if_es.c revision 1.9
1 /* $NetBSD: if_es.c,v 1.9 1996/03/17 01:17:33 thorpej Exp $ */ 2 3 /* 4 * Copyright (c) 1995 Michael L. Hitch 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Michael L. Hitch. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * SMC 91C90 Single-Chip Ethernet Controller 35 */ 36 37 #include "bpfilter.h" 38 39 #include <sys/param.h> 40 #include <sys/systm.h> 41 #include <sys/mbuf.h> 42 #include <sys/buf.h> 43 #include <sys/protosw.h> 44 #include <sys/socket.h> 45 #include <sys/syslog.h> 46 #include <sys/ioctl.h> 47 #include <sys/errno.h> 48 #include <sys/device.h> 49 50 #include <net/if.h> 51 #include <net/netisr.h> 52 #include <net/route.h> 53 54 #ifdef INET 55 #include <netinet/in.h> 56 #include <netinet/in_systm.h> 57 #include <netinet/in_var.h> 58 #include <netinet/ip.h> 59 #include <netinet/if_ether.h> 60 #endif 61 62 #ifdef NS 63 #include <netns/ns.h> 64 #include <netns/ns_if.h> 65 #endif 66 67 #include <machine/cpu.h> 68 #include <machine/mtpr.h> 69 #include <amiga/amiga/device.h> 70 #include <amiga/amiga/isr.h> 71 #include <amiga/dev/zbusvar.h> 72 #include <amiga/dev/if_esreg.h> 73 74 #define SWAP(x) (((x & 0xff) << 8) | ((x >> 8) & 0xff)) 75 76 #define ESDEBUG 77 #define USEPKTBUF 78 79 /* 80 * Ethernet software status per interface. 81 * 82 * Each interface is referenced by a network interface structure, 83 * es_if, which the routing code uses to locate the interface. 84 * This structure contains the output queue for the interface, its address, ... 85 */ 86 struct es_softc { 87 struct device sc_dev; 88 struct isr sc_isr; 89 struct arpcom sc_arpcom; /* common Ethernet structures */ 90 void *sc_base; /* base address of board */ 91 short sc_iflags; 92 unsigned short sc_intctl; 93 #ifdef ESDEBUG 94 int sc_debug; 95 short sc_intbusy; 96 short sc_smcbusy; 97 #endif 98 }; 99 100 #if NBPFILTER > 0 101 #include <net/bpf.h> 102 #include <net/bpfdesc.h> 103 #endif 104 105 #ifdef ESDEBUG 106 /* console error messages */ 107 int esdebug = 0; 108 int estxints = 0; /* IST_TX with TX enabled */ 109 int estxint2 = 0; /* IST_TX active after IST_TX_EMPTY */ 110 int estxint3 = 0; /* IST_TX interrupt processed */ 111 int estxint4 = 0; /* ~TEMPTY counts */ 112 int estxint5 = 0; /* IST_TX_EMPTY interrupts */ 113 #endif 114 115 int esintr __P((struct es_softc *)); 116 void esstart __P((struct ifnet *)); 117 void eswatchdog __P((int)); 118 int esioctl __P((struct ifnet *, u_long, caddr_t)); 119 void esrint __P((struct es_softc *)); 120 void estint __P((struct es_softc *)); 121 void esinit __P((struct es_softc *)); 122 void esreset __P((struct es_softc *)); 123 124 int esmatch __P((struct device *, void *, void *)); 125 void esattach __P((struct device *, struct device *, void *)); 126 127 struct cfattach es_ca = { 128 sizeof(stuct es_softc), esmatch, esattach 129 }; 130 131 struct cfdriver es_cd = { 132 NULL, "es", DV_IFNET 133 }; 134 135 int 136 esmatch(parent, match, aux) 137 struct device *parent; 138 void *match, *aux; 139 { 140 struct zbus_args *zap = aux; 141 142 /* Ameristar A4066 ethernet card */ 143 if (zap->manid == 1053 && zap->prodid == 10) 144 return(1); 145 146 return (0); 147 } 148 149 /* 150 * Interface exists: make available by filling in network interface 151 * record. System will initialize the interface when it is ready 152 * to accept packets. 153 */ 154 void 155 esattach(parent, self, aux) 156 struct device *parent, *self; 157 void *aux; 158 { 159 struct es_softc *sc = (void *)self; 160 struct zbus_args *zap = aux; 161 struct ifnet *ifp = &sc->sc_arpcom.ac_if; 162 unsigned long ser; 163 164 sc->sc_base = zap->va; 165 #ifdef ESDEBUG 166 /* MLHDEBUG 167 * MLHDEBUG remove first 4 and last 3 pages of the A4066 memory 168 * MLHDEBUG and use the 5th page to access the SMC 169 */ 170 sc->sc_base = zap->va + 0x8000; /* MLHDEBUG */ 171 physunaccess(zap->va, 0x8000); /* MLHDEBUG */ 172 physunaccess(zap->va + 0xa000, 0x6000); /* MLHDEBUG */ 173 #endif 174 175 /* 176 * Manufacturer decides the 3 first bytes, i.e. ethernet vendor ID. 177 * (Currently only Ameristar.) 178 */ 179 sc->sc_arpcom.ac_enaddr[0] = 0x00; 180 sc->sc_arpcom.ac_enaddr[1] = 0x00; 181 sc->sc_arpcom.ac_enaddr[2] = 0x9f; 182 183 /* 184 * Serial number for board contains last 3 bytes. 185 */ 186 ser = (unsigned long) zap->serno; 187 188 sc->sc_arpcom.ac_enaddr[3] = (ser >> 16) & 0xff; 189 sc->sc_arpcom.ac_enaddr[4] = (ser >> 8) & 0xff; 190 sc->sc_arpcom.ac_enaddr[5] = (ser ) & 0xff; 191 192 /* Initialize ifnet structure. */ 193 ifp->if_unit = sc->sc_dev.dv_unit; 194 ifp->if_name = es_cd.cd_name; 195 ifp->if_output = ether_output; 196 ifp->if_ioctl = esioctl; 197 ifp->if_start = esstart; 198 ifp->if_watchdog = eswatchdog; 199 /* XXX IFF_MULTICAST */ 200 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS; 201 202 /* Attach the interface. */ 203 if_attach(ifp); 204 ether_ifattach(ifp); 205 206 /* Print additional info when attached. */ 207 printf(": address %s\n", ether_sprintf(sc->sc_arpcom.ac_enaddr)); 208 209 #if NBPFILTER > 0 210 bpfattach(&ifp->if_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); 211 #endif 212 213 sc->sc_isr.isr_intr = esintr; 214 sc->sc_isr.isr_arg = sc; 215 sc->sc_isr.isr_ipl = 2; 216 add_isr(&sc->sc_isr); 217 } 218 219 #ifdef ESDEBUG 220 void 221 es_dump_smcregs(where, smc) 222 char *where; 223 union smcregs *smc; 224 { 225 u_short cur_bank = smc->b0.bsr & 0x0300; 226 227 printf("SMC registers %08x from %s bank %04x\n", smc, where, 228 smc->b0.bsr); 229 smc->b0.bsr = BSR_BANK0; 230 printf("TCR %04x EPHSR %04x RCR %04x ECR %04x MIR %04x MCR %04x\n", 231 SWAP(smc->b0.tcr), SWAP(smc->b0.ephsr), SWAP(smc->b0.rcr), 232 SWAP(smc->b0.ecr), SWAP(smc->b0.mir), SWAP(smc->b0.mcr)); 233 smc->b1.bsr = BSR_BANK1; 234 printf("CR %04x BAR %04x IAR %04x %04x %04x GPR %04x CTR %04x\n", 235 SWAP(smc->b1.cr), SWAP(smc->b1.bar), smc->b1.iar[0], smc->b1.iar[1], 236 smc->b1.iar[2], smc->b1.gpr, SWAP(smc->b1.ctr)); 237 smc->b2.bsr = BSR_BANK2; 238 printf("MMUCR %04x PNR %02x ARR %02x FIFO %04x PTR %04x", 239 SWAP(smc->b2.mmucr), smc->b2.pnr, smc->b2.arr, smc->b2.fifo, 240 SWAP(smc->b2.ptr)); 241 printf(" DATA %04x %04x IST %02x MSK %02x\n", smc->b2.data, 242 smc->b2.datax, smc->b2.ist, smc->b2.msk); 243 smc->b3.bsr = BSR_BANK3; 244 printf("MT %04x %04x %04x %04x\n", 245 smc->b3.mt[0], smc->b3.mt[1], smc->b3.mt[2], smc->b3.mt[3]); 246 smc->b3.bsr = cur_bank; 247 } 248 #endif 249 250 void 251 esstop(sc) 252 struct es_softc* sc; 253 { 254 } 255 256 void 257 esinit(sc) 258 struct es_softc *sc; 259 { 260 struct ifnet *ifp = &sc->sc_arpcom.ac_if; 261 union smcregs *smc = sc->sc_base; 262 int s; 263 264 s = splnet(); 265 266 #ifdef ESDEBUG 267 if (ifp->if_flags & IFF_RUNNING) 268 es_dump_smcregs("esinit", smc); 269 #endif 270 smc->b0.bsr = BSR_BANK0; /* Select bank 0 */ 271 smc->b0.rcr = RCR_EPH_RST; 272 smc->b0.rcr = 0; 273 smc->b3.bsr = BSR_BANK3; /* Select bank 3 */ 274 smc->b3.mt[0] = 0; /* clear Multicast table */ 275 smc->b3.mt[1] = 0; 276 smc->b3.mt[2] = 0; 277 smc->b3.mt[3] = 0; 278 /* XXX set Multicast table from Multicast list */ 279 smc->b1.bsr = BSR_BANK1; /* Select bank 1 */ 280 smc->b1.cr = CR_RAM32K | CR_NO_WAIT_ST | CR_SET_SQLCH; 281 smc->b1.ctr = CTR_AUTO_RLSE; 282 smc->b1.iar[0] = *((unsigned short *) &sc->sc_arpcom.ac_enaddr[0]); 283 smc->b1.iar[1] = *((unsigned short *) &sc->sc_arpcom.ac_enaddr[2]); 284 smc->b1.iar[2] = *((unsigned short *) &sc->sc_arpcom.ac_enaddr[4]); 285 smc->b2.bsr = BSR_BANK2; /* Select bank 2 */ 286 smc->b2.mmucr = MMUCR_RESET; 287 smc->b0.bsr = BSR_BANK0; /* Select bank 0 */ 288 smc->b0.mcr = SWAP(0x0020); /* reserve 8K for transmit buffers */ 289 smc->b0.tcr = TCR_PAD_EN | TCR_TXENA + TCR_MON_CSN; 290 smc->b0.rcr = RCR_FILT_CAR | RCR_STRIP_CRC | RCR_RXEN; 291 /* XXX add multicast/promiscuous flags */ 292 smc->b2.bsr = BSR_BANK2; /* Select bank 2 */ 293 smc->b2.msk = sc->sc_intctl = MSK_RX_OVRN | MSK_RX; 294 295 /* Interface is now 'running', with no output active. */ 296 ifp->if_flags |= IFF_RUNNING; 297 ifp->if_flags &= ~IFF_OACTIVE; 298 299 /* Attempt to start output, if any. */ 300 esstart(ifp); 301 302 splx(s); 303 } 304 305 int 306 esintr(sc) 307 struct es_softc *sc; 308 { 309 int i; 310 u_short intsts, intact; 311 union smcregs *smc; 312 int s = splnet(); 313 314 smc = sc->sc_base; 315 #ifdef ESDEBUG 316 while ((smc->b2.bsr & 0x0300) != BSR_BANK2 && 317 sc->sc_arpcom.ac_if.if_flags & IFF_RUNNING) { 318 printf("%s: intr BSR not 2: %04x\n", sc->sc_dev.dv_xname, 319 smc->b2.bsr); 320 smc->b2.bsr = BSR_BANK2; 321 } 322 #endif 323 intsts = smc->b2.ist; 324 intact = smc->b2.msk & intsts; 325 if ((intact) == 0) { 326 splx(s); 327 return (0); 328 } 329 #ifdef ESDEBUG 330 if (esdebug) 331 printf ("%s: esintr ist %02x msk %02x", 332 sc->sc_dev.dv_xname, intsts, smc->b2.msk); 333 if (sc->sc_intbusy++) { 334 printf("%s: esintr re-entered\n", sc->sc_dev.dv_xname); 335 panic("esintr re-entered"); 336 } 337 #endif 338 smc->b2.msk = 0; 339 #ifdef ESDEBUG 340 if (esdebug) 341 printf ("=>%02x%02x pnr %02x arr %02x fifo %04x\n", 342 smc->b2.ist, smc->b2.ist, smc->b2.pnr, smc->b2.arr, 343 smc->b2.fifo); 344 #endif 345 if (intact & IST_ALLOC) { 346 sc->sc_intctl &= ~MSK_ALLOC; 347 #ifdef ESDEBUG 348 if (esdebug || 1) 349 printf ("%s: ist %02x", sc->sc_dev.dv_xname, 350 intsts); 351 #endif 352 if ((smc->b2.arr & ARR_FAILED) == 0) { 353 u_char save_pnr; 354 #ifdef ESDEBUG 355 if (esdebug || 1) 356 printf (" arr %02x\n", smc->b2.arr); 357 #endif 358 save_pnr = smc->b2.pnr; 359 smc->b2.pnr = smc->b2.arr; 360 smc->b2.mmucr = MMUCR_RLSPKT; 361 while (smc->b2.mmucr & MMUCR_BUSY) 362 ; 363 smc->b2.pnr = save_pnr; 364 sc->sc_arpcom.ac_if.if_flags &= ~IFF_OACTIVE; 365 } 366 #ifdef ESDEBUG 367 else if (esdebug || 1) 368 printf (" IST_ALLOC with ARR_FAILED?\n"); 369 #endif 370 } 371 #ifdef ESDEBUG 372 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 373 printf("%s: intr+ BSR not 2: %04x\n", sc->sc_dev.dv_xname, 374 smc->b2.bsr); 375 smc->b2.bsr = BSR_BANK2; 376 } 377 #endif 378 while ((smc->b2.fifo & FIFO_REMPTY) == 0) { 379 esrint(sc); 380 } 381 #ifdef ESDEBUG 382 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 383 printf("%s: intr++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, 384 smc->b2.bsr); 385 smc->b2.bsr = BSR_BANK2; 386 } 387 #endif 388 if (intact & IST_RX_OVRN) { 389 printf ("%s: Overrun ist %02x", sc->sc_dev.dv_xname, 390 intsts); 391 smc->b2.ist = ACK_RX_OVRN; 392 printf ("->%02x\n", smc->b2.ist); 393 sc->sc_arpcom.ac_if.if_ierrors++; 394 } 395 if (intact & IST_TX_EMPTY) { 396 u_short ecr; 397 #ifdef ESDEBUG 398 if (esdebug) 399 printf ("%s: TX EMPTY %02x", 400 sc->sc_dev.dv_xname, intsts); 401 ++estxint5; /* count # IST_TX_EMPTY ints */ 402 #endif 403 smc->b2.ist = ACK_TX_EMPTY; 404 sc->sc_intctl &= ~(MSK_TX_EMPTY | MSK_TX); 405 #ifdef ESDEBUG 406 if (esdebug) 407 printf ("->%02x intcl %x pnr %02x arr %02x\n", 408 smc->b2.ist, sc->sc_intctl, smc->b2.pnr, 409 smc->b2.arr); 410 #endif 411 if (smc->b2.ist & IST_TX) { 412 intact |= IST_TX; 413 #ifdef ESDEBUG 414 ++estxint2; /* count # TX after TX_EMPTY */ 415 #endif 416 } else { 417 smc->b0.bsr = BSR_BANK0; 418 ecr = smc->b0.ecr; /* Get error counters */ 419 if (ecr & 0xff00) 420 sc->sc_arpcom.ac_if.if_collisions += ((ecr >> 8) & 15) + 421 ((ecr >> 11) & 0x1e); 422 smc->b2.bsr = BSR_BANK2; 423 #if 0 424 smc->b2.mmucr = MMUCR_RESET_TX; /* XXX reset TX FIFO */ 425 #endif 426 } 427 } 428 if (intact & IST_TX) { 429 u_char tx_pnr, save_pnr; 430 u_short save_ptr, ephsr, tcr; 431 int n = 0; 432 #ifdef ESDEBUG 433 if (esdebug) { 434 printf ("%s: TX INT ist %02x", 435 sc->sc_dev.dv_xname, intsts); 436 printf ("->%02x\n", smc->b2.ist); 437 } 438 ++estxint3; /* count # IST_TX */ 439 #endif 440 zzzz: 441 ++estxint4; /* count # ~TEMPTY */ 442 smc->b0.bsr = BSR_BANK0; 443 ephsr = smc->b0.ephsr; /* get EPHSR */ 444 tcr = smc->b0.tcr; /* and TCR */ 445 smc->b2.bsr = BSR_BANK2; 446 save_ptr = smc->b2.ptr; 447 save_pnr = smc->b2.pnr; 448 tx_pnr = smc->b2.fifo >> 8; /* pktno from completion fifo */ 449 smc->b2.pnr = tx_pnr; /* set TX packet number */ 450 smc->b2.ptr = PTR_READ; /* point to status word */ 451 #if 0 /* XXXX */ 452 printf("%s: esintr TXINT IST %02x PNR %02x(%d)", 453 sc->sc_dev.dv_xname, smc->b2.ist, 454 tx_pnr, n); 455 printf(" Status %04x", smc->b2.data); 456 printf(" EPHSR %04x\n", ephsr); 457 #endif 458 if ((smc->b2.data & EPHSR_TX_SUC) == 0 && (tcr & TCR_TXENA) == 0) { 459 /* 460 * Transmitter was stopped for some error. Enqueue 461 * the packet again and restart the transmitter. 462 * May need some check to limit the number of retries. 463 */ 464 smc->b2.mmucr = MMUCR_ENQ_TX; 465 smc->b0.bsr = BSR_BANK0; 466 smc->b0.tcr |= TCR_TXENA; 467 smc->b2.bsr = BSR_BANK2; 468 sc->sc_arpcom.ac_if.if_oerrors++; 469 sc->sc_intctl |= MSK_TX_EMPTY | MSK_TX; 470 } else { 471 /* 472 * This shouldn't have happened: IST_TX indicates 473 * the TX completion FIFO is not empty, but the 474 * status for the packet on the completion FIFO 475 * shows that the transmit was sucessful. Since 476 * AutoRelease is being used, a sucessful transmit 477 * should not result in a packet on the completion 478 * FIFO. Also, that packet doesn't seem to want 479 * to be acknowledged. If this occurs, just reset 480 * the TX FIFOs. 481 */ 482 #if 1 483 if (smc->b2.ist & IST_TX_EMPTY) { 484 smc->b2.mmucr = MMUCR_RESET_TX; 485 sc->sc_intctl &= ~(MSK_TX_EMPTY | MSK_TX); 486 } 487 #endif 488 #ifdef ESDEBUG 489 ++estxints; /* count IST_TX with TX enabled */ 490 #endif 491 } 492 smc->b2.pnr = save_pnr; 493 smc->b2.ptr = save_ptr; 494 smc->b2.ist = ACK_TX; 495 496 if ((smc->b2.fifo & FIFO_TEMPTY) == 0 && n++ < 32) { 497 #if 0 /* XXXX */ 498 printf("%s: multiple TX int(%2d) pnr %02x ist %02x fifo %04x", 499 sc->sc_dev.dv_xname, n, tx_pnr, smc->b2.ist, smc->b2.fifo); 500 smc->w2.istmsk = ACK_TX << 8; 501 printf(" %04x\n", smc->b2.fifo); 502 #endif 503 if (tx_pnr != (smc->b2.fifo >> 8)) 504 goto zzzz; 505 } 506 } 507 /* output packets */ 508 estint(sc); 509 #ifdef ESDEBUG 510 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 511 printf("%s: intr+++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, 512 smc->b2.bsr); 513 smc->b2.bsr = BSR_BANK2; 514 } 515 #endif 516 smc->b2.msk = sc->sc_intctl; 517 #ifdef ESDEBUG 518 if (--sc->sc_intbusy) { 519 printf("%s: esintr busy on exit\n", sc->sc_dev.dv_xname); 520 panic("esintr busy on exit"); 521 } 522 #endif 523 splx(s); 524 return (1); 525 } 526 527 void 528 esrint(sc) 529 struct es_softc *sc; 530 { 531 union smcregs *smc = sc->sc_base; 532 int i; 533 u_short len; 534 short cnt; 535 u_short pktctlw, pktlen, *buf; 536 u_long *lbuf; 537 volatile u_short *data; 538 volatile u_long *ldata; 539 struct ifnet *ifp; 540 struct mbuf *top, **mp, *m; 541 struct ether_header *eh; 542 #ifdef USEPKTBUF 543 u_char *b, pktbuf[1530]; 544 #endif 545 546 #ifdef ESDEBUG 547 if (esdebug) 548 printf ("%s: esrint fifo %04x", sc->sc_dev.dv_xname, 549 smc->b2.fifo); 550 if (sc->sc_smcbusy++) { 551 printf("%s: esrint re-entered\n"); 552 panic("esrint re-entered"); 553 } 554 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 555 printf("%s: rint BSR not 2: %04x\n", sc->sc_dev.dv_xname, 556 smc->b2.bsr); 557 smc->b2.bsr = BSR_BANK2; 558 } 559 #endif 560 data = (u_short *)&smc->b2.data; 561 smc->b2.ptr = PTR_RCV | PTR_AUTOINCR | PTR_READ | SWAP(0x0002); 562 (void) smc->b2.mmucr; 563 #ifdef ESDEBUG 564 if (esdebug) 565 printf ("->%04x", smc->b2.fifo); 566 #endif 567 len = *data; 568 len = SWAP(len); /* Careful of macro side-effects */ 569 #ifdef ESDEBUG 570 if (esdebug) 571 printf (" length %d", len); 572 #endif 573 smc->b2.ptr = PTR_RCV | PTR_AUTOINCR + PTR_READ | SWAP(0x0000); 574 (void) smc->b2.mmucr; 575 pktctlw = *data; 576 pktlen = *data; 577 pktctlw = SWAP(pktctlw); 578 pktlen = SWAP(pktlen) - 6; 579 if (pktctlw & RFSW_ODDFRM) 580 pktlen++; 581 if (len > 1530) { 582 printf("%s: Corrupted packet length-sts %04x bytcnt %04x len %04x bank %04x\n", 583 sc->sc_dev.dv_xname, pktctlw, pktlen, len, smc->b2.bsr); 584 /* XXX ignore packet, or just truncate? */ 585 #if defined(ESDEBUG) && defined(DDB) 586 if ((smc->b2.bsr & 0x0300) != BSR_BANK2) 587 Debugger(); 588 #endif 589 smc->b2.bsr = BSR_BANK2; 590 smc->b2.mmucr = MMUCR_REMRLS_RX; 591 while (smc->b2.mmucr & MMUCR_BUSY) 592 ; 593 ++sc->sc_arpcom.ac_if.if_ierrors; 594 #ifdef ESDEBUG 595 if (--sc->sc_smcbusy) { 596 printf("%s: esrintr busy on bad packet exit\n", 597 sc->sc_dev.dv_xname); 598 panic("esrintr busy on exit"); 599 } 600 #endif 601 return; 602 } 603 #ifdef USEPKTBUF 604 #if 0 605 lbuf = (u_long *) pktbuf; 606 ldata = (u_long *)data; 607 cnt = (len - 4) / 4; 608 while (cnt--) 609 *lbuf++ = *ldata; 610 if ((len - 4) & 2) { 611 buf = (u_short *) lbuf; 612 *buf = *data; 613 } 614 #else 615 buf = (u_short *)pktbuf; 616 cnt = (len - 4) / 2; 617 while (cnt--) 618 *buf++ = *data; 619 #endif 620 smc->b2.mmucr = MMUCR_REMRLS_RX; 621 while (smc->b2.mmucr & MMUCR_BUSY) 622 ; 623 #ifdef ESDEBUG 624 if (pktctlw & (RFSW_ALGNERR | RFSW_BADCRC | RFSW_TOOLNG | RFSW_TOOSHORT)) { 625 printf ("%s: Packet error %04x\n", sc->sc_dev.dv_xname, pktctlw); 626 /* count input error? */ 627 } 628 if (esdebug) { 629 printf (" pktctlw %04x pktlen %04x fifo %04x\n", pktctlw, pktlen, 630 smc->b2.fifo); 631 for (i = 0; i < pktlen; ++i) 632 printf ("%02x%s", pktbuf[i], ((i & 31) == 31) ? "\n" : 633 ""); 634 if (i & 31) 635 printf ("\n"); 636 } 637 #endif 638 #else /* USEPKTBUF */ 639 /* XXX copy directly from controller to mbuf */ 640 #ifdef ESDEBUG 641 if (pktctlw & (RFSW_ALGNERR | RFSW_BADCRC | RFSW_TOOLNG | RFSW_TOOSHORT)) { 642 printf ("%s: Packet error %04x\n", sc->sc_dev.dv_xname, pktctlw); 643 /* count input error? */ 644 } 645 if (esdebug) { 646 printf (" pktctlw %04x pktlen %04x fifo %04x\n", pktctlw, pktlen, 647 smc->b2.fifo); 648 } 649 #endif 650 #endif /* USEPKTBUF */ 651 ifp = &sc->sc_arpcom.ac_if; 652 ifp->if_ipackets++; 653 MGETHDR(m, M_DONTWAIT, MT_DATA); 654 if (m == NULL) 655 return; 656 m->m_pkthdr.rcvif = ifp; 657 m->m_pkthdr.len = pktlen; 658 len = MHLEN; 659 top = NULL; 660 mp = ⊤ 661 #ifdef USEPKTBUF 662 b = pktbuf; 663 #endif 664 while (pktlen > 0) { 665 if (top) { 666 MGET(m, M_DONTWAIT, MT_DATA); 667 if (m == 0) { 668 m_freem(top); 669 return; 670 } 671 len = MLEN; 672 } 673 if (pktlen >= MINCLSIZE) { 674 MCLGET(m, M_DONTWAIT); 675 if (m->m_flags & M_EXT) 676 len = MCLBYTES; 677 } 678 m->m_len = len = min(pktlen, len); 679 #ifdef USEPKTBUF 680 bcopy((caddr_t)b, mtod(m, caddr_t), len); 681 b += len; 682 #else /* USEPKTBUF */ 683 buf = mtod(m, u_short *); 684 cnt = len / 2; 685 while (cnt--) 686 *buf++ = *data; 687 if (len & 1) 688 *buf = *data; /* XXX should be byte store */ 689 #ifdef ESDEBUG 690 if (esdebug) { 691 buf = mtod(m, u_short *); 692 for (i = 0; i < len; ++i) 693 printf ("%02x%s", ((u_char *)buf)[i], 694 ((i & 31) == 31) ? "\n" : ""); 695 if (i & 31) 696 printf ("\n"); 697 } 698 #endif 699 #endif /* USEPKTBUF */ 700 pktlen -= len; 701 *mp = m; 702 mp = &m->m_next; 703 } 704 #ifndef USEPKTBUF 705 smc->b2.mmucr = MMUCR_REMRLS_RX; 706 while (smc->b2.mmucr & MMUCR_BUSY) 707 ; 708 #endif 709 eh = mtod(top, struct ether_header *); 710 #if NBPFILTER > 0 711 /* 712 * Check if there's a BPF listener on this interface. If so, hand off 713 * the raw packet to bpf. 714 */ 715 if (sc->sc_arpcom.ac_if.if_bpf) { 716 bpf_mtap(sc->sc_arpcom.ac_if.if_bpf, top); 717 718 /* 719 * Note that the interface cannot be in promiscuous mode if 720 * there are no BPF listeners. And if we are in promiscuous 721 * mode, we have to check if this packet is really ours. 722 */ 723 if ((sc->sc_arpcom.ac_if.if_flags & IFF_PROMISC) && 724 (eh->ether_dhost[0] & 1) == 0 && /* !mcast and !bcast */ 725 bcmp(eh->ether_dhost, sc->sc_arpcom.ac_enaddr, 726 sizeof(eh->ether_dhost)) != 0) { 727 m_freem(top); 728 return; 729 } 730 } 731 #endif 732 top->m_pkthdr.len -= sizeof (*eh); 733 top->m_len -= sizeof (*eh); 734 top->m_data += sizeof (*eh); 735 736 ether_input(ifp, eh, top); 737 #ifdef ESDEBUG 738 if (--sc->sc_smcbusy) { 739 printf("%s: esintr busy on exit\n", sc->sc_dev.dv_xname); 740 panic("esintr busy on exit"); 741 } 742 #endif 743 } 744 745 void 746 estint(sc) 747 struct es_softc *sc; 748 { 749 750 esstart(&sc->sc_arpcom.ac_if); 751 } 752 753 void 754 esstart(ifp) 755 struct ifnet *ifp; 756 { 757 struct es_softc *sc = es_cd.cd_devs[ifp->if_unit]; 758 union smcregs *smc = sc->sc_base; 759 struct mbuf *m0, *m; 760 #ifdef USEPKTBUF 761 u_short pktbuf[ETHERMTU + 2]; 762 #else 763 u_short oddbyte, needbyte; 764 #endif 765 u_short pktctlw, pktlen; 766 u_short *buf; 767 volatile u_short *data; 768 u_long *lbuf; 769 volatile u_long *ldata; 770 short cnt; 771 int i; 772 u_char active_pnr; 773 774 if ((sc->sc_arpcom.ac_if.if_flags & (IFF_RUNNING | IFF_OACTIVE)) != 775 IFF_RUNNING) 776 return; 777 778 #ifdef ESDEBUG 779 if (sc->sc_smcbusy++) { 780 printf("%s: esstart re-entered\n", sc->sc_dev.dv_xname); 781 panic("esstart re-entred"); 782 } 783 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 784 printf("%s: esstart BSR not 2: %04x\n", sc->sc_dev.dv_xname, 785 smc->b2.bsr); 786 smc->b2.bsr = BSR_BANK2; 787 } 788 #endif 789 for (;;) { 790 int xxx; 791 /* 792 * Sneak a peek at the next packet to get the length 793 * and see if the SMC 91C90 can accept it. 794 */ 795 m = sc->sc_arpcom.ac_if.if_snd.ifq_head; 796 if (!m) 797 break; 798 #ifdef ESDEBUG 799 if (esdebug && (m->m_next || m->m_len & 1)) 800 printf("%s: esstart m_next %x m_len %d\n", sc->sc_dev.dv_xname, 801 m->m_next, m->m_len); 802 #endif 803 for (m0 = m, pktlen = 0; m0; m0 = m0->m_next) 804 pktlen += m0->m_len; 805 pktctlw = 0; 806 pktlen += 4; 807 if (pktlen & 1) 808 ++pktlen; /* control byte after last byte */ 809 else 810 pktlen += 2; /* control byte after pad byte */ 811 smc->b2.mmucr = MMUCR_ALLOC | (pktlen & 0x0700); 812 for (i = 0; i <= 5; ++i) 813 if ((smc->b2.arr & ARR_FAILED) == 0) 814 break; 815 if (smc->b2.arr & ARR_FAILED) { 816 sc->sc_arpcom.ac_if.if_flags |= IFF_OACTIVE; 817 sc->sc_intctl |= MSK_ALLOC; 818 break; 819 } 820 active_pnr = smc->b2.pnr = smc->b2.arr; 821 822 #ifdef ESDEBUG 823 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 824 printf("%s: esstart+ BSR not 2: %04x\n", sc->sc_dev.dv_xname, 825 smc->b2.bsr); 826 smc->b2.bsr = BSR_BANK2; 827 } 828 #endif 829 IF_DEQUEUE(&sc->sc_arpcom.ac_if.if_snd, m); 830 xxx = splhigh(); 831 smc->b2.ptr = PTR_AUTOINCR; 832 (void) smc->b2.mmucr; 833 data = (u_short *)&smc->b2.data; 834 *data = SWAP(pktctlw); 835 *data = SWAP(pktlen); 836 #ifdef ESDEBUG 837 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 838 printf("%s: esstart++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, 839 smc->b2.bsr); 840 smc->b2.bsr = BSR_BANK2; 841 } 842 #endif 843 #ifdef USEPKTBUF 844 i = 0; 845 for (m0 = m; m; m = m->m_next) { 846 bcopy(mtod(m, caddr_t), (char *)pktbuf + i, m->m_len); 847 i += m->m_len; 848 } 849 850 if (i & 1) /* Figure out where to put control byte */ 851 pktbuf[i/2] = (pktbuf[i/2] & 0xff00) | CTLB_ODD; 852 else 853 pktbuf[i/2] = 0; 854 pktlen -= 4; 855 #ifdef ESDEBUG 856 if (pktlen > sizeof(pktbuf)) 857 printf("%s: esstart packet longer than pktbuf\n", 858 sc->sc_dev.dv_xname); 859 #endif 860 #if 0 /* doesn't quite work? */ 861 lbuf = (u_long *)(pktbuf); 862 ldata = (u_long *)data; 863 cnt = pktlen / 4; 864 while(cnt--) 865 *ldata = *lbuf++; 866 if (pktlen & 2) { 867 buf = (u_short *)lbuf; 868 *data = *buf; 869 } 870 #else 871 buf = pktbuf; 872 cnt = pktlen / 2; 873 while (cnt--) 874 *data = *buf++; 875 #endif 876 #else /* USEPKTBUF */ 877 pktctlw = 0; 878 oddbyte = needbyte = 0; 879 for (m0 = m; m; m = m->m_next) { 880 buf = mtod(m, u_short *); 881 cnt = m->m_len / 2; 882 if (needbyte) { 883 oddbyte |= *buf >> 8; 884 *data = oddbyte; 885 } 886 while (cnt--) 887 *data = *buf++; 888 if (m->m_len & 1) 889 pktctlw = (*buf & 0xff00) | CTLB_ODD; 890 if (m->m_len & 1 && m->m_next) 891 printf("%s: esstart odd byte count in mbuf\n", 892 sc->sc_dev.dv_xname); 893 } 894 *data = pktctlw; 895 #endif /* USEPKTBUF */ 896 splx(xxx); 897 #ifdef ESDEBUG 898 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 899 printf("%s: esstart+++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, 900 smc->b2.bsr); 901 smc->b2.bsr = BSR_BANK2; 902 } 903 #endif 904 smc->b2.mmucr = MMUCR_ENQ_TX; 905 if (smc->b2.pnr != active_pnr) 906 printf("%s: esstart - PNR changed %x->%x\n", 907 sc->sc_dev.dv_xname, active_pnr, smc->b2.pnr); 908 #if NBPFILTER > 0 909 if (sc->sc_arpcom.ac_if.if_bpf) 910 bpf_mtap(sc->sc_arpcom.ac_if.if_bpf, m0); 911 #endif 912 m_freem(m0); 913 sc->sc_arpcom.ac_if.if_opackets++; /* move to interrupt? */ 914 sc->sc_intctl |= MSK_TX_EMPTY | MSK_TX; 915 } 916 smc->b2.msk = sc->sc_intctl; 917 #ifdef ESDEBUG 918 while ((smc->b2.bsr & 0x0300) != BSR_BANK2) { 919 printf("%s: esstart++++ BSR not 2: %04x\n", sc->sc_dev.dv_xname, 920 smc->b2.bsr); 921 smc->b2.bsr = BSR_BANK2; 922 } 923 if (--sc->sc_smcbusy) { 924 printf("%s: esstart busy on exit\n", sc->sc_dev.dv_xname); 925 panic("esstart busy on exit"); 926 } 927 #endif 928 } 929 930 int 931 esioctl(ifp, command, data) 932 register struct ifnet *ifp; 933 u_long command; 934 caddr_t data; 935 { 936 struct es_softc *sc = es_cd.cd_devs[ifp->if_unit]; 937 register struct ifaddr *ifa = (struct ifaddr *)data; 938 struct ifreq *ifr = (struct ifreq *)data; 939 int s, error = 0; 940 941 s = splnet(); 942 943 switch (command) { 944 945 case SIOCSIFADDR: 946 ifp->if_flags |= IFF_UP; 947 948 switch (ifa->ifa_addr->sa_family) { 949 #ifdef INET 950 case AF_INET: 951 esinit(sc); 952 arp_ifinit(&sc->sc_arpcom, ifa); 953 break; 954 #endif 955 #ifdef NS 956 case AF_NS: 957 { 958 register struct ns_addr *ina = &IA_SNS(ifa)->sns_addr; 959 960 if (ns_nullhost(*ina)) 961 ina->x_host = 962 *(union ns_host *)(sc->sc_arpcom.ac_enaddr); 963 else 964 bcopy(ina->x_host.c_host, 965 sc->sc_arpcom.ac_enaddr, 966 sizeof(sc->sc_arpcom.ac_enaddr)); 967 /* Set new address. */ 968 esinit(sc); 969 break; 970 #endif 971 default: 972 esinit(sc); 973 break; 974 } 975 break; 976 977 case SIOCSIFFLAGS: 978 /* 979 * If interface is marked down and it is running, then stop it 980 */ 981 if ((ifp->if_flags & IFF_UP) == 0 && 982 (ifp->if_flags & IFF_RUNNING) != 0) { 983 /* 984 * If interface is marked down and it is running, then 985 * stop it. 986 */ 987 esstop(sc); 988 ifp->if_flags &= ~IFF_RUNNING; 989 } else if ((ifp->if_flags & IFF_UP) != 0 && 990 (ifp->if_flags & IFF_RUNNING) == 0) { 991 /* 992 * If interface is marked up and it is stopped, then 993 * start it. 994 */ 995 esinit(sc); 996 } else { 997 /* 998 * Reset the interface to pick up changes in any other 999 * flags that affect hardware registers. 1000 */ 1001 esstop(sc); 1002 esinit(sc); 1003 } 1004 #ifdef ESDEBUG 1005 if (ifp->if_flags & IFF_DEBUG) 1006 esdebug = sc->sc_debug = 1; 1007 else 1008 esdebug = sc->sc_debug = 0; 1009 #endif 1010 break; 1011 1012 case SIOCADDMULTI: 1013 case SIOCDELMULTI: 1014 error = (command == SIOCADDMULTI) ? 1015 ether_addmulti(ifr, &sc->sc_arpcom) : 1016 ether_delmulti(ifr, &sc->sc_arpcom); 1017 1018 if (error == ENETRESET) { 1019 /* 1020 * Multicast list has changed; set the hardware filter 1021 * accordingly. 1022 */ 1023 /* XXX */ 1024 error = 0; 1025 } 1026 break; 1027 1028 default: 1029 error = EINVAL; 1030 } 1031 1032 splx(s); 1033 return (error); 1034 } 1035 1036 void 1037 esreset(sc) 1038 struct es_softc *sc; 1039 { 1040 int s; 1041 1042 s = splnet(); 1043 esstop(sc); 1044 esinit(sc); 1045 splx(s); 1046 } 1047 1048 void 1049 eswatchdog(unit) 1050 int unit; 1051 { 1052 struct es_softc *sc = es_cd.cd_devs[unit]; 1053 1054 log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname); 1055 ++sc->sc_arpcom.ac_if.if_oerrors; 1056 1057 esreset(sc); 1058 } 1059
Indexes created Mon Sep 29 21:09:56 GMT 2025