 EthernetPLUS
314qn*		at zbus0		# Quicknet
315
316# Arcnet
317bah*		at zbus0		# C=/Ameristar A2060 / 560
318
319# Greater Valley Product Bus
320gvpbus* 	at zbus0
321
322# scsi stuff, all possible
323gtsc0		at gvpbus?		# GVP series II scsi
324scsibus*	at gtsc0
325ahsc0		at mainbus0		# A3000 scsi
326scsibus*	at ahsc0
327atzsc0		at zbus0		# A2091 scsi
328scsibus*	at atzsc0
329wstsc0		at zbus0		# Wordsync II scsi
330scsibus*	at wstsc0
331ivsc0		at zbus0		# IVS scsi
332scsibus*	at ivsc0
333mlhsc0		at zbus0		# Hacker scsi
334scsibus*	at mlhsc0
335otgsc0		at zbus0		# 12 gauge scsi
336scsibus*	at otgsc0
337zssc0		at zbus0		# Zeus scsi
338scsibus*	at zssc0
339mgnsc0		at zbus0		# Magnum scsi
340scsibus*	at mgnsc0
341wesc0		at zbus0		# Warp Engine scsi
342scsibus*	at wesc0
343afsc0		at zbus0		# A4091 scsi
344scsibus*	at afsc0
345aftsc0		at mainbus0		# A4000T scsi
346scsibus*	at aftsc0
347flsc0		at zbus0		# FastlaneZ3 scsi
348scsibus*	at flsc0
349bzsc0		at zbus0		# Blizzard 1230 I,II scsi
350scsibus*	at bzsc0
351bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
352scsibus*	at bzivsc0
353bztzsc0 	at zbus0		# Blizzard 2060 scsi
354scsibus*	at bztzsc0
355cbsc0		at zbus0		# CyberSCSI I
356scsibus*	at cbsc0
357cbiisc0 	at zbus0		# CyberSCSI II
358scsibus*	at cbiisc0
359cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
360scsibus*	at cbiiisc0
361empsc0		at zbus0		# Emplant scsi
362scsibus*	at empsc0
363#idesc0		at mainbus0		# A4000 & A1200 IDE
364#scsibus*	at idesc0
365
366# <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
367# <<< are uncommented >>>
368wdc0		at mainbus0		# A4000 & A1200 IDE bus
369wd*		at wdc? drive ?		#  + drives
370atapibus*	at wdc? channel ?	# ATAPI bus
371cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
372sd*		at atapibus? drive ?	# ATAPI disk drives
373
374pccard0		at mainbus0
375pcmcia*		at pccard0
376com*		at pcmcia? function ?		# Modems and serial cards
377pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
378aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
379wdc*		at pcmcia? function ?
380awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
381ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
382mbe*		at pcmcia? function ?		# MB8696x based Ethernet
383ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
384sm*		at pcmcia? function ?		# Megahertz Ethernet
385mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
386com*		at mhzc?
387sm*		at mhzc?
388
389
390drsc0		at mainbus0		# DraCo scsi
391scsibus*	at drsc0
392
393
394# each hard drive from low target to high
395# will configure to the next available sd unit number
396sd*	at scsibus? target ? lun ?	# scsi disks
397st*	at scsibus? target ? lun ?	# scsi tapes
398cd*	at scsibus? target ? lun ?	# scsi cds
399ch*	at scsibus? target ? lun ?	# scsi autochangers
400ss*	at scsibus? target ? lun ?	# scsi scanner
401uk*	at scsibus? target ? lun ?	# scsi unknown
402
403pseudo-device	loop			# loopback network interface
404pseudo-device	sl		1	# SLIP network interfaces
405pseudo-device	ppp		1	# PPP network interfaces
406pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
407pseudo-device	tun		1	# network tunnel line discipline
408#pseudo-device	gre		2	# generic L3 over IP tunnel
409pseudo-device	bpfilter	16	# Berkeley packet filter
410pseudo-device	ipfilter		# IP Filter package
411pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
412#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
413#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
414pseudo-device	vlan			# IEEE 802.1q encapsulation
415pseudo-device	bridge			# simple inter-network bridging
416
417pseudo-device	view		4	# views (needed for grfcc)
418pseudo-device	pty			# pseudo-terminals
419pseudo-device	clockctl		# user control of clock subsystem
420
421pseudo-device	vnd		4	# vnode pseudo-disks
422pseudo-device	ccd		4	# concatenated disk devices
423pseudo-device	raid		8	# RAIDframe disk driver
424options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
425# Options to enable various other RAIDframe RAID types.
426# options 	RF_INCLUDE_EVENODD=1
427# options 	RF_INCLUDE_RAID5_RS=1
428# options 	RF_INCLUDE_PARITYLOGGING=1
429# options 	RF_INCLUDE_CHAINDECLUSTER=1
430# options 	RF_INCLUDE_INTERDECLUSTER=1
431# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
432# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
433
434pseudo-device	rnd			# /dev/random and in-kernel generator
435#options 	RND_COM			# use "com" randomness as well (BROKEN)
436
437config	netbsd root on ? type ?
438