if_es.c revision 1.57
1 /* $NetBSD: if_es.c,v 1.57 2017/02/22 09:45:15 nonaka Exp $ */ 2 3 /* 4 * Copyright (c) 1995 Michael L. Hitch 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 /* 29 * SMC 91C90 Single-Chip Ethernet Controller 30 */ 31 #include "opt_ddb.h" 32 #include "opt_inet.h" 33 #include "opt_ns.h" 34 35 #include <sys/cdefs.h> 36 __KERNEL_RCSID(0, "$NetBSD: if_es.c,v 1.57 2017/02/22 09:45:15 nonaka Exp $"); 37 38 39 #include <sys/param.h> 40 #include <sys/systm.h> 41 #include <sys/mbuf.h> 42 #include <sys/buf.h> 43 #include <sys/protosw.h> 44 #include <sys/socket.h> 45 #include <sys/syslog.h> 46 #include <sys/ioctl.h> 47 #include <sys/errno.h> 48 #include <sys/device.h> 49 50 #include <net/if.h> 51 #include <net/if_dl.h> 52 #include <net/if_ether.h> 53 #include <net/if_media.h> 54 55 #ifdef INET 56 #include <netinet/in.h> 57 #include <netinet/in_systm.h> 58 #include <netinet/in_var.h> 59 #include <netinet/ip.h> 60 #include <netinet/if_inarp.h> 61 #endif 62 63 #include <machine/cpu.h> 64 #include <amiga/amiga/device.h> 65 #include <amiga/amiga/isr.h> 66 #include <amiga/dev/zbusvar.h> 67 #include <amiga/dev/if_esreg.h> 68 69 #define SWAP(x) (((x & 0xff) << 8) | ((x >> 8) & 0xff)) 70 71 #define USEPKTBUF 72 73 /* 74 * Ethernet software status per interface. 75 * 76 * Each interface is referenced by a network interface structure, 77 * es_if, which the routing code uses to locate the interface. 78 * This structure contains the output queue for the interface, its address, ... 79 */ 80 struct es_softc { 81 device_t sc_dev; 82 struct isr sc_isr; 83 struct ethercom sc_ethercom; /* common Ethernet structures */ 84 struct ifmedia sc_media; /* our supported media */ 85 void *sc_base; /* base address of board */ 86 short sc_iflags; 87 unsigned short sc_intctl; 88 #ifdef ESDEBUG 89 int sc_debug; 90 short sc_intbusy; /* counter for interrupt rentered */ 91 short sc_smcbusy; /* counter for other rentry checks */ 92 #endif 93 }; 94 95 #include <net/bpf.h> 96 #include <net/bpfdesc.h> 97 98 #ifdef ESDEBUG 99 /* console error messages */ 100 int esdebug = 0; 101 int estxints = 0; /* IST_TX with TX enabled */ 102 int estxint2 = 0; /* IST_TX active after IST_TX_EMPTY */ 103 int estxint3 = 0; /* IST_TX interrupt processed */ 104 int estxint4 = 0; /* ~TEMPTY counts */ 105 int estxint5 = 0; /* IST_TX_EMPTY interrupts */ 106 void es_dump_smcregs(char *, union smcregs *); 107 #endif 108 109 int esintr(void *); 110 void esstart(struct ifnet *); 111 void eswatchdog(struct ifnet *); 112 int esioctl(struct ifnet *, u_long, void *); 113 void esrint(struct es_softc *); 114 void estint(struct es_softc *); 115 void esinit(struct es_softc *); 116 void esreset(struct es_softc *); 117 void esstop(struct es_softc *); 118 int esmediachange(struct ifnet *); 119 void esmediastatus(struct ifnet *, struct ifmediareq *); 120 121 int esmatch(device_t, cfdata_t, void *); 122 void esattach(device_t, device_t, void *); 123 124 CFATTACH_DECL_NEW(es, sizeof(struct es_softc), 125 esmatch, esattach, NULL, NULL); 126 127 int 128 esmatch(device_t parent, cfdata_t cf, void *aux) 129 { 130 struct zbus_args *zap = aux; 131 132 /* Ameristar A4066 ethernet card */ 133 if (zap->manid == 1053 && zap->prodid == 10) 134 return(1); 135 136 return (0); 137 } 138 139 /* 140 * Interface exists: make available by filling in network interface 141 * record. System will initialize the interface when it is ready 142 * to accept packets. 143 */ 144 void 145 esattach(device_t parent, device_t self, void *aux) 146 { 147 struct es_softc *sc = device_private(self); 148 struct zbus_args *zap = aux; 149 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 150 unsigned long ser; 151 u_int8_t myaddr[ETHER_ADDR_LEN]; 152 153 sc->sc_dev = self; 154 sc->sc_base = zap->va; 155 156 /* 157 * Manufacturer decides the 3 first bytes, i.e. ethernet vendor ID. 158 * (Currently only Ameristar.) 159 */ 160 myaddr[0] = 0x00; 161 myaddr[1] = 0x00; 162 myaddr[2] = 0x9f; 163 164 /* 165 * Serial number for board contains last 3 bytes. 166 */ 167 ser = (unsigned long) zap->serno; 168 169 myaddr[3] = (ser >> 16) & 0xff; 170 myaddr[4] = (ser >> 8) & 0xff; 171 myaddr[5] = (ser ) & 0xff; 172 173 /* Initialize ifnet structure. */ 174 memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 175 ifp->if_softc = sc; 176 ifp->if_ioctl = esioctl; 177 ifp->if_start = esstart; 178 ifp->if_watchdog = eswatchdog; 179 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | 180 IFF_MULTICAST; 181 182 ifmedia_init(&sc->sc_media, 0, esmediachange, esmediastatus); 183 ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_MANUAL, 0, NULL); 184 ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_MANUAL); 185 186 /* Attach the interface. */ 187 if_attach(ifp); 188 if_deferred_start_init(ifp, NULL); 189 ether_ifattach(ifp, myaddr); 190 191 /* Print additional info when attached. */ 192 printf(": address %s\n", ether_sprintf(myaddr)); 193 194 sc->sc_isr.isr_intr = esintr; 195 sc->sc_isr.isr_arg = sc; 196 sc->sc_isr.isr_ipl = 2; 197 add_isr(&sc->sc_isr); 198 } 199 200 #ifdef ESDEBUG 201 void 202 es_dump_smcregs(char *where, union smcregs *smc) 203 { 204 u_short cur_bank = smc->b0.bsr & BSR_MASK; 205 206 printf("SMC registers %p from %s bank %04x\n", smc, where, 207 smc->b0.bsr); 208 smc->b0.bsr = BSR_BANK0; 209 printf("TCR %04x EPHSR %04x RCR %04x ECR %04x MIR %04x MCR %04x\n", 210 SWAP(smc->b0.tcr), SWAP(smc->b0.ephsr), SWAP(smc->b0.rcr), 211 SWAP(smc->b0.ecr), SWAP(smc->b0.mir), SWAP(smc->b0.mcr)); 212 smc->b1.bsr = BSR_BANK1; 213 printf("CR %04x BAR %04x IAR %04x %04x %04x GPR %04x CTR %04x\n", 214 SWAP(smc->b1.cr), SWAP(smc->b1.bar), smc->b1.iar[0], smc->b1.iar[1], 215 smc->b1.iar[2], smc->b1.gpr, SWAP(smc->b1.ctr)); 216 smc->b2.bsr = BSR_BANK2; 217 printf("MMUCR %04x PNR %02x ARR %02x FIFO %04x PTR %04x", 218 SWAP(smc->b2.mmucr), smc->b2.pnr, smc->b2.arr, smc->b2.fifo, 219 SWAP(smc->b2.ptr)); 220 printf(" DATA %04x %04x IST %02x MSK %02x\n", smc->b2.data, 221 smc->b2.datax, smc->b2.ist, smc->b2.msk); 222 smc->b3.bsr = BSR_BANK3; 223 printf("MT %04x %04x %04x %04x\n", 224 smc->b3.mt[0], smc->b3.mt[1], smc->b3.mt[2], smc->b3.mt[3]); 225 smc->b3.bsr = cur_bank; 226 } 227 #endif 228 229 void 230 esstop(struct es_softc *sc) 231 { 232 union smcregs *smc = sc->sc_base; 233 234 /* 235 * Clear interrupt mask; disable all interrupts. 236 */ 237 smc->b2.bsr = BSR_BANK2; 238 smc->b2.msk = 0; 239 240 /* 241 * Disable transmitter and receiver. 242 */ 243 smc->b0.bsr = BSR_BANK0; 244 smc->b0.rcr = 0; 245 smc->b0.tcr = 0; 246 247 /* 248 * Cancel watchdog timer. 249 */ 250 sc->sc_ethercom.ec_if.if_timer = 0; 251 } 252 253 void 254 esinit(struct es_softc *sc) 255 { 256 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 257 union smcregs *smc = sc->sc_base; 258 int s; 259 260 s = splnet(); 261 262 #ifdef ESDEBUG 263 if (ifp->if_flags & IFF_RUNNING) 264 es_dump_smcregs("esinit", smc); 265 #endif 266 smc->b0.bsr = BSR_BANK0; /* Select bank 0 */ 267 smc->b0.rcr = RCR_EPH_RST; 268 smc->b0.rcr = 0; 269 smc->b3.bsr = BSR_BANK3; /* Select bank 3 */ 270 smc->b3.mt[0] = 0; /* clear Multicast table */ 271 smc->b3.mt[1] = 0; 272 smc->b3.mt[2] = 0; 273 smc->b3.mt[3] = 0; 274 /* XXX set Multicast table from Multicast list */ 275 smc->b1.bsr = BSR_BANK1; /* Select bank 1 */ 276 smc->b1.cr = CR_RAM32K | CR_NO_WAIT_ST | CR_SET_SQLCH; 277 smc->b1.ctr = CTR_AUTO_RLSE | CTR_TE_ENA; 278 smc->b1.iar[0] = *((const unsigned short *) &CLLADDR(ifp->if_sadl)[0]); 279 smc->b1.iar[1] = *((const unsigned short *) &CLLADDR(ifp->if_sadl)[2]); 280 smc->b1.iar[2] = *((const unsigned short *) &CLLADDR(ifp->if_sadl)[4]); 281 smc->b2.bsr = BSR_BANK2; /* Select bank 2 */ 282 smc->b2.mmucr = MMUCR_RESET; 283 smc->b0.bsr = BSR_BANK0; /* Select bank 0 */ 284 smc->b0.mcr = SWAP(0x0020); /* reserve 8K for transmit buffers */ 285 smc->b0.tcr = TCR_PAD_EN | (TCR_TXENA + TCR_MON_CSN); 286 smc->b0.rcr = RCR_FILT_CAR | RCR_STRIP_CRC | RCR_RXEN | RCR_ALLMUL; 287 /* XXX add promiscuous flags */ 288 smc->b2.bsr = BSR_BANK2; /* Select bank 2 */ 289 smc->b2.msk = sc->sc_intctl = MSK_RX_OVRN | MSK_RX | MSK_EPHINT; 290 291 /* Interface is now 'running', with no output active. */ 292 ifp->if_flags |= IFF_RUNNING; 293 ifp->if_flags &= ~IFF_OACTIVE; 294 295 /* Attempt to start output, if any. */ 296 if_schedule_deferred_start(ifp); 297 298 splx(s); 299 } 300 301 int 302 esintr(void *arg) 303 { 304 struct es_softc *sc = arg; 305 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 306 u_short intsts, intact; 307 union smcregs *smc; 308 int s = splnet(); 309 310 smc = sc->sc_base; 311 #ifdef ESDEBUG 312 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2 && 313 ifp->if_flags & IFF_RUNNING) { 314 printf("%s: intr BSR not 2: %04x\n", device_xname(sc->sc_dev), 315 smc->b2.bsr); 316 smc->b2.bsr = BSR_BANK2; 317 } 318 #endif 319 intsts = smc->b2.ist; 320 intact = smc->b2.msk & intsts; 321 if ((intact) == 0) { 322 splx(s); 323 return (0); 324 } 325 #ifdef ESDEBUG 326 if (esdebug) 327 printf ("%s: esintr ist %02x msk %02x", 328 device_xname(sc->sc_dev), intsts, smc->b2.msk); 329 if (sc->sc_intbusy++) { 330 printf("%s: esintr re-entered\n", device_xname(sc->sc_dev)); 331 panic("esintr re-entered"); 332 } 333 if (sc->sc_smcbusy) 334 printf("%s: esintr interrupted busy %d\n", device_xname(sc->sc_dev), 335 sc->sc_smcbusy); 336 #endif 337 smc->b2.msk = 0; 338 #ifdef ESDEBUG 339 if (esdebug) 340 printf ("=>%02x%02x pnr %02x arr %02x fifo %04x\n", 341 smc->b2.ist, smc->b2.ist, smc->b2.pnr, smc->b2.arr, 342 smc->b2.fifo); 343 #endif 344 if (intact & IST_ALLOC) { 345 sc->sc_intctl &= ~MSK_ALLOC; 346 #ifdef ESDEBUG 347 if (esdebug || 1) 348 printf ("%s: ist %02x", device_xname(sc->sc_dev), 349 intsts); 350 #endif 351 if ((smc->b2.arr & ARR_FAILED) == 0) { 352 u_char save_pnr; 353 #ifdef ESDEBUG 354 if (esdebug || 1) 355 printf (" arr %02x\n", smc->b2.arr); 356 #endif 357 save_pnr = smc->b2.pnr; 358 smc->b2.pnr = smc->b2.arr; 359 smc->b2.mmucr = MMUCR_RLSPKT; 360 while (smc->b2.mmucr & MMUCR_BUSY) 361 ; 362 smc->b2.pnr = save_pnr; 363 ifp->if_flags &= ~IFF_OACTIVE; 364 ifp->if_timer = 0; 365 } 366 #ifdef ESDEBUG 367 else if (esdebug || 1) 368 printf (" IST_ALLOC with ARR_FAILED?\n"); 369 #endif 370 } 371 #ifdef ESDEBUG 372 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 373 printf("%s: intr+ BSR not 2: %04x\n", device_xname(sc->sc_dev), 374 smc->b2.bsr); 375 smc->b2.bsr = BSR_BANK2; 376 } 377 #endif 378 while ((smc->b2.fifo & FIFO_REMPTY) == 0) { 379 esrint(sc); 380 } 381 #ifdef ESDEBUG 382 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 383 printf("%s: intr++ BSR not 2: %04x\n", device_xname(sc->sc_dev), 384 smc->b2.bsr); 385 smc->b2.bsr = BSR_BANK2; 386 } 387 #endif 388 if (intact & IST_RX_OVRN) { 389 printf ("%s: Overrun ist %02x", device_xname(sc->sc_dev), 390 intsts); 391 smc->b2.ist = ACK_RX_OVRN; 392 printf ("->%02x\n", smc->b2.ist); 393 ifp->if_ierrors++; 394 } 395 if (intact & IST_TX_EMPTY) { 396 u_short ecr; 397 #ifdef ESDEBUG 398 if (esdebug) 399 printf ("%s: TX EMPTY %02x", 400 device_xname(sc->sc_dev), intsts); 401 ++estxint5; /* count # IST_TX_EMPTY ints */ 402 #endif 403 smc->b2.ist = ACK_TX_EMPTY; 404 sc->sc_intctl &= ~(MSK_TX_EMPTY | MSK_TX); 405 ifp->if_timer = 0; 406 #ifdef ESDEBUG 407 if (esdebug) 408 printf ("->%02x intcl %x pnr %02x arr %02x\n", 409 smc->b2.ist, sc->sc_intctl, smc->b2.pnr, 410 smc->b2.arr); 411 #endif 412 if (smc->b2.ist & IST_TX) { 413 intact |= IST_TX; 414 #ifdef ESDEBUG 415 ++estxint2; /* count # TX after TX_EMPTY */ 416 #endif 417 } else { 418 smc->b0.bsr = BSR_BANK0; 419 ecr = smc->b0.ecr; /* Get error counters */ 420 if (ecr & 0xff00) 421 ifp->if_collisions += ((ecr >> 8) & 15) + 422 ((ecr >> 11) & 0x1e); 423 smc->b2.bsr = BSR_BANK2; 424 #if 0 425 smc->b2.mmucr = MMUCR_RESET_TX; /* XXX reset TX FIFO */ 426 #endif 427 } 428 } 429 if (intact & IST_TX) { 430 u_char tx_pnr, save_pnr; 431 u_short save_ptr, ephsr, tcr; 432 int n = 0; 433 #ifdef ESDEBUG 434 if (esdebug) { 435 printf ("%s: TX INT ist %02x", 436 device_xname(sc->sc_dev), intsts); 437 printf ("->%02x\n", smc->b2.ist); 438 } 439 ++estxint3; /* count # IST_TX */ 440 #endif 441 zzzz: 442 #ifdef ESDEBUG 443 ++estxint4; /* count # ~TEMPTY */ 444 #endif 445 smc->b0.bsr = BSR_BANK0; 446 ephsr = smc->b0.ephsr; /* get EPHSR */ 447 __USE(ephsr); 448 tcr = smc->b0.tcr; /* and TCR */ 449 smc->b2.bsr = BSR_BANK2; 450 save_ptr = smc->b2.ptr; 451 save_pnr = smc->b2.pnr; 452 tx_pnr = smc->b2.fifo >> 8; /* pktno from completion fifo */ 453 smc->b2.pnr = tx_pnr; /* set TX packet number */ 454 smc->b2.ptr = PTR_READ; /* point to status word */ 455 #if 0 /* XXXX */ 456 printf("%s: esintr TXINT IST %02x PNR %02x(%d)", 457 device_xname(sc->sc_dev), smc->b2.ist, 458 tx_pnr, n); 459 printf(" Status %04x", smc->b2.data); 460 printf(" EPHSR %04x\n", ephsr); 461 #endif 462 if ((smc->b2.data & EPHSR_TX_SUC) == 0 && (tcr & TCR_TXENA) == 0) { 463 /* 464 * Transmitter was stopped for some error. Enqueue 465 * the packet again and restart the transmitter. 466 * May need some check to limit the number of retries. 467 */ 468 smc->b2.mmucr = MMUCR_ENQ_TX; 469 smc->b0.bsr = BSR_BANK0; 470 smc->b0.tcr |= TCR_TXENA; 471 smc->b2.bsr = BSR_BANK2; 472 ifp->if_oerrors++; 473 sc->sc_intctl |= MSK_TX_EMPTY | MSK_TX; 474 } else { 475 /* 476 * This shouldn't have happened: IST_TX indicates 477 * the TX completion FIFO is not empty, but the 478 * status for the packet on the completion FIFO 479 * shows that the transmit was successful. Since 480 * AutoRelease is being used, a successful transmit 481 * should not result in a packet on the completion 482 * FIFO. Also, that packet doesn't seem to want 483 * to be acknowledged. If this occurs, just reset 484 * the TX FIFOs. 485 */ 486 #if 1 487 if (smc->b2.ist & IST_TX_EMPTY) { 488 smc->b2.mmucr = MMUCR_RESET_TX; 489 sc->sc_intctl &= ~(MSK_TX_EMPTY | MSK_TX); 490 ifp->if_timer = 0; 491 } 492 #endif 493 #ifdef ESDEBUG 494 ++estxints; /* count IST_TX with TX enabled */ 495 #endif 496 } 497 smc->b2.pnr = save_pnr; 498 smc->b2.ptr = save_ptr; 499 smc->b2.ist = ACK_TX; 500 501 if ((smc->b2.fifo & FIFO_TEMPTY) == 0 && n++ < 32) { 502 #if 0 /* XXXX */ 503 printf("%s: multiple TX int(%2d) pnr %02x ist %02x fifo %04x", 504 device_xname(sc->sc_dev), n, tx_pnr, smc->b2.ist, smc->b2.fifo); 505 smc->w2.istmsk = ACK_TX << 8; 506 printf(" %04x\n", smc->b2.fifo); 507 #endif 508 if (tx_pnr != (smc->b2.fifo >> 8)) 509 goto zzzz; 510 } 511 } 512 if (intact & IST_EPHINT) { 513 ifp->if_oerrors++; 514 esreset(sc); 515 } 516 /* output packets */ 517 estint(sc); 518 #ifdef ESDEBUG 519 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 520 printf("%s: intr+++ BSR not 2: %04x\n", device_xname(sc->sc_dev), 521 smc->b2.bsr); 522 smc->b2.bsr = BSR_BANK2; 523 } 524 #endif 525 smc->b2.msk = sc->sc_intctl; 526 #ifdef ESDEBUG 527 if (--sc->sc_intbusy) { 528 printf("%s: esintr busy on exit\n", device_xname(sc->sc_dev)); 529 panic("esintr busy on exit"); 530 } 531 #endif 532 splx(s); 533 return (1); 534 } 535 536 void 537 esrint(struct es_softc *sc) 538 { 539 union smcregs *smc = sc->sc_base; 540 u_short len; 541 short cnt; 542 u_short pktctlw, pktlen, *buf; 543 volatile u_short *data; 544 #if 0 545 u_long *lbuf; 546 volatile u_long *ldata; 547 #endif 548 struct ifnet *ifp; 549 struct mbuf *top, **mp, *m; 550 #ifdef USEPKTBUF 551 u_char *b, pktbuf[1530]; 552 #endif 553 #ifdef ESDEBUG 554 int i; 555 #endif 556 557 ifp = &sc->sc_ethercom.ec_if; 558 #ifdef ESDEBUG 559 if (esdebug) 560 printf ("%s: esrint fifo %04x", device_xname(sc->sc_dev), 561 smc->b2.fifo); 562 if (sc->sc_smcbusy++) { 563 printf("%s: esrint re-entered\n", device_xname(sc->sc_dev)); 564 panic("esrint re-entered"); 565 } 566 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 567 printf("%s: rint BSR not 2: %04x\n", device_xname(sc->sc_dev), 568 smc->b2.bsr); 569 smc->b2.bsr = BSR_BANK2; 570 } 571 #endif 572 data = (volatile u_short *)&smc->b2.data; 573 smc->b2.ptr = PTR_RCV | PTR_AUTOINCR | PTR_READ | SWAP(0x0002); 574 (void) smc->b2.mmucr; 575 #ifdef ESDEBUG 576 if (esdebug) 577 printf ("->%04x", smc->b2.fifo); 578 #endif 579 len = *data; 580 len = SWAP(len); /* Careful of macro side-effects */ 581 #ifdef ESDEBUG 582 if (esdebug) 583 printf (" length %d", len); 584 #endif 585 smc->b2.ptr = PTR_RCV | (PTR_AUTOINCR + PTR_READ) | SWAP(0x0000); 586 (void) smc->b2.mmucr; 587 pktctlw = *data; 588 pktlen = *data; 589 pktctlw = SWAP(pktctlw); 590 pktlen = SWAP(pktlen) - 6; 591 if (pktctlw & RFSW_ODDFRM) 592 pktlen++; 593 if (len > 1530) { 594 printf("%s: Corrupted packet length-sts %04x bytcnt %04x len %04x bank %04x\n", 595 device_xname(sc->sc_dev), pktctlw, pktlen, len, smc->b2.bsr); 596 /* XXX ignore packet, or just truncate? */ 597 #if defined(ESDEBUG) && defined(DDB) 598 if ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) 599 Debugger(); 600 #endif 601 smc->b2.bsr = BSR_BANK2; 602 smc->b2.mmucr = MMUCR_REMRLS_RX; 603 while (smc->b2.mmucr & MMUCR_BUSY) 604 ; 605 ++ifp->if_ierrors; 606 #ifdef ESDEBUG 607 if (--sc->sc_smcbusy) { 608 printf("%s: esrintr busy on bad packet exit\n", 609 device_xname(sc->sc_dev)); 610 panic("esrintr busy on exit"); 611 } 612 #endif 613 return; 614 } 615 #ifdef USEPKTBUF 616 #if 0 617 lbuf = (u_long *) pktbuf; 618 ldata = (u_long *)data; 619 cnt = (len - 4) / 4; 620 while (cnt--) 621 *lbuf++ = *ldata; 622 if ((len - 4) & 2) { 623 buf = (u_short *) lbuf; 624 *buf = *data; 625 } 626 #else 627 buf = (u_short *)pktbuf; 628 cnt = (len - 4) / 2; 629 while (cnt--) 630 *buf++ = *data; 631 #endif 632 smc->b2.mmucr = MMUCR_REMRLS_RX; 633 while (smc->b2.mmucr & MMUCR_BUSY) 634 ; 635 #ifdef ESDEBUG 636 if (pktctlw & (RFSW_ALGNERR | RFSW_BADCRC | RFSW_TOOLNG | RFSW_TOOSHORT)) { 637 printf ("%s: Packet error %04x\n", device_xname(sc->sc_dev), pktctlw); 638 /* count input error? */ 639 } 640 if (esdebug) { 641 printf (" pktctlw %04x pktlen %04x fifo %04x\n", pktctlw, pktlen, 642 smc->b2.fifo); 643 for (i = 0; i < pktlen; ++i) 644 printf ("%02x%s", pktbuf[i], ((i & 31) == 31) ? "\n" : 645 ""); 646 if (i & 31) 647 printf ("\n"); 648 } 649 #endif 650 #else /* USEPKTBUF */ 651 /* XXX copy directly from controller to mbuf */ 652 #ifdef ESDEBUG 653 if (pktctlw & (RFSW_ALGNERR | RFSW_BADCRC | RFSW_TOOLNG | RFSW_TOOSHORT)) { 654 printf ("%s: Packet error %04x\n", device_xname(sc->sc_dev), pktctlw); 655 /* count input error? */ 656 } 657 if (esdebug) { 658 printf (" pktctlw %04x pktlen %04x fifo %04x\n", pktctlw, pktlen, 659 smc->b2.fifo); 660 } 661 #endif 662 #endif /* USEPKTBUF */ 663 MGETHDR(m, M_DONTWAIT, MT_DATA); 664 if (m == NULL) 665 return; 666 m_set_rcvif(m, ifp); 667 m->m_pkthdr.len = pktlen; 668 len = MHLEN; 669 top = NULL; 670 mp = ⊤ 671 #ifdef USEPKTBUF 672 b = pktbuf; 673 #endif 674 while (pktlen > 0) { 675 if (top) { 676 MGET(m, M_DONTWAIT, MT_DATA); 677 if (m == 0) { 678 m_freem(top); 679 return; 680 } 681 len = MLEN; 682 } 683 if (pktlen >= MINCLSIZE) { 684 MCLGET(m, M_DONTWAIT); 685 if (m->m_flags & M_EXT) 686 len = MCLBYTES; 687 } 688 m->m_len = len = min(pktlen, len); 689 #ifdef USEPKTBUF 690 memcpy(mtod(m, void *), (void *)b, len); 691 b += len; 692 #else /* USEPKTBUF */ 693 buf = mtod(m, u_short *); 694 cnt = len / 2; 695 while (cnt--) 696 *buf++ = *data; 697 if (len & 1) 698 *buf = *data; /* XXX should be byte store */ 699 #ifdef ESDEBUG 700 if (esdebug) { 701 buf = mtod(m, u_short *); 702 for (i = 0; i < len; ++i) 703 printf ("%02x%s", ((u_char *)buf)[i], 704 ((i & 31) == 31) ? "\n" : ""); 705 if (i & 31) 706 printf ("\n"); 707 } 708 #endif 709 #endif /* USEPKTBUF */ 710 pktlen -= len; 711 *mp = m; 712 mp = &m->m_next; 713 } 714 #ifndef USEPKTBUF 715 smc->b2.mmucr = MMUCR_REMRLS_RX; 716 while (smc->b2.mmucr & MMUCR_BUSY) 717 ; 718 #endif 719 /* 720 * Check if there's a BPF listener on this interface. If so, hand off 721 * the raw packet to bpf. 722 */ 723 if_percpuq_enqueue(ifp->if_percpuq, top); 724 #ifdef ESDEBUG 725 if (--sc->sc_smcbusy) { 726 printf("%s: esintr busy on exit\n", device_xname(sc->sc_dev)); 727 panic("esintr busy on exit"); 728 } 729 #endif 730 } 731 732 void 733 estint(struct es_softc *sc) 734 { 735 736 esstart(&sc->sc_ethercom.ec_if); 737 } 738 739 void 740 esstart(struct ifnet *ifp) 741 { 742 struct es_softc *sc = ifp->if_softc; 743 union smcregs *smc = sc->sc_base; 744 struct mbuf *m0, *m; 745 #ifdef USEPKTBUF 746 u_short pktbuf[ETHERMTU + 2]; 747 #else 748 u_short oddbyte, needbyte; 749 #endif 750 u_short pktctlw, pktlen; 751 u_short *buf; 752 volatile u_short *data; 753 #if 0 754 u_long *lbuf; 755 volatile u_long *ldata; 756 #endif 757 short cnt; 758 int i; 759 u_char active_pnr; 760 761 if ((sc->sc_ethercom.ec_if.if_flags & (IFF_RUNNING | IFF_OACTIVE)) != 762 IFF_RUNNING) 763 return; 764 765 #ifdef ESDEBUG 766 if (sc->sc_smcbusy++) { 767 printf("%s: esstart re-entered\n", device_xname(sc->sc_dev)); 768 panic("esstart re-entred"); 769 } 770 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 771 printf("%s: esstart BSR not 2: %04x\n", device_xname(sc->sc_dev), 772 smc->b2.bsr); 773 smc->b2.bsr = BSR_BANK2; 774 } 775 #endif 776 for (;;) { 777 #ifdef ESDEBUG 778 u_short start_ptr, end_ptr; 779 #endif 780 /* 781 * Sneak a peek at the next packet to get the length 782 * and see if the SMC 91C90 can accept it. 783 */ 784 m = sc->sc_ethercom.ec_if.if_snd.ifq_head; 785 if (!m) 786 break; 787 #ifdef ESDEBUG 788 if (esdebug && (m->m_next || m->m_len & 1)) 789 printf("%s: esstart m_next %p m_len %d\n", 790 device_xname(sc->sc_dev), m->m_next, m->m_len); 791 #endif 792 for (m0 = m, pktlen = 0; m0; m0 = m0->m_next) 793 pktlen += m0->m_len; 794 pktctlw = 0; 795 pktlen += 4; 796 if (pktlen & 1) 797 ++pktlen; /* control byte after last byte */ 798 else 799 pktlen += 2; /* control byte after pad byte */ 800 smc->b2.mmucr = MMUCR_ALLOC | (pktlen & 0x0700); 801 for (i = 0; i <= 5; ++i) 802 if ((smc->b2.arr & ARR_FAILED) == 0) 803 break; 804 if (smc->b2.arr & ARR_FAILED) { 805 sc->sc_ethercom.ec_if.if_flags |= IFF_OACTIVE; 806 sc->sc_intctl |= MSK_ALLOC; 807 sc->sc_ethercom.ec_if.if_timer = 5; 808 break; 809 } 810 active_pnr = smc->b2.pnr = smc->b2.arr; 811 812 #ifdef ESDEBUG 813 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 814 printf("%s: esstart+ BSR not 2: %04x\n", device_xname(sc->sc_dev), 815 smc->b2.bsr); 816 smc->b2.bsr = BSR_BANK2; 817 } 818 #endif 819 IF_DEQUEUE(&sc->sc_ethercom.ec_if.if_snd, m); 820 smc->b2.ptr = PTR_AUTOINCR; 821 (void) smc->b2.mmucr; 822 data = (volatile u_short *)&smc->b2.data; 823 *data = SWAP(pktctlw); 824 *data = SWAP(pktlen); 825 #ifdef ESDEBUG 826 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 827 printf("%s: esstart++ BSR not 2: %04x\n", device_xname(sc->sc_dev), 828 smc->b2.bsr); 829 smc->b2.bsr = BSR_BANK2; 830 } 831 #endif 832 #ifdef USEPKTBUF 833 i = 0; 834 for (m0 = m; m; m = m->m_next) { 835 memcpy((char *)pktbuf + i, mtod(m, void *), m->m_len); 836 i += m->m_len; 837 } 838 839 if (i & 1) /* Figure out where to put control byte */ 840 pktbuf[i/2] = (pktbuf[i/2] & 0xff00) | CTLB_ODD; 841 else 842 pktbuf[i/2] = 0; 843 pktlen -= 4; 844 #ifdef ESDEBUG 845 if (pktlen > sizeof(pktbuf) && i > (sizeof(pktbuf) * 2)) 846 printf("%s: esstart packet longer than pktbuf\n", 847 device_xname(sc->sc_dev)); 848 #endif 849 #if 0 /* doesn't quite work? */ 850 lbuf = (u_long *)(pktbuf); 851 ldata = (u_long *)data; 852 cnt = pktlen / 4; 853 while(cnt--) 854 *ldata = *lbuf++; 855 if (pktlen & 2) { 856 buf = (u_short *)lbuf; 857 *data = *buf; 858 } 859 #else 860 #ifdef ESDEBUG 861 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 862 printf("%s: esstart++2 BSR not 2: %04x\n", device_xname(sc->sc_dev), 863 smc->b2.bsr); 864 smc->b2.bsr = BSR_BANK2; 865 } 866 start_ptr = SWAP(smc->b2.ptr); /* save PTR before copy */ 867 #endif 868 buf = pktbuf; 869 cnt = pktlen / 2; 870 while (cnt--) 871 *data = *buf++; 872 #ifdef ESDEBUG 873 end_ptr = SWAP(smc->b2.ptr); /* save PTR after copy */ 874 #endif 875 #endif 876 #else /* USEPKTBUF */ 877 pktctlw = 0; 878 oddbyte = needbyte = 0; 879 for (m0 = m; m; m = m->m_next) { 880 buf = mtod(m, u_short *); 881 cnt = m->m_len / 2; 882 if (needbyte) { 883 oddbyte |= *buf >> 8; 884 *data = oddbyte; 885 } 886 while (cnt--) 887 *data = *buf++; 888 if (m->m_len & 1) 889 pktctlw = (*buf & 0xff00) | CTLB_ODD; 890 if (m->m_len & 1 && m->m_next) 891 printf("%s: esstart odd byte count in mbuf\n", 892 device_xname(sc->sc_dev)); 893 } 894 *data = pktctlw; 895 #endif /* USEPKTBUF */ 896 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 897 /* 898 * The bank select register has changed. This seems 899 * to happen with my A2000/Zeus once in a while. It 900 * appears that the Ethernet chip resets while 901 * copying the transmit buffer. Requeue the current 902 * transmit buffer and reinitialize the interface. 903 * The initialize routine will take care of 904 * retransmitting the buffer. mhitch 905 */ 906 #ifdef DIAGNOSTIC 907 printf("%s: esstart+++ BSR not 2: %04x\n", 908 device_xname(sc->sc_dev), smc->b2.bsr); 909 #endif 910 smc->b2.bsr = BSR_BANK2; 911 #ifdef ESDEBUG 912 printf("start_ptr %04x end_ptr %04x cur ptr %04x\n", 913 start_ptr, end_ptr, SWAP(smc->b2.ptr)); 914 --sc->sc_smcbusy; 915 #endif 916 IF_PREPEND(&sc->sc_ethercom.ec_if.if_snd, m0); 917 esinit(sc); /* It's really hosed - reset */ 918 return; 919 } 920 smc->b2.mmucr = MMUCR_ENQ_TX; 921 if (smc->b2.pnr != active_pnr) 922 printf("%s: esstart - PNR changed %x->%x\n", 923 device_xname(sc->sc_dev), active_pnr, smc->b2.pnr); 924 bpf_mtap(&sc->sc_ethercom.ec_if, m0); 925 m_freem(m0); 926 sc->sc_ethercom.ec_if.if_opackets++; /* move to interrupt? */ 927 sc->sc_intctl |= MSK_TX_EMPTY | MSK_TX; 928 sc->sc_ethercom.ec_if.if_timer = 5; 929 } 930 smc->b2.msk = sc->sc_intctl; 931 #ifdef ESDEBUG 932 while ((smc->b2.bsr & BSR_MASK) != BSR_BANK2) { 933 printf("%s: esstart++++ BSR not 2: %04x\n", device_xname(sc->sc_dev), 934 smc->b2.bsr); 935 smc->b2.bsr = BSR_BANK2; 936 } 937 if (--sc->sc_smcbusy) { 938 printf("%s: esstart busy on exit\n", device_xname(sc->sc_dev)); 939 panic("esstart busy on exit"); 940 } 941 #endif 942 } 943 944 int 945 esioctl(struct ifnet *ifp, u_long cmd, void *data) 946 { 947 struct es_softc *sc = ifp->if_softc; 948 register struct ifaddr *ifa = (struct ifaddr *)data; 949 struct ifreq *ifr = (struct ifreq *)data; 950 int s, error = 0; 951 952 s = splnet(); 953 954 switch (cmd) { 955 956 case SIOCINITIFADDR: 957 ifp->if_flags |= IFF_UP; 958 959 switch (ifa->ifa_addr->sa_family) { 960 #ifdef INET 961 case AF_INET: 962 esinit(sc); 963 arp_ifinit(ifp, ifa); 964 break; 965 #endif 966 default: 967 esinit(sc); 968 break; 969 } 970 break; 971 972 case SIOCSIFFLAGS: 973 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 974 break; 975 /* XXX see the comment in ed_ioctl() about code re-use */ 976 /* 977 * If interface is marked down and it is running, then stop it 978 */ 979 if ((ifp->if_flags & IFF_UP) == 0 && 980 (ifp->if_flags & IFF_RUNNING) != 0) { 981 /* 982 * If interface is marked down and it is running, then 983 * stop it. 984 */ 985 esstop(sc); 986 ifp->if_flags &= ~IFF_RUNNING; 987 } else if ((ifp->if_flags & IFF_UP) != 0 && 988 (ifp->if_flags & IFF_RUNNING) == 0) { 989 /* 990 * If interface is marked up and it is stopped, then 991 * start it. 992 */ 993 esinit(sc); 994 } else { 995 /* 996 * Reset the interface to pick up changes in any other 997 * flags that affect hardware registers. 998 */ 999 esstop(sc); 1000 esinit(sc); 1001 } 1002 #ifdef ESDEBUG 1003 if (ifp->if_flags & IFF_DEBUG) 1004 esdebug = sc->sc_debug = 1; 1005 else 1006 esdebug = sc->sc_debug = 0; 1007 #endif 1008 break; 1009 1010 case SIOCADDMULTI: 1011 case SIOCDELMULTI: 1012 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { 1013 /* 1014 * Multicast list has changed; set the hardware filter 1015 * accordingly. 1016 */ 1017 if (ifp->if_flags & IFF_RUNNING) { 1018 /* XXX */ 1019 } 1020 error = 0; 1021 } 1022 break; 1023 1024 case SIOCGIFMEDIA: 1025 case SIOCSIFMEDIA: 1026 error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, cmd); 1027 break; 1028 1029 default: 1030 error = ether_ioctl(ifp, cmd, data); 1031 break; 1032 } 1033 1034 splx(s); 1035 return (error); 1036 } 1037 1038 /* 1039 * Reset the interface. 1040 */ 1041 void 1042 esreset(struct es_softc *sc) 1043 { 1044 int s; 1045 1046 s = splnet(); 1047 esstop(sc); 1048 esinit(sc); 1049 splx(s); 1050 } 1051 1052 void 1053 eswatchdog(struct ifnet *ifp) 1054 { 1055 struct es_softc *sc = ifp->if_softc; 1056 1057 log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev)); 1058 ++ifp->if_oerrors; 1059 1060 esreset(sc); 1061 } 1062 1063 int 1064 esmediachange(struct ifnet *ifp) 1065 { 1066 return 0; 1067 } 1068 1069 void 1070 esmediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 1071 { 1072 } 1073
Indexes created Mon Sep 29 21:09:56 GMT 2025