xref: /src/sys/arch/amiga/dev/clock.c

/*	$NetBSD: clock.c,v 1.27 1997/07/06 22:27:19 is Exp $	*/

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1982, 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: Utah $Hdr: clock.c 1.18 91/01/21$
 *
 *	@(#)clock.c	7.6 (Berkeley) 5/7/91
 */

#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <machine/psl.h>
#include <machine/cpu.h>
#include <amiga/amiga/device.h>
#include <amiga/amiga/custom.h>
#include <amiga/amiga/cia.h>
#ifdef DRACO
#include <dev/ic/ds.h>
#include <amiga/amiga/drcustom.h>
#endif
#include <amiga/dev/rtc.h>
#include <amiga/dev/zbusvar.h>

#include <dev/clock_subr.h>

#if defined(PROF) && defined(PROFTIMER)
#include <sys/PROF.h>
#endif

/* the clocks run at NTSC: 715.909kHz or PAL: 709.379kHz.
   We're using a 100 Hz clock. */

#define CLK_INTERVAL amiga_clk_interval
int amiga_clk_interval;
int eclockfreq;
struct CIA *clockcia;

/*
 * Machine-dependent clock routines.
 *
 * Startrtclock restarts the real-time clock, which provides
 * hardclock interrupts to kern_clock.c.
 *
 * Inittodr initializes the time of day hardware which provides
 * date functions.
 *
 * Resettodr restores the time of day hardware after a time change.
 *
 * A note on the real-time clock:
 * We actually load the clock with CLK_INTERVAL-1 instead of CLK_INTERVAL.
 * This is because the counter decrements to zero after N+1 enabled clock
 * periods where N is the value loaded into the counter.
 */

int clockmatch __P((struct device *, struct cfdata *, void *));
void clockattach __P((struct device *, struct device *, void *));
void cpu_initclocks __P((void));
void calibrate_delay __P((struct device *));

struct cfattach clock_ca = {
	sizeof(struct device), clockmatch, clockattach
};

struct cfdriver clock_cd = {
	NULL, "clock", DV_DULL, NULL, 0 };

int
clockmatch(pdp, cfp, auxp)
	struct device *pdp;
	struct cfdata *cfp;
	void *auxp;
{
	if (matchname("clock", auxp))
		return(1);
	return(0);
}

/*
 * Start the real-time clock.
 */
void
clockattach(pdp, dp, auxp)
	struct device *pdp, *dp;
	void *auxp;
{
	char *clockchip;
	unsigned short interval;
#ifdef DRACO
	u_char dracorev;
#endif

	if (eclockfreq == 0)
		eclockfreq = 715909;	/* guess NTSC */

	CLK_INTERVAL = (eclockfreq / 100);

#ifdef DRACO
	dracorev = is_draco();
	if (dracorev >= 4) {
		CLK_INTERVAL = (eclockfreq / 700);
		clockchip = "QuickLogic";
	} else if (dracorev) {
		clockcia = (struct CIA *)CIAAbase;
		clockchip = "CIA A";
	} else
#endif
	{
		clockcia = (struct CIA *)CIABbase;
		clockchip = "CIA B";
	}

	if (dp)
		printf(": %s system hz %d hardware hz %d\n", clockchip, hz,
#ifdef DRACO
		dracorev >= 4 ? eclockfreq / 7 : eclockfreq);
#else
		eclockfreq);
#endif

#ifdef DRACO
	if (dracorev >= 4) {
		/*
		 * can't preload anything beforehand, timer is free_running;
		 * but need this for delay calibration.
		 */

		draco_ioct->io_timerlo = CLK_INTERVAL & 0xff;
		draco_ioct->io_timerhi = CLK_INTERVAL >> 8;

		calibrate_delay(dp);

		return;
	}
#endif
	/*
	 * stop timer A
	 */
	clockcia->cra = clockcia->cra & 0xc0;
	clockcia->icr = 1 << 0;		/* disable timer A interrupt */
	interval = clockcia->icr;		/* and make sure it's clear */

	/*
	 * load interval into registers.
         * the clocks run at NTSC: 715.909kHz or PAL: 709.379kHz
	 * supprort for PAL WHEN?!?! XXX
	 */
	interval = CLK_INTERVAL - 1;

	/*
	 * order of setting is important !
	 */
	clockcia->talo = interval & 0xff;
	clockcia->tahi = interval >> 8;
	/*
	 * start timer A in continuous mode
	 */
	clockcia->cra = (clockcia->cra & 0xc0) | 1;

	calibrate_delay(dp);
}

/*
 * Calibrate delay loop.
 * We use two iterations because we don't have enough bits to do a factor of
 * 8 with better than 1%.
 *
 * XXX Note that we MUST stay below 1 tick if using clkread(), even for
 * underestimated values of delaydivisor.
 *
 * XXX the "ns" below is only correct for a shift of 10 bits, and even then
 * off by 2.4%
 */

void calibrate_delay(dp)
	struct device *dp;
{
	unsigned long t1, t2;
	extern u_int32_t delaydivisor;
		/* XXX this should be defined elsewhere */

	if (dp)
		printf("Calibrating delay loop... ");

	do {
		t1 = clkread();
		delay(1024);
		t2 = clkread();
	} while (t2 <= t1);
	t2 -= t1;
	delaydivisor = (delaydivisor * t2 + 1023) >> 10;
#ifdef DIAGNOSTIC
	if (dp)
		printf("\ndiff %ld us, new divisor %u/1024 us\n", t2,
		    delaydivisor);
	do {
		t1 = clkread();
		delay(1024);
		t2 = clkread();
	} while (t2 <= t1);
	t2 -= t1;
	delaydivisor = (delaydivisor * t2 + 1023) >> 10;
	if (dp)
		printf("diff %ld us, new divisor %u/1024 us\n", t2,
		    delaydivisor);
#endif
	do {
		t1 = clkread();
		delay(1024);
		t2 = clkread();
	} while (t2 <= t1);
	t2 -= t1;
	delaydivisor = (delaydivisor * t2 + 1023) >> 10;
#ifdef DIAGNOSTIC
	if (dp)
		printf("diff %ld us, new divisor ", t2);
#endif
	if (dp)
		printf("%u/1024 us\n", delaydivisor);
}

void
cpu_initclocks()
{
#ifdef DRACO
	unsigned char dracorev;
	dracorev = is_draco();
	if (dracorev >= 4) {
		draco_ioct->io_timerlo = CLK_INTERVAL & 0xFF;
		draco_ioct->io_timerhi = CLK_INTERVAL >> 8;
		draco_ioct->io_timerrst = 0;	/* any value resets */
		draco_ioct->io_status2 |= DRSTAT2_TMRINTENA;

		return;
	}
#endif
	/*
	 * enable interrupts for timer A
	 */
	clockcia->icr = (1<<7) | (1<<0);

	/*
	 * start timer A in continuous shot mode
	 */
	clockcia->cra = (clockcia->cra & 0xc0) | 1;

	/*
	 * and globally enable interrupts for ciab
	 */
#ifdef DRACO
	if (dracorev)		/* we use cia a on DraCo */
		*draco_intena |= DRIRQ_INT2;
	else
#endif
		custom.intena = INTF_SETCLR | INTF_EXTER;

}

void
setstatclockrate(hz)
	int hz;
{
}

/*
 * Returns number of usec since last recorded clock "tick"
 * (i.e. clock interrupt).
 */
u_long
clkread()
{
	u_int interval;
	u_char hi, hi2, lo;

#ifdef DRACO
	if (is_draco() >= 4) {
		hi2 = draco_ioct->io_chiprev;	/* latch timer */
		hi = draco_ioct->io_timerhi;
		lo = draco_ioct->io_timerlo;
		interval = ((hi<<8) | lo);
		if (interval > CLK_INTERVAL)	/* timer underflow */
			interval = 65536 + CLK_INTERVAL - interval;
		else
			interval = CLK_INTERVAL - interval;

	} else
#endif
	{
		hi  = clockcia->tahi;
		lo  = clockcia->talo;
		hi2 = clockcia->tahi;
		if (hi != hi2) {
			lo = clockcia->talo;
			hi = hi2;
		}

		interval = (CLK_INTERVAL - 1) - ((hi<<8) | lo);

		/*
		 * should read ICR and if there's an int pending, adjust
		 * interval. However, since reading ICR clears the interrupt,
		 * we'd lose a hardclock int, and this is not tolerable.
		 */
	}

	return((interval * tick) / CLK_INTERVAL);
}

#if notyet

/* implement this later. I'd suggest using both timers in CIA-A, they're
   not yet used. */

#include "clock.h"
#if NCLOCK > 0
/*
 * /dev/clock: mappable high resolution timer.
 *
 * This code implements a 32-bit recycling counter (with a 4 usec period)
 * using timers 2 & 3 on the 6840 clock chip.  The counter can be mapped
 * RO into a user's address space to achieve low overhead (no system calls),
 * high-precision timing.
 *
 * Note that timer 3 is also used for the high precision profiling timer
 * (PROFTIMER code above).  Care should be taken when both uses are
 * configured as only a token effort is made to avoid conflicting use.
 */
#include <sys/proc.h>
#include <sys/resourcevar.h>
#include <sys/ioctl.h>
#include <sys/malloc.h>
#include <vm/vm.h>
#include <amiga/amiga/clockioctl.h>
#include <sys/specdev.h>
#include <sys/vnode.h>
#include <sys/mman.h>

int clockon = 0;		/* non-zero if high-res timer enabled */
#ifdef PROFTIMER
int  profprocs = 0;		/* # of procs using profiling timer */
#endif
#ifdef DEBUG
int clockdebug = 0;
#endif

/*ARGSUSED*/
clockopen(dev, flags)
	dev_t dev;
{
#ifdef PROFTIMER
#ifdef PROF
	/*
	 * Kernel profiling enabled, give up.
	 */
	if (profiling)
		return(EBUSY);
#endif
	/*
	 * If any user processes are profiling, give up.
	 */
	if (profprocs)
		return(EBUSY);
#endif
	if (!clockon) {
		startclock();
		clockon++;
	}
	return(0);
}

/*ARGSUSED*/
clockclose(dev, flags)
	dev_t dev;
{
	(void) clockunmmap(dev, (caddr_t)0, curproc);	/* XXX */
	stopclock();
	clockon = 0;
	return(0);
}

/*ARGSUSED*/
clockioctl(dev, cmd, data, flag, p)
	dev_t dev;
	u_long cmd;
	caddr_t data;
	struct proc *p;
{
	int error = 0;

	switch (cmd) {

	case CLOCKMAP:
		error = clockmmap(dev, (caddr_t *)data, p);
		break;

	case CLOCKUNMAP:
		error = clockunmmap(dev, *(caddr_t *)data, p);
		break;

	case CLOCKGETRES:
		*(int *)data = CLK_RESOLUTION;
		break;

	default:
		error = EINVAL;
		break;
	}
	return(error);
}

/*ARGSUSED*/
clockmap(dev, off, prot)
	dev_t dev;
{
	return((off + (INTIOBASE+CLKBASE+CLKSR-1)) >> PGSHIFT);
}

clockmmap(dev, addrp, p)
	dev_t dev;
	caddr_t *addrp;
	struct proc *p;
{
	int error;
	struct vnode vn;
	struct specinfo si;
	int flags;

	flags = MAP_FILE|MAP_SHARED;
	if (*addrp)
		flags |= MAP_FIXED;
	else
		*addrp = (caddr_t)0x1000000;	/* XXX */
	vn.v_type = VCHR;			/* XXX */
	vn.v_specinfo = &si;			/* XXX */
	vn.v_rdev = dev;			/* XXX */
	error = vm_mmap(&p->p_vmspace->vm_map, (vm_offset_t *)addrp,
			PAGE_SIZE, VM_PROT_ALL, flags, (caddr_t)&vn, 0);
	return(error);
}

clockunmmap(dev, addr, p)
	dev_t dev;
	caddr_t addr;
	struct proc *p;
{
	int rv;

	if (addr == 0)
		return(EINVAL);		/* XXX: how do we deal with this? */
	rv = vm_deallocate(p->p_vmspace->vm_map, (vm_offset_t)addr, PAGE_SIZE);
	return(rv == KERN_SUCCESS ? 0 : EINVAL);
}

startclock()
{
	register struct clkreg *clk = (struct clkreg *)clkstd[0];

	clk->clk_msb2 = -1; clk->clk_lsb2 = -1;
	clk->clk_msb3 = -1; clk->clk_lsb3 = -1;

	clk->clk_cr2 = CLK_CR3;
	clk->clk_cr3 = CLK_OENAB|CLK_8BIT;
	clk->clk_cr2 = CLK_CR1;
	clk->clk_cr1 = CLK_IENAB;
}

stopclock()
{
	register struct clkreg *clk = (struct clkreg *)clkstd[0];

	clk->clk_cr2 = CLK_CR3;
	clk->clk_cr3 = 0;
	clk->clk_cr2 = CLK_CR1;
	clk->clk_cr1 = CLK_IENAB;
}
#endif

#endif


#ifdef PROFTIMER
/*
 * This code allows the amiga kernel to use one of the extra timers on
 * the clock chip for profiling, instead of the regular system timer.
 * The advantage of this is that the profiling timer can be turned up to
 * a higher interrupt rate, giving finer resolution timing. The profclock
 * routine is called from the lev6intr in locore, and is a specialized
 * routine that calls addupc. The overhead then is far less than if
 * hardclock/softclock was called. Further, the context switch code in
 * locore has been changed to turn the profile clock on/off when switching
 * into/out of a process that is profiling (startprofclock/stopprofclock).
 * This reduces the impact of the profiling clock on other users, and might
 * possibly increase the accuracy of the profiling.
 */
int  profint   = PRF_INTERVAL;	/* Clock ticks between interrupts */
int  profscale = 0;		/* Scale factor from sys clock to prof clock */
char profon    = 0;		/* Is profiling clock on? */

/* profon values - do not change, locore.s assumes these values */
#define PRF_NONE	0x00
#define	PRF_USER	0x01
#define	PRF_KERNEL	0x80

initprofclock()
{
#if NCLOCK > 0
	struct proc *p = curproc;		/* XXX */

	/*
	 * If the high-res timer is running, force profiling off.
	 * Unfortunately, this gets reflected back to the user not as
	 * an error but as a lack of results.
	 */
	if (clockon) {
		p->p_stats->p_prof.pr_scale = 0;
		return;
	}
	/*
	 * Keep track of the number of user processes that are profiling
	 * by checking the scale value.
	 *
	 * XXX: this all assumes that the profiling code is well behaved;
	 * i.e. profil() is called once per process with pcscale non-zero
	 * to turn it on, and once with pcscale zero to turn it off.
	 * Also assumes you don't do any forks or execs.  Oh well, there
	 * is always adb...
	 */
	if (p->p_stats->p_prof.pr_scale)
		profprocs++;
	else
		profprocs--;
#endif
	/*
	 * The profile interrupt interval must be an even divisor
	 * of the CLK_INTERVAL so that scaling from a system clock
	 * tick to a profile clock tick is possible using integer math.
	 */
	if (profint > CLK_INTERVAL || (CLK_INTERVAL % profint) != 0)
		profint = CLK_INTERVAL;
	profscale = CLK_INTERVAL / profint;
}

startprofclock()
{
  unsigned short interval;

  /* stop timer B */
  clockcia->crb = clockcia->crb & 0xc0;

  /* load interval into registers.
     the clocks run at NTSC: 715.909kHz or PAL: 709.379kHz */

  interval = profint - 1;

  /* order of setting is important ! */
  clockcia->tblo = interval & 0xff;
  clockcia->tbhi = interval >> 8;

  /* enable interrupts for timer B */
  clockcia->icr = (1<<7) | (1<<1);

  /* start timer B in continuous shot mode */
  clockcia->crb = (clockcia->crb & 0xc0) | 1;
}

stopprofclock()
{
  /* stop timer B */
  clockcia->crb = clockcia->crb & 0xc0;
}

#ifdef PROF
/*
 * profclock() is expanded in line in lev6intr() unless profiling kernel.
 * Assumes it is called with clock interrupts blocked.
 */
profclock(pc, ps)
	caddr_t pc;
	int ps;
{
	/*
	 * Came from user mode.
	 * If this process is being profiled record the tick.
	 */
	if (USERMODE(ps)) {
		if (p->p_stats.p_prof.pr_scale)
			addupc(pc, &curproc->p_stats.p_prof, 1);
	}
	/*
	 * Came from kernel (supervisor) mode.
	 * If we are profiling the kernel, record the tick.
	 */
	else if (profiling < 2) {
		register int s = pc - s_lowpc;

		if (s < s_textsize)
			kcount[s / (HISTFRACTION * sizeof (*kcount))]++;
	}
	/*
	 * Kernel profiling was on but has been disabled.
	 * Mark as no longer profiling kernel and if all profiling done,
	 * disable the clock.
	 */
	if (profiling && (profon & PRF_KERNEL)) {
		profon &= ~PRF_KERNEL;
		if (profon == PRF_NONE)
			stopprofclock();
	}
}
#endif
#endif

/* this is a hook set by a clock driver for the configured realtime clock,
   returning plain current unix-time */
time_t (*gettod) __P((void));
int (*settod) __P((time_t));
void *clockaddr;

time_t a3gettod __P((void));
time_t a2gettod __P((void));
int a3settod __P((time_t));
int a2settod __P((time_t));

#ifdef DRACO
int draco_ds_read_bit __P((void *));
void draco_ds_write_bit __P((void *, int));
void draco_ds_reset __P((void *));

time_t dracogettod __P((void));

#ifdef __NOTYET__
int dracosettod __P((time_t));
#endif
#endif

int rtcinit __P((void));

/*
 * Initialize the time of day register, based on the time base which is, e.g.
 * from a filesystem.
 */
void
inittodr(base)
	time_t base;
{
	time_t timbuf = base;	/* assume no battery clock exists */

	if (gettod == NULL && rtcinit() == 0)
		printf("WARNING: no battery clock\n");
	else
		timbuf = gettod();

	if (timbuf < base) {
		printf("WARNING: bad date in battery clock\n");
		timbuf = base;
	}

	/* Battery clock does not store usec's, so forget about it. */
	time.tv_sec = timbuf;
}

void
resettodr()
{
	if (settod && settod(time.tv_sec) == 0)
		printf("Cannot set battery backed clock\n");
}

int
rtcinit()
{
	clockaddr = (void *)ztwomap(0xdc0000);
#ifdef DRACO
	if (is_draco()) {
		/* XXX to be done */
		gettod = dracogettod;
		settod = (void *)0;
	} else
#endif
	if (is_a3000() || is_a4000()) {
		if (a3gettod() == 0)
			return(0);
		gettod = a3gettod;
		settod = a3settod;
	} else {
		if (a2gettod() == 0)
			return(0);
		gettod = a2gettod;
		settod = a2settod;
	}
	return(1);
}

time_t
a3gettod()
{
	struct rtclock3000 *rt;
	struct clock_ymdhms dt;
	time_t secs;

	rt = clockaddr;

	/* hold clock */
	rt->control1 = A3CONTROL1_HOLD_CLOCK;

	/* Copy the info.  Careful about the order! */
	dt.dt_sec   = rt->second1 * 10 + rt->second2;
	dt.dt_min   = rt->minute1 * 10 + rt->minute2;
	dt.dt_hour  = rt->hour1   * 10 + rt->hour2;
	dt.dt_wday  = rt->weekday;
	dt.dt_day   = rt->day1    * 10 + rt->day2;
	dt.dt_mon   = rt->month1  * 10 + rt->month2;
	dt.dt_year  = rt->year1   * 10 + rt->year2;

	dt.dt_year += CLOCK_BASE_YEAR;

	/* let it run again.. */
	rt->control1 = A3CONTROL1_FREE_CLOCK;

	if ((dt.dt_hour > 23) ||
	    (dt.dt_wday > 6) ||
	    (dt.dt_day  > 31) ||
	    (dt.dt_mon  > 12) ||
	    (dt.dt_year < STARTOFTIME) || (dt.dt_year > 2036))
		return (0);

	secs = clock_ymdhms_to_secs(&dt);
	return (secs);
}

int
a3settod(secs)
	time_t secs;
{
	struct rtclock3000 *rt;
	struct clock_ymdhms dt;

	rt = clockaddr;
	/*
	 * there seem to be problems with the bitfield addressing
	 * currently used..
	 */

	if (! rt)
		return (0);

	clock_secs_to_ymdhms(secs, &dt);
	dt.dt_year -= CLOCK_BASE_YEAR;

	rt->control1 = A3CONTROL1_HOLD_CLOCK;
	rt->second1 = dt.dt_sec / 10;
	rt->second2 = dt.dt_sec % 10;
	rt->minute1 = dt.dt_min / 10;
	rt->minute2 = dt.dt_min % 10;
	rt->hour1   = dt.dt_hour / 10;
	rt->hour2   = dt.dt_hour % 10;
	rt->weekday = dt.dt_wday;
	rt->day1    = dt.dt_day / 10;
	rt->day2    = dt.dt_day % 10;
	rt->month1  = dt.dt_mon / 10;
	rt->month2  = dt.dt_mon % 10;
	rt->year1   = dt.dt_year / 10;
	rt->year2   = dt.dt_year % 10;
	rt->control1 = A3CONTROL1_FREE_CLOCK;

	return (1);
}

time_t
a2gettod()
{
	struct rtclock2000 *rt;
	struct clock_ymdhms dt;
	time_t secs;
	int i;

	rt = clockaddr;

	/*
	 * hold clock
	 */
	rt->control1 |= A2CONTROL1_HOLD;
	i = 0x1000;
	while (rt->control1 & A2CONTROL1_BUSY && i--)
		;
	if (rt->control1 & A2CONTROL1_BUSY)
		return (0);	/* Give up and say it's not there */

	/* Copy the info.  Careful about the order! */
	dt.dt_sec   = rt->second1 * 10 + rt->second2;
	dt.dt_min   = rt->minute1 * 10 + rt->minute2;
	dt.dt_hour  = (rt->hour1 & 3) * 10 + rt->hour2;
	dt.dt_day   = rt->day1    * 10 + rt->day2;
	dt.dt_mon   = rt->month1  * 10 + rt->month2;
	dt.dt_year  = rt->year1   * 10 + rt->year2;
	dt.dt_wday  = rt->weekday;

	/*
	 * The oki clock chip has a register to put the clock into
	 * 12/24h mode.
	 *
	 *  clockmode   |    A2HOUR1_PM
	 *  24h   12h   |  am = 0, pm = 1
	 * ---------------------------------
	 *   0    12    |       0
	 *   1     1    |       0
	 *  ..    ..    |       0
	 *  11    11    |       0
	 *  12    12    |       1
	 *  13     1    |       1
	 *  ..    ..    |       1
	 *  23    11    |       1
	 *
	 */

	if ((rt->control3 & A2CONTROL3_24HMODE) == 0) {
		if ((rt->hour1 & A2HOUR1_PM) == 0 && dt.dt_hour == 12)
			dt.dt_hour = 0;
		else if ((rt->hour1 & A2HOUR1_PM) && dt.dt_hour != 12)
			dt.dt_hour += 12;
	}

	/*
	 * release the clock
	 */
	rt->control1 &= ~A2CONTROL1_HOLD;

	dt.dt_year += CLOCK_BASE_YEAR;

	if ((dt.dt_hour > 23) ||
	    (dt.dt_day  > 31) ||
	    (dt.dt_mon  > 12) ||
	    (dt.dt_year < STARTOFTIME) || (dt.dt_year > 2036))
		return (0);

	secs = clock_ymdhms_to_secs(&dt);
	return (secs);
}

int
a2settod(secs)
	time_t secs;
{
	struct rtclock2000 *rt;
	struct clock_ymdhms dt;
	int ampm, i;

	rt = clockaddr;
	/*
	 * there seem to be problems with the bitfield addressing
	 * currently used..
	 */
	if (! rt)
		return (0);

	clock_secs_to_ymdhms(secs, &dt);
	dt.dt_year -= CLOCK_BASE_YEAR;

	/*
	 * hold clock
	 */
	rt->control1 |= A2CONTROL1_HOLD;
	i = 0x1000;
	while (rt->control1 & A2CONTROL1_BUSY && i--)
		;
	if (rt->control1 & A2CONTROL1_BUSY)
		return (0);	/* Give up and say it's not there */

	ampm = 0;
	if ((rt->control3 & A2CONTROL3_24HMODE) == 0) {
		if (dt.dt_hour >= 12) {
			ampm = A2HOUR1_PM;
			if (dt.dt_hour != 12)
				dt.dt_hour -= 12;
		} else if (dt.dt_hour == 0) {
			dt.dt_hour = 12;
		}
	}
	rt->hour1   = (dt.dt_hour / 10) | ampm;
	rt->hour2   = dt.dt_hour % 10;
	rt->second1 = dt.dt_sec / 10;
	rt->second2 = dt.dt_sec % 10;
	rt->minute1 = dt.dt_min / 10;
	rt->minute2 = dt.dt_min % 10;
	rt->day1    = dt.dt_day / 10;
	rt->day2    = dt.dt_day % 10;
	rt->month1  = dt.dt_mon / 10;
	rt->month2  = dt.dt_mon % 10;
	rt->year1   = dt.dt_year / 10;
	rt->year2   = dt.dt_year % 10;
	rt->weekday = dt.dt_wday;

	/*
	 * release the clock
	 */
	rt->control2 &= ~A2CONTROL1_HOLD;

	return (1);
}

#ifdef DRACO


int
draco_ds_read_bit(p)
	void *p;
{
	struct drioct *draco_ioct;

	draco_ioct = p;

	while (draco_ioct->io_status & DRSTAT_CLKBUSY);

	draco_ioct->io_clockw1 = 0;

	while (draco_ioct->io_status & DRSTAT_CLKBUSY);

	return (draco_ioct->io_status & DRSTAT_CLKDAT);
}

void
draco_ds_write_bit(p, b)
	void *p;
	int b;
{
	struct drioct *draco_ioct;

	draco_ioct = p;

	while (draco_ioct->io_status & DRSTAT_CLKBUSY);

	if (b)
		draco_ioct->io_clockw1 = 0;
	else
		draco_ioct->io_clockw0 = 0;
}

void
draco_ds_reset(p)
	void *p;
{
	struct drioct *draco_ioct;

	draco_ioct = p;

	draco_ioct->io_clockrst = 0;
}

/*
 * We could return 1/256 of a seconds, but would need to change the interface
 */

time_t
dracogettod()
{
	u_int32_t clkbuf;
	u_int8_t rombuf[8];
	int i;
	struct ds_handle draco_dsh;

	draco_dsh.ds_read_bit = draco_ds_read_bit;
	draco_dsh.ds_write_bit = draco_ds_write_bit;
	draco_dsh.ds_reset = draco_ds_reset;
	draco_dsh.ds_hw_handle = (void *)(DRCCADDR + DRIOCTLPG*NBPG);

	draco_dsh.ds_reset(draco_dsh.ds_hw_handle);

	ds_write_byte(&draco_dsh, DS_ROM_READ);
	for (i=0; i<8; ++i)
		rombuf[i] = ds_read_byte(&draco_dsh);

	printf("DraCo RTC: sernum %d (ROM %02x%02x%02x%02x%02x%02x%02x%02x)\n",
		(rombuf[3] << 24) + (rombuf[2] << 16) +
		(rombuf[1] << 8) + rombuf[7],
		rombuf[7], rombuf[6], rombuf[5], rombuf[4],
		rombuf[3], rombuf[2], rombuf[1], rombuf[0]);


	ds_write_byte(&draco_dsh, DS_MEM_READ_MEMORY);
	ds_write_byte(&draco_dsh, 0x03); /* low ads byte of realtime second */
	ds_write_byte(&draco_dsh, 0x02); /* high ads byte of realtime second */

	clkbuf = ds_read_byte(&draco_dsh)
	    + (ds_read_byte(&draco_dsh)<<8)
	    + (ds_read_byte(&draco_dsh)<<16)
	    + (ds_read_byte(&draco_dsh)<<24);

	/* BSD time is wr. 1.1.1970; AmigaOS time wrt. 1.1.1978 */

	clkbuf += (8*365 + 2) * 86400;

	return ((time_t)clkbuf);
}

#endif